지금 시작

Breakouts

Fishing The Trend - SetupFishing The Trend - Setup HOW Does it work ? The name itself says we must have a trading setup for ease of trading for getting the most from the market. i.e. Combining the most useful indicator under one roof... Fishing The Trend - Setup have following ::- 1) IntraDay Range. 2) Four Friends. 3) Fishing The Trend. 4) Multi Time Frame - Custom VWAP. 5) RSI based SMA. 1) Intraday Range HOW Does it work ? For calculating the average most probable range for any plotted security, it plots 2 bands higher band and a lower band for a particular range using the default ADR. This indicator is on - as default. # Upper and Lower band act as support and resistance , user may see a reversal in trend from these bands # If the price breaks these bands, don't take a trade expecting a reversal # These bands are calculated by averaging the previous x number of days' highs and lows of the security. 2) Four Friends HOW Does it work ? Plotting different EMA for finding the direction of Trend / Market, There are actually 5 EMAs- F1 = 20 EMA, F2 = 50 EMA, F3 = 100EMA, F4= 150, and Trend = 200-EMA. Usually 200 EMA is used to find the trend of market whether bearish / bullish, if market is above 200 ema than we may say its bullish and below 200 ema its bearish. The 50 EMA and 100 EMA works as best pullbacks in the trending market, user can configure as per his trading style and method. This indicator can be changed to multi timeframe as required. User can plot lower time frame data onto higher time or vice-versa for finding better opportunities for early trend detection, also the user have the option to use feature of non-repainting or vice versa. The default Color MA option is un=ticked, means plotting 5 different color EMAs, If the user ticks this feature, the whole 5 EMA color will change into red or orange as per direction of closing candle, user can change color as per his / her color combination. Default plotting time is of 1 min. This second indicator is off by default - user have to tick-it to activate it 3) Fishing The Trend HOW Does it work ? The code uses dynamic current levels to identify trend, This indicator is using SuperTrend, ATR and relatively Smoothened ATR for early trend reversal detection to determine the trend and direction so that a fruitful decision can be made. To Indicate the strength of the trendline, The standard calculations of SuperTrend, along with multiple smoothen ATR results are clubbed determine the direction, a step ahead. However, the indicator is not appropriate for all the situations. It works when the market is trending. Hence it is best to use for short-term technical analysis . SuperTrend uses only the two parameters of ATR and multiplier which are not sufficient under certain conditions to predict the accurate direction of the market. Here in this indicator ATR value is not editable and after long backtests the best ATR value is kept that helps the indicator working very well. The default setting is best for use, but user can customize the Multiplier for his own fine tunings, So once the Levels are matched, a Long / Short suggestion is plotted. Best Time Frames to use : starting from 1, 3, 5, 15, 30 Mins and so on... to determine Trend. Long = L and Short = S. Where and how to use? The main use of this indicator is quick scalping and Intra-day trading. The Indicator shows the option to show Long/Short Signals which the use can be turned on or off. The indicator shows a very useful option for early detection of the ongoing trend whether there will be reversal of trend or not ? Stop Loss - That should be done by following ones risk appetite, Ideally the High of the Previous Candle should be the stop loss for the Long / Short but everyone has their own Risk Management Strategies based on the capital deployed. by default this comes on.. 4) Multi Time Frame - Custom VWAP. HOW Does it work ? VWAP = The volume weighted average price (VWAP) is a trading benchmark used by traders that gives the average price a security has traded at throughout the day, based on both volume and price. It is important because it provides traders with insight into both the trend and value of a security. This indicator is programmed for using vwap for spot indices / securities not having volume calculations but have futures, specially banknifty and nifty of Indian markets. User has option to change the plotting timeframe as per his requirements for checking the trend under vwap or over vwap. The user have to type the equivalent script symbol in the space provided to calculate the vwap of that particular security and plot on the non-volume script. Seems confusing !!!! have a look at example.. eg. - if you have chart of banknifty spot and u want to place vwap on in then just write security name in the blank field banknifty future of continuous contract running month " BANKNIFTY1! " Futures Chart... that's it and u will have futures vwap plotting on spot chart... this can give user a definite idea about the vwap line. User have option to change color of bar and change color of the vwap line which is plotted. By default this comes off.. Note = This indicator changes bar color 5) RSI based SMA HOW Does it work ? # This indicator is for user using RSI, The twist is that not only it uses RSI but also simple moving average, So this makes the user more safe as it is a combination of RSI and SMA. # Multi-colored ----> Green/Red/Yellow user can change ..moving average of choice # user can change overbought / over sold values of RSI as required. The time frame here is fixed. * There is an On/Off Option for each Indicator. Disclaimer : There could be scenarios when the candle is shown as a long or short and then the candle turns into opposite direction red/green. In such scenarios , Please refer to the just preceding candle and the early detection signal and if this candle is moving into positive direction only then go for long, Similarly opposite for Short, the value of multiplier 1.0 is determined using series of back test across various assets with different time frames. User Options : Choice of turning on / off the Long / Short Labels and early detection/StopLoss Option can also be activated or deactivated. Visual Checks - The user could manually validate the back test results on various assets they would like to use this strategy on before putting it live. Usage/Markets : Index Trading / Equities and also well with Commodities and Currencies How to get access Please click on the link / email available in the signature or send me a private message to get access. Feedback Please click on the link/email in the signature or send me a private message for suggestions/feedbacks.
Pine Script™ 인디케이터
GrowMore_Indicators의
26
TradeChartist Tracker™𝗧𝗿𝗮𝗱𝗲𝗖𝗵𝗮𝗿𝘁𝗶𝘀𝘁 𝗧𝗿𝗮𝗰𝗸𝗲𝗿 is an essential real-time multi Indicator tracking toolkit that can be plotted as a standalone Indicator plot, a multi symbol tracker/screener for upto 10 different symbols and a visual scorecard for upto 5 different symbols. The indicators included in the tracker are Stochastic Oscillator, RSI, CCI, 15 different Moving Averages, MACD, Bollinger Bands %B (including Bollinger Bands and Breakout Signals), Ichimoku Cloud (including Breakout signals), Donchian Channels Oscillator (including Donchian Channels and Breakout Signals), Net Volume and Heikin Ashi Trend. =================================================================================================================== ™𝗧𝗿𝗮𝗱𝗲𝗖𝗵𝗮𝗿𝘁𝗶𝘀𝘁 𝗧𝗿𝗮𝗰𝗸𝗲𝗿 𝗨𝘀𝗲𝗿 𝗠𝗮𝗻𝘂𝗮𝗹 ===================================== ™TradeChartist Tracker Plot Types ============================== 1. Indicator plot of Chart Symbol on its own , chosen from the 𝗜𝗻𝗱𝗶𝗰𝗮𝘁𝗼𝗿 𝗧𝘆𝗽𝗲 dropdown, enabling 𝐃𝐢𝐬𝐩𝐥𝐚𝐲 𝐈𝐧𝐝𝐢𝐜𝐚𝐭𝐨𝐫 𝐏𝐥𝐨𝐭 (𝐝𝐢𝐬𝐚𝐛𝐥𝐞𝐬 𝐓𝐫𝐚𝐜𝐤𝐞𝐫/𝐒𝐜𝐨𝐫𝐞𝐜𝐚𝐫𝐝). In this example Daily chart of XRP-USDT, 55 period Stochastic is tracked for the chart symbol XRP-USDT. 2. Indicator plot of a Symbol different from the Chart Symbol , chosen from the 𝗜𝗻𝗱𝗶𝗰𝗮𝘁𝗼𝗿 𝗧𝘆𝗽𝗲 dropdown by enabling Tʀᴀᴄᴋ ᴀɴᴏᴛʜᴇʀ Sʏᴍʙᴏʟ's Iɴᴅɪᴄᴀᴛᴏʀ and entering the symbol name in the Sʏᴍʙᴏʟ ᴛᴏ Tʀᴀᴄᴋ input box, whilst keeping 𝐃𝐢𝐬𝐩𝐥𝐚𝐲 𝐈𝐧𝐝𝐢𝐜𝐚𝐭𝐨𝐫 𝐏𝐥𝐨𝐭 (𝐝𝐢𝐬𝐚𝐛𝐥𝐞𝐬 𝐓𝐫𝐚𝐜𝐤𝐞𝐫/𝐒𝐜𝐨𝐫𝐞𝐜𝐚𝐫𝐝) enabled. In this example Daily chart of XRP-USDT, 55 period Stochastic is tracked for the BTC-USD (different from chart symbol XRP-USDT). 3. Tracker Plot of up to 10 Multiple Symbol Trackers for the Indicator chosen from the 𝗜𝗻𝗱𝗶𝗰𝗮𝘁𝗼𝗿 𝗧𝘆𝗽𝗲 dropdown, by disabling 𝐃𝐢𝐬𝐩𝐥𝐚𝐲 𝐈𝐧𝐝𝐢𝐜𝐚𝐭𝐨𝐫 𝐏𝐥𝐨𝐭 (𝐝𝐢𝐬𝐚𝐛𝐥𝐞𝐬 𝐓𝐫𝐚𝐜𝐤𝐞𝐫/𝐒𝐜𝐨𝐫𝐞𝐜𝐚𝐫𝐝) and by entering the number of trackers required in the 𝐍𝐮𝐦𝐛𝐞𝐫 𝐨𝐟 𝐓𝐫𝐚𝐜𝐤𝐞𝐫𝐬 input box under 𝗧𝗿𝗮𝗰𝗸𝗲𝗿 𝗣𝗹𝗼𝘁𝘀 section. Upto 10 Symbols can be tracked and can be input by the user in the input boxes from Sʏᴍʙᴏʟ 1,...Sʏᴍʙᴏʟ 10 . 𝐃𝐢𝐬𝐩𝐥𝐚𝐲 𝐈𝐧𝐝𝐢𝐜𝐚𝐭𝐨𝐫 𝐏𝐥𝐨𝐭 (𝐝𝐢𝐬𝐚𝐛𝐥𝐞𝐬 𝐓𝐫𝐚𝐜𝐤𝐞𝐫/𝐒𝐜𝐨𝐫𝐞𝐜𝐚𝐫𝐝) must be disabled for this plot type. In this example Daily chart of Crypto Total Market Cap, Bollinger Bands %B is tracked for the chart symbol + 10 other Crypto symbols using Multi Symbol Trackers 4. Visual Scorecards of up to 5 Symbols for 8 indicators (all except Net Volume and HA Trend) can be plotted with real-time data by enabling 𝗗𝗶𝘀𝗽𝗹𝗮𝘆 𝗩𝗶𝘀𝘂𝗮𝗹 𝗦𝗰𝗼𝗿𝗲𝗰𝗮𝗿𝗱 - (𝟓 𝐓𝐫𝐚𝐜𝐤𝐞𝐫𝐬 𝐋𝐢𝐦𝐢𝐭). 𝐃𝐢𝐬𝐩𝐥𝐚𝐲 𝐈𝐧𝐝𝐢𝐜𝐚𝐭𝐨𝐫 𝐏𝐥𝐨𝐭 (𝐝𝐢𝐬𝐚𝐛𝐥𝐞𝐬 𝐓𝐫𝐚𝐜𝐤𝐞𝐫/𝐒𝐜𝐨𝐫𝐞𝐜𝐚𝐫𝐝) must be disabled for this plot type. For the same example Daily chart of Crypto Total Market Cap as above, Visual Scorecard is plotted for 5 Symbols as shown. 5. Indicator Tracker labels can be plotted on Price chart by overlaying the Tracker on main chart and by switching from Separate Tracker Pane - Default to Tracker Labels only on Price Scale in the Lᴀʙᴇʟs Dɪsᴘʟᴀʏ Tʏᴘᴇ dropdown box. In this example chart of 1hr XLM-USDT, Tracker labels of 55 EMA are plotted for 10 different symbols along with the 55 EMA plot of XLM-USDT. Indicator plot that doesn't fit on price scale can be visualised using a second Tracker added to chart as shown in the ETH-USDT example below tracking Net Volume. =================================================================================================================== 𝗜𝗻𝗱𝗶𝗰𝗮𝘁𝗼𝗿𝘀 𝗜𝗻𝗰𝗹𝘂𝗱𝗲𝗱 𝗶𝗻 ™𝗧𝗿𝗮𝗱𝗲𝗖𝗵𝗮𝗿𝘁𝗶𝘀𝘁 𝗧𝗿𝗮𝗰𝗸𝗲𝗿 ============================================== 1. Stochastic Oscillator 2. RSI 3. CCI 4. MA - (15 types included) 5. MACD 6. Bollinger Bands %B + Optional plots of Bollinger Bands and Breakout Signals 7. Ichimoku Cloud Oscillator + Optional plots of Ichimoku Cloud and Breakout Signals 8. Donchian Channels + Optional plots of Donchian Channels and Breakout Signals 9. Net Volume 10. Heikin Ashi Trend All of the above indicators can be plotted as independent plots of the Chart Symbol or of a different symbol by enabling 𝐃𝐢𝐬𝐩𝐥𝐚𝐲 𝐈𝐧𝐝𝐢𝐜𝐚𝐭𝐨𝐫 𝐏𝐥𝐨𝐭 (𝐝𝐢𝐬𝐚𝐛𝐥𝐞𝐬 𝐓𝐫𝐚𝐜𝐤𝐞𝐫/𝐒𝐜𝐨𝐫𝐞𝐜𝐚𝐫𝐝). Some Oscillators have the option of Pʟᴏᴛ Sᴛʏʟᴇ under their relevant sections, and can be plotted as line, area or a histogram. Oscillators 1-8 (except 4) require source price, lookback length and smoothing (where available) for the indicator plot. The colour of the tracker blocks is based on the Upper/Lower bands (where available), specified by the user in the respective sections. For example, if the RSI indicator is chosen to be plotted with Upper band at 60 and Lower band at 40, the tracker blocks and the Indicator plot paint the values between 40 and 60 in neutral colour which can be changed from the settings. Multi Window BTC-USDT 1hr example chart below with various indicators from ™TradeChartist Tracker. Note: The tracker colour is exactly colour of the Indicator Plot. The Visual Scorecard , however uses the mid values and doesn't take into account the bands specified by the user. For example, RSI score is green on the Visual Scorecard as long as RSI is above 50 and doesn't get affected by the user specified upper/lower band and this applies to all Oscillators. This is shown in the 1hr BTC-USDT chart below. Moving Averages (MA) and MACD ------------------------------------------------------ Tracker plots and tracks one of 15 Moving Averages that can be chosen from the MA ᴛʏᴘᴇ and by specifying the MA Lᴇɴɢᴛʜ . MACD uses EMA as default for calculating the MACD plots and Tracker data using Fᴀsᴛ Lᴇɴɢᴛʜ , Sʟᴏᴡ Lᴇɴɢᴛʜ and Sᴍᴏᴏᴛʜɪɴɢ . To experiment or use a different Moving Average to calculate MACD, disable 𝐔𝐬𝐞 𝐄𝐌𝐀 (Uɴᴄʜᴇᴄᴋ ᴛᴏ ᴜsᴇ MA ғʀᴏᴍ ᴀʙᴏᴠᴇ) and select the required Moving Average from MA ᴛʏᴘᴇ drop down of the 𝟰. 𝗠𝗼𝘃𝗶𝗻𝗴 𝗔𝘃𝗲𝗿𝗮𝗴𝗲 section. Bollinger Bands %B + Optional plots of Bollinger Bands and Breakout Signals --------------------------------------------------------------------------------------------------------------------------- Bollinger Bands %B is a companion oscillator for Bollinger Bands and helps depict where the price is, in relation to the Bollinger Bands. To plot the actual Bollinger Bands, enable Dɪsᴘʟᴀʏ Bᴏʟʟɪɴɢᴇʀ Bᴀɴᴅs and to plot the Bollinger Bands Breakout Signals, enable Sʜᴏᴡ BB Bʀᴇᴀᴋᴏᴜᴛ Sɪɢɴᴀʟs , with 𝐃𝐢𝐬𝐩𝐥𝐚𝐲 𝐈𝐧𝐝𝐢𝐜𝐚𝐭𝐨𝐫 𝐏𝐥𝐨𝐭 (𝐝𝐢𝐬𝐚𝐛𝐥𝐞𝐬 𝐓𝐫𝐚𝐜𝐤𝐞𝐫/𝐒𝐜𝐨𝐫𝐞𝐜𝐚𝐫𝐝) enabled. Ichimoku Cloud Oscillator + Optional plots of Ichimoku Cloud and Breakout Signals ------------------------------------------------------------------------------------------------------------------------------------ Ichimoku Cloud Oscillator helps visualize the current price in relation to the breakout support/resistance of the Ichimoku Cloud using strict Ichimoku Cloud criteria (including Chikou Span agreeing with the breakout etc.). To plot the actual Ichimoku Cloud, enable Dɪsᴘʟᴀʏ Iᴄʜɪᴍᴏᴋᴜ Cʟᴏᴜᴅ and to plot the Kumo Breakout Signals, enable Sʜᴏᴡ Kᴜᴍᴏ Bʀᴇᴀᴋᴏᴜᴛ Sɪɢɴᴀʟs , with 𝐃𝐢𝐬𝐩𝐥𝐚𝐲 𝐈𝐧𝐝𝐢𝐜𝐚𝐭𝐨𝐫 𝐏𝐥𝐨𝐭 (𝐝𝐢𝐬𝐚𝐛𝐥𝐞𝐬 𝐓𝐫𝐚𝐜𝐤𝐞𝐫/𝐒𝐜𝐨𝐫𝐞𝐜𝐚𝐫𝐝) enabled. Cloud Settings form the fundamental factor for this indicator to detect the breakouts. The settings for the Ichimoku Cloud is Automatic (detects right settings for the symbol type) by default, but this can be changed to Classic or 24/7 Crypto , based on the user preference from the settings under 𝐂𝐥𝐨𝐮𝐝 𝐓𝐲𝐩𝐞, which also includes a manual input option. Ichimoku traders can experiment different settings combinations under manual settings to suit their trading frequency and timeframe traded. Donchian Channels + Optional plots of Donchian Channels and Breakout Signals ------------------------------------------------------------------------------------------------------------------------------- Donchian Channels comprises of three plots - a upper band, a lower band and a mean line (or mid line of the channel). The upper band is based on highest high of N periods specified by the user and the lower band is based on the lowest low of N periods specified by the user. These channels help spot price breaching high or low of last N periods clearly, thereby aiding the trader to understand the price action of any symbol better on any given timeframe. Donchian Channels Oscillator helps visualize the current price in relation to the Mean line of the Donchian Channels of user specified lookback period (specified in the Dᴏɴᴄʜɪᴀɴ Cʜᴀɴɴᴇʟ Lᴇɴɢᴛʜ input box). The sensitivity of the oscillator can be adjusted using smoothing factor in the Sᴍᴏᴏᴛʜɪɴɢ input box. To plot the actual Donchian Channels, enable Dɪsᴘʟᴀʏ Dᴏɴᴄʜɪᴀɴ Cʜᴀɴɴᴇʟs and to plot the Donchian Channels Breakout Signals, enable Sʜᴏᴡ DC Bʀᴇᴀᴋᴏᴜᴛ Sɪɢɴᴀʟs , with 𝐃𝐢𝐬𝐩𝐥𝐚𝐲 𝐈𝐧𝐝𝐢𝐜𝐚𝐭𝐨𝐫 𝐏𝐥𝐨𝐭 (𝐝𝐢𝐬𝐚𝐛𝐥𝐞𝐬 𝐓𝐫𝐚𝐜𝐤𝐞𝐫/𝐒𝐜𝐨𝐫𝐞𝐜𝐚𝐫𝐝) enabled. Note: Using smoothing factor more than 1 doesn't reflect the actual Donchian Channels Mean line and also impacts the Tracker block colours. Net Volume and Heikin Ashi Trend ------------------------------------------------------- Net Volume and Heikin Ashi Trend can be tracked and plotted for up to 10 symbols in addition to the chart symbol, but both Net Volume and Heikin Ashi Trend are not included in the Visual Scorecard. Since the colour of the Net Volume depends on candle being bullish or bearish, it can help the user visualize if the current candle close of the symbol tracked is above or below the symbols's candle open. Note: Bar Replay doesn't update the bar by bar indicator plot for historic bars for symbols other than the chart symbol. However, the Indicator Plot is perfectly usable for the realtime bar as data updates for both the Trackers and the Scorecard in realtime. =================================================================================================================== 𝗩𝗶𝘀𝘂𝗮𝗹 𝗦𝗰𝗼𝗿𝗲𝗰𝗮𝗿𝗱 ================= Visual Scorecard plots a green Bull or a red Bear Score colour plot for each Indicator from RSI to Donchian Channels Oscillator against every symbol tracked for up to 5 symbols max (First 5 symbols under 𝗧𝗿𝗮𝗰𝗸𝗲𝗿 𝗣𝗹𝗼𝘁𝘀 section). The gap between the scores can be adjusted using gap factor under Gᴀᴘ Fᴀᴄᴛᴏʀ ʙᴇᴛᴡᴇᴇɴ Sᴄᴏʀᴇs dropdown. Visual Scorecard scoring method ---------------------------------------------------- RSI > 50 - 🟢 RSI < 50 - 🔴 Stoch > 50 - 🟢 Stoch < 50 - 🔴 CCI > 0 - 🟢 CCI < 0 - 🔴 Close price above MA plot - 🟢 Close price below MA plot - 🔴 MACD > 0 - 🟢 MACD < 0 - 🔴 Bollinger Bands %B > 50 - 🟢 Bollinger Bands %B < 50 - 🔴 Ichimoku Bullish Kumo Trend - 🟢 Ichimoku Bearish Kumo Trend - 🔴 Donchian Channels Oscillator > 0 (or close price above DC Mean Line) - 🟢 Donchian Channels Oscillator < 0 (or close price below DC Mean Line) - 🔴 Note: Bar Replay doesn't update the bar by bar scores/tracker data for historic bars for symbols other than the chart symbol. However, the Scorecard is perfectly usable for the realtime bar as data updates for both the Trackers and the Scorecard in realtime. =================================================================================================================== 𝗠𝘂𝗹𝘁𝗶 𝗦𝘆𝗺𝗯𝗼𝗹 𝗧𝗿𝗮𝗰𝗸𝗲𝗿𝘀/𝗟𝗮𝗯𝗲𝗹𝘀 ============================= Multi Symbol Tracker blocks continuously track the real-time indicator data of up to 10 symbols (in addition to the chart symbol) based on the number of Symbol Trackers preferred in the 𝐍𝐮𝐦𝐛𝐞𝐫 𝐨𝐟 𝐒𝐲𝐦𝐛𝐨𝐥 𝐓𝐫𝐚𝐜𝐤𝐞𝐫𝐬 (𝟎-𝟏𝟎) input box under the 𝗧𝗿𝗮𝗰𝗸𝗲𝗿 𝗣𝗹𝗼𝘁𝘀 section, and plots Bull, Bear and Neutral colour coded blocks based on both the indicator selected and settings preferred by the user under the relevant indicator section. Multi Symbol Tracker Labels also continuously track the real-time indicator data in addition to the last close price (if 𝐒𝐡𝐨𝐰 𝐏𝐫𝐢𝐜𝐞 is enabled under 𝗧𝗿𝗮𝗰𝗸𝗲𝗿 𝗣𝗹𝗼𝘁𝘀 section), which helps user see the real-time changes in the indicator values and price changes of the symbols tracked. The Tracker Label colours are exactly the same as the Tracker Block colours and are filtered based on the user preferred bands on the Oscillator values. This is slightly different to the Visual Scorecard Colour coding as the range between the user preferred bands is colour coded in a neutral colour, whereas the Scorecard uses only Bull and Bear Colours as explained in the 𝗩𝗶𝘀𝘂𝗮𝗹 𝗦𝗰𝗼𝗿𝗲𝗰𝗮𝗿𝗱 heading above. For example, if the user prefers RSI upper band of 60 and lower band of 40, the range between the values of 40 and 60 will be colour coded in neutral colour which can be changed from the 𝗨𝘀𝗲𝗳𝘂𝗹 𝗘𝘅𝘁𝗿𝗮𝘀 section of the indicator settings. Note 1: Default settings are based on the Oscillator mid values and hence the Tracker Blocks match with the Visual Scorecard colour codes. Using Upper and Lower bands for oscillators help spot the oversold and overbought zones and also helps spot breakout threshold based on Indicator values specified by the user. Example chart with visual depiction below using RSI. Note 2: Bar Replay doesn't update the bar by bar scores/tracker data for historic bars for symbols other than the chart symbol. However, the Tracker blocks/labels are perfectly usable for the realtime bar as data updates for both the Trackers and the Scorecard in realtime. =================================================================================================================== Frequently Asked Questions ======================== Q: When I load the ™TradeChartist Tracker, why are the values in the labels blurred sometimes? A: This happens occasionally as shown in the chart below, when the script is loaded for the first time or when a different setting is used. To resolve this, just hide and unhide the script using the 👁 next to the Indicator title. If it is not visible, just hover the mouse/crosshair over the Indicator Title and it will be visible. Q: Why does the indicator plot, tracker blocks and labels of Symbols being tracked, not update when I use Bar Replay? A: As explained in the relevant sections above, historic data for bars and indicators other than chart symbol doesn't update on bar replay. But the chart symbol data does update for every bar on bar replay. This doesn't affect the real-time values and block colours for the symbols tracked. Q: Can I track real-time values of a currently trading symbol when I'm on a symbol chart that is inactive? For example, can I see labels with real-time BTC values on a Sunday when I'm on a SPX chart when its not in session? A: Simple answer is no. This is because, the plots are based on bar times of the chart and the symbols are tracked based on the bar time. So if the SPX session ended on Friday, the last known value of the BTC labels will be from Friday and hence it is always recommended to track symbols from a symbol chart that is in session. Q: Does ™TradeChartist Tracker repaint? A: This indicator doesn't repaint but it is not recommended to trade a different symbol from the chart based on the real-time data alone without checking if the current symbol chart is in session as inactive price chart will not have updated data on symbols tracked. Also, bar replay doesn't work on data pulled from external symbol data than the chart symbol, but signals confirmed at candle close and confirmed by Tracker blocks with appropriate colour code will be in agreement with the respective indicator and can be double checked for building trust and confidence on the indicator. Q: Can ™TradeChartist Tracker be connected to other indicators as external source? A: Yes. ™TradeChartist Tracker can be connected to another script and there are several use cases in doing so. A couple of examples are shown below. 1. ™TradeChartist Tracker 's Bollinger Bands %B 𝗜𝗻𝗱𝗶𝗰𝗮𝘁𝗼𝗿 𝗣𝗹𝗼𝘁 connected to ™TradeChartist Plotter to plot Divergences on the 4hr XAU-USD main price chart. 2. ™TradeChartist Tracker 's 𝐁𝐫𝐞𝐚𝐤𝐨𝐮𝐭 𝐓𝐫𝐞𝐧𝐝 𝐈𝐝𝐞𝐧𝐭𝐢𝐟𝐢𝐞𝐫 connected to ™TradeChartist Plug and Trade as Oscillatory Signal with 0/0 to generate trade signals with Targets and performance information on trades. More Example Charts ================== =================================================================================================================== Best Practice: Test with different settings first using Paper Trades before trading with real money =================================================================================================================== This is not a free to use indicator. Get in touch with me (PM me directly if you would like trial access to test the indicator) Premium Scripts - Trial access and Information Trial access offered on all Premium scripts. PM me directly to request trial access to the scripts or for more information. ===================================================================================================================
Pine Script™ 인디케이터
TradeChartist의
19
Support and Resistance Levels with Breaks [LuxAlgo]This script provides basic pivot point Support and Resistance Levels to the user whilst displaying Break signal tags. It also has the ability to let the user display more significant breaks by filtering using the Volume Oscillator. Only more significant breaks of these basic levels are displayed to the user when optimized which avoids noise and messy signals. It will also display breaks with candles it deems to be bullish (e.g. having a longer upper or lower wick). Notation The notation of "B" denotes a break of either a Support or Resistance level with a volume greater than the threshold. The notation of "Bull or Bear Wick" denotes a bullish or bearish candle on the break. Settings: Left Bars - the number of bars left hand side of the pivot. Right Bars - the number of bars right hand side of the pivot. Volume Threshold - the threshold value (%) for the Volume Oscillator. Usage & Details: Knowing when a pivot S/R level is broken with significance can be of great help to a trader. Many times significant levels may not be broken with significant force and the move is therefore weaker and possibly not worth trading.
Pine Script™ 인디케이터
LuxAlgo의
275
Green Line Breakout (GLB)This is an implementation of Green Line Breakout (GLB) which is popularized by Eric Wish through his Wishing Wealth Blog. GLB indicator looks at a monthly chart for a stock that hit a new all time high recently and draw a green horizontal line at the highest price reached at any month, that has not been surpassed for at least 3 months. In other words, this method finds stock that reached an all-time high and has then rested for at least three months. When a stock moves through the green line or is above its last green line, it is an indication of strong buying interest. Read more about how to use the indicator in Wishing Wealth Blog. Usage Explanation: 1. Set the time frame to Monthly for a stock and automatically a green dashed line appears based on the calculation explained above 2. If no GLB found for a stock, then green line appears at 0.0 2. If you set any other time frame other than Monthly, no Green Dashed line shown
Pine Script™ 인디케이터
GreatStockMark의
7
ETS Breakout LevelsThis indicator mimics the breakout levels a professional trader would draw and watch for trading opportunities. It is a very powerful tool to have. The lines are drawn as soon as a new breakout level is detected, and the line is then automatically extended to the right, making it easy to see when the market reacts to it. Knowing where important levels on a chart are, immediately takes you from having no idea where the market might make a big move, to being a trader ready to take action at the right time. The Breakout Levels indicator is also very good at keeping you out of the market when it's simply choppy and difficult to trade, because the breakout levels will most likely fall outside of the choppy sideways consolidation area, but still prepare you for when the market finally picks a direction again. This indicator also includes colored time bands that mark times during the trading day where historically stocks often reverse course, or may enter a period of consolidation. These times coincide with tea breaks, lunch breaks or times when news are typically announced. For Forex traders, there are colored session bands that help you to easily see when the major markets are open. What Makes It So Powerful? - Give you a signal as early as possible and does not "repaint" once the bar completes - Reacts to fast market direction changes like a master trader - Is super easy to understand and implement in your trading - Can be used for Forex, Stocks and Crypto - Works on all timeframes This indicator also has a number of options you can change in Settings: 1. "Safety Margin" - I keep this at zero, but if you want a bigger "buffer" for safety before entering a trade you can increase this value. 2. "Hidden Above Interval (Minutes)" - The Forex sessions or Stock important daily times can be set to be hidden above a certain timeframe to keep your charts clean. 3. "Show Moving Averages" - All of the moving averages that are included for convenience can be shown or hidden by setting this value. 3.1. The next 5 settings all deal with moving averages that can be shown or hidden individually. 4. "Show Stock Pivot Times" - There are a number of trading times for US Stocks that are important during the trading day, and this setting will highlight them. 4.1. "Show Main Stock Pivot Times" - This shows only the Stock trading times that are deemed the most important, and around these times the market often change direction (e.g. after the morning break, after lunch, etc.) 5. "Show Forex Sessions" - Does pretty much what it says, and you can also adjust the hours if you wish. 6. "Extreme Move Reversal Points" - If an extreme market move has been detected, and this is enabled, a "X" will be shown above or below the bar to indicate that the market might reverse. 7. "More Signals" - If you want to see more potential breakout levels, enable this option. 8. "Show VWAP" - This will include the VWAP indicator as a convenience if selected. How To Use the ETS Breakout Levels Indicator 1. Add the indicator to any chart you wish to trade, Crypto, Forex or Stocks and set it to the timeframe you prefer. For instance, I use it on 1 minute and 5 minute charts for daytrading Stocks. For Forex I generally use a 15 minute chart, and longer timeframes for Crypto. 2. Open the Settings and change values to suit your requirements as described above. 3. When the indicator has determined that a new breakout level has formed, it will draw a line and extend it to the right so that you can see when future bars come close to it. 4. Price action will either bounce off it, or pierce through it and continue on. 5. If the market is relatively far away from smaller moving averages such as the 9 EMA or 20 EMA, expect that the price action might first move back to the moving averages before continuing in the new direction identified by the indicator. 6. When these levels are broken, it is often an indication of a breakout occurring and it can give you some very significant market moves. This is an "invite only" script, which means that you will need to let me know that you're interested in it before you can get access to it. This is a paid script, please follow the link in my profile to get the details or ask me directly. It may take up to 48 hours for me to respond, but I do my best to respond as quickly as possible. You will get 7 days to test it for yourself on all your charts with no restrictions.
Pine Script™ 인디케이터
EasyTradingSignals의
9
MedianBandsHere I propose another simple S/R band technique, works on all TF and all securities, this is again one of the simplest forms of logic with a little tweak to tackle modern volatile markets. It enables us to trade both mean reversion as well as breakout trades as it works in both trending and non-trending markets. You can even use pre-existing ranges as good position management markers. It requires little to no intervention from the user. The white line is the opening price of the day, I'm a big believer of that so you will find it everywhere in my indicators. :3 Past performance is not assurance of the future performance and this is for educational purposes only. The script will be protected to avoid theft but you can add to your favorites to use it as you please. Enjoy~
Pine Script™ 인디케이터
Pratik_4Clover의
2
Zays emaHey, as the creator of “zays ema” I’m proud to have coded such an indicator with much potential ,this indicator, unlike many, references a moving average on a lower time frame, and when applied to a chart you’ll see that when price is either above or below this moving average it will always return back to base to acquire equity, I use that term in full to the fact that, when price is on this moving average it will either consolidate for a period of time or react violently to the upside or downside. This is to be used as a conformation indicator For any other implemented strategy. thank you for your time, have fun :).
Pine Script™ 인디케이터
Zaavonl의
Consolidation Zones - LiveHello Traders! This is the script that finds Consolidation Zones in Realtime. How it works? - The script finds highest/lowest bars by using "Loopback Period" - Then it calculates direction - By using the direction and highest/lowest bar info it calculates consolidation zones in realtime - If the length of consolidation area is equal/greater than user-defined min length then this area is shown as consolidation zone - Then Consolidation Zone extends automatically if there is no breakout if you increase the Loopback Length then you get bigger consolidation zones: You have option to "Paint Consolidation Area" or not: Enjoy!
Pine Script™ 인디케이터
LonesomeTheBlue의
77
[Zekis]Turtle Trading Donchian Price Channels StrategyOne of the most famous strategy in the history of trading, #Turtle strategy have numerous legends, one of them is using Donchian Price Channels with 55 period for entries and 20 period for exits. Can be used with any time frame Added alerts I added re-entries and re-exits for more scalps or for laddering trading. Also you can modify parameters for entries and exits for your market needs. Trade safe! @Zekis
Pine Script™ 인디케이터
edward_Z의
11
Cyatophilum Intraday Breakouts [ALERT SETUP]Private indicator. Here is the alert version of the Triple Screen Strategy Recap of the strategy: The goal of this indicator is to be able to automate and backtest the strategy, all while staying on a single chart and without repainting. Features: Market Tide MACD configuration Market Wave choice between 3 oscillator: Elder Force Index, Stochastic and William Percent Range Automated Long and Short entries alerts Integrated Trailing Stop Loss system fully configurable with automated exit alerts Integrated Trailing Take profit system fully configurable with automated exit alerts Indicator samples Backtest version: Alerts Entry Long: Triggers on green long labels. Take Profit Long: Triggers on the "TAKE PROFIT" green flag if the long target is reached. Stop Loss Long: Triggers on the "STOP LOSS" or "TSSL" label if the stop loss line has been crossed. Exit Long: Triggers on either of Take Profit Long or Stop loss long. Entry Short: Triggers on red short labels. Take Profit Short: Triggers on the "TAKE PROFIT" green flag if the short target is reached. Stop Loss Short: Triggers on the "STOP LOSS" or "TSSL" label if the stop loss line has been crossed. Exit Short: Triggers on either of Take Profit Short or Stop Loss Short. To get access to this indicator use the link below Thanks for reading!
Pine Script™ 인디케이터
cyatophilum의
2
Cyatophilum Intraday Breakouts [BACKTEST]Private indicator. Access can be unlocked by purchasing a subscription on my website which link is in my profile signature. Here is the backtest version of the Triple Screen Strategy Recap of the strategy: The goal of this indicator is to be able to automate and backtest the strategy, all while staying on a single chart and without repainting. Features: Market Tide MACD configuration Market Wave choice between 3 oscillator: Elder Force Index, Stochastic and William Percent Range Automated Long and Short entries alerts Integrated Trailing Stop Loss system fully configurable with automated exit alerts Integrated Trailing Take profit system fully configurable with automated exit alerts Indicator samples Backtest Strategy time period can be choosen in the parameters of the indicator. Be aware that the chart is limited to 10 000 candles of the current timeframe for the backtest calculation. Default initial capital: 10 000$ Default order size: 100% of equity Default commission fees: 0.1% per transaction Backtest results below. Alerts Entry Long: Triggers on green long labels. Take Profit Long: Triggers on the "TAKE PROFIT" green flag if the long target is reached. Stop Loss Long: Triggers on the "STOP LOSS" or "TSSL" label if the stop loss line has been crossed. Exit Long: Triggers on either of Take Profit Long or Stop loss long. Entry Short: Triggers on red short labels. Take Profit Short: Triggers on the "TAKE PROFIT" green flag if the short target is reached. Stop Loss Short: Triggers on the "STOP LOSS" or "TSSL" label if the stop loss line has been crossed. Exit Short: Triggers on either of Take Profit Short or Stop Loss Short. You can get access to this indicator by purchasing a subscription using the link below. Thanks for reading!
Pine Script™ 스트래티지
cyatophilum의
6
TrendLines with AlertsThis isn't my own work, hence giving it in Open Source library for others to benefit from it too. I have tried to refin the output of trendlines in this Strategy The original Code is available at The script needs some modifications, so I'll be making further updates in future, but for now I'm publishing this because most people don't know how to track trandlines, moreover, some use Line.New() by tradingview Pinescript, which again is a bit difficult to deal with. This script is a basic version of trendlines on a certain angle (anglecheck was provided by the original author in his script). Nothing fancy in this script. Also Converted the original Script to Pinescript v4.
Pine Script™ 스트래티지
puneetghai의
11
(TBO) Trending Break OutTBO (Trending Break Out) is an indicator designed to help identify trends within the markets. Users are able to see trend continuations and potential trend reversals. Potential breakouts are also shown as trend strength increases or decreases. There are buy signals and short signals included as well. Clouds show underlying support or resistance areas and potential changes in trend strength. Pivots show resistance and support as well. -Brought to you by Drungle_OG and MooninPapa (YouTubes)
Pine Script™ 인디케이터
Drungle의
108
Tops & Bottoms FinderIntroduction I already shared a method to estimate tops and bottoms (1), the number of parameters could lead to optimization issues so i tried to make a simpler method. In this method i use a simple rescaling method based on individual direction deviation. I will explain further details below. The Indicator I use as source for the entire calculation an exponential moving average, the first reaction to this choice would be to think that i wanted to filter signals in order to reduce them, but the truth is that i wanted to have more signals instead, this is because the first calculations involving standard deviations are based on price direction, so by using a smooth input we can get more persistent values in a and b , but its totally up to you to use whatever you want in a , just take into account that less smooth = less signals, this is why i used this calculation process. a = close and length = 7 a = least squares moving average and length = 25 So you could use pretty much everything you want as input. Conclusion The accuracy of such indicators is still relatively low but i presented a way to estimate tops and bottoms without using highest/lowest or differencing thus creating a totally new approach. I encourage you to experiment with it and share your results. If you learned something with this post then i'am happy :) Notes Based on several complaints i will have to leave even sooner, i think the 7 of June will be a good day, so if you need something i encourage you to ask me now. With the hope you can understand. Thanks for reading ! (1)
Pine Script™ 인디케이터
alexgrover의
14
Zeus Pivot Points Support and Resistance Breakouts by ZekisZeus Pivot Support and Resistance Breakouts by Zekis Is an indicator with big results, it forms new support /resistance according to the last higher high or lower low (it prints new ones only if it breaks through the last one) Rules: - enter Long or Short when the support or resistance is craked - exit when new support or resistance is starts to form Alerts for entries and exits A moving average is added to filter signals (leave it at 1 for price close signals) Bar colors can be added to see longs, shorts or no position Background colors for longs, shorts or no position Enjoy! @Zekis
Pine Script™ 인디케이터
edward_Z의
3
QFT Crypto Bottom FeederQFT Crypto Bottom Feeder This indicator is intended to be used with alerts and Autoview for buy signals. I do not have sell signals enabled at the moment. The goal is to catch the bottoms of markets swings. I use this for 1,3 and 5 min charts for small %s. You can adjust the base sensitivity as well as how far down it's looking to buy. Defaults are 3 candles for bases/resistance, .20% below base for buys. The buy plots are absolute locations - so where they lie, is where the buy signal will execute.
Pine Script™ 인디케이터
Kuklaph의
9
FIRST 5-MINUTES ZONE AND HI-LO BRKOUTS..!FIRST 5-MINUTES ZONE -------------------------------- This script displays the first 5-Minutes high and low range zone and shades in gray color for identification of the zone. HIGH - LOW BREAKOUT ---------------------------- As we all know that a stock's best breakout level is its previous day's high or low. Hence I designed the script to automatically draw a line when the LTP is near or crossing Previous day's high or Low price, so that we can be sure in taking trading decisions. And added 30-EMA also PR.HIGH BREAKOUT ------------------------ PR.LOW BREAKOUT ------------------------ - hope this may be a little help for you traders for taking decisions. - HAPPY WEALTHY TRADING cheers SANJAY RAMANATHAN
Pine Script™ 인디케이터
sanjay_ramanathan의
24