지금 시작

Candlestick analysis

5-Min ORB - NY Session5-Minute Opening Range Breakout (ORB) - NY Session Indicator This TradingView indicator identifies and plots the Opening Range Breakout (ORB) based on the first 5-minute candle of the New York trading session. Key Features: Automatic Detection: Automatically detects the NY session open (default 9:30 AM ET, fully customizable) and captures the high/low of the first 5-minute bar Multi-Timeframe Support: Works on any chart timeframe (1-min, 3-min, 15-min, etc.) by requesting 5-minute data Dynamic Price Targets: Calculates both bullish (above ORB high) and bearish (below ORB low) price targets based on the opening range size Configurable Targets: Set up to 10 price target levels on each side, with targets spaced proportionally to the ORB range Extended Lines: All lines automatically extend ahead of the current bar by a configurable number of minutes for better forward visibility Price Labels: Optional price labels display exact values at the end of each level Midpoint Line: Optional dashed midpoint line shows the center of the opening range Custom Styling: Fully customizable colors and transparency for all lines and labels How It Works: The indicator measures the distance between the ORB high and midpoint, then projects additional targets at equal intervals above the high (bullish targets in green) and below the low (bearish targets in red). Why Use a 5-Minute ORB? Tighter Range: The 5-minute opening range is typically smaller than the 15-minute range, providing more precise entry and exit levels Earlier Signals: Breakouts are identified sooner, allowing for faster reaction times Scalping-Friendly: Ideal for day traders and scalpers who prefer shorter timeframes and quicker price movements Higher Probability Zones: The narrower range often creates more reliable support/resistance levels for intraday trading Best Practices: Works best on liquid instruments with high volume during NY session open Combine with volume analysis to confirm breakout validity Consider using the first target as a take-profit level for quick scalps Watch for false breakouts within the first 15-30 minutes of the session
Pine Script® 인디케이터
elitesingh의
1
Trend SignalSystem Trend Signal — What It Does Shows you when your trading system says "be long" vs "stay out" — with a trailing line and buy/sell labels only when the state flips. The Rules Built In: BUY state requires ALL of these: Price above 50-DMA (intermediate trend up) 10-DMA above 20-DMA (short-term trend confirmed) Sell/Buy Pressure Ratio below 1.5 AND flattening or falling (sellers not aggressive) RSI above 30 and not making lower lows (momentum OK) SELL state triggers on ANY of these : Price drops below 50-DMA (trend broken) Pressure Ratio spikes above 2.0 (heavy selling) RSI making lower lows AND below 40 (momentum failing) What You See: "Buy" label appears only when state flips from sell → buy "Sell" label appears only when state flips from buy → sell No spam. One label per flip. The Trailing Line: Uses ATR to set distance from price. In buy state: line = close - (ATR × 2.0), ratchets up only In sell state: line = close + (ATR × 2.0), ratchets down only
Pine Script® 인디케이터
justin_orr의
ICT MTF FVG BPR Toolkit [D4A}The ICT MTF FVG BPR Toolkit encompasses the following 5 components: - Fair Value Gaps - current timeframe - Fair Value Gaps - higher timeframe - BPR - Balanced Price Range - Long Wicks - which are considered to be gaps by ICT - Immediate Rebalance - it leaves no gaps, but is as important in assessing current workflow This is advanced Fair Value Gaps script that uses trading methodology taught by ICT trader. To use it effectively it requires at least some basic knowledge of Smart Money Concepts (SMC) as outlined in ICT's lectures found on YT. I may publish another SMC related scripts in future if this kind of tool is useful to anybody. The idea behind this work, is to have all the necessary tools related to Fair Value Gaps in one script that is easy to use (requires SMC knowledge), fully customizable and will keep the chart as clutter free as possible. Since, I could not find a ready-made script which would tick all my requirements, I created this new script, partially by borrowing some ideas and code from existing open source projects that I liked. Rather than re-inventing the wheel, I focused on adopting and improving existing solutions and have them work together in one tool that could present the information accurately and in a polished way, where the trader can customize almost everything. Full credit goes to other coders, who tackled this subject before me, but particularly to: QuantVue LuxAlgo pmk07 The script have these unique features: - Can present FVGs from up to 3 different timeframes at any given interval - The amount and interval of higher timeframe FVGs is fully customizable - FVGs can be displayed based on size - Volume Imbalance can be included as part of FVG (as recommended by ICT) - Higher timeframe FVGs can have quadrants displayed along with C.E. (based on ATR filter) - Both current and higher timeframe FVGs can be displayed in different ways depending on price interactions - BPR which works on current timeframe only - Long Wick detection logic has been slightly changed from the original LuxAlgo code - Immediate Rebalance code has been simplified and re-focused on clarity ----------------- Disclaimer The information contained in my Scripts/Indicators/Ideas/Algos/Systems does not constitute financial advice or a solicitation to buy or sell any securities of any type. I will not accept liability for any loss or damage, including without limitation any loss of profit, which may arise directly or indirectly from the use of or reliance on such information. All investments involve risk, and the past performance of a security, industry, sector, market, financial product, trading strategy, backtest, or individual's trading does not guarantee future results or returns. Investors are fully responsible for any investment decisions they make. Such decisions should be based solely on an evaluation of their financial circumstances, investment objectives, risk tolerance, and liquidity needs. My Scripts/Indicators/Ideas/Algos/Systems are only for educational purposes!
Pine Script® 인디케이터
dub4art의
EMA/SMA Full color signal candles💡 What It Does: The indicator calculates and plots the 21-period Exponential Moving Average (EMA) and the 30-period Simple Moving Average (SMA). It then analyzes the closing price of each candle and colors the entire candlestick (body and border) according to pre-defined trend conditions. This visualization allows traders to identify strong trend environments versus periods of consolidation or indecision at a glance, removing the need to constantly check the price relationship manually. 🎨 Color Conditions and Meaning: The indicator uses three distinct color states to signal the market's current momentum: Color,Condition,Market Interpretation 🟢 GREEN,Closing Price is ABOVE both the 21 EMA AND the 30 SMA.,Strong Bullish Trend: Suggests high momentum and confirmation of an uptrend. Ideal for long bias. 🔴 RED,Closing Price is BELOW both the 21 EMA AND the 30 SMA.,Strong Bearish Trend: Suggests high downward pressure and confirmation of a downtrend. Ideal for short bias. ⚫ GRAY,"Closing Price is in any other state (e.g., between the two MAs, or under one and over the other).","Neutral / Consolidation: Indicates uncertainty, low momentum, or potential trend exhaustion/reversal. Caution is advised." 🔧 Customization Options:The indicator is fully customizable, allowing users to fine-tune the periods to match their preferred trading style (e.g., scalping, swing trading).Dĺžka EMA (Length EMA): Allows you to change the period for the Exponential Moving Average (default is 21).Dĺžka SMA (Length SMA): Allows you to change the period for the Simple Moving Average (default is 30). I added also Extra 4 EMA lines to have extra edge.
Pine Script® 인디케이터
cryptoinvestsvk의
Consolidation Zones Volume Delta | Flux ChartsGENERAL OVERVIEW: The Consolidation Zones Volume Delta | Flux Charts indicator is designed to identify and visualize consolidation zones on the chart. Rather than only outlining areas of sideways price movement, the indicator analyzes volume activity occurring inside each consolidation zone. This is done by aggregating lower-timeframe volume data into the higher-timeframe consolidation range, allowing users to see how buying and selling activity evolves while price remains in a range. What is the theory behind the indicator?: The indicator is built around three core analytical concepts that guide how consolidation zones are detected and evaluated. 1. Consolidation as a structural phase Periods of consolidation are characterized by reduced directional movement and compressed price ranges. During these phases, price action often alternates within a defined high–low boundary, creating a structure that can be objectively measured and tracked over time. 2. Volume behavior inside consolidation While price may appear balanced within a consolidation range, volume activity inside that range can vary. The indicator evaluates volume contributions occurring within the vertical boundaries of the consolidation zone by using lower-timeframe data and weighting each candle’s volume based on its overlap with the zone. This produces an internal volume delta profile that reflects how buying and selling volume accumulates throughout the consolidation. Delta behavior inside a zone may show: Persistent dominance of buying or selling volume Alternating shifts between buyers and sellers Periods of relatively balanced participation 3. Markets consolidate in multiple ways, one detection method is not enough Markets do not consolidate in a single, uniform way. To account for this, the indicator includes three distinct consolidation detection methods. Each method is calculated objectively, does not repaint, and targets a different type of sideways or low-expansion price behavior: Candle Compression ADX Low Trend Strength Visual Range Boundaries CONSOLIDATION ZONES VOLUME DELTA FEATURES: The Consolidation Zones Volume Delta indicator includes 4 main features: Consolidation Zones Volume Delta Standard Deviation Bands Alerts CONSOLIDATION ZONES: 🔹What is a Consolidation Zone? A consolidation zone is a defined price range where market movement becomes compressed and price remains contained within clear upper and lower boundaries for a sustained period of time. During this phase, price does not establish a strong directional trend and instead oscillates within a relatively narrow range. 🔹Consolidation Zone Detection The indicator automatically detects consolidation zones using three independent, rule-based methods. Each method evaluates a different market condition and can be selected individually depending on how you want consolidation to be defined. Regardless of the method used, all zones are calculated objectively and finalized once confirmed. ◇ Candles (Candle Compression) The Candles method identifies consolidation by detecting periods of candle compression and reduced range expansion. A candle is considered part of a consolidation sequence when: The candle body is small relative to its total range The candle’s high–low range is smaller than the short-term Average True Range (ATR) ATR is calculated using a 4-period average true range and is used as a volatility reference. If consecutive candles continue to meet these compression conditions, the indicator increments an internal count. Under the Consolidation Candles section in the settings, you’ll find two controls. Min. Consolidation Candles setting This defines how many consecutive compressed candles are required before a consolidation zone is confirmed. Candle compression is determined using candle structure and short-term ATR, ensuring that only periods of reduced range expansion are counted. Once the minimum threshold is reached, the indicator creates a consolidation zone using the highest high and lowest low formed during the compressed sequence. Mark Consolidation Candles When enabled, the indicator highlights candles that meet the compression criteria, making it easy to visually identify which candles contributed to the formation of the consolidation zone. ◇ ADX (Low Trend Strength) The ADX method identifies consolidation based on weak or declining trend strength rather than candle structure. This method uses the Average Directional Index (ADX) to determine when directional movement is reduced. ADX is calculated using directional movement values that are smoothed over time. When ADX remains below a user-defined threshold, price is treated as being in a low-trend market. While this condition persists, the indicator tracks the highest high and lowest low formed during the low-trend period. Under the ADX Settings section in the settings, you’ll find the following controls. ADX Length Defines the lookback period used to calculate directional movement for ADX. ADX Smoothing Controls the smoothing applied to the ADX calculation. ADX Threshold Sets the level below which ADX must remain for the market to be considered consolidating. Consolidation Strength Defines how many consecutive candles’ ADX must stay below the threshold before a consolidation zone is confirmed. Once this requirement is met, the indicator creates a consolidation zone using the accumulated high and low from the low-trend window. Mark Candles Below Threshold When enabled, the indicator highlights candles where ADX remains below the threshold. ◇ Visual Range The Visual Range method identifies consolidation by detecting clearly defined horizontal price ranges where price remains contained for a sustained period of time. The indicator continuously tracks the rolling highest high and lowest low across recent candles. When price remains inside the same high–low boundaries without breaking above or below the range, an internal counter advances. Under the Visual Range section in the settings, you’ll find the following control. Min. Candles in Range Defines how many consecutive candles must remain fully contained within the same high–low range before a consolidation zone is confirmed. Once this requirement is met, the indicator creates a consolidation zone using the established range boundaries. 🔹Consolidation Zone Settings ◇ Invalidation Method Users can choose how Consolidation Zones are invalidated, selecting between Close Break or Wick Break. Close Break: A Consolidation Zone is invalidated when a candle closes above/below the zone. Wick Break: A Consolidation Zone is invalidated when a candle’s wick goes above/below the zone. ◇ Merge Overlapping Zones When enabled, overlapping Consolidation Zones are automatically combined into one unified zone. ◇ Show Last This setting determines how many Consolidation Zones are displayed on your chart. For example, setting this to 5 will display the 5 most recent zones. VOLUME DELTA: Delta Volume visualizes how buying and selling volume accumulates inside each consolidation zone. Instead of using the full candle volume, the indicator isolates only the volume that occurs within the vertical boundaries of the zone. This allows you to see whether bullish or bearish volume is dominating while price remains range-bound. The visualization updates in real time while the zone is active and reflects cumulative participation rather than individual candles. 🔹How Volume Delta is Calculated Delta Volume is calculated using lower-timeframe data and applied to the higher-timeframe consolidation zone. Each candle’s volume is split into bullish or bearish volume based on candle direction. Lower-timeframe candles are pulled using the selected delta timeframe. For each lower-timeframe candle, only the portion of volume that vertically overlaps the consolidation zone is counted. Volume is weighted by the amount of overlap between the candle’s range and the zone’s range. Bullish and bearish volume are accumulated over time to form a running, cumulative delta profile for the zone. 🔹Volume Delta Settings ◇ Enable Turns the Delta Volume visualization on or off. Consolidation zones continue to plot when disabled. ◇ Show Delta % Displays the percentage breakdown of bullish versus bearish volume inside the consolidation zone. Percentages are derived from cumulative volume totals. ◇ 3D Visual When enabled, the delta blocks are extended diagonally using a depth offset derived from the instrument’s daily ATR. This creates visible side faces and top faces for the delta blocks, simulating depth without altering any calculations. The 3D effect is purely visual. It does not change how volume is calculated, weighted, or accumulated. Users can control the intensity of the 3D effect choosing a value between 1 and 5. Increasing this value increases: The horizontal offset of the delta blocks The vertical depth projection applied to the volume faces Higher values produce a more pronounced 3D appearance by pushing the delta visualization further away from the consolidation box. Lower values keep the visualization flatter and closer to the box boundaries. The depth scaling is normalized using ATR, so the effect adapts proportionally to the instrument’s volatility. ◇ Volume Delta Display Style Controls how bullish and bearish volume are displayed inside the Consolidation Zone: Horizontal: Volume is split top-to-bottom within the zone Vertical: Volume is split left-to-right across the zone ◇ Timeframe Defines the lower timeframe used for Volume Delta calculations. When a timeframe is selected, the indicator pulls lower-timeframe price and volume data and maps it into the higher-timeframe consolidation zone. Each lower-timeframe candle is evaluated individually. Only the portion of its volume that vertically overlaps the consolidation zone is included, and that volume is weighted based on the candle’s overlap with the zone’s price range. If the Timeframe field is left empty, the indicator defaults to using the chart’s current timeframe for delta calculations. Using a lower timeframe increases the granularity of the delta calculation, allowing volume changes inside the zone to be measured more precisely. Using a higher timeframe produces a smoother, less granular delta profile. Please Note: Delta rendering is automatically limited to available lower-timeframe data to prevent incomplete or distorted visuals when historical lower-timeframe volume is unavailable due to TradingView data limits. STANDARD DEVIATION BANDS: Standard Deviation Bands project measured price distance away from a confirmed consolidation zone using the size of that zone as the reference unit. Rather than calculating volatility from historical price dispersion, the bands are derived directly from the height of the consolidation range itself. Each band represents a fixed multiple of the consolidation zone’s height and is plotted symmetrically above and below the zone. 🔹How the bands are calculated Once a consolidation zone is finalized, the indicator calculates the zone height as: Zone Height = Zone High − Zone Low This value becomes the base measurement for all deviation calculations. For each enabled band: Upper bands are placed above the consolidation zone’s high Lower bands are placed below the consolidation zone’s low The distance of each band from the zone is calculated by multiplying the zone height by the selected band multiplier. These band levels are fixed relative to the consolidation zone and do not recalculate based on future price movement. 🔹Standard Deviation Band Settings ◇ Band 1 Enables the first deviation band above and below the consolidation zone. The Band 1 multiplier defines how far the band is placed from the zone in terms of zone height. For example, a multiplier of 1 plots the band one full zone height above and below the consolidation range. ◇ Band 2 Enables a second deviation band at a greater distance from the consolidation zone. Band 2 uses its own multiplier and is calculated independently of Band 1, allowing multiple expansion levels to be displayed simultaneously. ◇ Fill Bands When enabled, the area between the consolidation zone and each deviation band is filled with a semi-transparent color. Upper fills apply to bands above the zone, and lower fills apply to bands below the zone. Fills are static and tied directly to the consolidation zone boundaries. ◇ Color Customization Each deviation band has independent color controls for: Upper band lines and fills Lower band lines and fills This allows users to visually distinguish between bullish and bearish extensions as well as between multiple deviation levels. ALERTS: Users can create alerts for the following: New Consolidation Zone Formed Consolidation Zone Break UNIQUENESS: This indicator combines multiple consolidation detection methods with lower-timeframe volume delta analysis inside each consolidation zone. It visualizes bullish and bearish volume using weighted overlap logic and optional 3D rendering for improved clarity. Users can choose how volume is displayed, apply structure-based deviation bands, and enable alerts for new zones and zone breaks. All features are rule-based, configurable, and designed to work together within a single framework.
Pine Script® 인디케이터
fluxchart의
10
Advanced Demand ZoneThis indicator automatically identifies strong demand zones based on swing lows followed by significant bullish reactions. It is designed for 4H timeframe and crypto trading (BTC, ETH, altcoins). Key Features: Automatically draws clear demand zones for better visual analysis. Filters out weak impulses to reduce false zones. Sends alerts when price enters a demand zone. Transparent zones that do not clutter your chart. Fully customizable parameters: swing lookback, impulse threshold, and zone transparency. This tool helps traders quickly spot high-probability buy areas while allowing manual confirmation with price action, making it perfect for swing and intraday trading.
Pine Script® 인디케이터
UROSCRYPTOSERB의
Key Levels: Volume Profile POCProfessional Intraday Key Levels (CST) This is a comprehensive, institutional-grade Pine Script indicator designed for intraday traders (Futures, Stocks, Options) operating in the Central Time Zone. It automatically plots the most significant support and resistance levels used by algorithms and professional desks. 1. Core Levels Monitored Daily Levels: Previous Day High (PDH), Low (PDL), Open, Close, and the 50% Midpoint (Equilibrium). Volume Profile POC: Unlike standard indicators that use a simple average, this calculates the Volume Weighted Average Price (VWAP) of the previous day to determine the true "Fair Value" or Point of Control. Plotted with a thicker, distinct purple line. Weekly Magnets: Previous Week High (PWH) and Low (PWL), which often act as major targets for breakouts or reversals. Pre-Market Data: Tracks the High and Low established between 03:00 AM – 08:30 AM CST. Opening Range (OR): Automatically captures the High and Low of the first 60 minutes of the regular session (08:30 AM – 09:30 AM CST). 2. Smart Visualization Features Anti-Overlap Labels: If two levels (e.g., Pre-Market High and Previous Day High) are within 0.02% of each other, the script automatically merges them into a single label (e.g., "PDH & Pre-Market High") to prevent chart clutter. Source Tracing: Trace lines extend backward from the current price level to the exact candle where that High or Low was formed (for Pre-Market and Opening Range levels), giving you instant context on when the level was created. Clean Readability: Labels are displayed in bold, solid text without price numbers, ensuring a clean chart that focuses on level identification rather than data overload. 3. Technical Precision Time Zone Locked: Hardcoded to America/Chicago to ensure Pre-Market and Opening Range calculations remain accurate regardless of your local computer settings. Non-Repainting: Daily and Weekly levels are locked using closed-candle data (lookahead_on), ensuring lines do not shift during the trading day. Buffer Safe: Optimized drawing logic prevents historical buffer errors, even on lower timeframes (1m/5m). 4. Customization Toggle Everything: Every single level has an individual "Show/Hide" checkbox in the settings. Label Sizing: Adjustable text size (Tiny to Huge) and offset positioning. Compact Mode: Option to switch between full names ("Previous Day High") and abbreviations ("PDH").
Pine Script® 인디케이터
Prospecttrades의
1
Premium Volume Divergence Signals [Stansbooth]Advanced Divergence Indicator This indicator is designed to uncover the hidden relationship between price action and momentum. By accurately detecting when price and momentum move in different directions, it highlights bullish and bearish divergences at critical market points — often before reversals or strong continuations occur. 🔹 Key Features: Precise detection of Regular and Hidden Divergence Helps identify early market reversals Clean, clear, and easy-to-read visual signals Works across Forex, Crypto, and Stock markets Suitable for all timeframes and trading styles This indicator empowers traders to make smarter entries, confident exits, and better risk management decisions. Instead of chasing the market, it allows you to anticipate price movement with confidence. Trade smarter, not harder — let divergence reveal the real market strength.
Pine Script® 인디케이터
stans_booth의
HMA & RSI Delta Hybrid SignalsA lag-free trend follower combining Hull Moving Average (HMA) with RSI Momentum Delta to filter false signals and catch high-probability reversals. # 🚀 HMA & RSI Delta Hybrid Signals This indicator represents a hybrid approach to trend trading by combining the smoothness of the **Hull Moving Average (HMA)** with the explosive detection capabilities of **RSI Momentum Delta**. Unlike standard indicators that rely solely on price crossovers, this tool confirms the trend direction with the *velocity* of the price change (Momentum Delta), reducing false signals in choppy markets. ### 🧠 How It Works? **1. Trend Detection (HMA):** The script uses the **Hull Moving Average**, known for being extremely fast and lag-free, to determine the overall market direction. * **Orange Line:** Represents the HMA Trend. The slope determines if we are in an Uptrend or Downtrend. **2. Momentum Confirmation (RSI Delta):** Instead of looking at raw RSI levels (like 70 or 30), this algorithm calculates the **"Delta"** (Absolute change from the previous bar). * It asks: *"Is the price moving in the trend direction with enough speed?"* * If the RSI jumps significantly (determined by the `Delta Threshold`), it confirms a strong entry. ### 🎯 Signal Modes (Sensitivity) You can choose between two modes depending on your trading style: * **🛡️ Conservative Mode (Default):** * Strict filtering. * Requires the Trend to match the HMA direction AND the RSI Delta to exceed the specific threshold (e.g., 0.8). * *Best for:* Avoiding false signals in sideways markets. * **⚔️ Aggressive Mode:** * Faster entries. * Requires the Trend to match the HMA direction AND any positive momentum change in RSI. * *Best for:* Scalping or catching the very beginning of a move. ### ✨ Key Features * **Non-Repainting Signals:** Once a bar closes, the signal is fixed. * **Non-Repeating:** It will not spam multiple "BUY" signals in a row; it waits for a trend change or reset. * **Visual Trend:** Background color changes based on the HMA slope (Green for Bullish, Purple for Bearish). * **Fully Customizable:** Adjust HMA length, RSI period, and Delta sensitivity. --- **⚠️ DISCLAIMER:** This tool is for educational and analytical purposes only. Always manage your risk.
Pine Script® 인디케이터
OsilatorindicatorPro의
PDH/PDL + Alerts + Liquidity Sweep ReversalThis indicator is designed for traders who utilize Price Action to identify high-probability reversal zones at daily liquidity levels. It automatically plots the Previous Day High (PDH) and Previous Day Low (PDL) and monitors them for institutional "fake-outs" or liquidity sweeps. Core Functionality Daily Liquidity Levels: Automatically fetches and plots the PDH and PDL with custom labels and line styles. Strict Reversal Logic: Unlike standard breakout indicators, this script looks for specific "trap" behavior where price pierces a level and is immediately rejected. Institutional Precision Tooltips: Includes built-in precision guides for Wick Percentages and Lookback counts based on professional trading standards. The "Strict Reversal" Setup The indicator only triggers a Buy/Sell label when three specific criteria are met: The Lookback: The level must have been respected as a boundary for a user-defined number of candles (Default: 7), confirming its strength. The Sequence: The candle must open on the "safe" side of the level, pierce through it to grab liquidity, and then close back on the original side. The Rejection (Wick %): The candle must leave a significant wick (Default: 72%). This 72% threshold aligns with the 2.5x Wick-to-Body ratio, signaling a violent institutional rejection. Alert Options The script features four consolidated alert conditions for seamless automation: Sell Signal (Rejection): Triggers on strict bearish wick sweeps at key levels. Buy Signal (Rejection): Triggers on strict bullish wick sweeps at key levels. Price Cross Up: Alerts when price breaks above either PDH or PDL. Price Cross Down: Alerts when price breaks below either PDH or PDL. How to Use Scalping: Use a 3–5 candle lookback on the 1m or 5m timeframe. Intraday Reversals: Use the 7–10 candle lookback on the 5m or 15m timeframe for standard SMC setups. Swing Trading: Use the 15+ candle lookback on the 1h or 4h timeframe to target major daily liquidity pools.
Pine Script® 인디케이터
rushishikhare50의
Plan Your Trade, Trade Your Plan. Levels. - by TenAMTrader📍 Plan Your Trade, Trade Your Plan. Levels. — by TenAMTrader Successful trading is rarely about predicting — it’s about preparing. "Plan Your Trade, Trade Your Plan. Levels" is designed to bridge the gap between analysis and execution by forcing clarity before the trade ever happens. Instead of reacting to price in real time, this tool encourages traders to define their plan, map their key levels, and then simply trade what they already decided. 🧠 Why Planning Matters Most trading mistakes don’t come from bad analysis — they come from abandoning a plan mid-trade. Emotions take over when levels aren’t clearly defined ahead of time. This indicator is built around a simple philosophy: Make the plan first. Trade the plan second. By writing your thesis directly into the indicator and visually anchoring it to price, you remove ambiguity and hesitation when the market starts moving. 📊 What This Indicator Does Converts your written trade plan or market outlook into clearly plotted price levels Automatically identifies: Pivot level (key decision point) Resistance levels (above pivot) Support levels (below pivot) Displays contextual notes directly on the chart so you always remember why a level matters Keeps your focus on execution, not interpretation ✍️ How to Use It Paste your daily or weekly plan into the Input your Plan/Levels box Let the script extract and plot the levels automatically Observe how price behaves around predefined zones Execute only what aligns with your original plan No guesswork. No moving targets. 🎯 Designed For Traders who value structure and discipline Futures, index, and equity traders who trade key levels Traders focused on process over prediction ⚠️ Important Disclaimer This indicator is provided for educational and informational purposes only and does not constitute financial advice, investment advice, or a recommendation to buy or sell any security, futures contract, or financial instrument. Trading involves substantial risk and is not suitable for all investors. Past performance is not indicative of future results. All trading decisions, risk management, and position sizing are the sole responsibility of the user. By using this indicator, you acknowledge that TenAMTrader assumes no liability for any losses, damages, or decisions made based on its use. Trade prepared. Trade disciplined. "Plan Your Trade, Trade Your Plan. — TenAMTrader
Pine Script® 인디케이터
TenAM_Trader의
Market NavigatorIntroducing Market Navigator: The Ultimate Trading Indicator for Forex and Gold Markets In today’s fast-paced trading world, having all-in-one tools that provide clarity and actionable insights is more critical than ever. The FINAL EMA 05 indicator is a comprehensive TradingView tool designed to help traders spot trends, key levels, and market reversals—all on a single chart. This indicator combines 8 EMAs, Delta Zones, Swing Highs/Lows, Candle Patterns, and Liquidity Channels—making it perfect for Forex, Gold (XAUUSD), and other major markets. 1. Multi-Timeframe EMAs for Trend Clarity The indicator includes 8 EMAs: EMA 7 & 9 – Short-term trend detection EMA 10 & 20 – Short-to-mid-term trend confirmation EMA 50 & 89 – Mid-to-long-term trend EMA 100 & 200 – Long-term trend and strong support/resistance levels Each EMA can be customized with a different length, color, width, and timeframe, making it easy to visualize both local and major market trends. ✅ Why it matters: EMAs help traders quickly identify whether the market is in an uptrend or downtrend, and spotting EMA crossovers can signal potential trade entries. 2. Delta Zones: Detect Buy & Sell Pressure Delta Zones identify buying and selling pressure by analyzing price movement deviations. The system plots green “Buy Boxes” when bullish pressure is high and red “Sell Boxes” when bearish pressure dominates. Configurable StdDev levels and lookback periods Alerts when buy or sell pressure is detected ✅ Why it matters: Delta Zones give traders an edge by visually highlighting where buyers or sellers are strongest, helping to anticipate market moves. 3. Swing Highs & Lows with Candle Patterns FINAL EMA 05 automatically detects: Swing Highs (HH/LH) and Swing Lows (LL/HL) Key candlestick patterns including Hammer, Inverted Hammer, Bullish Engulfing, Hanging Man, Shooting Star, and Bearish Engulfing Labels are plotted directly on the chart, with tooltips explaining the pattern, making it perfect for beginners and experienced traders alike. ✅ Why it matters: Swing levels and candle patterns help identify market reversals and trend continuations, allowing precise entry and exit timing. 4. Liquidity Channels: Spot Key Levels for Big Moves Liquidity Channels detect important highs and lows where large traders may have placed their orders. The channels expand over time and are visually highlighted: Teal lines for bullish liquidity Red lines for bearish liquidity Customizable channel growth, line style, and deletion timing ✅ Why it matters: These levels often act as support and resistance zones, and price reactions at these points can indicate major breakouts or reversals. 5. Why Bangladeshi Traders Should Use FINAL EMA 05 Gold (XAUUSD) & Forex Focus: The EMAs and Delta Zones provide accurate trend direction, while liquidity levels show where institutional traders are active. Multi-Timeframe Insights: Short-term traders can focus on EMA 7, 9, and 10, while swing traders can watch EMA 50, 89, and 200. All-in-One View: No need to add multiple indicators; this script combines trend, pressure, patterns, and liquidity in one. Conclusion The FINAL EMA 05 indicator is not just another EMA or candlestick tool—it’s a complete trading toolkit. By combining trend analysis, pressure zones, swing levels, candlestick patterns, and liquidity channels, it empowers traders to make informed, precise, and confident decisions. Whether you’re trading USDJPY trends, Gold XAUUSD, or Forex pairs, this indicator helps you spot
Pine Script® 인디케이터
Fxdeal-academy의
Opening Range Breakout & Targets [Strategy] (Fixed + Alerts)This strategy backtests a classic Opening Range Breakout approach using a configurable opening range window (time-based OR or custom session). Once the opening range is completed, the strategy waits for price to break above ORH (Opening Range High) or below ORL (Opening Range Low) and enters in the direction of the breakout. Targets are derived directly from the opening range width: OR Width = ORH − ORL Target Step = OR Width × Target % Take-profit is placed at the selected Target # (T1, T2, etc.) An optional Daily Bias filter can be enabled to reduce false breakouts by comparing today’s opening range midpoint (ORM) to the previous session’s ORM. When bias is active, breakouts against the bias can require a stronger confirmation (break beyond the first target step). Risk management is configurable via multiple stop options: Stop at Opposite OR Stop at OR Midpoint Stop at 1× Target Step Or disable stops for custom management Includes support for: Long/Short/Both modes One trade per session option Optional exit on opposite breakout Separate alert conditions (when used with the companion indicator) Note: This is a backtesting tool. Always validate results across symbols/timeframes and account for slippage/commissions before live use.
Pine Script™ 전략
nirmaltrades의