지금 시작

Candlestick analysis

Simple Liquidity Zones [Supertrade]🔎 What this indicator does This indicator is designed to highlight liquidity sweep zones on the chart. • A liquidity sweep occurs when price briefly breaks above a recent swing high or below a recent swing low, but fails to close beyond it. • Such behavior often indicates that price has taken liquidity (stop orders resting above highs or below lows) and may reverse. The indicator marks these events as bullish or bearish liquidity zones: • Bullish Zone (green) → Price swept a swing low and closed back above it (possible bullish reversal area). • Bearish Zone (red) → Price swept a swing high and closed back below it (possible bearish reversal area). These zones are drawn as shaded horizontal bands that extend forward in time, providing visual areas where liquidity grabs occurred. ________________________________________ ⚙️ How calculations are made The indicator does not use moving averages or smoothing. Instead, it works with raw price action: 1. Swing Detection → It checks the highest high and lowest low of the past N bars (swing length). 2. Sweep Logic → o A bearish sweep happens if the high breaks above the previous swing high, but the close returns below that level. o A bullish sweep happens if the low breaks below the previous swing low, but the close returns above that level. 3. Zone Creation → When a sweep is detected, a shaded zone is drawn just above/below the swing level. 4. Persistence → Zones extend into the future until replaced by new ones (or optionally until price fully trades through them). This makes the calculations simple, transparent, and responsive to actual market structure without lag. ________________________________________ 📈 How it helps traders This tool helps traders by: • Visualizing liquidity areas → Shows where price previously swept liquidity and may act as support/resistance. • Identifying reversals → Helps spot potential turning points after liquidity grabs. • Risk management → Zones highlight areas where stops may be targeted, useful for positioning stop-loss orders. • Confluence tool → Works best when combined with other strategies such as order blocks, trendlines, or volume analysis. ⚠️ Note: Like all indicators, this should not be used in isolation. It provides context, not guaranteed trade signals. ________________________________________ 🏦 Markets & Timeframes • Works across all markets (crypto, forex, stocks, indices, commodities). • Particularly effective in high-liquidity environments where stop-hunting is common (e.g., forex majors, BTC/ETH, S&P500). • Timeframes: o Lower timeframes (1m–15m) → Scalpers can spot intraday liquidity sweeps. o Higher timeframes (1H–1D) → Swing traders can identify major liquidity pools. ________________________________________
Pine Script® 인디케이터
SupertradeOfficial의
True Order Block (OB) True Order Block (OB) This script automatically detects and plots Order Blocks (OBs) based on the presence of Fair Value Gaps (FVGs). Only Order Blocks are displayed on the chart. 🔎 How it works The script looks for Fair Value Gaps (FVGs) according to a relaxed 3-candle definition. Once an FVG is detected: For a Bullish FVG → the last bearish candle before the gap is marked as the Bullish Order Block. For a Bearish FVG → the last bullish candle before the gap is marked as the Bearish Order Block. OBs are extended into the future until price either: mitigates the zone (optional auto-removal), or the number of live OBs exceeds the user’s maximum (FIFO cleanup). ⚙️ User settings Draw Order Blocks (enable/disable plotting) Minimum OB length (how far each zone extends initially) Remove OB after violation (auto delete invalidated zones) Max active OBs (limit on displayed zones for clarity) Bullish/Bearish OB colors ✅ Key features Fully automated OB detection No clutter – only OBs are plotted (FVG logic hidden in the background) Smart cleanup: mitigated zones are removed automatically Customizable colors & limits ⚠️ Notes This tool is designed for educational and analytical purposes only. It does not generate trade signals. Always combine with your own strategy, market context, and risk management.
Pine Script® 인디케이터
tjarzabek의
X FocusDesigned to help traders reduce distractions by de-emphasizing specific time ranges on the chart. Instead of highlighting high-activity zones, this tool intentionally applies a muted overlay to selected sessions, allowing traders to concentrate on price action that occurs outside those designated ranges. Core Purpose The primary goal of this indicator is to combat the “noise” that often arises during certain periods, such as overnight sessions or pre-market trading. By visually softening those areas, traders can focus on the more relevant trading windows WITHOUT losing any time-based context. Unlike traditional tools that remove data entirely, X Focus preserves all candlestick and price information—ensuring that key levels, gaps, or reference values are still visible. Key Features Custom Session Filtering Users can define up to three time ranges depending on preference. This flexibility allows for tailoring the indicator to different market strategies. De-Emphasis by Design Instead of masking or deleting data, the indicator overlays a semi-transparent shading box over the chosen sessions. This ensures traders remain aware of the data while maintaining visual focus on the price action outside of the selected time blocks. Dual Utility – Highlight or Suppress While built on the principle of minimizing distractions, the same framework can also be used in reverse to highlight specific areas of interest. This versatility makes it suitable for both noise-reduction and spotlighting critical ranges. Dark Mode / Light Mode Adjustable color schemes allow seamless integration into any chart setup, whether the user prefers dark or light backgrounds. Non-Intrusive Visualization The shading effect is applied without altering price bars, indicators, or other overlays. This ensures compatibility with existing technical tools and strategies. Use Case Traders who find themselves reacting too strongly to inconsequential movements during certain times (such as after-hours or low-volume sessions) can benefit from the X Focus indicator. It helps maintain clarity and discipline by visually guiding attention toward the periods that matter most—without erasing or ignoring potentially useful price references.
Pine Script® 인디케이터
KinetiCapital의
BOS & CHoCH (v6, UA)The logic of the trading strategy This is a well-structured and concise summary of a trading strategy based on market structure analysis. Here is the English translation. Swings ta.pivothigh/low on a selected structure timeframe (TF). When a swing is confirmed, we fix the level and the bar_index of the current chart as an anchor for a horizontal line. BOS (Break of Structure) A breakout of the last Swing High (SH) or Swing Low (SL) in the direction of the current trend. CHoCH (Change of Character) A breakout against the trend, signaling a potential trend reversal. Breakout By close or by high/low (you can switch the breakout confirmation mode to closing price).
Pine Script® 인디케이터
sezikua의
1
XAU 1H Clean Confluence — Micro Table v2XAU 1H Clean Confluence — Micro Table What it is A clean, low-clutter 1-hour XAUUSD indicator that summarizes confluences in a compact on-chart table. It’s designed for traders who want structure + momentum + location without covering the chart in drawings. Best used on: ICMARKETS:XAUUSD or your broker’s XAUUSD feed, 1H timeframe. Style: Table-only by default (optional EMA200 line and tiny signal markers). How signals are built (long example; shorts mirror) A Long Confluence is printed when all of the below are true: Trend alignment: EMA20 > EMA50 > EMA200 Pullback & re-engage: price crossed back above EMA20 after a pullback RSI regime: RSI(14) crosses up through 50 (trend confirmation) Displacement/imbalance: a 3-candle Bull FVG exists (low > high ) Structure: either a BOS up or CHOCH up via swing pivots (pivotLen input) Sweep (optional): if enabled, require a sweep of Asian Low and/or PDL first Time gating (optional): only during London/NY windows and outside news windows Short signals use the mirrored conditions (EMA stack down, cross back below EMA20, RSI cross down through 50, Bear FVG, BOS/CHOCH down, optional Asian High/PDH sweep).
Pine Script® 인디케이터
TroutyTrades의
Long Elite Squeeze (LES) — H.H 22 Lindsay (AI)LES (Long Elite Squeeze) LES (Long Elite Squeeze) is a trading framework designed to capture the highest-probability long setups. It’s not just another signal script — it’s a structured system built to filter noise, manage risk, and keep you aligned with real momentum. 🔹 Core Logic Breakout Confirmation – Ensures moves have structure, not just random spikes. Relative Volume (RVOL) – Confirms participation and fuel behind the move. RSI Alignment – Avoids overextended traps and fakeouts. Squeeze Momentum – The backbone of LES. Signals fire only after a defined squeeze pattern shift (6+ dark green bars followed by a light green bar). 🔹 Trade Management Built In Automated Sell Signals – Trigger on either: 2 consecutive dark green bars on Squeeze Momentum WaveTrend cross down (only valid after a Buy signal — no random shorts) HUD Entry Checklist – Live conditions shown on chart. Status Tracker HUD – Flips between “Waiting for Entry” and “In Trade” for clear context. 🔹 Flexibility 3 switchable squeeze versions (V1, V2, V3) for different market conditions. Customizable EMA & ATR settings (with color options). Session-aware logic — filter signals to prime trading hours. 🔹 Blueprint & Credits LES is a fusion of proven concepts, standing on the shoulders of respected creators: -Squeeze Momentum – LazyBear -WaveTrend Oscillator – LazyBear -Relative Volume – LonesomeTheBlue Breakout/structural logic – refined from classic frameworks Their work laid the foundation — LES expands and integrates them into a complete trading system. ⚡ Why LES Stands Out LES wasn’t coded overnight. It’s the result of countless hours of live testing, rebuilding, and refining. Every feature earned its place by proving value in real trading, not theory. LES is more than an indicator. It’s a disciplined framework — crafted to turn chaos into structure, randomness into probability, and noise into clarity. ⚠️ Disclaimer: This is a trading framework, not financial advice. Performance depends on trader discipline, risk management, and market conditions.
Pine Script® 인디케이터
ElitexFineFir의
5
RCI Buy/Sell Signals RCI Buy/Sell Signals — Dual-RCI State Machine with EMA Bias (Protected) A purpose-built signal tool that combines two RCI horizons with a deterministic state machine and an EMA-based background bias. It is not a simple mashup: the components are designed to work together so that trend context, timing, and exits form a coherent workflow. The code remains closed-source to protect a proprietary implementation; this description explains what it does and how the pieces interact so traders can evaluate it. What it does On-chart signals: Marks potential BUY/SELL entries and EXITs directly on the chart (markers are drawn with a −1 bar offset for readability). Trend bias at a glance: Background shading reflects EMA context: Green when price is above both EMA1 and EMA2 Red when price is below both EMA1 and EMA2 No shading otherwise (EMA lengths and timeframes are user-configurable.) Deterministic state machine: Ensures only one active side at a time (flat → long/short → exit), so entries/exits do not overlap or contradict each other. How it works (conceptual) Two-horizon RCI framework: A MID-RCI monitors regime transitions using mid-range thresholds. A LONG-RCI acts as a slower directional filter/validator. Two timing modes (you can enable either or both): Steadily — MID-RCI transitions across mid-band thresholds (e.g., around −50/50) govern entries; LONG-RCI direction is used to confirm/align. Above — LONG-RCI crosses its pivotal level (around zero) with directional agreement. These modes are integrated—not stacked randomly—so that one provides timing, the other directional context. Exits & risk guard: Exits trigger on MID-RCI reaching extreme bands (e.g., ±85) or when price violates a simple N-bar extremum stop (default: 20-bar low/high), whichever comes first. This makes exits explicit rather than relying on a trailing overlay. Why this is not “just a merge” The EMAs are not a separate indicator pasted on top; they only provide a binary bias that gates background shading and helps filter entries visually. The RCI pair is functionally split (timing vs. confirmation) and then synchronized through a state machine that prevents conflicting signals and enforces clean transitions. The script ships with signal placement discipline (−1 offset markers for clarity) and built-in exit logic based on RCI extremes plus a simple context stop—an integrated design choice, not an ad-hoc mix. Inputs (overview) Display: Show Entry Signals / Show Exit Signals / Show Background Context: EMA1/EMA2 lengths & timeframes (background bias only) RCI: Long/Mid lengths and source How to use Apply the script on a clean chart (no other indicators unless you explain why). Use the background color as high-level bias, then use the on-chart signals for timing. Optionally set alerts with “Any alert() function call” to receive signal notifications. Confirm with your own risk management, liquidity checks, and higher-timeframe confluence. Notes on publication (for moderators & traders) Closed-source rationale: The specific RCI ranking/threshold scheme and the state-machine selection logic are part of ongoing proprietary research; the code is protected. This description details the concepts and interactions sufficiently to understand what the script does and how components work together, while preserving implementation specifics. Disclaimer For educational/informational purposes only; not financial advice. Test thoroughly before live use. Trading involves risk.
Pine Script® 인디케이터
toshival034의
TDT Candle CounterThis indicator allows you to count candles inside a custom date range and display labels directly on the chart. It supports three different counting modes: 🔢 Modes Every Candle → Marks every bar sequentially (1, 2, 3, 4, …). Alternative Sequence → Marks bars that match the sequence 1, 5, 9, 17, 25, 37, …. Special Sequence (default) → Marks bars that match the sequence 1, 3, 7, 13, 21, 31, …. Each mode has its own color so you can quickly distinguish which cycle is active. ⚙️ Features Custom start and end date for the counting period. Option to highlight the active period with a background color. Labels are positioned above or below candles depending on the initial direction. Alerts when: Counting starts Counting ends 🎯 Use Cases Visualize candle sequences for cycle analysis. Track market structure with custom numerical references. Combine with other tools to study periodic behavior. Inspired by Time Dilation Theory (TDT) This counting approach is inspired by the Time Dilation Theory (TDT) methodology created by ICT Morpheus. According to TDT, markets unfold in cycles of 1, 3, 7, 13, 21… etc., reflecting natural rhythms of expansion, contraction, and distortion—an idea grounded in fractal time behavior across multi-timeframe analysis Incorporating TDT principles into this tool helps visualize and align potential turning points and momentum shifts across different timeframes.
Pine Script® 인디케이터
tjarzabek의
1
Custom Volume + Buyer & Price %Title: Custom Volume + Buyer & Price % Description: This indicator helps you see who is controlling the market — buyers or sellers — using volume and price action. It works even if your chart is on a small timeframe (like 5-min or 15-min), by showing Daily, Weekly, and Monthly information from the higher timeframe volume charts. Key Features & How It Works: Buyer % (B%): Measures where the closing price is within the high-low range of a candle. Calculation: \text{Buyer %} = \frac{\text{Close} - \text{Low}}{\text{High} - \text{Low}} \times 100 Interpretation: > 50% → Buyers are stronger < 50% → Sellers are stronger 50% → Balanced Volume Coloring: Volume bars are colored based on Buyer %, not price movement: Green → Buyers dominate Red → Sellers dominate Yellow → Balanced day Higher Timeframe Insight: Displays Daily, Weekly, and Monthly volume & Buyer % even if your chart is on a smaller timeframe. Lets you understand long-term buying or selling pressure while trading intraday. 21-Day Average: Shows average Buyer % and average volume over the past 21 days for trend context. Why It’s Useful: Quickly visualize whether the market is buyer-driven or seller-driven. Identify strong accumulation or distribution days. Works on any chart timeframe while giving higher timeframe perspective. Ideal for traders who want easy, visual insight into market sentiment.
Pine Script® 인디케이터
venkat_27의
RangeSuper Pro – Vivid Violet & Electric Style 🚀RangeSuper Pro – Electric Style RangeSuper VIOLET – Advanced Trend & Range Filter Strategy for TradingView The RangeSuper VIOLET indicator combines a modern range filter and SuperTrendlogic, visually enhanced with vivid green and violet bands for clear trend identification. This tool is designed for active traders who want to capture both breakout and trend-following opportunities on indices like NIFTY. Features: • Detects high-probability LONG and SHORT setups with color-coded bands. • “BIG TARGET” labels highlight major combined signals; small labels mark scalp entries. • Adaptive bands change color with market conditions (green for bullish, violet for bearish). • Built-in scalp strategy with automatic TP/SL (Take Profit/Stop Loss) management. • Comprehensive performance stats, including profit factor, equity curve, and drawdown, are available via the TradingView strategy tester. How to Use: Use on 15-minute or higher timeframes for best results. Follow the visual signals and labels for potential trade entries and exits. Review performance and trade analysis in the built-in strategy tester. For access or questions, request an invite or contact the developer directly. Unlock smarter trend trading with RangeSuper VIOLET! 📌 **Important Notes:** - 🟢 Signals are real-time & backtest-matching (normal 1–2 pt slippage can occur its normal ) - 🧪 This tool has been **extensively tested**, and results shown are from actual backtests on TradingView 🔒 Access is invite-only for quality control ⚠️ Disclaimer: Shared for learning and research purposes only. Not financial advice. Past educational results don't guarantee future outcomes. Trading involves risk of loss. We are not SEBI registered.
Pine Script™ 전략
pharsha8676의
Strong Trend CandlesThis indicator highlights trend candles using a mathematically grounded method designed to identify moments when the market is truly dominated by buyers or sellers Up-Trend Candle (UP): The open is close to the session’s low. The close is close to the session’s high. This structure reflects sustained bullish control from start to finish. Down-Trend Candle (DOWN): The open is near the high. The close is near the low. This reflects clear bearish control throughout the session. Precise Definitions Used: UP-Trend Candle: Open ≤ Low + 10% of range Close ≥ High - 20% of range DOWN-Trend Candle: Open ≥ High - 10% of range Close ≤ Low + 20% of range Here, the range is simply High - Low. Why are the thresholds different (10% vs 20%)? This is intentional and based on how markets behave: The opening price tends to be precise and stable in trend days. A strong trending candle usually opens very close to one end (high or low), reflecting a clean start without hesitation. The closing price, however, often pulls back slightly before the end of the session—even during strong trends—due to profit-taking or last-minute volatility. That’s why the close is allowed more tolerance (20%), while the open is held to a stricter threshold (10%). This balance allows the indicator to be strict enough to filter noise, yet flexible enough to capture real trends. ✅ Why this is useful Unlike vague candle patterns like "bullish engulfing" or "marubozu," this method focuses strictly on structure and positioning, not color or subjective shape. It isolates the candles where one side clearly dominated, offering cleaner entries for breakout, continuation, or confirmation strategies. You can use this tool to: Spot high-momentum price action Confirm breakouts or directional bias Filter setups based on strong market conviction 🔹 How it works An Up-Trend Candle is detected when the open is close to the daily low and the close is close to the daily high. A Down-Trend Candle is detected when the open is close to the daily high and the close is close to the daily low. The thresholds for “close to high/low” are configurable through the Open % of Range and Close % of Range inputs. 🔹 How to use it Candles are colored according to their classification. Colors can be customized in the settings. This tool can be applied in any timeframe. ⚠️ Notes: This script does not generate buy/sell signals. It is designed to help visualize strong candles based on intraday range conditions.
Pine Script® 인디케이터
sabinaGM의