Script_Algo - Pivot Trend Rider Strategy📌 This strategy aims to enter a trade in the direction of the trend, catching a reversal point at the end of a correction.
The script is unique due to the combination of three key elements:
🔹 Detection of reversal points through searching for local lows and highs
🔹 Trend filter based on SMA for trading only in the trend direction
🔹 Adaptive risk management using ATR for dynamic stop-losses and take-profits
This allows the strategy to work effectively in various market conditions, minimizing false signals and adapting to market volatility.
⚙️ Principle of Operation
The strategy is based on the following logical components:
📈 Entry Signals:
Long: when a local low (pivot low) is detected in an uptrend
Short: when a local high (pivot high) is detected in a downtrend
📉 Position Management:
Stop-loss and take-profit are calculated based on ATR
Automatic reverse switching when an opposite signal appears
📊 Trend Filter:
Uses SMA to determine trend direction (can be disabled if needed)
🔧 Default Settings
Pivot detection: 11 bars
SMA filter length: 16 periods
ATR period: 14
SL multiplier: 2.5
TP multiplier: 10
Trend filter: enabled
🕒 Usage Recommendations
Timeframe: from 1 hour and above
Assets: cryptocurrency pairs, stocks
🤖 Trading Automation
This script is fully ready for integration with cryptocurrency exchanges via Webhook.
📊 Backtest Results
As seen from testing results, over 4.5 years this strategy could have potentially generated about $5000 profit or 50% of initial capital on the NAERUSDT crypto pair on the 4H timeframe.
Position size: $1000
Max drawdown: $1400
Total trades: 376
Win rate: 38%
Profit factor: 1.34
⚠️ Disclaimer
Please note that the results of the strategy are not guaranteed to repeat in the future. The market constantly changes, and no algorithm can predict exactly how an asset will behave.
The author of this strategy is not responsible for any financial losses associated with using this script.
All trading decisions are made solely by the user.
Trading financial markets carries high risks and can lead to loss of your investments.
Before using the strategy, it is strongly recommended to:
✅ Backtest the strategy on historical data
✅ Start with small trading volumes
✅ Use only risk capital you are ready to lose
✅ Fully understand how the strategy works
🔮 Further Development
The strategy will continue to evolve and improve. Planned updates include:
Adding additional filters to reduce false signals
Optimizing position management algorithms
Expanding functionality for various market conditions
💡 Wishing everyone good luck and profitable trading!
📈 May your charts be green and your portfolios keep growing!
Developed by Script_Algo | MIT License | Version 1.0
트렌드 어낼리시스
CryptoThunder Storm v1.21CryptoThunder Storm v1.21 — Strategy (non-repainting, HTF-aware)
CryptoThunder Storm is a Pine v6 strategy that trades the cross of two moving-average variants computed on an alternate (higher) timeframe derived from your current chart. It’s built to be non-repainting by evaluating signals only at HTF bar boundaries and by avoiding lookahead. The script can trade LONG, SHORT, BOTH, or be disabled, and it includes a one-click invert Long/Short mode.
How it works
Two MA streams (Open/Close series).
You can choose from multiple MA types (SMA/EMA/DEMA/TEMA/WMA/VWMA/SMMA/Hull/LSMA/ALMA/SSMA/TMA). The script computes:
closeSeries – MA of the (possibly delayed) close
openSeries – MA of the (possibly delayed) open
Alternate Resolution (HTF).
The inputs allow you to multiply your current chart’s timeframe (e.g., on 5m with multiplier 3 → HTF = 15m). Both series are requested via request.security() with lookahead_off.
Non-repainting gating.
Signals are evaluated once per HTF bar (htfClosed gate). This ensures entries/alerts are aligned with HTF boundaries and prevents forward-shifting.
Entry logic.
Long when closeSeriesAlt crosses above openSeriesAlt.
Short when closeSeriesAlt crosses below openSeriesAlt.
Invert mode swaps these actions (a former long signal opens a short, and vice versa).
Orders are processed on bar close (process_orders_on_close=true).
Risk management (optional).
Optional initial TP/SL exits via strategy.exit() (ticks/points). Set 0 to disable.
Visuals.
The script colors bars (optional) and plots the two HTF series with a filled band, plus compact UP/DN/CL markers that match the executed side after inversion/filtering.
Inputs & configuration
Use Alternate Resolution?
Turns the HTF logic on/off. When off, the strategy uses the chart timeframe.
Multiplier for Alternate Resolution
Multiplies the current timeframe to form the HTF (e.g., 3×).
MA Type / Period / Offsets
MA Type — choose from 12 variants.
MA Period — core length.
Offset for LSMA / Sigma for ALMA — MA-specific tuning.
Offset for ALMA — center of mass for ALMA.
Delay Open/Close MA — shifts the source back by n bars for a more conservative (non-peek) calculation. Keep at 0 unless you know you want extra delay.
Show coloured Bars to indicate Trend?
Colors bars relative to HTF band.
What trades should be taken: LONG / SHORT / BOTH / NONE
Filters which sides are actually traded.
Invert Long/Short logic?
Swaps long ↔ short everywhere (orders, markers, JSON alerts).
Backtest window (Number of Bars for Back Testing)
Crude limiter to speed up testing. 0 = test full history.
TP/SL (Initial Stop Loss / Target Profit Points)
Values in ticks/points. 0 disables. They apply to both sides via strategy.exit().
Alert options
Turn on alerts (JSON)
Show alert marks (UP/DOWN/CLOSE)
Send CLOSE alerts (toggle)
The strategy fires alert() internally. Create an alert on “Any alert() function call”.
The payload is a simple JSON string:{ "text":"C98USDT.P UP"}
Messages:
UP — a long entry was executed (or, with Invert on: the inverted long signal that opens a long).
DOWN — a short entry executed.
CLOSE — position closed or flipped.
Tip: If you want to route long/short to different webhooks, parse the text field for UP, DOWN, or CLOSE
Plotting & markers
Band: Fills between the two HTF MA lines.
Bar color (optional): Quick visual trend cue.
Markers:
▲ “UP” below bar when a long executes.
▼ “DN” above bar when a short executes.
✖ “CL” on position close/flip.
These reflect the final executed side, after trade filters and after Invert mode
Best practices & notes
Non-repainting design.
request.security(..., lookahead_off) prevents future data leakage.
Signals are gated to HTF bar boundaries, so you won’t get intra-HTF recalculations.
Strategy orders are processed at bar close.
Choosing the multiplier.
A 2×–4× multiplier often balances responsiveness vs stability (e.g., 5m→15m or 20m). Larger multipliers reduce churn and false signals.
TP/SL units.
Values are in ticks/points of the chart symbol. On crypto, check your instrument’s tick size and adjust accordingly.
Trade filters apply after inversion.
With invertLS = true and tradeType = LONG, only final longs (post-inversion) are allowed.
Strategy vs chart counts.
The Tester reports closed trades; your chart shows entries/markers including the latest open trade. This can explain 8 vs 12 discrepancies over short windows.
Performance.
calc_on_every_tick=false and the backtest limiter keep the script responsive on long histories.
Tips: user on mid-volume crypto pair, 1M chart, best MA is: SMMA, Hull, SSMA, DEMA, TEMA.
This strategy is for research and education. Markets carry risk; past performance doesn’t guarantee future results. Always forward-test on paper and validate your exchange execution, tick size, and fees before deploying live.
Advanced Crypto Day Trading - Bybit Optimized mapercivEMA RSI ATR MACD trading script strategy with filters for weekdays
Higher Lows, Lower Highs & Failures with Signal Quality ScoringAn attempt at a higher low and lower high with scoring
Delayed X Exit Strategy - Final Versionattempt at a scored lowerhigh, higher lower delayed exit strat
MS - Crypto RSI-Based Trading StrategyThis is a comprehensive trend-following and momentum-based strategy designed for the cryptocurrency market. It combines multiple leading indicators to filter out market noise and generate high-quality buy and sell signals.
Key Indicators:
Moving Average (MA): To determine the main trend direction.
Relative Strength Index (RSI): To measure momentum and identify overbought/oversold conditions.
Directional Movement Index (DMI): To confirm the strength of the trend.
Volume & ATR: To validate market interest and filter out excessive volatility.
Buy Conditions (All Must Be True):
Price and Trend Alignment: The current price is above the MA50 (with a 5% buffer).
Momentum Confirmation: The RSI is between 50 and 70.
Trend Strength: The +DI is greater than the -DI.
Market Interest: Volume is 1.5 times its moving average.
Low Volatility: The ATR is below its average.
Sell Conditions (Any One Is True):
Trend Reversal: The price drops below the MA50 (with a 5% buffer).
Momentum Loss: The RSI drops below 45.
Trend Weakness: The -DI crosses above the +DI.
Market Fatigue: Volume drops below 50% of its moving average.
High Volatility: The ATR is above its average.
Disclaimer: This is a backtesting tool and not financial advice. Past performance is not an indicator of future results. Always use proper risk management and conduct your own research before trading.
Pivot Points Strategy🟢 It enters long trades near support zones (S1–S3)
🔴 It enters short trades near resistance zones (R1–R3)
🎯 All positions aim to exit at the central pivot (P).
🚫 It avoids trading when price crosses the pivot during the bar.
🔄 Strategy resets when a new pivot is calculated.
📊 Supports pyramiding up to 5 positions for scaling in.
MS - Çoklu Onay Stratejisi (AL-SAT)"VOLUME, MA50, RSI, DMI, ATR
5 conditions, all turning positive at the same time gives a buy signal; one of them turning negative gives a sell signal. This should be evaluated with weekly data. Not financial advice."
AMF PG Strategy_v2The AMF PG Strategy (Praetorian Guard) is an advanced trading system designed to seamlessly adapt to market conditions. Its unique structure balances precise entries with intelligent protection, giving traders confidence in both trending and volatility environments.
Key points include:
Adaptive Core (AMF Engine) – A dynamic framework that automatically adjusts for clearer long- and short-term opportunities and generates a robust tracking line.
Praetorian Guard – A built-in protective shield that activates in extreme conditions and helps stabilize performance when markets become turbulent.
Versatility – Effective across multiple timeframes, from scalping to swing trading, without constant parameter adjustments.
Clarity – Clear visual signals and color-coded monitoring for instant decision-making.
This strategy is designed for traders who want more than just entries and exits; it offers a command center for disciplined, adaptable, and resilient trading.
Disclaimer:
It should be noted that no strategy is guaranteed. This strategy does not provide buy-sell-hold advice. Responsibility rests with the user.
Version 2: Bugs overlooked in Version 1 have been corrected and improvements have been made.
AVWAP+RSI Confluence — 1R TesterRSI + 1R ATR - Monthly P\&L (v4)
WHAT THIS STRATEGY DOES (OVERVIEW)
* Pine strategy (v4) that combines a simple momentum trigger with a symmetric 1R ATR risk model and an on-chart Monthly/Yearly P\&L table.
* Momentum filter: trades only when RSI crosses its own SMA in the direction of the trend (price vs Trend EMA).
* Risk engine: exits use fixed 1R ATR brackets captured at entry (no drifting targets/stops).
* Accounting: the table aggregates percentage returns by month and year using strategy equity.
ENTRY LOGIC (LONGS & OPTIONAL SHORTS)
Indicators used:
* RSI(rsiLen) and its SMA: SMA(RSI, rsiMaLen)
* Trend filter: EMA(emaTrendLen) on price
Longs:
1. RSI crosses above its RSI SMA
2. RSI > rsiBuyThr (filters weak momentum)
3. Close > EMA(emaTrendLen)
Shorts (optional via enableShort):
1. RSI crosses below its RSI SMA
2. RSI < rsiSellThr
3. Close < EMA(emaTrendLen)
EXIT LOGIC AND RISK MODEL (1R ATR)
* On entry, snapshot ATR(atrLen) into atrAtEntry and the average fill price into entryPx.
* Longs: stop = entryPx - ATR \* atrMult; target = entryPx + ATR \* atrMult
* Shorts: mirrored.
* Stops and targets are posted immediately and remain fixed for the life of the trade.
POSITION SIZING AND COSTS
* Default position size: 25% of equity per trade (adjustable in Properties/inputs).
* Commission percent and a small slippage are set in strategy() so backtests include friction by default.
MONTHLY / YEARLY P\&L TABLE (HOW IT WORKS)
* Uses strategy equity to compute bar returns: equity / equity\ - 1.
* Compounds bar returns into current month and current year; commits each finished period at month/year change (or last bar).
* Renders rows as years; columns Jan..Dec plus a Year total column.
* Cells colored by sign; precision and maximum rows are controlled by inputs.
* Values represent percentage returns, not currency P\&L.
VISUAL AIDS
* Two pivot trails (pivot high/low) are plotted for context only; they do not affect entries or exits.
CUSTOMIZATION TIPS
* Raise rsiBuyThr (long) or lower rsiSellThr (short) to filter weak momentum.
* Increase emaTrendLen to tighten trend alignment.
* Adjust atrLen and atrMult to fit your timeframe/instrument volatility.
* Leave enableShort = false if you prefer long-only behavior or shorting is constrained.
NON-REPAINTING AND BACKTEST NOTES
* Signals use bar-close crosses of built-in indicators (RSI, EMA, ATR); no future bars are referenced.
* calc\_on\_every\_tick = true for responsive visuals; Strategy Tester evaluates on bar close in history.
* Backtest stop/limit fills are simulated and may differ from live execution/liquidity.
DISCLAIMERS
* Educational use only. This is not financial advice. Markets involve risk. Past performance does not guarantee future results.
INPUTS (QUICK REFERENCE)
* rsiLen, rsiMaLen, rsiBuyThr, rsiSellThr
* emaTrendLen
* atrLen, atrMult, enableShort
* leftBars, rightBars, prec, showTable, maxYearsRows
SHORT TAGLINE
RSI momentum with 1R ATR brackets and a built-in Monthly/Yearly P\&L table.
TAGS
strategy, RSI, ATR, trend, risk-management, backtest, Pine-v4
Turtle Trading System (Not Financial Advise)I am testing this script, not financial advise, but this is how it works, i hope;
How the Script Works
The script is a TradingView strategy that backtests and automates the Turtle rules. It uses two systems, a short-term S1 (20-day) and a long-term S2 (55-day), which you can select to test.
The strategy follows these core principles:
Trend Identification: The script uses Donchian Channels to identify breakouts. A new trend is signaled when the price breaks above the highest high or below the lowest low of a specified period.
Position Sizing: The script automatically calculates the size of each trade unit to ensure you risk a consistent percentage of your capital on every trade. This is based on the Average True Range (ATR), which measures volatility.
Pyramiding: When a trade moves in a profitable direction, the script will add more units at specific intervals to increase your position and ride the trend. This is how the Turtles made their big profits.
Win/Loss Condition:
A crucial rule is implemented for System 1 (S1): you only enter a trade if the previous S1 trade was a loss. If the last S1 trade was a win, you must wait for a signal from System 2 (S2).
How to Enter and Exit a Long Position
The script will automatically enter a long position when the price breaks above the highest high of the last 20 days (S1) or 55 days (S2), depending on which system you've selected.
Stop-Loss (SL): Your stop-loss is automatically placed at a distance of 2 * N (ATR) below the entry price. . This is a crucial risk management rule that limits your potential loss. The stop-loss is also plotted visually on the chart.
Exit Long: The script will close the long position automatically under two conditions:
Reversal: The price drops and closes below the lowest low of the last 10 days (S1) or 20 days (S2).
Stop-Loss Hit: The price hits your initial stop-loss, limiting your loss.
How to Enter and Exit a Short Position
Enter Short: The script will automatically enter a short position when the price breaks below the lowest low of the last 20 days (S1) or 55 days (S2).
Stop-Loss (SL): Your stop-loss is automatically placed at a distance of 2 * N (ATR) above the entry price. . This prevents large losses if the price moves against you.
Exit Short: The script will close the short position automatically under two conditions:
Reversal: The price rallies and closes above the highest high of the last 10 days (S1) or 20 days (S2).
Stop-Loss Hit: The price hits your initial stop-loss, limiting your loss.
AMF PG Strategy AMF Command Center Strategy (Praetorian Guard)
The AMF PG Strategy (Praetorian Guard) is an advanced trading system built to adapt seamlessly across market conditions. Its unique structure balances precision entries with intelligent protection, giving traders confidence in both trending and volatile environments.
Key highlights include:
Adaptive Core (AMF Engine) – A dynamic framework that automatically adjusts and generates a powerful tracking line for clearer long and short opportunities.
Praetorian Guard – A built-in protective shield that activates in extreme conditions, helping stabilize performance when markets become turbulent.
Versatility – Effective across multiple timeframes, from scalping to swing trading, without constant parameter adjustments.
Clarity – Clean visual signals and color-coded tracking for instant decision-making.
This strategy was designed for traders who want more than just entries and exits — it offers a command center for disciplined, adaptive, and resilient trading.
Day Range Breakout Strategy + Trend Structure Filter🚀 Enhanced Strategy for Breaking Previous Day’s Extremes with Market Structure-Based Trend
The strategy focuses on breakouts of previous day’s highs and lows, filtered by trend direction based on market structure.
🔑 Key Improvements
1️⃣ Solved the repainting issue.
There are similar strategies in the community, but the historical results of those algorithms do not correspond to the results of real backtesting.
2️⃣ Added a trend filter.
In most cases, this makes it possible to achieve higher profitability. It works as follows:
The script determines market structure based on a defined number of previous candles.
If there are higher highs and higher lows, this is considered an uptrend structure.
If there are lower highs and lower lows, this is considered a downtrend structure.
The trend filter is adjusted using the Lookback Period setting.
3️⃣ Choice of entry principle.
Implemented the ability to choose whether trades are opened based on closing prices or by high/low breakout, which allows finding the optimal settings for a specific instrument.
4️⃣ Improved entry/exit logic.
When an opposite signal appears, before entering a trade, the script first closes the previous position.
✅ This makes the strategy fully ready for algorithmic trading via webhook on any exchange that supports this function.
5️⃣ Better visualization.
🟥 Red and 🟩 green backgrounds indicate the trend direction.
⚙️ How It Works
The principle of the strategy as follows:
Wait for the breakout of the previous day’s high or low.
Enter long on a breakout of the high, or short on a breakout of the low in the market structure trend direction.
Exit occurs on the breakout of the opposite extreme.
📈 This allows capturing long trends.
⚠️ But, like all similar strategies, in a sideways market it produces losing trades.
⚙️ Default Settings
Breakout Confirmation:
The breakout is determined by the candle close.
You can also choose high/low, but this often gives more false signals. However, on some assets, it may show higher profitability in backtesting.
Trend Structure Period:
The default value is 15.
This means the script analyzes the last 15 candles on the selected timeframe to determine market structure as described above.
Position Size:
Fixed at $1,000, which is 1% of the initial capital of $100,000 to keep risks under control.
Commission:
Set to 0.1%, which is sufficient for most cryptocurrency exchanges.
Slippage:
Configured at 1 tick.
Funding Note:
Keep in mind that funding is not included in this strategy.
It’s impossible to predict whether it will be positive or negative, and it can vary significantly across exchanges, so it is not part of the default settings.
🕒 Recommended Settings
Timeframe: 1H and higher
On lower timeframes → significant discrepancies may occur between historical and real backtesting data.
On higher timeframes → minor differences are possible, related to slippage, sharp moves, and other unpredictable situations.
⚠️ Important Notes
Always remember: Strategy results may not repeat in the future.
The market constantly changes, so:
✅ Monitor the situation
✅ Backtest regularly
✅ Adjust settings for each asset
Also remember about possible bugs in any algorithmic trading strategy.
Even if a script is well-tested, no one knows what unpredictable events the market may bring tomorrow.
⚠️ Risk Management:
Do not risk more than 1% of your deposit per trade, otherwise you may lose your account balance, since this strategy works without stop losses.
⚠️ Disclaimer
The author of the strategy does not encourage anyone to use this algorithm and bears no responsibility for any possible financial losses resulting from its application!
Any decision to use this strategy is made personally by the owners of TradingView accounts and cryptocurrency exchange accounts.
📝 Final Notes
This is not the final version. I already have ideas on how to improve it further, so follow me to not miss updates.
🐞 Bug Reports
If you notice any bugs or inconsistencies in my algorithm,
please let me know — I will try to fix them as quickly as possible.
💬 Feedback & Suggestions
If you have any ideas on how this or any of my other strategies can be improved, feel free to write to me. I will try to implement your suggestions in the script.
Wishing everyone good luck and stable profits! 🚀💰
MuLegend's Break & Retest StrategyThis strategy was produced to help traders who trade NQ: win! try it out on a demo, see how you like and happy trading!! Works well if you are a break & retest trader!!!
MuMu
@atltime2shine on IG
ICT Unicorn Strategy [RoboQuant]What it detects
Structure: uses pivots (ta.pivothigh/low) to build a mini zigzag (A–B–C–D).
“Unicorn” Pattern:
Bull: bullish direction, C below A (protected swing), with a bullish “BRB” candle at B.
Bear: mirrored version.
FVG: searches for a valid gap between candle i and i+2 inside the BRB candle range and greater than 0.05 × ATR (quality filter).
When an FVG appears, it plots boxes/lines (top/bottom of range, protected swing, FVG box).
How it enters
Bull Trigger: a candle opens inside the FVG and closes above the top of the FVG (mitigation + continuation).
SL = protected swing (firstBl.swing, pivot C).
TP = top + (top - swing) * (reward/risk).
Draws Risk and Reward boxes if showTargets=true.
Bear Trigger: mirror setup (opens inside FVG and closes below bottom).
Management & sizing
Sizing: calculates position size = riskAmount / SL distance, capped by maxPositionSize.
RR configurable with risk and reward (default 1:2).
Trailing optional: adjusts TsL using short pivots (lenS).
Trade closes at SL (break of swing) or TP (target reached).
combine: if false, a bull setup cancels a bear setup (and vice versa). If true, both can coexist.
Key parameters
len: pivot sensitivity (structure).
riskAmount and maxPositionSize: risk control.
trail, lenS: trailing logic.
Box colors/visibility (showTargets, colRisk, colReward).
ICT translation
Seeks impulse → FVG → pullback into FVG → expansion, with a protected swing (implicit BOS/MSS via zigzag) and mitigation of imbalance.
The ATR * 0.05 filter avoids micro-gaps without intent.
How I’d use it (quick checklist)
Mark HTF bias (only take bull or bear setups with the trend).
On LTF, wait for a valid FVG inside the BRB candle.
Enter only if a candle re-enters the FVG and closes breaking its edge.
SL at swing C, TP by RR (default 1:2).
Enable trailing only after 1R is reached (optional, tuned via lenS).
Golden Cross + Support/Resistance + SL/TP + SignalsGolden Cross + Support/Resistance + SL/TP + Signals
Golden Cross + Support/Resistance + SL/TP + Signals
Liquidity Sweep Breakout - LSBLiquidity Sweep Breakout - LSB
A professional session-based breakout system designed for OANDA:USDJPY and other JPY pairs.
Not guesswork, but precision - built on detailed observation of institutional moves to capture clear trade direction daily.
Master the Market’s Daily Bank Flow.
---
Strategy Detail:
I discovered this strategy after carefully studying how Japanese banks influence the forex market during their daily settlement period. Banks are some of the biggest players in the financial world, and when they adjust or settle their accounts in the morning, it often creates a push in the market. From years of observation, I noticed a consistent pattern, once banks finish their settlements, the market usually continues moving in the same direction that was formed right after those actions. This daily banking flow often sets the tone for the entire trading session, especially for JPY pairs like USDJPY.
To capture this move, I built the indicator so that it follows the bank-driven trend with clear rules for entries, stop-loss (SL), and take-profit (TP). The system is designed with professional risk management in mind. By default, it assumes a $10,000 account size, risks only 1% of that balance per trade, and targets a 1:1.5 reward-to-risk ratio. This means for every $100 risked, the potential profit is $150. Such controlled risk makes the system safer and more sustainable for long-term traders. At the same time, users are not limited to this setup, they can adjust the account balance in the settings, and the indicator will automatically recalculate the lot size and risk levels based on their own capital. This ensures the strategy works for small accounts and larger accounts alike.
🌍 Why It Works
Fundamentally driven: Based on **daily Japanese banking settlement flows**.
Session-specific precision: Targets the exact window when USDJPY liquidity reshapes.
Risk-managed: Always calculates lot size based on account and risk preferences.
Automatable: With webhook + MT5 EA, it can be fully hands-free.
---
✅ Recommended
Pair: USDJPY (best observed behavior).
Timeframe: 3-Minute chart.
Platform: TradingView Premium (for webhooks).
Execution: MT5 via EA.
---
🔎 Strategy Concept
The Tokyo Magic Breakout (TMB) is built on years of session observation and the unique daily rhythm of the Japanese banking system.
Every morning between 5:50 AM – 6:10 AM PKT (09:50 – 10:10 JST), Japanese banks perform daily reconciliation and settlement. This often sets the tone for the USDJPY direction of the day.
This strategy isolates that critical moment of liquidity adjustment and waits for a clean breakout confirmation. Instead of chasing noise, it executes only when price action is aligned with the Tokyo market’s hidden flows.
---
🕒 Timing Logic
Session Start: 5:00 AM PKT (Tokyo market open range).
Magic Candle: The 5:54 AM PKT candle is marked as the reference “breakout selector.”
Checkpoints: First confirmation at 6:30 AM PKT, then every 15 minutes until 8:30 AM PKT.
* If price stays inside the magic range → wait.
* If a breakout happens but the candle wick touches the range → wait for the next checkpoint.
* If by 8:30 AM PKT no clean breakout occurs → the day is marked as No Trade Day (NTD).
👉 Recommended timeframe: 3-Minute chart (3M) for precise signals.
---
📈 Trade Execution
Entry: Clean break above/below the magic candle’s range.
Stop-Loss: Opposite side of the Tokyo session high/low.
Take-Profit: Calculated by Reward\:Risk ratio (default 1.5:1).
Lot Size: Auto-calculated based on your risk model:
* Fixed Dollar
* % of Equity
* Conservative (minimum of both).
Visuals include:
✅ Entry/SL/TP lines
✅ Shaded risk (red) and reward (green) zones
✅ Trade labels (Buy/Sell with lot size & levels)
✅ TP/SL hit markers
---
🔔 Alerts & Automation (AutoTMB)
This strategy is fully automation-ready with EA + MT5:
1. Enable alerts in TMB settings.
2. Insert your PineConnector License Key.
3. Configure your risk management preferences.
4. Create a TradingView alert → in the message box simply type:
Pine Script®
{{alert_message}}
and set the EA webhook.
Now, every breakout trade (with exact entry, SL, TP, and lot size) is sent instantly.
👉 On your MT5:
* Install the EA.
* Use the same license key.
* Run it on a VPS or local MT5 terminal.
You now have a hands-free trading system: AutoTMB.
HMK-2 | PCA-1 + Rejim + Chebyshev + VWAP (Input'lu, v6)📌 HMK-2 | PCA-1 + Regime + Chebyshev + VWAP Strategy
1️⃣ Core Structure
Instead of relying on a single indicator, this system uses the Z-Score normalized average of three oscillators (RSI, MFI, ROC).
Signal (PCA-1):
RSI(14), MFI(14), ROC(5) → each is converted into a z-score.
Their average becomes the “composite signal,” our PCA-1 value.
Trend direction: If the Z-score EMA is rising → trend UP. If falling → trend DOWN.
2️⃣ Side Filters
Regime Filter (ADX + EMA)
ADX is calculated manually.
If ADX > 20 → trend exists → a 50-period EMA of this value smooths it.
This turns “trend regime” into a probability between 0–1.
Chebyshev Filter
A return series is checked against mean ± k*sigma bands.
If the return is within this band → valid signal. Extreme moves are filtered out.
VWAP Filter
Long trades: price must be above VWAP.
Short trades: price must be below VWAP.
Trades are only taken on the correct side of institutional cost averages.
3️⃣ Entry Conditions
Long:
PCA-1 signal crosses above threshold.
Trend Up + Regime OK + Chebyshev OK + Above VWAP.
Short:
PCA-1 signal crosses below threshold.
Trend Down + Regime OK + Chebyshev OK + Below VWAP.
4️⃣ Exit Mechanism
Main Exit: ATR-based stop/target.
Stop = entry price – ATR × (SL factor).
Take profit = entry price + ATR × (TP factor).
Additional Exit:
If price crosses to the opposite side of VWAP.
If PCA-1 signal crosses zero.
👉 Prevents trades from being locked, makes exits adaptive.
5️⃣ Labels / Visualization
AL / SHORT → entry points.
SAT / COVER → exit points.
VWAP line plotted in blue.
🧩 Strategy Features
Optimizable parameters:
Z-window (zWin)
Threshold
Chebyshev factor
ATR stop/target multipliers
This system works with:
Disciplined core (PCA-1 signal)
Triple protection (Regime + Chebyshev + VWAP)
Adaptive exits (ATR + VWAP/signal cross)
👉 Not a “single-indicator robot,” but a multi-filtered trade direction engine.
💡 Final Note
This is a base model of the system — open for further development.
I’ve shared the logic to give you a roadmap.
If you spot errors, fix them → that’s how you’ll improve it.
Don’t waste time asking me questions — refine and build it better yourselves.
Wishing you profitable trades. Stay well 🙏
Script_Algo - High Low Range MA Crossover Strategy🎯 Core Concept
This strategy uses modified moving averages crossover, built on maximum and minimum prices, to determine entry and exit points in the market. A key advantage of this strategy is that it avoids most false signals in trendless conditions, which is characteristic of traditional moving average crossover strategies. This makes it possible to improve the risk/reward ratio and, consequently, the strategy's profitability.
📊 How the Strategy Works
Main Mechanism
The strategy builds 4 moving averages:
Two senior MAs (on high and low) with a longer period
Two junior MAs (on high and low) with a shorter period
Buy signal 🟢: when the junior MA of lows crosses above the senior MA of highs
Sell signal 🔴: when the junior MA of highs crosses below the senior MA of lows
As seen on the chart, it was potentially possible to make 9X on the WIFUSDT cryptocurrency pair in just a year and a half. However, be careful—such results may not necessarily be repeated in the future.
Special Feature
Position closing priority ❗: if an opposite signal arrives while a position is open, the strategy first closes the current position and only then opens a new one
⚙️ Indicator Settings
Available Moving Average Types
EMA - Exponential MA
SMA - Simple MA
SSMA - Smoothed MA
WMA - Weighted MA
VWMA - Volume Weighted MA
RMA - Adaptive MA
DEMA - Double EMA
TEMA - Triple EMA
Adjustable Parameters
Senior MA Length - period for long-term moving averages
Junior MA Length - period for short-term moving averages
✅ Advantages of the Strategy
🛡️ False Signal Protection - using two pairs of modified MAs reduces the number of false entries
🔄 Configuration Flexibility - ability to choose MA type and calculation periods
⚡ Automatic Switching - the strategy automatically closes the current position when receiving an opposite signal
📈 Visual Clarity - all MAs are displayed on the chart in different colors
⚠️ Disadvantages and Risks
📉 Signal Lag - like all MA-based strategies, it may provide delayed signals during sharp movements
🔁 Frequent Switching - in sideways markets, it may lead to multiple consecutive position openings/closings
📊 Requires Optimization - optimal parameters need to be selected for different instruments and timeframes
💡 Usage Recommendations
Backtest - test the strategy's performance on historical data
Optimize Parameters - select MA periods suitable for the specific trading instrument
Use Filters - add additional filters to confirm signals
Manage Risks - always use stop-loss and take-profit orders.
You can safely connect to the exchange via webhook and enjoy trading.
Good luck and profits to everyone!!
MTF RSI + ADX + ATR SL/TP vivekDescription:
This strategy combines the power of multi-timeframe RSI filtering with ADX trend confirmation and ATR-based risk management to capture strong directional moves.
🔑 Entry Rules:
• Daily RSI > 60
• 4H RSI > 60
• 1H RSI > 60
• 10m RSI > 40
• ADX (current timeframe) > 20
When all conditions align, a long entry is triggered.
🛡 Risk Management:
• ATR-based Stop-Loss (customizable multiplier)
• Take-Profit defined as a Risk-Reward multiple of the ATR stop
🎯 Why this Strategy?
• Ensures alignment across higher timeframes before entering a trade
• Uses ADX to avoid choppy/range-bound markets
• Built-in ATR stop-loss & take-profit for disciplined risk control
• Fully customizable parameters
This strategy is designed for trend-following swing entries. It works best on liquid instruments such as indices, forex pairs, and large-cap stocks. Always optimize the parameters based on your preferred asset and timeframe.
MTF RSI + ADX + ATR SL/TPThis strategy combines the power of multi-timeframe RSI filtering with ADX trend confirmation and ATR-based risk management to capture strong directional moves.
🔑 Entry Rules:
• Daily RSI > 60
• 4H RSI > 60
• 1H RSI > 60
• 10m RSI > 40
• ADX (current timeframe) > 20
When all conditions align, a long entry is triggered.
🛡 Risk Management:
• ATR-based Stop-Loss (customizable multiplier)
• Take-Profit defined as a Risk-Reward multiple of the ATR stop
🎯 Why this Strategy?
• Ensures alignment across higher timeframes before entering a trade
• Uses ADX to avoid choppy/range-bound markets
• Built-in ATR stop-loss & take-profit for disciplined risk control
• Fully customizable parameters
This strategy is designed for trend-following swing entries. It works best on liquid instruments such as indices, forex pairs, and large-cap stocks. Always optimize the parameters based on your preferred asset and timeframe.
Imbalance No SL📊 Strategy Name: Imbalance No SL
This strategy specially trades on price jumps (true imbalances) in the market, takes advantage of momentum only, and as soon as the opposite signal and profit is received, the trade is closed immediately.
Imbalance No SL strategy specially generates buy and sell signals based on "Imbalance" logic, without any fixed Stop Loss.
🔍 Core Logic
Imbalance Detection
Bullish Imbalance : When the low of the current candle is above the high of the previous candle.
(i.e. a jump type gap occurred in the market – demand is high, price went straight up)
Bearish Imbalance : When the high of the current candle is below the low of the previous candle.
(i.e. the market suddenly fell down)
Creating Visual Box and Label on Signal:
As soon as bullish imbalance is found, green box & IMB BULL label is displayed on the chart.
Bearish has red box & IMB BEAR label.
Trade Entry Logic
BUY on Bullish Imbalance: If there is already a buy or neutral position, then a new “BUY” signal will fire.
SELL on Bearish Imbalance: If already in sell or neutral position, then new “SELL” signal will fire.
You can set quantity/lot size from ‘qty’ input field.
Trade Average Calculation
Buy/Sell maintains average price and their count (so that if averaging is done then correct P&L is calculated).
Trade Exit Logic (Profit Booking/Signal Reverse)
If your buy is going on and bearish imbalance is formed + price is above your average, then buy will be closed (profit condition).
If sell is going on and bullish imbalance is formed + price is below average, then sell will be closed.
Chart Cleaning/Management
Only keep the label and box of the latest signal on the chart, old boxes/labels are automatically deleted.
Alert
You can get alert on bullish or bearish signal (by using alert feature of TradingView).
✅ Simple Explanation for User
This strategy buys or sells directly at the gap (imbalance).
Whenever there is a clear signal of momentum in the market (breakout of the gap), then the trade entry takes place.
When there is an imbalance in the opposite direction and profit is made, the system closes the trade (closes).
There is no fixed stop-loss, risk management is handled by trade averaging/close.
You will know at every point on the visually chart that at which bar the buy, sell and exit took place.
⚠️ What to remember?
If the market is in trend then this script gives very good signals.
In choppy/sideways market, some loss trades can also come because there is no SL.
Big profit or big loss – both depend on the imbalance signal and market speed.
