지금 시작

Supertrend

Fibonacci Levels Based on Supertrend [By MUQWISHI]A “ Fibonacci Levels Based on Supertrend ” indicator is supertrend indicator planned with Fibonacci retracements levels. Fibonacci retracements provides a sequence of levels starting from 0% to 100% in addition to extension levels. 0% is measured to be the initial Supertrend line, and 100% is the previous Supertrend line where it has been broken by candle. This tool could be valuable in terms of managing trades by setting targets and reducing the risk in the trend direction. █ OVERVIEW █ INDICATOR SETTINGS Please let me know if you have any questions. Thank you.
Pine Script® 인디케이터
MUQWISHI의
22
PSAR-Support ResistanceParabolic Support Resistance -PSAR SR is based on the Dynamic Reversal Points of Price. This indicator eliminates the false signals of regular Parabolic SAR (Stop and Reverse). The Price of previous SAR Reversal point is plotted as Support and Resistance. The idea is to trade only after the previous reversal point is crossed and a new candle formation above / below the support resistance lines. Price moves sideways in between the S/R Lines mostly. Buy and Sell Signals are based on normal P-SAR settings however this S/R must be considered. Please be aware that the indicator cannot be used as a stand alone. Please make required confirmations before going into action. Disclaimer: Please use it at your own Risk.
Pine Script® 인디케이터
traderharikrishna의
6
Strategy Myth-Busting #12 - OSGFC+SuperTrend - [MYN]This is part of a new series we are calling "Strategy Myth-Busting" where we take open public manual trading strategies and automate them. The goal is to not only validate the authenticity of the claims but to provide an automated version for traders who wish to trade autonomously. Our 12th one is an automated version of the "The Most Powerful Tradingview Buy Sell Signal Indicator " strategy from "Power of Trading" who doesn't make any official claims but watching how he trades with this, it on the surface looked promising. The strategy author uses this on the 15 min strategy on mostly FOREX. Unfortunately as indicated by the backtest results below, we were not able to substantiate any good positive trading metrics from this, be it Profit, Markdown, Num Of Trades etc. This does seem to do okay with some entries but perhaps adding another indicator to this to filter out more noise might make it better. At least how this strategy is presented now, this is not something I recommend anyone use. This strategy uses a combination of 2 open-source public indicators: SuperTrend by TradingView Internal One-Sided Gaussian Filter w/ Channels By Loxx The SuperTrend indicator and the One-Sided Gaussian Filter complement each other by providing a more complete and accurate picture of market trends. The SuperTrend indicator is used to identify trends. It does this by calculating a moving average of the underlying securities price and then comparing the current price to the moving average. When the current price is above the moving average, the trend is considered bullish, and when it is below, the trend is considered bearish. The One-Sided Gaussian Filter is a mathematical tool that is used to smooth out fluctuations in financial data. It does this by removing random noise from the data, making it easier to identify patterns and trends. When the SuperTrend indicator is used in conjunction with the One-Sided Gaussian Filter, the smoothed price data generated by the filter is used as the input for the SuperTrend calculation. This provides a more accurate representation of market trends and helps to eliminate false signals generated by short-term price movements. As a result, the SuperTrend indicator is able to more accurately identify the underlying trend in the market and provide traders with a cleaner and more reliable signal to act upon. In summary, the SuperTrend indicator and the One-Sided Gaussian Filter complement each other by providing a more accurate and reliable representation of market trends, resulting in improved performance for traders. If you know of or have a strategy you want to see myth-busted or just have an idea for one, please feel free to message me. Trading Rules 15 min candles FOREX or Crypto Stop loss at swing high/low | 1.5 risk/ratio Long Condition SuperTrend and OSGFC generate buy signal Close Buy on Gaussian generating a sell signal Short Condition SuperTrend and OSGFC generate sell signal Close Buy on Gaussian generating a buy signal
Pine Script™ 전략
myncrypto의
3
Trail Blaze - (Multi Function Trailing Stop Loss) - [mutantdog]Shorter version: As the title states, this is a 'Trailing Stop' type indicator, albeit one with a whole bunch of additional functionality, making it far more versatile and customisable than a standard trailing stop. The main set of features includes: Three independent trailing types each with their own +/- multipliers: - Standard % change - ATR (aka Supertrend) - IQR (inter-quartile range) These can be used in isolation or summed together. A subsequent pair of direction specific multipliers are also included. Two separate custom source inputs are available, both feature the standard options alongside a selection of 'weighted inputs' and the option to use another indicator (selected via 'AUX'): - 'Centre' determines the value about which the trailing sum will be added to define the stop level. - 'Trigger' determines the value used for crossing of stops, initiating trend changes and triggering alerts. A selection of optional filters and moving averages are available for both. Furthermore there are various useful visualisation options available, including the underlying bands that govern the stop levels. Preset alerts for trend reversals are also included. This is not really an 'out-of-the-box' indicator. Depending upon the market and timeframe some adjustments will be necessary for it to function in a useful manner, these can be as simple or complex as the feature-set allows. Basic settings are easy to dial in however and the default state is intended as a good starting point. Alternatively with some experimentation, a plethora of unique and creative configurations are possible, making this a great tool for tweaking. Below is a more detailed overview followed by a bunch of simple example settings. ------------------------ Lengthy Version : DESIGN & CONCEPT Before we start breaking this down, a little background. This started off as an attempt to improve upon the ever-popular Supertrend indicator. Of course there are many excellent user created variants available utilising some interesting methods to overcome the drawbacks of the basic version. To that end, rather than copying the work of others, the direction here shifted towards a hybrid trailing stop loss with a bunch of additional user customisation options. At some point, a completely different project involving IQR got morphed into this one. After sitting through months of sideways chop (where this proved to be of limited use), at the time of publication the market has began to form some near term trend direction and it appears to be performing well in many different timeframes. And so with that out of the way... INPUTS The standard Supertrend (and most other variants) includes a single source input, as default set to 'hl2' (candle mid-range). This is the centre around which the atr bands are added/subtracted to govern the stop levels. This is not however the value which is used to trigger the trend reversal, that is usually hard-coded to 'close'. For this version both source values are adjustable: labelled 'centre' and 'trigger' respectively. Each has custom input selectors including the usual options, a selection of 'weighted inputs' and the option to use another indicator (selected from the Aux input). The 'weighted inputs' are those introduced in Weight Gain 4000, for more details please refer to that listing. These should be treated as experimental, however may prove useful in certain configurations. In this case 'hl-oc2' can be considered an estimate of the candle median and may be a good alternative to the default 'centre' setting of 'hl2', in contrast 'cc-ohlc4' can tend to favour the extremes in the trend direction so could be useful as a faster 'trigger' than the default 'close'. To cap them off both come with a selection of moving average filters (SMA, EMA, WMA, RMA, HMA, VWMA and a simple VWEMA - note: not elastic) aswell as median and mid-range. 'Centre' can also be set to the output of 'trigger' post-filter which can be useful if working with fast/slow crosses as the basis. DYNAMICS This is the main section, comprised of three separate factors: 'TSL', 'ATR' and 'IQR'. The first two should be fairly obvious, 'TSL' (trailing stop loss) is simply a percentage of the 'centre' value while 'ATR' (average true range) is the standard RMA-based version as used in Supertrend, Volatility Stop etc. The third factor is less common however: 'IQR' (inter-quartile range). In case you are unfamiliar the principle here is, for a given dataset, the greatest 25% and smallest 25% of samples are removed. The remainder is then treated as a set and the range is calculated by highest - lowest. This is a commonly used method in statistical analysis, by removing the extremes it is less prone to influence by outliers and gives a good representation of the main dispersion around the median. In practise i have found it can be a good alternative to ATR, translating better across multiple time-frames due to it representing a fraction of the total range rather than an average of per-candle range like ATR. Used in combination with the others it can also add a factor more representative of longer-term/higher-timeframe trend. By discarding outliers it also benefits from not being impacted by brief pumps/volatility, instead responding only to more sustained changes in trend, such as rallies and parabolic moves. In order to give an accurate result the IQR is calculated using a dataset of high, low and hlcc4 values for all bars within the lookback length. Once calculated this value is then halved which, strictly speaking, makes it a semi-interquartile range. All three of these components can be used individually or summed together to create a hybrid dynamics factor. Furthermore each multiplier can be set to both positive and negative values allowing for some interesting and creative possibilities. An optional smoothing filter can be applied to the sum, this is a basic SWMA-4 which is can reduce the impact of sudden changes but does incur a noticeable lag. Finally, a basic limiter condition has been hard-coded here to prevent the sum total from ever going below zero. Capping off this section is a pair of direction multipliers. These simply take the prior dynamics sum and allow for further multiplication applied only to one side (uptrend/lo-stop and downtrend/hi-stop). To see why this is useful consider that markets often behave differently in each direction, we've all seen prices steadily climb over several weeks and then abruptly dump in the process of a day or two, shorter time frames are no stranger to this either. A lack of downside liquidity, a panicked market, aggressive shorts. All these things contribute to significant differences in downward price action. This function allows for tighter stops in one direction compared to the other to reflect this imbalance. VISUALISATIONS With all of these options and possibilities, some visual aids are useful. Beneath the dynamics' section are several visual options including both sources post-filter and the actual 'bands' created by the dynamics. These are what govern the stop levels and seeing them in full can help to better understand what our various configurations actually do. We can even hide the stop levels altogether and just use the bands, making this a kind of expanded Keltner Channel. Here we can also find colour and opacity settings for everything we've discussed. EXAMPLES The obvious first example here is the standard %-change trailing stop loss which, from my experience, tends to be the best suited for lower time frames. Filtering should probably minimal here. In both charts here we use the default config for source inputs, the top is a standard bi-directional setup with 1.5% tsl while the bottom uses a 2.5% tsl with the histop multiplier reduced to 0 resulting in an uptrend only stoploss. Shown here in grey is the standard Supertrend which uses 'hl2' as centre and 'close' as trigger, ATR(10) multiplied by 3. On top we have the default filtered source config with ATR(8) multiplied by 2 which gives a different yet functionally similar result, below is the same source config instead using IQR(12) multiplied by 2. Notice here the more 'stepped' response from IQR following the central rally, holding back for a while before closing in on price and ultimately initiating reversal much sooner. Unlike ATR, the length parameter for IQR is absolute and can more significantly affect its responsiveness. Next we focus on the visualisation options, on top we have the default source config with ATR(8) multiplied by 2 and IQR(12) multiplied by 1. Here we have activated the switch to show 'bands', from this we can see the actual summed dynamics and how it influences the stop levels. Below that we have an altogether different config utilising the included filters which are now visible. In this example we have created a basic 8/21 EMA cross and set a 1% TSL, notice the brief fakeout in the middle which ordinarily might indicate a buy signal. Here the TSL functions as an additional requirement which in this case is not met and thus no buy signal is given. Finally we have a couple of more 'experimental' examples. On top we have Lazybear's 'Variable Moving Average' in white which has been assigned via 'aux' as the centre with no additional filtering, the default config for trigger is used here and a basic TSL of 1.5% added. It's a simple example but it shows how this can be applied to other indicators. At the bottom we return to the default source config, combining a TSL of 8% with IQR(24) multiplied by -2. Note here the negative IQR with greater length which causes the stop to close in on price following significant deviations while otherwise remaining fairly wide. Combining positive and negative multiples of each factor can yield mixed results, some more useful than others depending upon suitable market conditions. Since this has been quite lengthy, i shall leave it there. Suffice to say that there are plenty more ways to use this besides these examples. Please feel free to share any of your own ideas in the comments below. Enjoy.
Pine Script® 인디케이터
mutantdog의
20
GKD-C Variety MA Supertrend [Loxx]Giga Kaleidoscope Variety MA Supertrend is a Confirmation module included in Loxx's "Giga Kaleidoscope Modularized Trading System". █ Giga Kaleidoscope Modularized Trading System What is Loxx's "Giga Kaleidoscope Modularized Trading System"? The Giga Kaleidoscope Modularized Trading System is a trading system built on the philosophy of the NNFX (No Nonsense Forex) algorithmic trading. What is an NNFX algorithmic trading strategy? The NNFX algorithm is built on the principles of trend, momentum, and volatility. There are six core components in the NNFX trading algorithm: 1. Volatility - price volatility; e.g., Average True Range, True Range Double, Close-to-Close, etc. 2. Baseline - a moving average to identify price trend 3. Confirmation 1 - a technical indicator used to identify trends 4. Confirmation 2 - a technical indicator used to identify trends 5. Continuation - a technical indicator used to identify trends 6. Volatility/Volume - a technical indicator used to identify volatility/volume breakouts/breakdown 7. Exit - a technical indicator used to determine when a trend is exhausted How does Loxx's GKD (Giga Kaleidoscope Modularized Trading System) implement the NNFX algorithm outlined above? Loxx's GKD v1.0 system has five types of modules (indicators/strategies). These modules are: 1. GKD-BT - Backtesting module (Volatility, Number 1 in the NNFX algorithm) 2. GKD-B - Baseline module (Baseline and Volatility/Volume, Numbers 1 and 2 in the NNFX algorithm) 3. GKD-C - Confirmation 1/2 and Continuation module (Confirmation 1/2 and Continuation, Numbers 3, 4, and 5 in the NNFX algorithm) 4. GKD-V - Volatility/Volume module (Confirmation 1/2, Number 6 in the NNFX algorithm) 5. GKD-E - Exit module (Exit, Number 7 in the NNFX algorithm) (additional module types will added in future releases) Each module interacts with every module by passing data between modules. Data is passed between each module as described below: GKD-B => GKD-V => GKD-C(1) => GKD-C(2) => GKD-C(Continuation) => GKD-E => GKD-BT That is, the Baseline indicator passes its data to Volatility/Volume. The Volatility/Volume indicator passes its values to the Confirmation 1 indicator. The Confirmation 1 indicator passes its values to the Confirmation 2 indicator. The Confirmation 2 indicator passes its values to the Continuation indicator. The Continuation indicator passes its values to the Exit indicator, and finally, the Exit indicator passes its values to the Backtest strategy. This chaining of indicators requires that each module conform to Loxx's GKD protocol, therefore allowing for the testing of every possible combination of technical indicators that make up the six components of the NNFX algorithm. What does the application of the GKD trading system look like? Example trading system: Backtest: Strategy with 1-3 take profits, trailing stop loss, multiple types of PnL volatility, and 2 backtesting styles Baseline: Hull Moving Average as shown on the chart above Volatility/Volume: Volatility Ratio as shown on the chart above Confirmation 1: Variety MA Supertrend as shown on the chart above Confirmation 2: Williams Percent Range Continuation: Fisher Transform Exit: Rex Oscillator Each GKD indicator is denoted with a module identifier of either: GKD-BT, GKD-B, GKD-C, GKD-V, or GKD-E. This allows traders to understand to which module each indicator belongs and where each indicator fits into the GKD protocol chain. Giga Kaleidoscope Modularized Trading System Signals (based on the NNFX algorithm) Standard Entry 1. GKD-C Confirmation 1 Signal 2. GKD-B Baseline agrees 3. Price is within a range of 0.2x Volatility and 1.0x Volatility of the Goldie Locks Mean 4. GKD-C Confirmation 2 agrees 5. GKD-V Volatility/Volume agrees Baseline Entry 1. GKD-B Baseline signal 2. GKD-C Confirmation 1 agrees 3. Price is within a range of 0.2x Volatility and 1.0x Volatility of the Goldie Locks Mean 4. GKD-C Confirmation 2 agrees 5. GKD-V Volatility/Volume agrees 6. GKD-C Confirmation 1 signal was less than 7 candles prior Continuation Entry 1. Standard Entry, Baseline Entry, or Pullback; entry triggered previously 2. GKD-B Baseline hasn't crossed since entry signal trigger 3. GKD-C Confirmation Continuation Indicator signals 4. GKD-C Confirmation 1 agrees 5. GKD-B Baseline agrees 6. GKD-C Confirmation 2 agrees 1-Candle Rule Standard Entry 1. GKD-C Confirmation 1 signal 2. GKD-B Baseline agrees 3. Price is within a range of 0.2x Volatility and 1.0x Volatility of the Goldie Locks Mean Next Candle: 1. Price retraced (Long: close < close or Short: close > close ) 2. GKD-B Baseline agrees 3. GKD-C Confirmation 1 agrees 4. GKD-C Confirmation 2 agrees 5. GKD-V Volatility/Volume agrees 1-Candle Rule Baseline Entry 1. GKD-B Baseline signal 2. GKD-C Confirmation 1 agrees 3. Price is within a range of 0.2x Volatility and 1.0x Volatility of the Goldie Locks Mean 4. GKD-C Confirmation 1 signal was less than 7 candles prior Next Candle: 1. Price retraced (Long: close < close or Short: close > close ) 2. GKD-B Baseline agrees 3. GKD-C Confirmation 1 agrees 4. GKD-C Confirmation 2 agrees 5. GKD-V Volatility/Volume Agrees PullBack Entry 1. GKD-B Baseline signal 2. GKD-C Confirmation 1 agrees 3. Price is beyond 1.0x Volatility of Baseline Next Candle: 1. Price is within a range of 0.2x Volatility and 1.0x Volatility of the Goldie Locks Mean 3. GKD-C Confirmation 1 agrees 4. GKD-C Confirmation 2 agrees 5. GKD-V Volatility/Volume Agrees █ Variety MA Supertrend What is Variety MA Supertrend? Supertrend indicator was created by Olivier Seban to work on different time frames. It works for futures, forex, and equities. It is used in 15 minutes, hourly, weekly, and daily charts. Based on the parameters of multiplier and period, the indicator uses 3 for multiplier and 7 for ATR as default values. Average True Range is represented by the number of days while the multiplier is the value by which the range is multiplied. This version smooths the Supertrend with the option of 62 different smoothing methods. Requirements Inputs Confirmation 1 and Solo Confirmation: GKD-V Volatility / Volume indicator Confirmation 2: GKD-C Confirmation indicator Outputs Confirmation 2 and Solo Confirmation: GKD-E Exit indicator Confirmation 1: GKD-C Confirmation indicator Continuation: GKD-E Exit indicator Additional features will be added in future releases.
Pine Script® 인디케이터
loxx의
Profitable Supertrend v0.1 - AlphaThis a script to try detect the best combination of supertrend parameters in a space of time. Sadly the script is slow. Evaluate all possibilities params is hard for a pinescript and my knowledge too. In some cases, when you want evaluate many time could be the script fails for timeout. Perhaps with time I could enhance. For this problem of speed the calculate of combinatios it's not complete: In factor use a increment of 0.2 in each param (0.1, 0.3, 0.5 ...) in period the increment for each value is 3. The range for factor it's from 3.0 to 12.0. The range of period it's from 10 to 43 My knowledge don't let me go more far. Perhaps with time I can enhance the script.
Pine Script® 인디케이터
gnalis의
6
HSupertrendLibrary "HSupertrend" Supertrend implementation based on harmonic patterns hsupertrend(zProperties, pProperties, errorPercent, showPatterns, patternColor)   derives supertrend based on harmonic patterns   Parameters:      zProperties : ZigzagProperties containing Zigzag length and source array      pProperties : PatternProperties used for calculation      errorPercent : Error threshold for scanning patterns      showPatterns : Draw identified patterns structure on chart      patternColor : Color of the pattern lines to be drawn   Returns: ZigzagProperties   ZigzagProperties contains values required for zigzag calculation   Fields:      length : Zigzag length      source : Array containing custom OHLC. If not set, array.from(high, low) is used PatternProperties   PatternProperties are essential pattern parameters used for calculation of bullish and bearish zones   Fields:      base : Base for calculating entry and stop of pattern. Can be CD, minmax or correction. Default is CD      entryPercent : Distance from D in terms of percent of Base in the direction of pattern      stopPercent : Distance from D in terms of percent of Base in the opposite direction of pattern      useClosePrices : When set uses close price for calculation of supertrend breakout
Pine Script® 라이브러리
Trendoscope의
Harmonic Patterns Based SupertrendExtending the earlier implemented concept of Harmonic-Patterns-Based-Trend-Follower , in this script, lets make it work as supertrend so that it is more easier to operate. 🎲 Process 🎯 Derive Zigzag and scan harmonic patterns for last 5 confirmed pivots 🎯 If a pattern is found, bullish and bearish zones are calculated based on parameter Base 🎯 These bullish and bearish zones act as supertrend based on current trade in progress. 🎯 When in bullish mode, bearish zone will only go up irrespective of new pattern forming new low. Similarly when in bearish mode, bullish zones will only come down - this is done to imitate the standard supertrend behaviour. 🎲 Note Patterns are not created on latest pivot as last pivot will be unconfirmed and moving. Due to this, patterns appear after certain delay - patterns will not be real time. But, this is expected and does not impact the overall process. Here are few chart captures to demonstrate how it works. 🎲 Settings Settings are explained in the screenshot below.
Pine Script® 인디케이터
Trendoscope의
13
Trendly ╭━━━━╮╱╱╱╱╱╱╱╱╭┳╮ ┃╭╮╭╮┃╱╱╱╱╱╱╱╱┃┃┃ ╰╯┃┃┣┻┳━━┳━╮╭━╯┃┃╭╮╱╭╮ ╱╱┃┃┃╭┫┃━┫╭╮┫╭╮┃┃┃┃╱┃┃ ╱╱┃┃┃┃┃┃━┫┃┃┃╰╯┃╰┫╰━╯┃ ╱╱╰╯╰╯╰━━┻╯╰┻━━┻━┻━╮╭╯ ╱╱╱╱╱╱╱╱╱╱╱╱╱╱╱╱╱╭━╯┃ ╱╱╱╱╱╱╱╱╱╱╱╱╱╱╱╱╱╰━━╯ About the script: This script is an easy-to-use trend indicator, which is based on another popular indicator called "Supertrend" . The basic idea is very simple, i.e. to compute Average True Range(ATR) and use that as the basis for trend detection. The key difference lies in a custom trend detection method, that computes trends across different timeframes and projects them in a table view. The script also tries to improve the behaviour of the existing indicator by highlighting flat regions on the chart, indicating sideways market or potential trend reversals. How to use it: You can use it just like any other indicator, add it to your chart and start analysing market trends. Results can be interpreted as follows. Indicator output is currently made up of two main components: >> Trend Table: Appears at the bottom right of your screen Contains trend indicator for 9 different timeframes Timeframes can be adjusted using indicator settings panel Green Up Arrow --> Up Trend Red Down Arrow --> Down Trend >> Enhanced Supertrend: Shows up as a line plot on the chart Green line indicates up trend Red line indicates down trend White regions indicates slow moving markets or a potential trend reversal Indicator can be used on any timeframe, it provides a view of current and historical market trend Can be used as an indicator for entering/exiting trades Can be used to build custom trading strategies
Pine Script® 인디케이터
sudoMode의
19
Kioseff Trading - AI-Optimized Supertrend AI-Optimized Supertrend Introducing AI-Optimized Supertrend: a streamlined solution for traders of any skill level seeking to rapidly test and optimize Supertrend. Capable of analyzing thousands of strategies, this tool cuts through the complexity to identify the most profitable, reliable, or efficient approaches. Paired with TradingView's native backtesting capabilities, the AI-Optimized Supertrend learns from historical performance data. Set up is easy for all skill levels, and it makes fine-tuning trading alerts and Supertrend straightforward. Features Rapid Supertrend Strategy Testing : Quickly evaluate thousands of Supertrend strategies to find the most effective ones. AI-Assisted Optimization : Leverage AI recommendations to fine-tune strategies for superior results. Multi-Objective Optimization : Prioritize Supertrend based on your preference for the highest win rate, maximum profit, or efficiency. Comprehensive Analytics : The strategy script provides an array of statistics such as profit factor, PnL, win rate, trade counts, max drawdown, and an equity curve to gauge performance accurately. Alerts Setup : Conveniently set up alerts to be notified about critical trade signals or changes in performance metrics. Versatile Stop Strategies : Experiment with profit targets, trailing stops, and fixed stop losses. Binary Supertrend Exploration : Test binary Supertrend strategies. Limit Orders : Analyze the impact of limit orders on your trading strategy. Integration with External Indicators : Enhance strategy refinement by incorporating custom or publicly available indicators from TradingView into the optimization process. Key Settings The image above shows explanations for a list of key settings for the optimizer. Set the Factor Range Limits : The AI suggests optimal upper and lower limits for the Factor range, defining the sensitivity of the Supertrend to price fluctuations. A wider range tests a greater variety, while a narrower range focuses on fine-tuning. Adjust the ATR Range : Use the AI's recommendations to establish the upper and lower bounds for the Average True Range (ATR), which influences the Supertrend's volatility threshold. ATR Flip : This option lets you interchange the order of ATR and Factor values to quicky test different sequences, giving you the flexibility to explore various combinations and their impact on the Supertrend indicator's performance. Strategies Evaluated : Adjust this setting to determine how many Supertrend strategies you want to assess and compare. Enable AI Mode : Turn this feature on to allow the AI to determine and employ the optimal Supertrend strategy with the desired performance metric, such as the highest win rate or maximum profitability. Target Metric : Adjust this to direct the AI towards optimizing for maximum profit, top win rates, or the most efficient profits. AI Mode Aggressiveness : Set how assertively the AI pursues the chosen performance goal, such as highest profit or win rate. Strategy Direction : Choose to focus the AI's testing and optimization on either long or short Supertrend strategies. Stop Loss Type : Specify the stop loss approach for optimization—fixed value, a trailing stop, or Supertrend direction changes. Limit Order : Decide if you want to execute trades using limit orders for setting your profit targets, stop losses, or apply them to both. Profit Target : Define your desired profit level when using either a fixed stop loss or a trailing stop. Stop Loss : Define your desired stop loss when using either a fixed stop loss or a trailing stop. How to: Find the best Supertrend for trading It's important to remember that merely having the AI-Optimized Supertrend on your chart doesn't automatically provide you with the best strategy. You need to follow the AI's guidance through an iterative process to discover the optimal Supertrend settings and strategy. Optimizing Supertrend involves adjusting two key parameters: the Factor and the Average True Range (ATR). These parameters significantly influence the Supertrend indicator's sensitivity and responsiveness to price movements. Factor : This parameter multiplies the ATR to determine the distance of the Supertrend line from the price. Higher values will create a wider band, potentially leading to fewer trade signals, while lower values create a narrower band, which may result in more signals but also more noise. ATR (Average True Range) : ATR measures market volatility. By using the ATR, the Supertrend adapts to changing market volatility; a higher ATR value means a more volatile market, so the Supertrend adjusts accordingly. During the optimization process, these parameters are systematically varied to determine the combination that yields the best performance based on predefined criteria such as profitability, win rate, or risk management efficiency. The optimization aims to find the optimal Factor and ATR settings. 1.Starting Your Strategy Setup Begin by deciding your goals for each trade: your profit target and stop loss, or if all trades exit when Supertrend changes direction. You'll also choose how to manage your stops – whether they stay put (fixed) or move with the price (trailing), and whether you want to exit trades at a specific price (limit orders). Keep the initial settings for Supertrend Factor Range and Supertrend ATR Range at their default to give the tool a broad testing field. The AI's guidance will refine these settings to pinpoint the most effective ones through a process of comprehensive testing. Demonstration Start: We'll begin with the settings outlined in the key settings section, using Supertrend's direction change to the downside as our exit signal for all trades. 2. Continue applying the AI’s suggestions Keep updating your optimization settings based on the AI's recommendations. Proceed with this iterative optimization until the "Best Found" message is displayed, signaling that the most effective strategy has been identified. While following the AI's suggestions, we've been prompted with a new suggestion: increase the number of strategies evaluated. Keep following the AI's new suggestions to evaluate more strategies. Do this until the "Best Found" message shows up. Success! We continued to follow the AI’s suggestions until “Best Found” was indicated! AI Mode AI Mode incorporates Heuristic-Based Adaptive Learning to fine-tune trading strategies in a continuous manner. This feature consists of two main components: Heuristic-Based Decision Making: The algorithm evaluates multiple Supertrend-based trading strategies using metrics such as Profit and Loss (PNL), Win Rate, and Most Efficient Profit. These metrics act as heuristics to assist the algorithm in identifying suitable strategies for trade execution. Online Learning: The algorithm updates the performance evaluations of each strategy based on incoming market data. This enables the system to adapt to current market conditions. Incorporating both heuristic-based decision-making and online learning, this feature aims to provide a framework for trading strategy optimization. AI Mode Settings AI Mode Aggressiveness: Description: The "AI Mode Aggressiveness" setting allows you to fine-tune the AI's trading behavior. This setting ranges from “Low” to “High”, with “High” indicating a more assertive trading approach. Functionality: This feature filters trading strategies based on a proprietary evaluation method. A higher setting narrows down the strategies that the AI will consider, leaning towards more aggressive trading. Conversely, a lower setting allows for a more conservative approach by broadening the pool of potential strategies. Optimization Trading system optimization is immensely advantageous when executed with prudence. Technical-oriented, mechanical trading systems work when a valid correlation is methodical to the extent that an objective, precisely-defined ruleset can consistently exploit it. If no such correlation exists, or a technical-oriented system is erroneously designed to exploit an illusory correlation (absent predictive utility), the trading system will fail. Evaluate results practically and test parameters rigorously after discovery. Simply mining the best-performing parameters and immediately trading them is unlikely a winning strategy. Put as much effort into testing strong-performing parameters and building an accompanying system as you would any other trading strategy. Automated optimization involves curve fitting - it's the responsibility of the trader to validate a replicable sequence or correlation and the trading system that exploits it.
Pine Script™ 전략유료 스크립트
KioseffTrading의
21
Supertrend Rally RollercoasterSupertrend indicator is a trend following indicator similar to moving averages. You can use this on any timeframe if there is enough market data. What about the Supertrend Rally Rollercoaster? The main objective of this indicator is to avoid fake trends as much as possible and find the best bull and bear runs. The best timeframe is the 15 minute timeframe. This indicator consist of 4 Supertrend periods. The most important period of this indicator is the fourth period. This is the period that determines the overall trend for the timeframe. The rest of the bands can be used as confirmations to the trend, determine trade entries, and possible as trade exits and scalping. The main use of this indicator is to be used with value lines and contraction zones, as showed in the picture below. So basically the average price or the mean is the value line produced by the contraction. The expansion follows, and then you must wait for the actual trend. If price is below the value line then you wait for a uptrend and preferably a proper entry. Then you ride it up to the value line as TP, or you can also let it continue on riding, but your preference. If price is above value then, you wait for a downtrend and then short to value. This is the main trading strategy behind this indicator and what it has intended for. The indicator also comes with alerts on when the trend changes and also on the arrows which are take profit symbols. On an uptrend you will see red take profit signals which work with RSI. They tell you when a possible trend reversal can take place.
Pine Script® 인디케이터
Traders_Endeavors의
Heikin Ashi SupertrendAbout this Strategy This supertrend strategy uses the Heikin Ashi candles to generate the supertrend but enters and exits trades using normal candle close prices. If you use the standard built in Supertrend indicator on Heikin Ashi candles, it will produce very unrealistic backtesting results because it uses the Heikin Ashi prices instead of the real prices. However, by signaling the supertrend reversals using Heikin Ashi while using standard candle close prices for the entries and exits, it corrects the backtesting errors and gives you a more realistic equity curve. You should set the chart to use standard candles and then hide them (the strategy creates the candles). This strategy includes: Plotting of Heikin Ashi candles Heikin Ashi Supertrend Long and Short Entry Signals Move stop loss after trade is X% in profit Profit Target Stop Loss Built in Alertatron automation Alertatron Trade Automation Integration For Alertatron integration, be sure to configure the strategy settings and "Enable Webhook Messages" before creating an alert with {{strategy.order.alert_message}} in the body of your alert message. Be sure to enable webhooks and point it to your Incoming Alertatron webhook URL. Notes While this strategy does pretty well during trending markets, It's worth noting that the Buy and Hold ROI is much better during peak times of the bull market Not financial advice. Do not risk more than you can afford to lose.
Pine Script™ 전략
jordanfray의
17
[Sniper] SuperTrend + SSL Hybrid + QQE MODHi. I’m DuDu95. ********************************************************************************** This is the script for the series called "Sniper". *** What is "Sniper" Series? *** "Sniper" series is the project that I’m going to start. In "Sniper" Series, I’m going to "snipe and shoot" the youtuber’s strategy: to find out whether the youtuber’s video about strategy is "true or false". Specifically, I’m going to do the things below. 1. Implement "Youtuber’s strategy" into pinescript code. 2. Then I will "backtest" and prove whether "the strategy really works" in the specific ticker (e.g. BTCUSDT) for the specific timeframe (e.g. 5m). 3. Based on the backtest result, I will rate and judge whether the youtube video is "true" or "false", and then rate the validity, reliability, robustness, of the strategy. (like a lie detector) *** What is the purpose of this series? *** 1. To notify whether the strategy really works for the people who watched the youtube video. 2. To find and build my own scalping / day trading strategy that really works. ********************************************************************************** *** Strategy Description *** This strategy is from " QQE MOD + supertrend + ssl hybrid" by korean youtuber "코인투데이". "코인투데이" claimed that this strategy will make you a lot of money in any crypto ticker in 15 minute timeframe. ### Entry Logic 1. Long Entry Logic - Super Trend Short -> Long - close > SSL Hybrid baseline upper k - QQE MOD should be blue 2. Short Entry Logic - Super Trend Long -> Short - close < SSL Hybrid baseline lower k - QQE MOD should be red ### Exit Logic 1. Long Exit Logic - Super Trend Long -> Short 2. Short Entry Logic - Super Trend Short -> Long ### StopLoss 1. Can Choose Stop Loss Type: Percent, ATR, Previous Low / High. 2. Can Chosse inputs of each Stop Loss Type. ### Take Profit 1. Can set Risk Reward Ratio for Take Profit. - To simplify backtest, I erased all other options except RR Ratio. - You can add Take Profit Logic by adding options in the code. 2. Can set Take Profit Quantity. ### Risk Manangement 1. Can choose whether to use Risk Manangement Logic. - This controls the Quantity of the Entry. - e.g. If you want to take 3% risk per trade and stop loss price is 6% below the long entry price, then 50% of your equity will be used for trade. 2. Can choose How much risk you would take per trade. ### Plot 1. Added Labels to check the data of entry / exit positions. 2. Changed and Added color different from the original one. (green: #02732A, red: #D92332, yellow: #F2E313) 3. SuperTrend and SSL Hybrid Baseline is by default drawn on the chart. 4. If you check EMA filter, EMA would be drawn on the chart. 5. Should add QQE MOD indicator manually if you want to see QQE MOD. ********************************************************************************** *** Rating: True or False? ### Rating: → 3.5 / 5 (0 = Trash, 1 = Bad, 2 = Not Good, 3 = Good, 4 = Great, 5 = Excellent) ### True or False? → True but not a 'perfect true'. → It did made a small profit on 15 minute timeframe. But it made a profit so it's true. → It worked well in longer timeframe. I think super trend works well so I will work on this further. ### Better Option? → Use this for Day trading or Swing Trading, not for Scalping. (Bigger Timeframe) → Although the result was not good at 15 minute timeframe, it was quite profitable in 1h, 2h, 4h, 8h, 1d timeframe. → Crypto like BTC, ETH was ok. → The result was better when I use EMA filter. ### Robust? → Yes. Although result was super bad in 5m timeframe, backtest result was "consistently" profitable on longer timeframe (when timeframe was bigger than 15m, it was profitable). → Also, MDD was good under risk management option on. ********************************************************************************** *** Conclusion? → I recommend you not to use this on short timeframe as the youtuber first mentioned. → In my opinion, I can use on longer timeframe like 2h or bigger with EMA filter, stoploss and risk management.
Pine Script™ 전략
DuDu95의
7
Bearish Market Indicator V2Definition Have you ever wonder whether if the stock/index/market is "bearish" ? A Bearish Market Indicator (B.M.I) is not a new concept, the definition is simply 20% lower from the recent (term: short-term, recent: usually within a year, a.k.a 1 year) highs (closing price with in the recent period or within in a year or simply a 52-Week High). It is called “bearish” by definition when the closing price is below 20% from the highest price within the year (52-Week high: Green Line). To visualize the “20%” below the recent highs, there is a plot (line: light yellow color in the middle) called a Bearish Market By Definition Value. For example, the SPX 500 has been in a bearish market which is why there is a purple color highlight over the 52-Week High (green line) since September 21, 2022 because the closing price is below the Bearish Market By Definition Value (light yellow color) or “20% below the recent highs”. Finally, there is a red line under in the graph and it is the lowest price within a year. So when you hear, “this ticker is at a 52-Week Low”, you know what it means. Line Summary: Green Color Line = 52-Week High Yellow Color Line = 20% away from the 52-Week High or Bearish Market By Definition Value Red Color Line = 52-Week Low Color Summary: Red Color = Bad Saturated Red Color = Very Bad Purple Color = Bearish (It may look pink: red + purple) White Color = Less Bad (That’s because there is no certainty only probability) Green Color = Not too Bad (That’s because there is no certainty only probability) Now to more complicated Metrics >> If you do not like the technical indicators, go to the indicator settings, uncheck the tables. Otherwise, please continue reading. << Pre-requisites + Understand that the indicators are lagging indicators. + Using it under “D” or “Day” interval + Already Understand: Moving Averages, Stochastic-RSI, RSI, Super Trend and MACD. + Please be aware that this might not be compatible with traders! Indicators This B.M.I is fused (comprised, combined) with multiple indicators: - Moving Averages I would not rely just on the Moving Averages (MA) since it is a lagging indicator. The values are derived by finding the differences with respect to the MAs (between the closing price and with the respect MA). - Stochastic-RSI Stochastic and RSI combo with RSI-Color coating. The first value is the rsi-stochastic-k followed by the rsi-stochastic-d both are compartmentalized with “|”. Parameter: Numbers > 80 Not Good Numbers < 20 Is it time? (You can manually verify the lines (k, d) or the values from them) - Relative Strength Index (RSI) The first value is the rsi followed by the rsi-ma both are compartmentalized with “|”. It is also coated with RSI-color. Parameter: Numbers > 70 Overbought | Color Red If the RSI > RSI’s MA = Green If the RSI < RSI’s MA = Red Numbers < 30 Oversold | Color Red - Moving Averages Convergence Divergence (MACD) The first value is the MACD-line followed by the signal-line both are compartmentalized with “|”. Macd-line > signal line = green Macd-line < signal line = red - Supertrend (please look up from the documentation; i can not embed the link) Think of this way, you’re riding a wave. If the wave is climbing, expect the price to follow. Direction < 0 = Green Direction > 0 = Red - Other Trend similar to supertrend This is similar to the Super Trend according the some. Imagine you’re drawing a trend line manually within 6 months. Within the period, the line gets smoothed over and over til the n=9. > If the closing is less than the 9th value, it implies the trend is slowing down. Usage Adjustments + Since there are different holidays from different countries, you can change the BMI-Period from the indicator settings “BMI-4khansolo”. + You can hide Technical Indicator Tables, it is also under the settings (see above). > This will show red over the 52-Week high if it tests for positive . Purpose Do you like eating the same food over and over? No! I love different food! I also love a variety of indicators. Especially, I love having MULTIPLE indicators presented in one canvas at the same time (personalized). After spending a lot of time, I want to share my “FOOD” which is made of different ingredients (indicators) with someone who appreciates food! This Makes me a chef isn't it? Yes! Chef! Questions? If you have questions or spotted errors, please comment them below so that I can improve. Sources All the materials (i.e., functions like ta.rsi, etc...) used in here are available in the platform. All the references or sources materials are commented with the code since the I am not allowed to put them here.
Pine Script® 인디케이터
fourkhansolo의
2
Trend Hunter v4This strategy follows the Trend Hunter training strategy taught at InvestIshare. Entries are made based predominantly on the price action being above/below the Ichimoku Cloud with the ATR based super trend being used as a trailing stop loss. Additional trend tracking tools can be toggled on / off to improve the wind rate on some time frames, with additional options available to limit entries if certain conditions are met. If you would like access to this indicator, send me a DM on the Investishare Discord in the Trend Hunters channel. The default parameters are set for BTC on the 2 HR time frame
Pine Script™ 전략
godzcopilot의
1
Orion:Supertrend HybridSupertrend Hybrid This indicator is a combination of the Supertrend and Donchian Channels. The original Supertrend indicator shades the area from the mean (hl2) of the bar/candle to the Supertrend line. This Hybrid uses the mid section of the Donchian channel to the Supertrend line as the area to be shaded. This provides a visual of when prices are getting close to potentially reversing the trend. Values: Length = Length of the Donchian Channels (Default: 12) ATR Length = Lookback length of the ATR calculation (Default: 10) Factor = Multiply the ATR by this value to get a trend reversal value (Default: 3.0) Prices cross above the red line indicating a bullish trend is in play Prices cross below the green line indicating a bearish trend is in play Yellow line represents the mid-section of the Donchian Channel. Suggested usage: Add a Stochastic and set the Stochastic %K Length to the same value as the Donchian Length. When below trend (red line dominate) and prices cross into the shaded area, if stochastic crosses above 70, prices may challenge/cross the red trend line. When above trend (green line dominate) and prices cross into the shaded area, if stochastic crosses below 30, prices may challenge/cross the green trend line. IF in an up trend (green line dominate) and stochastic crosses/remains above 70, potential higher price movement exists. IF in an down trend (red line dominate) and stochastic crosses/remains below 30, potential lower price movement exists.
Pine Script® 인디케이터
priceprophet의
2
Supertrend, MA 44|6, EMA FIBS 13|21|34I have this indicator based on my strategy. This indicator is based on existing functions available in the system. I haven't added anything new. This indicator uses Supertrend, MA44|6, EMA fibs 13|21|34 combining to find a profitable trade. - Supertrend : Indicator uses supertrend strategy with default ATR period of 10 and Factor value 3. These values can be customized based on your preferences. Uptrend is denoted by green color and downtrend by red color. You can change the colors based on your preferences. - MA 44|6: Indicator plots moving averages of 44 and 6. These values can be customized based on your preferences. Although it is highly recommended to keep 44 as is. Value 6 can be adjusted based on your preference. Default color for uptrend is green and for downtrend is red. You can change the colors based on your preferences. - FIBS EMA 13|21|34: Indicator plots EMA of fibbonacci numbers 13, 21,34 to identify consolidation and breakout. The periods can be adjusted but it is highly recommended not to do so. Default colors for 13,21 and 34 is Aqua, Blue and Navy respectively. You can change the colors based on your preferences. When to take trade? To take a trade all conditions needs to be fulfilled. Supertrend : Always take a trade in the direction of Supertrend. It is always advisable to take trade if the trend is changing or price is taking support of resistance. MA 44|6: Moving average 44 indicates average price of 44 last candles and 6 for last 6 candles. Price crossing MA 44 indicates change in trend. It is advisable to take trade at crossing the line above or below. If many candles closing near MA 44 then it indicates consolidation. The more far the candle closes from MA44 the better. MA 6 is used to identify when to enter or exit the trade. If candle closes away from MA 6 then you can wait for candle to start near the MA 6 line. If candle closes above/below MA 6 you can exit your trade. Fibonacci 13|21|34: When all lines are closed it indicates consolidation. When price breakouts to either direction you can take a trade in that direction with following conditions. Bullish Trade: When to enter? If candle closed above MA 44, Supertrend is uptrend and EMA Fibs are moving away and are above MA 44. The price is near to MA 6 line then you can enter into bullish trade. If price is away from MA 6 then you should wait until the price/line comes near to avoid loss. When to exit? Price moving in opposite direction: You should set a stop loss when you enter the trade. The stop loss can be set below the low of the previous candle or any other strategy you have. But it is really important to set the stop loss. If price moves in opposite direction then your stop loss will hit and you will be out of the trade. Price moving in same direction: Once you enter the trade you can exit based on two conditions whichever suits you. 1. Exit the trade if candle closes below MA6. The drawback is you may exit too early. You can also adjust the period based on your preferences. 2. Exit the trade if candle closed below low of previous candle. The drawback is you may book less profit but you can capture the movement very well. Bearish Trade: When to enter? If candle closed below MA 44, Supertrend is downtrend and EMA Fibs are moving away and are below MA 44. The price is near to MA 6 line then you can enter into bearish trade. If price is away from MA 6 then you should wait until the price/line comes near to avoid loss. When to exit? Price moving in opposite direction: You should set a stop loss when you enter the trade. The stop loss can be set below the low of the previous candle or any other strategy you have. But it is really important to set the stop loss. If price moves in opposite direction then your stop loss will hit and you will be out of the trade. Price moving in same direction: Once you enter the trade you can exit based on two conditions whichever suits you. 1. Exit the trade if candle closes below MA6. The drawback is you may exit too early. You can also adjust the period based on your preferences. 2. Exit the trade if candle closed below low of previous candle. The drawback is you may book less profit but you can capture the movement very well. When not to take trade? 1. If MA 44 is completely horizontal and EMA Fibs are very close to each other. This indicates that the market is consolidated and if you enter the trade you may hit stop loss very often. Note: Please note that I am not expert and I don't take any responsibility of your profits or losses. I have created this indicator based on my knowledge and it is for study purpose. Use of this indicator is totally your responsibility. Use all your knowledge and expertise and don't totally depend on the indicator. Don't forget to use stop loss and do money management. Happy Trading!
Pine Script® 인디케이터
SandeepPatil96의
Trend SuggestionsThis brings together a number of variables to produce trend predictions that could be utilized as decision-making tools. Uses the aforementioned price and volume derivatives - A moving average and three weighted moving averages (WMA1, WMA2, WMA3) - Super Trend Line (ST) - Opening Range Breakout on Five Minutes, Resistance Bands Pocket pivots, support, and price volume he Direction is determined by the High and Low Bands of WMAs and the Supertrend Line, which are used to determine the Upper and Lower Lines around the Price. When the price passes below the lower boundary of the band, a downtrend is said to have begun. Similarly, for an uptrend, this continues until the price passes over the upper edge of the band. Teal for an uptrend and fuchsia for a downturn area shared by the band to identify the trend. The first five minutes of the breakout lines have a tiny buffer augmentation of 11% applied to them. Based on what has been observed, support and resistance zones have been somewhat changed from the figures that are often utilized (might work other markets as well) The markings that may be seen are as follows: - Blue Triangle indicates a pocket pivot with an upward bias; - Maroon Triangle indicates a pocket pivot with a downward bias; - Teal colored Diamonds indicate price upthrusts and potential trend confirmation locations, depending on success or failure. - Similar backdrop color changes that look as vertical shading are also used to identify them. - Fuchsia-colored diamonds indicate price declines and a potential trend, depending on whether it persists or fails. - Dark green and maroon square boxes indicate potential price reversals in the support and resistance bands, respectively. It goes without saying that this work is derived from numerous other open-source community initiatives. Feel free to adjust anything you'd like, and we appreciate any feedback.
Pine Script® 인디케이터
VVVfV의
7
Range Detector Indicator [Misu]█ This indicator shows an upper and lower band based on Highs and Lows. Depending on this, the indicator interprets a ranging market, an uptrend or a downtrend. █ Usages: The purpose of this indicator is to identify when the price is ranging.   It's also used to identify changes in trends, breaking points, and trend reversals.  But it can also be used to show resistance or support levels. █ Features: > Price Action Change Alerts > Price Action Change Labels > Color Bars > Show Bands █ Parameters: Deviation: A parameter used to calculate pivots. Depth: A parameter used to calculate pivots. Activate Range Detection: Check the box to activate range detection. Band% Offset: A factor that is used to vary the bands offset. 
Pine Script® 인디케이터
Fontiramisu의
19
CPR with MAs, Super Trend & VWAP by MackraniThis script will allow to add CPR with Standard Pivots and 4 Indicators. Standard Pivot has 9 levels of support and 9 levels of resistance lines. It has CPR , 3 levels of Day-wise pivots , 3 levels of Weekly pivots and 3 Levels of Monthly Pivots . In Addition to the CPR and Pivot , this script will allow user to Add 4 more Indicators - SMA , EMA , VWAP and SuperTrend as well. All the Support and resistance levels can be enabled / disabled from settings. It will allow to select multiple combinations of support and resistance levels across 3 levels at any of the 3 time-frames individually and combined. All 4 Indicators can be can be enabled / disabled from settings. This will allow the indicators to be plotted individually and combined along with any combination of CPR & Pivots . These number of combinations will allow user to visualize the charts with desired indicators, pivot support & resistance levels on all or any of the 3 time frames. For Ease of access, listed few points on how the script works.. - CPR and day-wise level 1 & 2 (S1 & R1) enabled by default and can be changed from settings - Day-wise Level 2 & 3 (S2, R2, S3 & L3) can be enabled from settings - Weekly 3 levels and Monthly 3 levels can be enabled from settings - CPR & pivot levels colored in blue lines - All support levels colored in Green - All resistance levels Colored in Red - Day-wise pivot , support & resistance are straight lines - Weekly pivot , support & resistance are cross (+) lines - Weekly pivot , support & resistance are circle (o) lines - SMA , EMA , VWAP and SuperTrend Enabled by Default - SMA Colored in Orange - EMA Colored in Red - EMA Colored in Teal - SuperTrend Colored in standard Red & Green with triangle arrows - Any combinations can be selected from settings-> Inputs & style
Pine Script® 인디케이터
raashidmackrani의
4