지금 시작

Candlestick analysis

Liquidity Sweep Guardian (Universal % or point based) Liquidity Sweep Guardian - Complete User Guide ## Overview The **Liquidity Sweep Guardian** is a visual warning system designed to prevent premature counter-trend trades (fades) near Previous Day High (PDH) and Previous Day Low (PDL) levels. This indicator helps you avoid one of the most common trading mistakes: fading too early before liquidity sweeps complete. --- ## 🎯 Core Trading Principle ### **THE GOLDEN RULE: Don't Fade Until It's Unlocked** Price often **accelerates into key levels** to sweep liquidity before reversing. Trading against this momentum is extremely dangerous. **The Process:** 1. **Danger Zone** (Red/White Box) = ⚠️ **DO NOT FADE** - Sweep likely incoming 2. **Sweep Occurs** (Triangle marker appears) = Price penetrates the level 3. **Reclaim Happens** (Price returns above/below level) = Level is tested 4. **🔓 UNLOCKED** (Gold border, green label) = **NOW you may CONSIDER a fade** > **Important:** "UNLOCKED" means you may now *consider* a fade setup. It is NOT a trade signal itself. You still need your entry confirmation, risk management, and trade plan. --- ## 📊 Visual Elements Explained ### 1. **Danger Zone Boxes (Red Border by Default)** **Two types of zones around PDH/PDL:** - **Outer Danger Zone** (White fill): ±75pts (or 0.30%) around the level - Indicates proximity to a key level where sweeps commonly occur - Yellow/cautious trading zone - **Inner Critical Zone** (Black fill): ±25pts (or 0.10%) around the level - Highest probability area for liquidity sweep traps - Avoid fading here at all costs **What to do:** - When price enters these zones, **wait and watch** - Do not initiate counter-trend positions - Allow the sweep to play out ### 2. **Unlocked Zones (Gold Border #ffeb3b)** When a zone turns **gold/yellow** with green fill: - The level has been swept AND reclaimed - The liquidity grab is complete - You may now look for fade opportunities with proper confirmation ### 3. **PDH/PDL Lines** - **PDH Line** (Red): Previous Day High with price label - **PDL Line** (Green): Previous Day Low with price label - These are your key reference levels for the session ### 4. **Sweep Labels** **Triangle Markers (SWEEP):** - **Green Triangle** = Clean sweep (10-25pts penetration) - **Orange Triangle** = Extended sweep (25-50pts penetration) - **Red Triangle** = Deep penetration (50+ pts) - likely continuation, not reversal **Warning Labels:** - **⚠️ DEEP CONTINUATION?** = Penetration too deep, probably NOT a reversal setup **Unlock Labels:** - **🔓 LONG UNLOCKED** = PDL swept and reclaimed, may consider long fades - **🔓 SHORT UNLOCKED** = PDH swept and reclaimed, may consider short fades --- ## ⚙️ Settings Guide ### **Calculation Mode** **Use Percentage Mode (Default: ON)** - ✅ **Enabled**: Universal mode - works on NQ, ES, RTY, stocks, crypto, forex - ❌ **Disabled**: Fixed points mode - for specific instruments only **When to use each:** - **Percentage Mode**: Trading multiple instruments, or instruments with varying price levels - **Fixed Points Mode**: Single instrument focus (e.g., only trading NQ at current levels) ### **Danger Zone Settings** **Percentage Mode (Default for Universal Use):** - **Danger Zone**: 0.30% each side (≈75pts on NQ@25,000) - **Critical Zone**: 0.10% each side (≈25pts on NQ@25,000) **Fixed Points Mode (For NQ Specifically):** - **Danger Zone**: 75 points each side - **Critical Zone**: 25 points each side **Adjustment Tips:** - For more volatile instruments: Increase percentages/points - For less volatile instruments: Decrease percentages/points - For higher timeframes: Use wider zones - For lower timeframes: Use tighter zones ### **Sweep Classification** **What defines a "real" sweep:** - **Minimum**: 10pts / 0.04% - Shallow penetration may not grab enough liquidity - **Optimal**: 10-25pts / 0.04-0.10% - "Goldilocks zone" for reversal setups - **Extended**: 25-50pts / 0.10-0.20% - Deeper sweep, less reliable - **Continuation**: 50+pts / 0.20%+ - Too deep, likely NOT reversing **Max Bars for Reclaim**: 5 bars (default) - Price should reclaim the level relatively quickly - If it takes too long, the sweep may have failed ### **Visual Customization** **Box Settings:** - **Left Extension**: 60 bars (how far back the box extends) - **Right Extension**: 50 bars (how far forward the box extends) **Toggle Options:** - Show/Hide Danger Zone Boxes - Show/Hide PDH/PDL Lines - Show/Hide Price Labels on lines - Show/Hide Sweep Labels - Show/Hide Unlock Labels ### **Color Customization** All colors are fully customizable: - Danger Zone Fill & Border - Critical Zone Fill & Border - Unlocked Zone Fill & Border - PDH/PDL Line Colors - PDH/PDL Label Colors - Border Widths (1-5 pixels) - Line Widths (1-5 pixels) --- ## 🎓 Trading Strategy Examples ### **Example 1: Long Setup at PDL** 1. **Morning**: Price approaches PDL (danger zone appears) 2. **Don't Fade Yet**: Price enters critical zone - resist urge to buy 3. **Sweep**: Price drops 15pts below PDL (green triangle appears) 4. **Reclaim**: Price closes back above PDL within 3 bars 5. **🔓 UNLOCKED**: Gold border + "LONG UNLOCKED" label appears 6. **Trade Setup**: Now look for bullish confirmation (order flow, structure, etc.) ### **Example 2: Avoiding a Trap at PDH** 1. **Afternoon**: Price rallies into PDH danger zone 2. **Temptation**: You want to short here (it "looks toppy") 3. **Sweep**: Price breaks 50pts above PDH (red triangle + ⚠️ warning) 4. **Continuation**: Deep penetration suggests continuation, not reversal 5. **Result**: No unlock occurs, price keeps running higher - trap avoided! ### **Example 3: Failed Unlock (No Trade)** 1. Price sweeps PDL by 12pts (green triangle) 2. Price struggles to reclaim PDL, stays below for 10+ bars 3. No "UNLOCKED" label appears 4. **Correct Action**: Do not fade - sweep failed to reclaim --- ## 📱 Alerts The indicator includes built-in alerts for: - **Entering Danger Zones**: Get warned when price approaches PDH/PDL - **Sweep Detection**: Know immediately when a level is swept - **Unlock Signals**: Get notified when fade setups become available - **Continuation Warnings**: Alert when penetration suggests continuation **To Set Alerts:** 1. Right-click indicator → "Add Alert" 2. Select desired alert condition 3. Configure notification preferences --- ## ⚠️ Important Disclaimers ### **What This Indicator IS:** ✅ A visual warning system to prevent premature fades ✅ A tool to identify when liquidity sweeps have completed ✅ A framework for counter-trend trade timing ### **What This Indicator IS NOT:** ❌ A complete trading system ❌ An entry signal generator ❌ A guarantee of trade success ❌ A substitute for proper risk management ### **Always Remember:** - "UNLOCKED" = You may CONSIDER a fade (not a signal to trade) - You still need your own entry confirmation - You still need proper stop placement - You still need position sizing and risk management - Not every unlock leads to a successful trade - Market context and order flow still matter --- ## 🔧 Recommended Settings by Instrument ### **NQ (Nasdaq-100 E-mini Futures)** - Mode: Percentage or Fixed Points - Percentage: 0.30% / 0.10% (default) - Fixed Points: 75pts / 25pts (default) ### **ES (S&P 500 E-mini Futures)** - Mode: Percentage - Danger: 0.25% / Critical: 0.08% - Or Fixed Points: 15pts / 5pts ### **RTY (Russell 2000 E-mini Futures)** - Mode: Percentage - Danger: 0.35% / Critical: 0.12% - Or Fixed Points: 8pts / 3pts ### **Stocks (High Volume Large Caps)** - Mode: Percentage (recommended) - Danger: 0.20-0.40% / Critical: 0.08-0.15% - Adjust based on ATR and volatility ### **Crypto (BTC, ETH)** - Mode: Percentage (essential) - Danger: 0.40-0.60% / Critical: 0.15-0.20% - Higher volatility requires wider zones --- ## 💡 Pro Tips 1. **Use on Higher Timeframes**: Works best on 5min, 15min, 1hr charts 2. **Combine with Order Flow**: Use with footprint/delta for confirmation 3. **Watch Volume**: Strong volume on sweep = better reversal potential 4. **Consider Time of Day**: Sweeps during RTH often more reliable 5. **Multiple Timeframes**: Check if higher TF also shows unlock 6. **Don't Force Trades**: Not every session produces clean setups 7. **Journal Results**: Track which unlock types work best for you 8. **Respect Continuation Signals**: When indicator says "too deep," listen --- ## 🆘 Troubleshooting **Q: Box isn't showing up** A: Check that "Show Danger Zone Boxes" is enabled in Visual Settings **Q: No price on labels** A: Enable "Show Price Labels on Lines" in Visual Settings **Q: Zones seem too tight/wide** A: Adjust Danger Zone % or points based on current volatility **Q: Getting too many/too few unlocks** A: Adjust sweep classification thresholds (min/max penetration) **Q: Want thicker/thinner lines** A: Adjust line widths in "PDH/PDL Line Colors" section **Q: Colors not matching my chart theme** A: Fully customize all colors in the color settings groups --- ## 📚 Additional Resources - Study price action around PDH/PDL on your instruments - Learn about liquidity sweeps and stop hunts - Understand market structure and order flow - Practice identifying setups on replay/historical data - Keep a trading journal of unlock scenarios --- *Remember: The best trade is often the one you don't take. This indicator helps you avoid the trades you shouldn't take, so you can focus on the ones you should.*
Pine Script® 인디케이터
DeLeBlanc의
Price vs Moving Average Cross (Golden & Death Signals)This indicator detects price crossings against multiple moving averages, not crossings between moving averages themselves. 🔹 Core Concept A Golden Signal occurs when the price (close) crosses above a selected moving average. A Death Signal occurs when the price (close) crosses below a selected moving average. ⚠️ This is NOT a moving-average-to-moving-average crossover indicator. It is a price-to-moving-average crossover indicator. 📈 Moving Average Settings The indicator uses three independent moving averages, each configurable by the user: 1️⃣ Moving Average 1 (Golden Signal) Default: 20-period Type: EMA or SMA Signal: Price crossing above MA → Golden Signal 2️⃣ Moving Average 2 (Golden Signal) Default: 50-period Type: EMA or SMA Signal: Price crossing above MA → Golden Signal 3️⃣ Moving Average 3 (Death Signal) Default: 100-period Type: EMA or SMA Signal: Price crossing below MA → Death Signal 🔔 Signal Logic Signal Type Condition Golden Cross 1 Close price crosses above MA 1 Golden Cross 2 Close price crosses above MA 2 Death Cross Close price crosses below MA 3 Each signal is evaluated independently. 📊 Visual Representation Green Up Arrow → Price crosses above MA 1 Purple Up Arrow → Price crosses above MA 2 Red Down Arrow → Price crosses below MA 3 All moving averages are plotted directly on the price chart. 🎯 Practical Use Cases Identifying trend initiation points Confirming pullback breakouts Acting as an entry timing assistant Using MA 3 as a trend filter / exit warning ⚠️ Important Notes This indicator may generate false signals in sideways or ranging markets. Best used in combination with: Higher-timeframe trend confirmation Volume indicators Support & resistance levels 🧠 Summary ✔️ Price ↔ Moving Average crossover ❌ Moving Average ↔ Moving Average crossover This indicator is designed for trend-following traders who want clear and simple price confirmation signals. 원하시면 “True MA Golden Cross version” Scalping-optimized version (3m / 5m) Trend + Momentum filtered version
Pine Script® 인디케이터
hyeyo의
Daytrading Suite: Neon TPO + FVG v6.1Here is the summary of the code and the trading guide in English. --- ### 1. Code Summary: What does the chart show? The script combines three dimensions of trading into a single chart: * **The Context (TPO / Market Profile - Yesterday):** * **Gold Zone (Center):** Yesterday's **POC (Point of Control)**. This was the "fairest price". It often acts as a magnet. * **White Dashed Lines:** The **VAH (Value Area High)** and **VAL (Value Area Low)**. Yesterday, 70% of all trading volume happened between these lines. This is the area of "Balance". * **The Structure (HTF - 1 Hour+):** * **Red/Green Boxes (Right Edge):** Automatic **Supply & Demand Zones** based on the 1-hour chart (or your setting). They indicate major resistance and support levels. * **The Timing (Entries):** * **Neon FVG Boxes (Small):** "Fair Value Gaps". These represent imbalances in price. If price revisits these, it is often your **entry signal**. * **Lines (VWAP, EMA, PDH/PDL):** Act as dynamic support and trend indicators. --- ### 2. Trading Strategy: How to use it Do not just trade every colored spot. You must combine **Location (TPO)** with **Signal (FVG)**. #### Step A: The Open (Where are we?) In the morning (or at the US Open), check where the price is relative to the **white TPO lines**. 1. **Inside the White Lines (In Balance):** * The market is undecided. Expect ranging/choppy behavior. * **Strategy:** Buy at the bottom edge (VAL), Sell at the top edge (VAH). The target is often the Gold Zone (POC) in the middle. 2. **Outside the White Lines (Imbalance):** * The market is seeking new prices. Danger of a Trend! * **Strategy:** If price breaks above VAH and tests it from above -> **Long**. If it breaks below VAL -> **Short**. #### Step B: The Setup (The High Probability Scenario) Here is the "Rejection" Setup (Long Example): 1. Price drops to the lower white line (**VAL**) or into a green **Demand Zone**. 2. It bounces (shows a wick). 3. In the process, a small **green Neon FVG** is formed. 4. **Entry:** Limit Order at the top of the Neon FVG. 5. **Target:** The Gold Zone (POC) or the upper white line (VAH). 6. **Stop Loss:** Below the recent swing low. #### Step C: Warning Signals (When NOT to trade) * **In "No Man's Land":** If the price is sitting right in the middle between Gold (POC) and White (VAH/VAL), do nothing. The risk is 50/50. Wait until price hits an edge. * **Against the Flow:** If EMA 9 and 21 are pointing steeply downwards, do not buy blindly at the VAL just because the line is there. Wait for confirmation (FVG). ### Pre-Trade Checklist: 1. **Level:** Am I at a white line (VAH/VAL) or the Gold Zone (POC)? 2. **Structure:** Do I have an HTF Demand/Supply Zone backing me up? 3. **Trigger:** Do I see a Neon FVG pointing in my direction?
Pine Script® 인디케이터
socke1986의
1
Liquidity Sweep Sniper AP StyleAP Capital – Liquidity Sweep Sniper (Fab-Style) 📌 Overview This indicator is a precision scalping tool inspired by professional liquidity-based trading concepts often demonstrated by elite intraday scalpers. The script focuses on liquidity sweeps followed by strong displacement, aiming to capture short, high-probability momentum moves — particularly effective on lower timeframes (1–5 min) during active market sessions. It is not a signal spam tool. Signals appear only when multiple objective conditions align. 🧠 Core Concept Markets do not move randomly — they seek liquidity before expanding. This indicator identifies: Buy-side / Sell-side liquidity Liquidity sweeps (stop-hunts) Strong displacement candles reclaiming price Optional higher-timeframe trend alignment Only when all conditions are met does a signal print. 🔍 What the Indicator Detects 1️⃣ Liquidity Pools Equal highs or equal lows detected within a configurable lookback Minimum number of touches required ATR-based tolerance to adapt to volatility These levels represent areas where stop orders are likely resting. 2️⃣ Liquidity Sweep A valid sweep requires: Price to wick beyond the liquidity level Candle to close back inside the range This indicates failed breakout / stop-hunt behaviour. 3️⃣ Displacement Confirmation After the sweep, the candle must show: Strong body (default >60% of candle range) Candle range large relative to ATR Clear directional intent (momentum) This filters out weak reactions and chop. 4️⃣ Optional Trend Filter EMA-based higher-timeframe bias Helps align scalps with dominant direction Can be enabled or disabled 📈 Signals BUY: Sell-side liquidity sweep → bullish displacement SELL: Buy-side liquidity sweep → bearish displacement Signals are plotted directly on the chart and can be used with alerts. ⚙️ Recommended Usage Markets: XAUUSD, indices, liquid FX pairs Timeframes: 1m–5m Sessions: London & New York (best performance) Risk Management: Always required — this tool does not place trades Best used as a confirmation tool, not standalone. ⚠️ Important Notes This indicator is inspired by liquidity-based scalping concepts, not an exact replication of any individual trader’s private strategy. No indicator predicts the future — this tool highlights high-probability scenarios, not guarantees. Past performance is not indicative of future results.
Pine Script® 인디케이터
APCapitalTrading의
Bull/Bear vs Base vs Index (% Change Spread)Visualizes the performance gap ("Beta Decay") between 3x Leveraged ETFs (SOXL/SOXS) and their underlying sector (SOXX), relative to the S&P 500 (SPY). This indicator is designed for traders who trade leveraged products (like SOXL/SOXS, TQQQ/SQQQ) and need to see true relative strength beyond simple price action. It calculates the percentage change over a user-defined lookback period for four instruments: Base (1x): The sector benchmark (Default: SOXX). Bull (3x): The leveraged long ETF (Default: SOXL). Bear (-3x): The leveraged inverse ETF (Default: SOXS). Index: The broad market zero-line (Default: SPY). It then plots the Spread to reveal the health of the trend: Bull Spread (Green Line): Bull % - Base % Bear Spread (Red Line): Bear % - Base % Base vs Index (Filled Area): Base % - SPY % 🧠 The Logic: Why Use Spreads? In a perfectly efficient trending market, a 3x Bull ETF should move exactly 300% of the underlying asset. However, in choppy or volatile markets, volatility decay (beta slippage) causes leveraged ETFs to underperform mathematically. Positive Spread: The leveraged ETF is successfully capturing momentum (The "Sweet Spot"). Negative Spread: The leveraged ETF is suffering from drag or the underlying asset is chopping. 📈 Recommended Trading Plan Note: This indicator works best as a filter for entry conditions, not a standalone signal. Always use proper risk management. Strategy A: The "Clean Trend" (Momentum) Goal: Enter a 3x position only when volatility drag is minimal. 1. Bull Signal: Condition 1: The Base vs Index (Area) is Green (Sector is outperforming SPY). Condition 2: The Bull Spread (Green Line) is Positive (> 0). Why: This confirms the sector is strong AND the 3x ETF is amplifying that move efficiently without decay eating the profits. 2. Bear Signal: Condition 1: The Base vs Index (Area) is Red (Sector is lagging SPY). Condition 2: The Bear Spread (Red Line) is Positive (> 0). Why: This confirms the sector is crashing and the Bear ETF is successfully capturing the downside momentum. Strategy B: The "Decay Avoidance" (Cash is King) Goal: Avoid leveraged funds during chop. Condition: If BOTH the Bull Spread and Bear Spread are Negative (< 0) (below the zero line). Action: Stay in Cash or trade the 1x underlying (SOXX) only. Why: When both spreads are negative, it mathematically proves that the market is too choppy for leverage. Both the Long and Short leveraged funds are losing value relative to the underlying asset. Features: Pine Script® v6: Updated for the latest engine performance and visuals. Dashboard Table: Real-time percentage spreads displayed directly on the chart (customizable position). Fully Customizable: Works on any sector (e.g., set inputs to QQQ/TQQQ/SQQQ for Tech). Disclaimer: Trading leveraged ETFs involves significant risk. This script is for educational purposes only.
Pine Script® 인디케이터
heliav8r의
Day Color CandlesThe script uses TradingView’s built-in dayofweek value (where Monday = 1 and Sunday = 7) to detect the current bar’s weekday. For each weekday, a specific color is assigned — green for Monday, blue for Tuesday, purple for Wednesday, orange for Thursday, yellow for Friday, gray for Saturday, and red for Sunday. Instead of plotting new candles, the script uses barcolor() to recolor the existing chart candles. This avoids conflicts with TradingView’s rule that a script may contain only one main declaration. The price data remains unchanged — only the visual appearance of the candles is modified to help the user visually separate trading days.
Pine Script® 인디케이터
Pavel_Cheba의
CVD Divergence Background By HKOverview This indicator visualizes Delta Divergences (also known as Absorption) directly on your main chart. It highlights candles where the price direction contradicts the underlying net volume flow (CVD). This is a powerful method to spot "traps," limit order absorption, and potential reversals. How it Works The script calculates the Intrabar Volume Delta based on price action relative to the candle's range. It then compares this Delta with the candle's color (Open vs. Close). Bearish Divergence (Absorption Top): Scenario: The candle is GREEN (Price closed higher), but the Volume Delta is NEGATIVE (Net Selling). Visual: Red Background. Meaning: Sellers are aggressively absorbing the buying pressure via limit orders. Price struggled to rise despite the volume. Bullish Divergence (Absorption Bottom): Scenario: The candle is RED (Price closed lower), but the Volume Delta is POSITIVE (Net Buying). Visual: Green Background. Meaning: Buyers are aggressively absorbing the selling pressure via limit orders. Price struggled to fall despite the volume. Features Background Highlighting: Instantly spot divergences without checking a separate oscillator window. Seamless Integration: Works perfectly behind your price candles and other indicators (like Big Trade detectors). Customizable: You can adjust the colors and transparency to fit your chart theme. Use Case Use this to identify exhausted moves. If you see a green candle with a red background at a resistance level, it suggests that buyers are running into a wall of sellers, increasing the probability of a reversal.
Pine Script® 인디케이터
colacorn의
MGC1! Sniper Levels [NY Midnight + PDH/PDL + VWAP]This script, titled "MGC1! Sniper Levels ," is a specialized institutional-grade technical indicator designed for intraday trading on Micro Gold (MGC1!) futures. It merges Time & Price theory with Statistical Volatility to create a comprehensive roadmap for high-probability "Sniper" entries. Core Technical Components NY Midnight Pivot: Automatically identifies and plots the New York Midnight opening price. This level serves as the "True Open" for the daily session, helping traders determine whether the market is in a Premium or Discount zone relative to the daily start. Previous Day Structure (PDH/PDL): Displays the Previous Day’s High and Low using a background security call. These levels are primary targets for Liquidity Sweeps (trapping retail traders) before a reversal occurs. Advanced Session VWAP: Calculates the Volume Weighted Average Price starting from the session open. Unlike a standard moving average, VWAP represents the true fair value based on actual capital commitment. Standard Deviation Extensions (SD 1, 2, 3): Plots three layers of volatility bands based on the variance of price and volume. SD1 & SD2: Act as dynamic support and resistance within normal market conditions. SD3 (Extreme Zones): Highlights the "Extreme Long" and "Extreme Short" zones, representing areas where 99.7% of price action is statistically contained, often leading to sharp mean-reversion moves. Key Features & Interface Customizable Labels: Includes a specific toggle to show or hide Standard Deviation labels. This allows for a cleaner chart when focusing on ICT/SMC price action while maintaining the colored "Zones" for visual context. Real-Time Vignettes: High-contrast labels appear at the right edge of the price action, providing the exact numerical value of every key level (VWAP, PDH, NY Midnight) for immediate order execution. Previous VWAP Close: Plots the final VWAP value from the prior session. This level often acts as a magnetic "fair value" target during the current session's open. Strategic Trading Application The script is built for the Gold Sniper MGC1! persona to identify "Smart Money" reversals. A typical setup involves waiting for price to reach an SD3 Extreme Zone that coincides with the PDH or PDL. Once the price "sweeps" these levels and shows a Market Structure Shift (MSS) back toward the VWAP, a high-probability trade is triggered.
Pine Script® 인디케이터
caktrading의
alplerThe 4H Engulf Indicator is a rule-based price action tool designed to identify high-probability trading opportunities on the 4-hour timeframe. Its core logic is built around bullish and bearish engulfing candles, which are widely accepted as strong reversal or continuation signals in technical analysis. This indicator focuses only on confirmed engulfing patterns, meaning the signal is generated after the candle is fully closed, not while it is forming. This helps eliminate false signals and emotional, premature entries. When a bullish engulfing candle appears, the indicator marks a bullish signal, suggesting potential upward momentum. Conversely, when a bearish engulfing candle forms, a bearish signal is displayed, indicating possible downward pressure. One of the key strengths of the 4H Engulf Indicator is its clarity and simplicity. Signals are shown directly on the chart using visually clear arrows and labels, allowing the trader to quickly assess market direction without clutter. The indicator does not predict the market; instead, it reacts to confirmed price behavior, which aligns well with disciplined and systematic trading. The 4-hour timeframe provides a balance between noise reduction and timely opportunities, making this indicator suitable for swing traders and position traders. When combined with trend filters, risk management rules, or higher-timeframe analysis, the 4H Engulf Indicator becomes a powerful component of a professional trading system.
Pine Script® 인디케이터
TLUSD의
Position Calculator--- # Position Calculator Calculates the optimal position size with a fixed profit/loss ratio based on opening, stop-loss, and take-profit levels. Determines the direction of the position based on the opening and stop-loss settings. Initial use requires manual setting of opening, take-profit, and stop-loss. Afterward, you can manually drag the price line to set values ​​and the system will automatically calculate position information. --- # 仓位计算器 通过开仓、止损、止盈计算固定盈亏比适合的开仓数量，根据开仓和止损判断开仓方向。 首次使用需要手动设置开仓、止盈、止损，之后可以手动拖拽价格线设置值然后自动计算仓位信息。
Pine Script® 인디케이터
v50me의
ODTE Layman Signals 📌 Script Name Layman Options Signals – Structured BUY CALL / BUY PUT with SL & TP 📖 Overview This indicator is a complete, finished intraday trading system designed to simplify options trading (including 0DTE and weekly options) by converting price action and market structure into clear, actionable signals. The script performs all analysis in the background and displays only what the trader needs to execute consistently: BUY CALL or BUY PUT Predefined Stop Loss (SL) Two Take Profit levels (TP1 and TP2) Trade status and levels displayed in a live status box The focus of this tool is execution discipline, not prediction. 🧠 Core Concepts Used (What Makes This Script Original) This script combines multiple price-action concepts into a single, rule-based framework: 1️⃣ Opening Range Breakout (ORB) The script calculates the opening range high and low using the first X minutes of the regular session. Trades are only allowed above ORB high for CALLs and below ORB low for PUTs. This filters low-quality trades during early chop. 2️⃣ Market Structure Confirmation CALL trades require higher highs and higher lows PUT trades require lower lows and lower highs This prevents trading against structure. 3️⃣ Retest & Liquidity Sweep Validation Breakouts are validated using: ORB retests (price accepts above/below the range) Liquidity sweeps (false breakouts that trap traders) This helps reduce fake breakouts. 4️⃣ Volatility-Aware Risk Management Stop losses are placed using market structure + ATR buffer This avoids stops being placed at obvious levels. 5️⃣ Multi-Target Trade Management TP1 = partial profit (risk reduction) TP2 = runner target (trend continuation) After TP1, stop loss can move to breakeven (optional) 6️⃣ Discipline Controls Only one active trade at a time Cooldown period after a stop loss Prevents over-trading and revenge trading 📊 What the Indicator Displays The script plots the following directly on the chart: Entry level Stop Loss (SL) Take Profit 1 (TP1) Take Profit 2 (TP2) Opening Range High & Low It also includes a Status Box that always shows one of the following states: WAIT BUY CALL BUY PUT IN TRADE COOLDOWN This allows traders to understand the current state at a glance without reading code. ▶️ How to Use the Indicator Recommended Timeframes 1-minute or 2-minute charts Intraday use only Entry Rules When BUY CALL appears → Buy an ATM or slightly ITM call When BUY PUT appears → Buy an ATM or slightly ITM put Risk Management Exit immediately if price hits the SL line Take partial profits at TP1 Hold remaining position for TP2 if conditions allow When Status Shows WAIT or COOLDOWN No trade should be taken ⚙️ Recommended Instruments SPY / QQQ Liquid large-cap stocks Intraday options (0DTE / weeklies) ⚠️ Important Disclaimer This script is provided for educational purposes only. It is not financial advice It does not guarantee profits It does not place trades automatically Options trading involves significant risk Always test using paper trading or small size before live use. 🎯 Who This Script Is For ✔ Traders who want clear rules ✔ Traders who prefer price action over indicators ✔ Options traders who value risk management ✔ Users who want less chart clutter and more discipline ❌ Not intended for swing trading ❌ Not intended for automated trading systems 🧩 Final Notes This is a complete, finished indicator, not a test or experimental script. All logic is deterministic, non-repainting, and designed for real-time use. The philosophy behind this tool is simple: Good trading comes from structure, discipline, and risk control — not prediction.
Pine Script® 인디케이터
MS_MoneyMachine의
Market Phase Dashboard MTFGetting into a trade is the easy part. if anyone out there could use a little assistance in knowing when to exit a trade this ones for you.. This is a Market Phase Dashboard MTF (Multi-Timeframe) that classifies market conditions into 4 distinct phases based on trend + momentum alignment. Here's what it does: The 4 Market Phases: CONTINUATION 🟢 - Uptrend (EMA rising) + Strong momentum (RSI > 55) Translation: "Trend is strong, keep riding it" SLOWING 🟠 - Two scenarios: Uptrend but momentum fading (RSI ≤ 55), OR Downtrend but momentum not fully committed (RSI ≥ 45) Translation: "Trend losing steam, be cautious" EXHAUSTION 🔴 - Downtrend (EMA falling) + Weak momentum (RSI < 45) Translation: "Trend is dying, possible reversal coming" NEUTRAL ⚪ - Anything that doesn't fit above (shouldn't happen much with these thresholds) Multi-Timeframe View: Shows phases for: Chart TF - Whatever timeframe you're viewing (only updates on confirmed bar close) 5m - Always shows 5-minute phase 15m - Always shows 15-minute phase Visual Cues: Background color changes based on the live chart timeframe phase (updates in real-time, not waiting for bar close) Table shows confirmed phases for all timeframes Practical Use: Helps you understand if different timeframes are aligned. For example: All 3 showing CONTINUATION = strong aligned trend, high confidence trades 15m EXHAUSTION but 5m CONTINUATION = possible short-term bounce in downtrend Mixed signals = choppy/transitional market, stay cautious It's basically a trend health checker across multiple timeframes at a glance! I am also in the works of adding every higher time frame so that it will consist of 5 min all the way to the 12 mo time frame i will keep you guys updated as i update this indicator.
Pine Script® 인디케이터
wateriskey6689의
Candles by Day of WeekCandles by Day of Week Candles by Day of Week (INLINE) is a lightweight visual indicator that colors price candles based on the day of the week. It helps traders quickly recognize weekly patterns, market behavior differences, and day-specific tendencies directly on the chart. 🔹 Key Features Candle coloring for Monday through Sunday Enable or disable each weekday individually Custom color selection for every day Day enable toggle and color input are combined in one line for cleaner settings Uses barcolor() — no candle shifting or overlay issues Compatible with all markets: Forex, Crypto, Stocks, Indices Works on all timeframes 🔹 How It Works The indicator detects the day of the week for each candle and applies the selected color if that day is enabled. Disabled days keep the chart’s default candle colors unchanged. This approach ensures: No interference with price data No displacement from the main chart Full compatibility with other indicators 🔹 Practical Use Analyze weekday-based market behavior Spot recurring patterns or volatility by day Improve discretionary and session-based strategies Enhance chart readability and visual clarity 🔹 Notes Saturday and Sunday candles are mainly relevant for Crypto markets Forex traders may choose to disable weekend days The indicator is purely visual and does not affect calculations or signals 🔹 Customization All settings can be adjusted in the indicator’s Inputs: Toggle individual days on or off Select custom candle colors per day Instantly adapt the indicator to your trading style 🔹 Disclaimer This indicator is intended for visual analysis only and should be used as a supportive tool alongside other forms of technical analysis. It does not provide buy or sell signals.
Pine Script® 인디케이터
ColyaTr의