지금 시작

Educational

MB Break & Retest MB Break & Retest + VWAP (ORB) is an Opening Range Breakout indicator built for intraday trading. It captures the first 15 minutes of the session to plot the Opening Range High, Low, and Midpoint. After the Opening Range is set, it looks for a confirmed breakout using two conditions: price must close a user-defined distance beyond the OR High or OR Low, and the breakout candle must meet a minimum 5-minute volume threshold. If both the OR High and OR Low break in the same session, the indicator flags the market as choppy and avoids taking trades. Trades are not taken on the breakout candle. Instead, the script waits for price to retest the Opening Range midpoint and enter only when that retest shows acceptable confirmation. Optional filters include a close-position filter (requiring the candle to close in the top/bottom portion of its range), a minimum retest volume requirement, and a midpoint “respect” filter that requires price to reject away from the midpoint by a set distance rather than simply touching it. An optional VWAP filter adds directional bias: longs are allowed only when the midpoint is sufficiently below VWAP (with a configurable buffer), and shorts are allowed only when the midpoint is sufficiently above VWAP. The VWAP line can be displayed, and the script tracks how many potential trades were filtered out by the VWAP rule. The indicator also includes built-in trade management and visual risk tools. It plots stop-loss and take-profit zones, supports a partial profit target (taking 50% off at a specified move), and can move the stop to break-even once a configurable R:R threshold is reached. Entry, partial, break-even, stop, and target events can be labeled on the chart. A live status panel shows the current state (watching, breakout detected, trade active, session closed, or choppy), along with OR levels, midpoint, VWAP context, and volume information. A backtest dashboard summarizes performance metrics such as net P/L, win rate, profit factor, average win/loss, long vs short stats, breakeven exits, partial exits, streaks, and VWAP-filtered counts.
Pine Script® 인디케이터
baberzayn의
ShefaBot V236 ShefaBot - Session Trend System Description: This is a custom-built trading system designed for intraday analysis on GBP/USD. Unlike standard indicators, this script incorporates specific logic to filter out market noise based on trading sessions and volatility ranges. It provides clear visual cues for trend direction while minimizing false signals during low-volume periods. Key Features: Custom trend calculation algorithm. Session-based volatility filtering. Clean visual interface for rapid decision-making. Note: This script implements a specific proprietary strategy and is intended for private community use.
Pine Script™ 전략
aviadss22의
logger.DEMO◼ Objective This is an accompanying script to logger library. As the library has lot of logging features, this script demonstrates how all fields and methods interact to display logs on screen. Please always use the latest version of the library and the key information functions ◼ How to access help and info about this library Import the latest version of Library, call logger.overview(), and hover mouse over overview() to see help in Editor! import GETpacman/logger/4 as logger logger.overview() => Help and general information logger.sampleCode() => Sample Code Usage logger.fields() => For listing all fields logger.methods() => For listing of all methods
Pine Script® 인디케이터
GETpacman의
BTC Spot Premium Index (Coinbase - Binance )Overview This indicator measures the price difference between Bitcoin (BTC) on Coinbase and Binance, providing insights into the buying pressure from US-based investors versus the global market. A positive premium suggests stronger buying activity on Coinbase, which is often interpreted as a bullish signal for BTC. Key Features • Premium Calculation: The core of the indicator is the formula: Coinbase BTC Price - Binance BTC Price. • Visual Representation: The premium is plotted as an oscillator with a zero line. Positive values are colored green, and negative values are red, making it easy to identify the prevailing market sentiment. • Moving Average: A customizable moving average (default is a 20-period SMA) is included to help identify the trend of the premium. The MA line is displayed in white. • Adjustable Parameters: You can adjust the moving average length and type (SMA, EMA, WMA, RMA) to fit your trading style. How to Use 1. Identify US Market Sentiment: A sustained positive (green) premium suggests strong buying interest from the US market, which can be a precursor to price appreciation. 2. Spot Trend Reversals: A crossover of the premium line above the zero line can signal a shift from bearish to bullish sentiment. Conversely, a cross below the zero line may indicate weakening US demand. 3. Confirm with Moving Average: When the premium line crosses above its moving average, it can signal strengthening momentum. A cross below the MA may suggest a potential slowdown. Interpretation • Green Area (Positive Premium): Indicates that BTC is trading at a higher price on Coinbase than on Binance. This is generally considered a bullish sign, as it reflects strong demand from US investors. • Red Area (Negative Premium): Indicates that BTC is trading at a lower price on Coinbase. This may suggest weaker demand in the US market or stronger selling pressure. • White Line (Moving Average): Helps to smooth out the premium data and identify the underlying trend. Use it as a dynamic support or resistance level for the premium itself. This indicator is a powerful tool for gauging market sentiment and can be a valuable addition to any BTC trader's toolkit. However, it should be used in conjunction with other technical analysis tools and not as a standalone signal for making trading decisions.
Pine Script® 인디케이터
dylancui9의
Multi-Symbol RSI Portfolio Simulator [Honestcowboy]The Multi-Symbol RSI Portfolio Simulator was build to test a theory, does the RSI indicator work in FOREX assets. Does it have predictive power. In this example the security function is used to fetch data for 40 different Forex pairs and it executes a very simple trading strategy. Sell when RSI hits 80, flatten if back below. Buy when RSI hits 20, flatten if back above. All executed on bar closes so no intra bar stuff. 🟦 🟦 🟦 Very Important Disclaimer This is a very crude indicator which does not calculate trading costs and assumes perfect execution of trades with zero slippage. Forex markets carry high risk and most CFD brokers ask high spreads and trading costs so this approach will most likely only work on the H4 or above Daily charts. We are observing market behaviour here, it's a study of price action not an executable ready strategy. Do your own cost analysis, simulation if you want to take this idea further. 🟦 What is the point? I build this indicator to prove that RSI indeed causes price action reactions especially on the intraday level in forex. Just like any study or paper not accounting for trading costs, this is just hypothetical and a starting point. 🟦 CALCULATION On each bar close it will check RSI value for each pair in the list. If one of the pairs meets the condition for a long or short it will open that trade on next bar open and hold it till close. Add the profits/losses to the equity line. And if condition still true on next bar do it again, this is a very crude simple form of testing. Tradingview strategy tester is superior but does not allow for multi-pair trading. Short Condition: RSI above 80 Short Exit: RSI below 70 Long Condition: RSI below 20 Long Exit: RSI above 30 The indicator also has 2 modes: Mean reversion and Trend mode. On default it uses Mean Reversion which is explained above. Trend mode does the exact opposite, so long above 80 short below 20. I've also included a table with a heatmap showing all the trading pairs the indicator uses, it's current RSI value and color based on how close indicator is to shorting or longing it from green to red with gray being middle so no direction. 🟦 USE CASES You can tweak the setting for different RSI values. Different RSI lengths and also freely change any trading pair inside the list to make your own test. I'm including some screenshots of tests here below:
Pine Script® 인디케이터
Honestcowboy의
M1 propath📊 M1 PROPATH – Smart Trend & Level Indicator M1 PROPATH is a powerful all-in-one trading indicator designed for trend identification, momentum confirmation, and precise entry zones. It combines four proven tools into a single, easy-to-use system. 🔹 Included Components 🔁 Supertrend Identifies overall market trend (Bullish / Bearish) Helps traders stay on the right side of the market Useful for trend-following and trailing stop logic 📈 Bollinger Bands (BB) Measures volatility and price expansion Highlights overbought and oversold zones Helps in spotting pullbacks and breakout setups 📉 EMA Pack (Exponential Moving Averages) Shows dynamic support and resistance Confirms trend strength and momentum Useful for scalping, intraday, and swing trading 🧭 Gann Levels (Square of 9 Based) Displays important price levels derived from Gann theory Helps identify high-probability reversal and reaction zones Works perfectly with BB and Supertrend for confluence-based entries
Pine Script® 인디케이터
Propath_Traders의
VIP ALERTS - Volume Profiles SuiteThe Volume Profile + Supply/Demand Zone + MA Suite + Fibonacci + Buy/Sell Alert indicator (often seen in advanced TradingView setups or custom "all-in-one" professional suites) is a powerful confluence-based trading tool designed for price action, institutional/Smart Money, and confluence traders. It brings together five of the most respected technical analysis concepts into one unified dashboard, helping traders identify high-probability zones and receive objective entry/exit signals. Core Components of the Indicator Volume Profile (The Foundation of Value & Liquidity) Displays horizontal histogram showing volume traded at each price level Highlights critical levels: POC (Point of Control) → price with maximum traded volume VAH / VAL (Value Area High/Low) → ~70% of volume zone HVN (High Volume Nodes) → strong acceptance/support/resistance LVN (Low Volume Nodes) → potential breakout/acceleration zones Acts as the "truth layer" — price tends to respect or react strongly when it meets significant volume history. Supply & Demand Zones (Institutional Order Blocks / Liquidity Pools) Automatically detects and draws fresh/untested zones where aggressive buying (Demand) or selling (Supply) previously occurred Usually color-coded: Green/Blue zones → Demand (potential buying interest) Red/Purple zones → Supply (potential selling pressure) Many versions include mitigation/partial fill logic + aging (fading strength of old zones) MA Suite (Multi-Timeframe Moving Averages) Collection of dynamic trend filters & dynamic S/R: Common combinations: 9/21/50/200 EMA • 20/50/100/200 SMA • VWAP Often includes EMA clouds, ribbon, or trend coloring Purpose: determine overall bias (bullish above key MAs / bearish below) + dynamic pullback zones Fibonacci Tools (Golden Ratio Mathematics) Auto or anchored retracement + extension levels Most watched zones: 0.618 – 0.65 ("Golden Pocket") → highest probability reversal area 0.786 → deep pullback / last chance area 1.272 / 1.618 / 2.618 → common extension targets Frequently overlaps with Volume Profile nodes and Supply/Demand zones → very strong confluence Buy/Sell Alert System (Signal Engine) Generates visual + sound + popup + email/webhook alerts when multiple conditions align Typical trigger logic examples: Price enters strong Demand zone + touches 0.618–0.786 Fib + above key EMA + bounces off HVN Break & retest of POC/VAH with momentum candle Rejection at Supply zone near 1.618 extension Many versions allow customizable confluence requirements (e.g. need 3/5 conditions met)
Pine Script® 인디케이터
epham55016의
1
The Order Flow Key LevelsThe Order Flow Key Levels — Liquidity-Based Support & Resistance The Order Flow Key Levels is a closed-source indicator that plots participation-based key levels directly on the chart as clean, horizontal lines. The goal is to help traders quickly identify key levels formed by high participation, using the interaction between price movement and executed volume. What you see on the chart The indicator draws horizontal key level lines at prices where meaningful trading activity has occurred and where price has historically shown a reaction. These lines are intended to be used as context—areas where price may pause, reject, or accept and continue. How it works (high level) At a conceptual level, the tool evaluates: Executed volume concentration at specific price levels Repeated interaction at those levels over time (participation “revisits”) Price response to participation, distinguishing between acceptance vs rejection behavior Key levels are formed from completed execution data and are designed to be non-repainting, meaning once a level is confirmed and plotted, it remains stable rather than shifting retroactively. The indicator does not predict future price direction; it provides structure and confirmation based on participation. How traders use it Treat the plotted lines as high liquidity zones Look for acceptance above/below a level as directional confirmation Use levels for entries, exits, and trade management, including defining invalidation areas beyond a level Monitor market structure as price transitions between levels (break, hold, retest, rejection) The Order Flow Key Levels is built for futures, crypto, CFDs, and other high-liquidity markets, where executed volume-based participation can provide meaningful context. While the indicator uses established price and volume concepts, it applies a proprietary methodology for identifying and filtering participation-based key levels, helping reduce noise compared to traditional support/resistance tools.
Pine Script® 인디케이터
MasterOrderFlow의