지금 시작

스크립트에서 "scalping"에 대해 찾기

[BT] - ScalpMaster [ALERTS] v1Go easy on this script as it's my first, hopefully more to come! ScalpMaster - V1 It's main feature is catch a bull run for volatile markets. Two main selling triggers (CCI and TSSL) with an option to only sell after fees are met (for profit). Built in Statistics and Back-testing I've introduced my own version of backtesting built into the main script. You can disable it if it's too much, just makes it easier to dial the settings in and compare with alert triggering. I've included this on all of my scripts. ***You will get a warning that this script repaints, however you can easily compare alerts against the labels. I'm not entirely sure, but I believe the repainting is due to the Global Stats Label at the end gets repainted to keep in the front. *** Directions Buy: When dialing in the script, watch the purple line above the source, when the current price crosses above this purple line then the buying trigger sets. Sell: TSSL - Trailing Stop / Stop Limit, use available settings to manipulate behavior. It's meant to trail the bull run and sell once the price crosses the bottom tssl bar Sell: CCI - Modify the FastMA and SlowMA settings Sell: P+ - Above won't trigger until you are in the positive after the fees x2 are met. Great to keep your losses minimal. Combine this with a high Stop Loss for great results but might be waiting awhile for a profit.
Pine Script® 인디케이터
bloodtrader의
4
Scalp Master V 1.0The Scalp Master is designed for new and experienced trainers to get a better understanding of sudden direction changes in the cryptocurrencies markets, by displaying just 2 basic signals: "Up" or "Down". It combines the T.A of a group of indicators to give you the most sensitive tool to catch a Pump or Dump before it happens. It also includes one of the most basic and powerful tools to understand how the market is going to behave: Bollinger Bands, if we get an "Up" signal near the lower Bollinger band, we might be close to a good pump and if we get a "Down" signal near the top Bollinger band a dump in the price will most likely happen. Enjoy!!!
Pine Script® 인디케이터
SpideyTrades의
3
TraderTroys 5MMSRTraderTroys 5 Minute Major Support / Resistance Indicator This is to only be used on the 5 minute time frame. It's sole purpose is to reveal up coming major support and resistance. Green = Less reliable Yellow = More reliable Red = Very reliable However, I would recommend back testing this *by applying it to your chart and watching how price action plays with the lines.* I would not recommend only trading based off this indicator, but use it as a form of confluence with others. It's built around multiplications of the average price. Here is a great example of it working:
Pine Script® 인디케이터
The_Paradoxed_Prophet의
[Aill3urs V.1.0.P] Strategy GustaveThis INVIT-ONLY strategy is based on Noise / Fixe TP & SL / EMA and you can optimize it with trends and work on low timeframe < 5min Please use comment section for any feedback. I have also a study with alarms Long Entry / Long Exit / Short Entry / Short Exit For any question DM me for any request. ## DISCLAIMER 1. I am not licensed financial advisors or broker dealers. I do not tell you when or what to buy or sell. I developed this software which enables you execute manual or automated trades multiple trades using TradingView. The software allows you to set the criteria you want for entering and exiting trades. 2. Do not trade with money you cannot afford to lose. 3. I do not guarantee consistent profits or that anyone can make money with no effort. And I am not selling the holy grail. 4. Every system can have winning and losing streaks. 5. Money management plays a large role in the results of your trading. For example: lot size, account size, broker leverage, and broker margin call rules all have an effect on results. Also, your Take Profit and Stop Loss settings for individual pair trades and for overall account equity have a major impact on results. If you are new to trading and do not understand these items, then I recommend you seek education materials to further your knowledge. **YOU NEED TO FIND AND USE THE TRADING SYSTEM THAT WORKS BEST FOR YOU AND YOUR TRADING TOLERANCE.** **I HAVE PROVIDED NOTHING MORE THAN A TOOL WITH OPTIONS FOR YOU TO TRADE WITH THIS PROGRAM ON TRADINGVIEW.**
Pine Script™ 전략
Aill3urs의
Ledgercharts scalp indicatorI'm using this indicator for finding scalp opportunities with high volume crypto coins. To be used in combination with support & resistance levels and/or other indicators. Works best on a 15-minute timeframe. DISCLAIMER: This script is not intended as financial advice and is for educational purposes only. Do your own research by verifying the accuracy of the information and know that your decisions are your own.
Pine Script® 인디케이터
ledgercharts의
7
RSI + OB + Golden Zone + BOS/CHOCH + MTF (v6 Safe) RSI + Order Blocks + Golden Zone + BOS/CHOCH + Inside Bar MTF Strategy A comprehensive smart money trading system that combines multiple institutional trading concepts for high-probability trade setups. ## 🎯 Key Features ### 1. **Market Structure Detection (BOS/CHOCH)** - Automatically identifies Break of Structure (BOS) - significant trend continuation points - Detects Change of Character (CHOCH) - potential trend reversals - Uses pivot-based swing high/low detection with configurable sensitivity (default 5 bars) ### 2. **Order Blocks** - **Current Timeframe Order Blocks**: Green/Red zones marking institutional accumulation/distribution areas - **Multi-Timeframe Order Blocks**: Higher timeframe (default 60min) support/resistance zones - All order blocks extend to the right for ongoing relevance ### 3. **Golden Zone (Fibonacci Retracement)** - Displays 61.8%-65% Fibonacci retracement zones as shaded yellow areas - Identifies optimal entry zones for pullback trades - Straight horizontal lines showing exact price levels ### 4. **RSI Momentum Filter** - 14-period RSI plotted on separate right-side scale - Bullish threshold: 55+ (strong momentum) - Bearish threshold: 45- (weak momentum) - Filters out low-probability trades ### 5. **Inside Bar Pattern Detection** ⭐ NEW - Automatically colors inside bar candles in GOLD - Marks consolidation/indecision patterns - Generates breakout signals when price breaks mother bar high/low - Optional trend alignment filter for higher win rate ## 🔔 Signal Types ### Standard Signals (BUY/SELL) - Trigger: BOS + RSI confirmation - Frequency: Regular - Color: Green/Red labels ### Premium Signals (⭐ BUY/SELL ⭐) - Trigger: BOS + RSI + Price in Golden Zone - Frequency: Rare but high-confidence - Color: Lime/Orange labels with stars ### Inside Bar Signals (IB BUY/SELL) - Trigger: Inside bar breakout above/below mother bar - Optional: Trend alignment required - Color: Gold labels ## ⚙️ Customizable Settings **RSI Settings:** - Length: 14 (default) - Buy/Sell levels: 55/45 (default) **Structure Settings:** - Pivot bars: 5 left/right (default) **Golden Zone Settings:** - Lookback: 20 bars - Fib levels: 61.8%-65% - Toggle visibility **Higher Timeframe:** - Default: 60 minutes - Customizable to any timeframe **Inside Bar Settings:** - Toggle highlighting - Custom color selection - Trend alignment filter - Enable/disable breakout trading **Visual Controls:** - Show/hide BOS markers - Show/hide CHOCH markers - Show/hide Order Blocks - Show/hide Golden Zone - Standard vs Premium signals ## 📊 How to Use 1. **For Trend Traders:** - Wait for BOS in your preferred direction - Look for price to retrace into Golden Zone - Enter when Premium Signal appears 2. **For Breakout Traders:** - Watch for Inside Bar formation (gold candles) - Wait for breakout confirmation - Enter on IB BUY/SELL signal 3. **For Scalpers:** - Use Standard Signals for frequent entries - Trade from Order Block zones - Quick entries on BOS + RSI alignment 4. **Risk Management:** - Place stops below/above Order Blocks - Use mother bar levels for Inside Bar trades - Golden Zone provides optimal entry pricing ## 🎓 Educational Value This indicator teaches: - Smart money concepts (Order Blocks, BOS, CHOCH) - Fibonacci retracement strategies - Inside bar consolidation patterns - Multi-timeframe analysis - Momentum confirmation with RSI ## ⚠️ Disclaimer This indicator is for educational purposes. Always use proper risk management and combine with your own analysis. Past performance does not guarantee future results. ## 🔧 Technical Details - Built with Pine Script v6 - Non-repainting: - Optimized performance with box/label limits - Compatible with all timeframes - Works on all instruments ## 📈 Best Timeframes - **Scalping:** 1min, 5min, 15min - **Intraday:** 15min, 30min, 1H - **Swing:** 4H, Daily - **HTF Setting:** Should be 4-6x higher than chart timeframe ## 🎨 Visual Components - **Gold candles**: Inside bars - **Green boxes**: Bullish order blocks - **Red boxes**: Bearish order blocks - **Yellow zone**: Golden Fibonacci area - **Aqua/Purple boxes**: HTF order blocks - **Small labels**: BOS/CHOCH markers - **Large labels**: Trading signals
Pine Script® 인디케이터
yadav_devesh의
Multi-Timeframe EMA (5 Configurable)Here's a comprehensive description you can use for your indicator: Multi-Timeframe EMA Indicator (5 Configurable Slots) Description This indicator displays up to 5 Exponential Moving Averages (EMAs) from different timeframes simultaneously on a single chart. Perfect for multi-timeframe analysis, it allows traders to visualize key EMAs from intraday to higher timeframes without switching charts. Key Features 5 Independent EMA Slots: Each slot can be configured with its own timeframe, EMA length, and color Flexible Configuration: Mix any timeframes and EMA lengths (e.g., 1m EMA 50, 15m EMA 200, 4h EMA 100) Smart Label Formatting: Automatically displays timeframes in readable format (minutes, hours, or days) Optional Data Table: Toggle a compact table showing EMA values and price distance percentages Individual Toggle Controls: Enable/disable each EMA independently without losing settings Customizable Styling: Adjust colors and line width to match your chart theme Default Configuration EMA 1: 1-minute timeframe, EMA 200 (Red) EMA 2: 5-minute timeframe, EMA 200 (Purple) EMA 3: 15-minute timeframe, EMA 200 (Yellow) EMA 4: 1-hour timeframe, EMA 200 (Blue) EMA 5: 4-hour timeframe, EMA 200 (Orange) How to Use Add the indicator to any chart Configure each EMA slot in the settings: Timeframe: Choose from 1m, 5m, 15m, 1h, 4h, D, W, M, or custom Length: Set the EMA period (default 200) Color: Select a color for easy identification Enable "Show Line Labels" to see EMA identifiers on the right side Enable "Show Values Table" for a detailed view of current values and distances Use Cases Trend Analysis: Identify alignment across multiple timeframes Support/Resistance: Use higher timeframe EMAs as dynamic S/R levels Entry/Exit Timing: Enter on lower timeframe signals near higher timeframe EMAs Multi-Timeframe Confirmation: Validate setups when price is above/below key EMAs Scalping: Monitor 1m/5m EMAs while respecting 1h/4h trend direction Tips All EMAs update in real-time and move with the chart Use contrasting colors for easier visual distinction Disable unused slots to declutter your chart The table shows percentage distance from current price to each EMA Works on any symbol and any chart timeframe
Pine Script® 인디케이터
gbelenguer의
Outside Candle Session Breakout [CHE]Outside Candle Session Breakout Session - anchored HTF levels for clear market-structure and precise breakout context Summary This indicator is a relevant market-structure tool. It anchors the session to the first higher-timeframe bar, then activates only when the second bar forms an outside condition. Price frequently reacts around these anchors, which provides precise breakout context and a clear overview on both lower and higher timeframes. Robustness comes from close-based validation, an adaptive volatility and tick buffer, first-touch enforcement, optional retest, one-signal-per-session, cooldown, and an optional trend filter. Pine version: v6. Overlay: true. Motivation: Why this design? Short-term breakout tools often trigger during noise, duplicate within the same session, or drift when volatility shifts. The core idea is to gate signals behind a meaningful structure event: a first-bar anchor and a subsequent outside bar on the session timeframe. This narrows attention to structurally important breaks while adaptive buffering and debouncing reduce false or mid-run triggers. What’s different vs. standard approaches? Baseline: Simple high-low breaks or fixed buffers without session context. Architecture: Session-anchored first-bar high/low; outside-bar gate; close-based confirmation with an adaptive ATR and tick buffer; first-touch enforcement; optional retest window; one-signal-per-session and cooldown; optional EMA trend and slope filter; higher-timeframe aggregation with lookahead disabled; themeable visuals and a range fill between levels. Practical effect: Cleaner timing at structurally relevant levels, fewer redundant or late triggers, and better multi-timeframe situational awareness. How it works (technical) The chart timeframe is mapped to an analysis timeframe and a session timeframe. The first session bar defines the anchor high and low. The setup becomes active only after the next bar forms an outside range relative to that first bar. While active, the script tracks these anchors and checks for a breakout beyond a buffered threshold, using closing prices or wicks by preference. The buffer scales with volatility and is limited by a minimum tick floor. First-touch enforcement avoids mid-run confirmations. Optional retest requires a pullback to the raw anchor followed by a new close beyond the buffered level within a user window. Optional trend gating uses an EMA on the analysis timeframe, including an optional slope requirement and price-location check. Higher-timeframe data is requested with lookahead disabled. Values can update during a forming higher-timeframe bar; waiting and confirmation mitigate timing shifts. Parameter Guide Enable Long / Enable Short — Direction toggles. Default: true / true. Reduces unwanted side. Wait Candles — Minimum bars after outside confirmation before entries. Default: five. More waiting increases stability. Close-based Breakout — Confirm on candle close beyond buffer. Default: true. For wick sensitivity, disable. ATR Buffer — Enables adaptive volatility buffer. Default: true. ATR Multiplier — Buffer scaling. Default: zero point two. Increase to reduce noise. Ticks Buffer — Minimum buffer in ticks. Default: two. Protects in quiet markets. Cooldown Bars — Blocks new signals after a trigger. Default: three. One Signal per Session — Prevents duplicates within a session. Default: true. Require Retest — Pullback to raw anchor before confirming. Default: false. Retest Window — Bars allowed for retest completion. Default: five. HTF Trend Filter — EMA-based gating. Default: false. EMA Length — EMA period. Default: two hundred. Slope — Require EMA slope direction. Default: true. Price Above/Below EMA — Require price location relative to EMA. Default: true. Show Levels / Highlight Session / Show Signals — Visual controls. Default: true. Color Theme — “Blue-Green” (default), “Monochrome”, “Earth Tones”, “Classic”, “Dark”. Time Period Box — Visibility, size, position, and colors for the info box. (Optional) Reading & Interpretation The two level lines represent the session’s first-bar high and low. The filled band illustrates the active session range. “OUT” marks that the outside condition is confirmed and the setup is live. “LONG” or “SHORT” appears only when the breakout clears buffer, debounce, and optional gates. Background tint indicates sessions where the setup is valid. Alerts fire on confirmed long or short breakout events. Practical Workflows & Combinations Trend-following: Keep close-based validation, ATR buffer near the default, one-signal-per-session enabled; add EMA trend and slope for directional bias. Retest confirmation: Enable retest with a short window to prioritize cleaner continuation after a pullback. Lower-timeframe scalping: Reduce waiting and cooldown slightly; keep a small tick buffer to filter micro-whips. Swing and position context: Increase ATR multiplier and waiting; maintain once-per-session to limit duplicates. Timeframe Tiers and Trader Profiles The script adapts its internal mapping based on the chart timeframe: Under fifteen minutes → Analysis: one minute; Session: sixty minutes. Useful for scalpers and high-frequency intraday reads. Between fifteen and under sixty minutes → Analysis: fifteen minutes; Session: one day. Suits day traders who need intraday alignment to the daily session. Between sixty minutes and under one day → Analysis: sixty minutes; Session: one week. Serves intraday-to-swing transitions and end-of-day planning. Between one day and under one week → Analysis: two hundred forty minutes; Session: two weeks. Fits swing traders who monitor multi-day structure. Between one week and under thirty days → Analysis: one day; Session: three months. Supports position traders seeking quarterly context. Thirty days and above → Analysis: one day; Session: twelve months. Provides a broad annual anchor for macro context. These tiers are designed to keep anchors meaningful across regimes while preserving responsiveness appropriate to the trader profile. Behavior, Constraints & Performance Signals can be validated on closed bars through close-based logic; enabling this reduces intrabar flicker. Higher-timeframe values may evolve during a forming bar; waiting parameters and the outside-bar gate reduce, but do not remove, this effect. Resource footprint is light; the script uses standard indicators and a single higher-timeframe request per stream. Known limits: rare setups during very quiet periods, sensitivity to gaps, and reduced reliability on illiquid symbols. Sensible Defaults & Quick Tuning Start with close-based validation on, ATR buffer on with a multiplier near zero point two, tick buffer two, cooldown three, once-per-session on. Too many flips: increase the ATR multiplier and cooldown; consider enabling the EMA filter and slope. Too sluggish: reduce the ATR multiplier and waiting; disable retest. Choppy conditions: keep close-based validation, increase tick buffer, shorten the retest window. What this indicator is—and isn’t This is a visualization and signal layer for session-anchored breakouts with stability gates. It is not a complete trading system, risk framework, or predictive engine. Combine it with structured analysis, position sizing, and disciplined risk controls. Disclaimer The content provided, including all code and materials, is strictly for educational and informational purposes only. It is not intended as, and should not be interpreted as, financial advice, a recommendation to buy or sell any financial instrument, or an offer of any financial product or service. All strategies, tools, and examples discussed are provided for illustrative purposes to demonstrate coding techniques and the functionality of Pine Script within a trading context. Any results from strategies or tools provided are hypothetical, and past performance is not indicative of future results. Trading and investing involve high risk, including the potential loss of principal, and may not be suitable for all individuals. Before making any trading decisions, please consult with a qualified financial professional to understand the risks involved. By using this script, you acknowledge and agree that any trading decisions are made solely at your discretion and risk. Do not use this indicator on Heikin-Ashi, Renko, Kagi, Point-and-Figure, or Range charts, as these chart types can produce unrealistic results for signal markers and alerts. Best regards and happy trading Chervolino
Pine Script® 인디케이터
chervolino의
Digital RPM HUD — 4 Feeds + Confidence + Timeline (v3)🏎️ Digital RPM HUD — 4 Feeds + Confidence + Timeline (v3) A performance-style trading dashboard for momentum-driven traders. The Digital RPM HUD gives you an instant visual readout of market “engine speed” — combining four customizable data feeds (Trend, Momentum, Volume, Volatility) into a single confidence score (0–100) and a color-coded timeline of regime changes. Think of it as a racing-inspired control panel: you only “hit the throttle” when confidence is high and all systems agree. 🔧 Key Features 4 Data Feeds – assign your own logic (EMA, RSI, RVOL, ATR, etc.). Confidence Meter – blends the four feeds into one smooth 0–100 reading. Timeline Strip – shows recent bullish / bearish / neutral states at a glance. Visual Trade Cues – optional on-chart LONG / SHORT / EXIT markers. Fully Customizable – thresholds, weights, smoothing, colors, layout. HUD Overlay – clean, minimal, and adjustable to any corner of your chart. 💡 How to Use Configure each feed to reflect your preferred signals (e.g., trend EMA 200, momentum RSI 14, volume RVOL 20, volatility ATR 14). Watch the Confidence gauge: ✅ Above Bull Threshold → Market acceleration / long bias. ❌ Below Bear Threshold → Momentum loss / short bias. ⚪ Between thresholds → Neutral zone; stay patient. Use the Timeline to confirm trend consistency — more green = bullish regime, more red = bearish. ⚙️ Recommended Setups Scalping: Trend EMA 50 + RSI 7 + RVOL 10 + ATR 7 → Fast response. Intraday: EMA 200 + RSI 14 + RVOL 20 + ATR 14 → Balanced signal. Swing: Multi-TF Trend + MACD + RVOL + ATR → Smooth and steady. ⚠️ Disclaimer This script is not a trading strategy and does not execute trades. All signals are visual aids — always confirm with your own analysis and risk management.
Pine Script® 인디케이터
pickledness의
RAF@SSET POWER-7 MA SuiteWhat it is A clean, lightweight pack of seven moving averages (1m, 5m, 15m, 1H, 4H, 1D, 1W). HTF lines are confirmed-only (no intra-bar wiggle), so what you see is what closed—no repaint on HTFs. Use it to anchor scalps to higher-timeframe structure without clutter. Why you’ll like it 1m→1W in one look – see alignment from scalp to swing. Confirmed HTFs – uses request.security() with lookahead_off and only plots closed values. Zero fluff – just MAs, fixed colors, ultra-fast. Your presets – default to my “Power-7” lengths (e.g., 233) or set your own. SMA/EMA switch – pick your poison globally. Inputs Show/hide: 1m, 5m, 15m, 1H, 4H, 1D, 1W Length per TF (defaults 233) MA type: SMA / EMA Color per TF How it works (short) Current-TF MA updates live. Higher TF MAs (5m, 15m, 1H, 4H/“240”, 1D, 1W) only update when their candle closes. That removes “wiggle” and surprise shifts. Tips For scalping: trade off LTF, bias from 1H/4H/1D. For swing: let 1D/1W set bias; use 1H/4H for timing. Your current chart TF MA is live (by design). If you want it confirmed too, set your chart to the HTF you care about. Built from my RAF@SSET workflow. Shoutout to everyone who keeps indicators simple and readable. v1.0: First public release (Pine v6). Seven MAs (1m→1W), confirmed HTFs, fixed colors, SMA/EMA toggle.
Pine Script® 인디케이터
Rafaelsilva1의
50% Fib Trend Cloud + ATR BandsThis indicator plots two structural 50% fibonacci midpoints from recent confirmed 'left/right' swings that form a *cloud* of equilibrium, then adds a rolling 50% fibonacci range midpoint based on a lookback window that's wrapped in ATR bands. Importantly, it solves a specific trading problem: Structural midpoints (macro context) are powerful but can lag when price escapes prior ranges. Enter rolling 50% fib + ATR ➡️ which restores real-time balance & tolerance (micro context). Together they show where price is balanced structurally, where it’s balanced right now, and how much volatility to tolerate before acting. ➖➖➖ 🔑 Why this is different Most tools either draw a single midpoint (ex., daily 50%) or ATR bands around a moving average. This script fuses dual swing-based 50% midpoints (structure) + a rolling 50% with ATR (flow), so you don’t lose context when price escapes prior ranges. The cloud tells you who’s in control (fast vs. slow structure). The rolling 50% + ATR tells you how far is “too far” now. ➖➖➖ 🧠 What it does (at a glance) 🔸Structural Equilibrium × 2 (Fib1/Fib2) Two independent 50% midpoints formed from swing pivots (configurable Left/Right bars + optional smoothing). Their gap is the Midpoint Cloud = structural “fair value” zone. 🔸Rolling 50% + ATR Bands A rolling highest/lowest window computes an always-current 50% rolling midpoint plot; ±ATR × length envelopes define a soft value area and over-stretch boundaries. 🔸Actionable Visuals Optional fill between Fib1/Fib2, labels, and candle-overlay modes to instantly read regime (above both / below both / between). 🔸Smart Defaults Timeframe-aware presets for L/R pivots & smoothing; full manual overrides available. ➖➖➖ ⚙️ Calculations (plain-English) 🔸Pivot midpoints (Fib1 & Fib2): 1) Detect a swing using `Left/Right` bars 2) Take the swing’s high/low → compute 50% 3) (Optional) Smooth the line (SMA) to stabilize on noisy TFs 4) Repeat with a different sensitivity to get two distinct midpoints 🔸Rolling midpoint: Highest High / Lowest Low over the last *N* bars → (HH + LL) / 2 🔸ATR levels: `Upper = Rolling50 + ATR × Mult`, `Lower = Rolling50 − ATR × Mult` (Typical: ATR length 14–21; Multipliers 2.236 for L1, 5.382 for L2) ➖➖➖ 🤖 Auto-Configured Presets (with Manual Override) 💡Goal: make the midpoints “just work” on common timeframes while still letting you dial them in. 💡How Auto Presets work When Auto Presets = ON, the script picks sensible L/R/S (Left bars / Right bars / Smoothing) for Fib Trend 1 and Fib Trend 2 based on chart timeframe. 🔸Fib 1 (fast) emphasizes *micro-structure* for quicker bias shifts. 🔸Fib 2 (slow) emphasizes *macro-structure* for anchor/bias context. These defaults keep Fib 1 responsive without jitter and Fib 2 stable without lag. ➡️ Turn Auto Presets = OFF to take full control with the manual inputs described below. ➖➖➖ 🛠 Manual Fib Midpoint Settings (when Auto = OFF) 💡Each midpoint uses three knobs: 🔸Pivot Left (L): bars to the left that must be lower/higher to qualify a swing 🔸Pivot Right (R): bars to the right that must be lower/higher to confirm the swing 🔸Smoothing (S): SMA period applied to the raw 50% midpoint (stabilizes noise) 5-Minute optimized defaults 🔸Fib Trend 1: `L21 / R5 / S55` → responsive local structure (entries/exits, re-balancing zones) 🔸Fib Trend 2: `L55 / R13 / S89` → broader structure (trend context, anchors/stops) Timeframe guidance 🔸1m–3m: may feel a touch laggy → consider ~`L13 / R3 / S34` 🔸15m–1h: defaults remain strong → optionally ~`L34 / R8 / S89` 🔸4h+ : increase span for stability → `L89–144 / R13–21 / S144–233` ➡️ Rule of thumb: shorter L/R = faster detection, longer S = smoother line. Tune until Fib 1 captures the “active swing” and Fib 2 captures the “dominant swing” without whipsaw. ➖➖➖ 🎛 Inputs (quick reference) 🔸Fib Trend 1/2: Source (High/Low/Close), Left/Right bars, Smoothing length, Show/Hide, Cloud fill toggle 🔸Rolling 50%: Lookback length, Price basis (Wicks/Close/HLC3/OHLC4), Plot scope (Full / Last N / None) 🔸ATR Bands: ATR length, Multipliers (L1/L2), Plot scope, Line width/colors 🔸Overlay & Labels: Candle overlay mode, Label padding/size, 50% centerline toggle, Plot widths ➖➖➖ 🖍️ Candle Coloring & Overlay Modes 💡Purpose: make trend instantly visible on the candles and ATR levels. 1) Color Logic (dropdown) 🔸 Fib Midpoints — Colors by position of price vs. Fib 1 & Fib 2 🔸ATR Zones — Colors by which ATR zone price is in relative to the Rolling 50% ➡️ Price Reference: Choose the input used for the decision (Close, HL2, OHLC3, OHLC4). ➡️Tip: Close is crisp; HL2/OHLC variants are smoother. 2) Overlay Style (dropdown) 🔸 None — No visual change to candles 🔸 Bar Color — Uses `barcolor()` to tint built-in candles (this takes into account your Trading View settings, for instance if you have wicks set to white, they will show up as white with this setting) 🔸 PlotCandles — Draws unified custom candles (body, wick, border) with the same color for maximum clarity 💡Practical use 🔸 Pick Fib Midpoints to read structural bias at a glance (above/below/between the cloud). 🔸 Pick ATR Zones to read value vs. stretch around the Rolling 50% (mean-reversion vs. trend extension). ➖➖➖ 📘 How to use A) Trend confirmation - Strong bullish bias when price holds above both structural mids; strong bearish when below both. - Use the Rolling 50% + ATR as a dynamic re-entry zone: pullbacks that respect ATR(L1) often continue the prevailing trend. B) Transition / mean reversion - Inside the Cloud (between Fib1 & Fib2) treat behavior as neutralization/re-balancing; range tactics tend to outperform momentum plays. - In ranges, fades near ±ATR around the rolling 50% can mark short-term edges. C) Breakout context - When price leaves the Cloud, the Rolling 50% keeps you anchored so price never feels “floating.” A clean hold outside ATR(L1/L2) suggests regime strength; quick re-entries hint at traps. ➖➖➖ 🖼 Chart examples ➡️ Each snapshot shows how the Cloud (structure) and the Rolling 50% + ATR (flow) work together. 1) 1-Minute Downtrend – Cloud as Dynamic Ceiling - The Cloud slopes down; pullbacks repeatedly fail under the Cloud’s underside. - Rolling 50% (dashed mid) + ATR(L1) act as a reversion band: rallies stall near upper ATR and rotate lower. 2) 15-Minute Persistent Drift – Structure Guides, Flow Times Entries - Long drift lower with Cloud overhead. - Consolidations near the rolling mid resolve in the trend direction; ATR bands frame risk on each attempt. 3) 15-Minute Uptrend (BTC) – From Cloud Escape to Value Stair-Step - After escaping the prior Cloud, rolling 50% + ATR establish a new higher value area. - Pullbacks into ATR(L1) produce orderly stair-steps; Cloud remains supportive on deeper dips 4) 5-Minute BTC – Pullback to Value then Rotate - Strong leg up; retrace tags lower ATR band and rotates back toward the rolling mid. - Labels (Fib1/Fib2) make the structural context explicit for decision-making. ➖➖➖ 🧪 Starter presets - Intraday (5–15m): Fib1 ~ L21/R5 (smooth 5), Fib2 ~ L55/R13 (smooth 9) • Rolling = 55 • ATR = 14 • L1 = 2.5x, L2 = 5.0x - Scalping: Shorten lookbacks & smoothing; keep ATR multipliers similar, or tighten L1. - Swing: Lengthen all lookbacks; consider ATR length 21–28. ➖➖➖ 🏁Final Word This script is not just a visual tool, it’s a complete trend and structure framework. Whether you're looking for clean trend alignment, dynamic support/resistance, or early warning signs of a reversal, this system is tuned to help you react with confidence — not hindsight. Rembember, no single indicator should be used in isolation. For best results, combine it with price action analysis, higher-timeframe context, and complementary tools like trendlines, moving averages etc Use it as part of a well-rounded trading approach to confirm setups — not to define them alone. --- 💡Turn logic into clarity. Structure into trades. And uncertainty into confidence.
Pine Script® 인디케이터
MYNAMEISBRANDON의
Trend Fib Zone Bounce (TFZB) [KedArc Quant]Description: Trend Fib Zone Bounce (TFZB) trades with the latest confirmed Supply/Demand zone using a single, configurable Fib pullback (0.3/0.5/0.6). Trade only in the direction of the most recent zone and use a single, configurable fib level for pullback entries. • Detects market structure via confirmed swing highs/lows using a rolling window. • Draws Supply/Demand zones (bearish/bullish rectangles) from the latest MSS (CHOCH or BOS) event. • Computes intra zone Fib guide rails and keeps them extended in real time. • Triggers BUY only inside bullish zones and SELL only inside bearish zones when price touches the selected fib and closes back beyond it (bounce confirmation). • Optional labels print BULL/BEAR + fib next to the triangle markers. What it does Finds structure using confirmed swing highs/lows (you choose the confirmation length). Builds the latest zone (bullish = demand, bearish = supply) after a CHOCH/BOS event. Draws intra-zone “guide rails” (Fib lines) and extends them live. Signals only with the trend of that zone: BUY inside a bullish zone when price tags the selected Fib and closes back above it. SELL inside a bearish zone when price tags the selected Fib and closes back below it. Optional labels print BULL/BEAR + Fib next to triangles for quick context Why this is different Most “zone + fib + signal” tools bolt together several indicators, or fire counter-trend signals because they don’t fully respect structure. TFZB is intentionally minimal: Single bias source: the latest confirmed zone defines direction; nothing else overrides it. Single entry rule: one Fib bounce (0.3/0.5/0.6 selectable) inside that zone—no counter-trend trades by design. Clean visuals: you can show only the most recent zone, clamp overlap, and keep just the rails that matter. Deterministic & transparent: every plot/label comes from the code you see—no external series or hidden smoothing How it helps traders Cuts decision noise: you always know the bias and the only entry that matters right now. Forces discipline: if price isn’t inside the active zone, you don’t trade. Adapts to volatility: pick 0.3 in strong trends, 0.5 as the default, 0.6 in chop. Non-repainting zones: swings are confirmed after Structure Length bars, then used to build zones that extend forward (they don’t “teleport” later) How it works (details) *Structure confirmation A swing high/low is only confirmed after Structure Length bars have elapsed; the dot is plotted back on the original bar using offset. Expect a confirmation delay of about Structure Length × timeframe. *Zone creation After a CHOCH/BOS (momentum shift / break of prior swing), TFZB draws the new Supply/Demand zone from the swing anchors and sets it active. *Fib guide rails Inside the active zone TFZB projects up to five Fib lines (defaults: 0.3 / 0.5 / 0.7) and extends them as time passes. *Entry logic (with-trend only) BUY: bar’s low ≤ fib and close > fib inside a bullish zone. SELL: bar’s high ≥ fib and close < fib inside a bearish zone. *Optionally restrict to one signal per zone to avoid over-trading. (Optional) Aggressive confirm-bar entry When do the swing dots print? * The code confirms a swing only after `structureLen` bars have elapsed since that candidate high/low. * On a 5-min chart with `structureLen = 10`, that’s about 50 minutes later. * When the swing confirms, the script plots the dot back on the original bar (via `offset = -structureLen`). So you *see* the dot on the old bar, but it only appears on the chart once the confirming bar arrives. > Practical takeaway: expect swing markers to appear roughly `structureLen × timeframe` later. Zones and signals are built from those confirmed swings. Best timeframe for this Indicator Use the timeframe that matches your holding period and the noise level of the instrument: * Intraday : * 5m or 15m are the sweet spots. * Suggested `structureLen`: * 5m: 10–14 (confirmation delay \~50–70 min) * 15m: 8–10 (confirmation delay \~2–2.5 hours) * Keep Entry Fib at 0.5 to start; try 0.3 in strong trends, 0.6 in chop. * Tip: avoid the first 10–15 minutes after the open; let the initial volatility set the early structure. * Swing/overnight: * 1h or 4h. * `structureLen`: * 1h: 6–10 (6–10 hours confirmation) * 4h: 5–8 (20–32 hours confirmation) * 1m scalping: not recommended here—the confirmation lag relative to the noise makes zones less reliable. Inputs (all groups) Structure • Show Swing Points (structureTog) o Plots small dots on the bar where a swing point is confirmed (offset back by Structure Length). • Structure Length (structureLen) o Lookback used to confirm swing highs/lows and determine local structure. Higher = fewer, stronger swings; lower = more reactive. Zones • Show Last (zoneDispNum) o Maximum number of zones kept on the chart when Display All Zones is off. • Display All Zones (dispAll) o If on, ignores Show Last and keeps all zones/levels. • Zone Display (zoneFilter): Bullish Only / Bearish Only / Both o Filters which zone types are drawn and eligible for signals. • Clean Up Level Overlap (noOverlap) o Prevents fib lines from overlapping when a new zone starts near the previous one (clamps line start/end times for readability). Fib Levels Each row controls whether a fib is drawn and how it looks: • Toggle (f1Tog…f5Tog): Show/hide a given fib line. • Level (f1Lvl…f5Lvl): Numeric ratio in . Defaults active: 0.3, 0.5, 0.7 (0 and 1 off by default). • Line Style (f1Style…f5Style): Solid / Dashed / Dotted. • Bull/Bear Colors (f#BullColor, f#BearColor): Per-fib color in bullish vs bearish zones. Style • Structure Color: Dot color for confirmed swing points. • Bullish Zone Color / Bearish Zone Color: Rectangle fills (transparent by default). Signals • Entry Fib for Signals (entryFibSel): Choose 0.3, 0.5 (default), or 0.6 as the trigger line. • Show Buy/Sell Signals (showSignals): Toggles triangle markers on/off. • One Signal Per Zone (oneSignalPerZone): If on, suppresses additional entries within the same zone after the first trigger. • Show Signal Text Labels (Bull/Bear + Fib) (showSignalLabels): Adds a small label next to each triangle showing zone bias and the fib used (e.g., BULL 0.5 or BEAR 0.3). How TFZB decides signals With trend only: • BUY 1. Latest active zone is bullish. 2. Current bar’s close is inside the zone (between top and bottom). 3. The bar’s low ≤ selected fib and it closes > selected fib (bounce). • SELL 1. Latest active zone is bearish. 2. Current bar’s close is inside the zone. 3. The bar’s high ≥ selected fib and it closes < selected fib. Markers & labels • BUY: triangle up below the bar; optional label “BULL 0.x” above it. • SELL: triangle down above the bar; optional label “BEAR 0.x” below it. Right-Panel Swing Log (Table) What it is A compact, auto-updating log of the most recent Swing High/Low events, printed in the top-right of the chart. It helps you see when a pivot formed, when it was confirmed, and at what price—so you know the earliest bar a zone-based signal could have appeared. Columns Type – Swing High or Swing Low. Date – Calendar date of the swing bar (follows the chart’s timezone). Swing @ – Time of the original swing bar (where the dot is drawn). Confirm @ – Time of the bar that confirmed that swing (≈ Structure Length × timeframe after the swing). This is also the earliest moment a new zone/entry can be considered. Price – The swing price (high for SH, low for SL). Why it’s useful Clarity on repaint/confirmation: shows the natural delay between a swing forming and being usable—no guessing. Planning & journaling: quick reference of today’s pivots and prices for notes/backtesting. Scanning intraday: glance to see if you already have a confirmed zone (and therefore valid fib-bounce entries), or if you’re still waiting. Context for signals: if a fib-bounce triangle appears before the time listed in Confirm @, it’s not a valid trade (you were too early). Settings (Inputs → Logging) Log swing times / Show table – turn the table on/off. Rows to keep – how many recent entries to display. Show labels on swing bar – optional tags on the chart (“Swing High 11:45”, “Confirm SH 14:15”) that match the table. Recommended defaults • Structure Length: 10–20 for intraday; 20–40 for swing. • Entry Fib for Signals: 0.5 to start; try 0.3 in stronger trends and 0.6 in choppier markets. • One Signal Per Zone: ON (prevents over trading). • Zone Display: Both. • Fib Lines: Keep 0.3/0.5/0.7 on; turn on 0 and 1 only if you need anchors. Alerts Two alert conditions are available: • BUY signal – fires when a with trend bullish bounce at the selected fib occurs inside a bullish zone. • SELL signal – fires when a with trend bearish bounce at the selected fib occurs inside a bearish zone. Create alerts from the chart’s Alerts panel and select the desired condition. Use Once Per Bar Close to avoid intrabar flicker. Notes & tips • Swing dots are confirmed only after Structure Length bars, so they plot back in time; zones built from these confirmed swings do not repaint (though they extend as new bars form). • If you don’t see a BUY where you expect one, check: (1) Is the active zone bullish? (2) Did the candle’s low actually pierce the selected fib and close above it? (3) Is One Signal Per Zone suppressing a second entry? • You can hide visual clutter by reducing Show Last to 1–3 while keeping Display All Zones off. Glossary • CHOCH (Change of Character): A shift where price breaks beyond the last opposite swing while local momentum flips. • BOS (Break of Structure): A cleaner break beyond the prior swing level in the current momentum direction. • MSS: Either CHOCH or BOS – any event that spawns a new zone. Extension ideas (optional) • Add fib extensions (1.272 / 1.618) for target lines. • Zone quality score using ATR normalization to filter weak impulses. • HTF filter to only accept zones aligned with a higher timeframe trend. ⚠️ Disclaimer This script is provided for educational purposes only. Past performance does not guarantee future results. Trading involves risk, and users should exercise caution and use proper risk management when applying this strategy.
Pine Script® 인디케이터
kedarcquant의
2
VWAP Momentum Oscillator How It Works Core Calculation Method The oscillator combines four key market measurements into a single, normalized reading: 1. Price-VWAP Deviation: `(Close - VWAP) / VWAP × 100` 2. VWAP-MA Momentum: `(VWAP - MovingAverage) / MovingAverage × 100` 3. Anchored VWAP Strength: Average of high/low anchor deviations from rolling VWAP 4. Range Position: `(Close - PeriodLow) / (PeriodHigh - PeriodLow) × 100 - 50` Dynamic Signal Line The signal line uses an EMA that automatically adjusts its length based on your chart timeframe: - Futures: Always covers 23 hours of trading (1,380 minutes) - Stocks: Always covers 6.5 hours of trading (390 minutes) - Examples: 276 periods on 5-min futures chart, 1,380 periods on 1-min futures chart Trading Signals 🟢 Buy Signals - Condition: Main oscillator crosses above signal line while below zero - Logic: Momentum turning bullish from oversold conditions - Visual: Green "BUY" label below price action 🔴 Sell Signals - Condition: Main oscillator crosses below signal line while above zero - Logic: Momentum turning bearish from overbought conditions - Visual: Red "SELL" label above price action ⚠️ Extreme Warnings - Extreme Overbought: Red triangle when oscillator crosses above +4.0 - Extreme Oversold: Green triangle when oscillator crosses below -4.0 - Purpose: Risk management alerts, not entry/exit signals Oscillator Zones Interpretation Guide - Above +2.0: Strong bullish momentum zone (green background) - 0 to +2.0: Mild bullish territory - 0 to -2.0: Mild bearish territory - Below -2.0: Strong bearish momentum zone (red background) - Above +4.0: Extreme overbought (caution advised) - Below -4.0: Extreme oversold (potential reversal zone) Customization Options Moving Average Settings - EMA/SMA Toggle: Choose between exponential or simple moving average - Color Customization: Adjust MA line color and width Visual Controls - Bullish/Bearish Colors: Customize momentum zone colors - Signal Line: Toggle visibility and adjust color - Line Widths: Control thickness of all plot lines Anchor Modes - NY Session Only: Anchors reset at NY market open (9:30 AM ET) - 24H NY Day: Anchors reset at NY calendar day change (midnight ET) Best Practices Timeframe Selection - Scalping: 1-5 minute charts for quick momentum changes - Day Trading: 5-15 minute charts for clearer trend signals - Swing Trading: 1-4 hour charts for major momentum shifts Signal Confirmation - Wait for crossovers: Don't trade on oscillator position alone - Respect extreme levels: Exercise caution above +4 or below -4 - Use with price action: Combine with support/resistance levels Risk Management - Extreme zones: Reduce position size when oscillator is extended - Failed signals: Exit quickly if momentum doesn't follow through - Market context: Consider overall trend direction and market volatility Technical Specifications Calculation Components - Base Length: 1,380 periods (futures) / 390 periods (stocks) - Signal Line: Dynamic EMA covering one full trading day - Smoothing: 3-period SMA on raw oscillator (adjustable) - Update Frequency: Real-time on every price tick Performance Notes - Resource Efficient: Optimized calculations minimize CPU usage - Memory Friendly: Uses incremental VWAP calculations - Fast Loading: Minimal historical data requirements Version History & Development This oscillator evolved from advanced VWAP overlay strategies, transforming complex multi-line analysis into a single, actionable momentum gauge. The indicator maintains the sophistication of institutional VWAP analysis while providing the clarity needed for retail trading decisions. Core Philosophy Traditional VWAP indicators show where price is relative to volume-weighted averages, but they don't quantify momentum or provide clear entry/exit signals. This oscillator solves that problem by normalizing all VWAP relationships into a single, bounded indicator that works consistently across all timeframes and asset classes. --- Open Source License: This indicator is provided free for the TradingView community. Feel free to modify and enhance according to your trading needs.
Pine Script® 인디케이터
PrestigeWorldwideTradingCo의
Enhanced Chande Momentum OscillatorEnhanced Chande Momentum Oscillator (Enh CMO) 📊 Description The Enhanced Chande Momentum Oscillator is an advanced version of the classic Chande Momentum Oscillator with dynamic envelope boundaries that automatically adapt to market volatility. This indicator provides clear visual signals for potential price reversals and momentum shifts. Key Features: Original Chande Momentum Oscillator calculation Dynamic upper and lower boundaries based on statistical analysis Adaptive envelope that adjusts to market volatility Visual fill area between boundaries for easy interpretation Real-time values table with current readings Built-in alert conditions for boundary touches Customizable moving average types (SMA, EMA, WMA) ⚙️ Settings CMO Settings: CMO Length (9): Period for calculating the base Chande Momentum Oscillator Source (close): Price source for calculations Envelope Settings: Envelope Length (20): Lookback period for calculating the moving average and standard deviation Envelope Multiplier (1.5): Multiplier for standard deviation to create upper/lower bounds Moving Average Type (EMA): Type of moving average for envelope calculation 📈 How to Use Visual Elements Lines: White Line: Main Chande Momentum Oscillator Red Line: Upper boundary (resistance level) Green Line: Lower boundary (support level) Yellow Line: Moving average of CMO (trend direction) Purple Fill: Visual envelope between boundaries Reference Lines: Zero Line: Neutral momentum level +50/-50 Lines: Traditional overbought/oversold levels Trading Signals 🔴 Sell/Short Signals CMO touches or crosses above upper boundary → Potential bearish reversal CMO is above +50 and declining → Weakening bullish momentum CMO crosses below yellow MA line while above zero → Momentum shift 🟢 Buy/Long Signals CMO touches or crosses below lower boundary → Potential bullish reversal CMO is below -50 and rising → Weakening bearish momentum CMO crosses above yellow MA line while below zero → Momentum shift ⚡ Advanced Signals Boundary contraction → Decreasing volatility, potential breakout coming Boundary expansion → High volatility period, use wider stops CMO hugging upper boundary → Strong uptrend continuation CMO hugging lower boundary → Strong downtrend continuation 🎯 Trading Strategies Strategy 1: Reversal Trading Wait for CMO to touch extreme boundaries (red or green lines) Look for divergence with price action Enter counter-trend position when CMO starts moving back toward center Set stop beyond the boundary breach point Take profit near zero line or opposite boundary Strategy 2: Momentum Confirmation Use CMO direction to confirm trend Enter positions when CMO crosses above/below yellow MA line Hold positions while CMO remains on the correct side of MA Exit when CMO crosses back through MA line Strategy 3: Volatility Breakout Monitor boundary width (envelope expansion/contraction) When boundaries contract significantly, prepare for breakout Enter in direction of CMO breakout from narrow range Use boundary expansion as confirmation signal ⚠️ Important Notes Best Timeframes Scalping: 1m, 5m charts Day Trading: 15m, 30m, 1H charts Swing Trading: 4H, Daily charts Market Conditions Trending Markets: Focus on momentum confirmation signals Ranging Markets: Focus on boundary reversal signals High Volatility: Increase envelope multiplier (1.8-2.5) Low Volatility: Decrease envelope multiplier (1.0-1.3) Risk Management Always use stop losses beyond boundary levels Reduce position size during boundary expansion periods Combine with price action and support/resistance levels Monitor the real-time table for precise entry/exit levels 🔔 Alerts The indicator includes built-in alert conditions: "CMO Above Upper Bound": Potential reversal down signal "CMO Below Lower Bound": Potential reversal up signal Set these alerts to catch opportunities without constantly monitoring charts. 💡 Tips for Success Combine with other indicators: Use with RSI, MACD, or volume indicators for confirmation Watch for divergences: CMO making new highs/lows while price doesn't follow Use multiple timeframes: Check higher timeframe CMO for overall trend context Adjust settings for different assets: Crypto may need different settings than forex Paper trade first: Test the indicator with your trading style before using real money 🎨 Customization Tips Change colors in the Pine Script to match your chart theme Adjust envelope length for faster (shorter) or slower (longer) signals Modify envelope multiplier based on asset volatility Hide the table if it obstructs your view by commenting out the table section Complete trading solution: Pair with the Optimus Indicator (paid indicator) for multi-timeframe trend analysis and trend signals. Together they create a powerful confluence system for professional trading setups.
Pine Script® 인디케이터
Jazzman34의
Advanced Grid Trading System - [WOLONG X DBG]Overview This sophisticated grid trading system combines Bollinger Bands breakout analysis with RSI filtering to create a comprehensive automated trading approach. The system implements advanced grid management with dynamic lot sizing, intelligent ATR-based spacing, and comprehensive risk management features including drawdown protection, time-based trading controls, and multi-level position management. Methodology The indicator employs a multi-layered analytical approach based on established technical analysis principles: Core Signal Generation Bollinger Bands Breakout Engine: Utilizes customizable period Bollinger Bands (default 35) with highest/lowest price detection over the calculation period to identify potential reversal points when price breaks below recent lows or above recent highs RSI Confirmation Filter: Implements RSI-based signal filtering with customizable maximum RSI values to avoid entries during overbought/oversold conditions, requiring RSI below (50 - max_rsi_value) for buy signals and above (50 + max_rsi_value) for sell signals Grid Management System: Advanced progressive grid system with configurable pip-based spacing, intelligent ATR-based distance calculation, and cumulative lot sizing with customizable multipliers Advanced Features Dynamic Lot Sizing: Eight calculation methods including Fixed Lot, Dynamic by Balance/Equity, and risk-based percentage approaches (Low Risk 20%, Medium Risk 40%, High Risk 80%, Extreme Risk 120%, Margin Loading) Comprehensive Risk Management: Multi-layered drawdown protection with percentage and absolute value limits, automatic position closure options, and trading suspension features with time-based recovery Time-Based Controls: Configurable GMT-based trading hours with start/stop times for session-specific trading and market condition adaptation Key Components Signal Types Primary Entry Signals: Buy signals when price breaks below recent lowest values within Bollinger period with RSI confirmation; Sell signals when price breaks above recent highest values with RSI confirmation Grid Expansion Logic: Automatic additional entries based on configurable pip distances from base price, triggered when price moves against initial position by specified intervals Take Profit Systems: Dual-mode TP calculation using either weighted average across all positions or individual level TP with customizable pip values Stop Loss Protection: Grid-wide SL with customizable pip distances or default 1000-pip protection Visual Elements Bollinger Bands Display: Three-line Bollinger Bands system with upper, middle (SMA), and lower bands for trend and volatility analysis Grid Base Line: Yellow dashed line showing initial grid entry level with right extension for reference Comprehensive TP/SL Lines: Dual-line system showing both first order reference levels (dotted, light colors) and official Martingale weighted average levels (solid, bold colors) Entry Point Labels: Detailed entry markers showing BUY/SELL direction, grid level, and lot size information Dual Dashboard System: Main control panel (top-right) and dark theme entry log (bottom-right) with real-time status updates Usage Instructions Basic Configuration Capital Management: Select lot calculation method from dropdown (recommended: "Low Risk 20%" for conservative approach) Grid Parameters: Configure trading distance (default 35 pips) and enable smart distance for ATR-based dynamic adjustments Strategy Settings: Set Bollinger period (35), RSI period (20), and maximum RSI value (15) for signal filtering Risk Controls: Configure maximum drawdown percentage and action when limits are exceeded Signal Interpretation Buy Entry Conditions: Generated when current close price breaks below the lowest price in the Bollinger calculation period, with RSI below (50 - max_rsi_value) Sell Entry Conditions: Generated when current close price breaks above the highest price in the Bollinger calculation period, with RSI above (50 + max_rsi_value) Grid Expansion: Automatic additional entries when price moves against position by configured pip distances, with progressive lot sizing using multipliers Exit Conditions: Weighted average TP achievement, breakeven after specified grid levels, or manual cycle completion Dashboard Analysis Main Control Panel: Displays current grid level, trading direction, open orders count, total volume, next lot size, grid P&L, current balance, floating drawdown, RSI status, trading hours, and system locks Dark Theme Entry Log: Shows recent entry history with timestamps, entry types (BUY/SELL), prices, lot sizes, and grid levels for trade tracking Risk Monitoring: Real-time drawdown tracking with color-coded warnings and automatic protection activation Risk Management Features Automatic Protections Drawdown Limits: Configurable percentage (default 100%) and absolute USD drawdown limits with four response options: Close Orders and Stop 24h/Until Restart, or Prevent New Grid/Until Restart Position Sizing: Eight dynamic lot calculation methods based on account equity, balance, or risk tolerance with maximum lot size limits Grid Limitations: Maximum number of grid levels (default 9) to prevent excessive exposure accumulation Time Controls: GMT-based trading hour restrictions to avoid high-volatility periods or specific market sessions Confirmation Requirements Multi-Indicator Alignment: Requires both Bollinger Bands breakout and RSI confirmation before signal generation Intelligent Spacing: ATR-based grid spacing adjustment using short-term (96-period) vs long-term (672-period) ATR ratio for market volatility adaptation Progressive Sizing: Configurable lot multipliers for different grid levels (Order 2: 1.0x, Orders 3-5: 2.0x, Orders 6+: 1.5x default) Optimal Settings Timeframe Recommendations Scalping: 1M-5M charts with reduced grid spacing (20-25 pips) and tighter RSI filters Day Trading: 15M-1H charts with standard settings (35 pips) and default RSI parameters Swing Trading: 4H-Daily charts with increased spacing (50+ pips) and relaxed RSI filters Market Conditions Trending Markets: Reduce RSI maximum value to 10-12, increase grid spacing to 40-50 pips, enable breakeven functionality Ranging Markets: Standard settings with weighted TP enabled and moderate grid spacing High Volatility: Enable smart distance, reduce maximum grid levels to 6-7, increase drawdown limits Advanced Features Customization Options Lot Calculation Methods: Eight different approaches from fixed lot (0.01) to risk-based percentage calculations with margin loading options Grid Multipliers: Separate multiplier settings for different grid levels (2nd order, 3rd-5th orders, 6th+ orders) with decimal precision TP/SL Configuration: Individual or weighted average TP calculation with positive/negative pip values, breakeven after specified levels Visual Controls: Toggle options for dashboard display, entry labels, TP/SL lines, lot information, and dark theme components Technical Specifications Grid Management: Up to 50 configurable grid levels with progressive lot sizing and cumulative position tracking Risk Controls: Dual drawdown limits (percentage and absolute) with four different response actions and time-based recovery Time Management: GMT-based trading hours with flexible start/end times supporting overnight sessions Alert System: Five comprehensive alert conditions for new signals, drawdown warnings, maximum levels, and cycle completion Important Limitations Lagging Nature: Signals may appear after optimal entry points due to confirmation requirements and breakout validation Grid Risk: Progressive lot sizing can lead to significant exposure accumulation during extended adverse price movements Market Dependency: Performance varies significantly between trending and ranging market conditions, requiring parameter adjustments Computational Load: Complex multi-array calculations and real-time dashboard updates may impact performance on slower devices No Guarantee: All signals are suggestions based on technical analysis calculations and may be incorrect Educational Disclaimers This indicator is designed for educational and analytical purposes only. It represents a technical analysis tool based on mathematical calculations of historical price data and should not be considered as financial advice or trading recommendations. Risk Warning: Grid trading involves substantial risk of loss and is not suitable for all investors. The progressive lot sizing methodology can lead to significant exposure accumulation during adverse market movements. Past performance of any trading system or methodology is not necessarily indicative of future results. Important Notes: Always conduct your own analysis before making trading decisions Use appropriate position sizing and risk management strategies Never risk more than you can afford to lose Consider your investment objectives, experience level, and risk tolerance Seek advice from qualified financial professionals when needed Grid trading can result in multiple simultaneous positions with compounding risk exposure Performance Disclaimer: Backtesting results do not guarantee future performance. Market conditions change constantly, and what worked in the past may not work in the future. The indicator's mathematical calculations are based on historical data patterns that may not repeat. Always paper trade new strategies before risking real capital. System Limitations: The indicator relies on technical analysis principles and may produce false signals during unusual market conditions, news events, or periods of extreme volatility. Users should implement additional confirmation methods and maintain strict risk management protocols.
Pine Script® 인디케이터
ionmarpie의
Advanced Trading System - [WOLONG X DBG]Advanced Multi-Timeframe Trading System Overview This technical analysis indicator combines multiple established methodologies to provide traders with market insights across various timeframes. The system integrates SuperTrend analysis, moving average clouds, MACD-based candle coloring, RSI analysis, and multi-timeframe trend detection to suggest potential entry and exit opportunities for both swing and day trading approaches. Methodology The indicator employs a multi-layered analytical approach based on established technical analysis principles: Core Signal Generation SuperTrend Engine: Utilizes adaptive SuperTrend calculations with customizable sensitivity (1-20) combined with SMA confirmation filters to identify potential trend changes and continuations Braid Filter System: Implements moving average filtering using multiple MA types (McGinley Dynamic, EMA, DEMA, TEMA, Hull, Jurik, FRAMA) with percentage-based strength filtering to help reduce false signals Multi-Timeframe Analysis: Analyzes trend conditions across 10 different timeframes (1-minute to Daily) using EMA-based trend detection for broader market context Advanced Features MACD Candle Coloring: Applies dynamic 4-level candle coloring system based on MACD histogram momentum and signal line relationships for visual trend strength assessment RSI Analysis: Identifies potential reversal areas using RSI oversold/overbought conditions with SuperTrend confirmation Take Profit Analysis: Features dual-mode TP detection using statistical slope analysis and Parabolic SAR integration for exit timing analysis Key Components Signal Types Primary Signals: Green ▲ for potential long entries, Red ▼ for potential short entries with trend and SMA alignment Reversal Signals: Small circular indicators for RSI-based counter-trend possibilities Take Profit Markers: X-cross symbols indicating statistical TP analysis zones Pullback Signals: Purple arrows for potential trend continuation entries using Parabolic SAR Visual Elements 8-Layer MA Cloud: Customizable moving average cloud system with 3 color themes for trend visualization Real-Time Dashboard: Multi-timeframe trend analysis table showing bullish/bearish status across all timeframes Dynamic Candle Colors: 4-intensity MACD-based coloring system (ranging from light to strong trend colors) Entry/SL/TP Labels: Automatic calculation and display of suggested entry points, stop losses, and multiple take profit levels Usage Instructions Basic Configuration Sensitivity Setting: Start with default value 6 Increase (7-15) for more frequent signals in volatile markets Decrease (3-5) for higher quality signals in trending markets MA Filter Type: McGinley Dynamic recommended for smoother signals Filter Strength: Set to 80% for balanced filtering, adjust based on market conditions Signal Interpretation Long Entry: Green ▲ suggests when price crosses above SuperTrend with bullish SMA alignment Short Entry: Red ▼ suggests when price crosses below SuperTrend with bearish SMA alignment Reversal Opportunities: Small circles indicate RSI-based counter-trend analysis Take Profit Zones: X-crosses mark statistical TP areas based on slope analysis Dashboard Analysis Green Cells: Bullish trend detected on that timeframe Red Cells: Bearish trend detected on that timeframe Multi-Timeframe Confluence: Look for alignment across multiple timeframes for stronger signal confirmation Risk Management Features Automatic Calculations ATR-Based Stop Loss: Dynamic stop loss calculation using ATR multiplier (default 1.9x) Multiple Take Profit Levels: Three TP targets with 1:1, 1:2, and 1:3 risk-reward ratios Position Sizing Guidance: Entry labels display suggested price levels for order placement Confirmation Requirements Trend Alignment: Requires SuperTrend and SMA confirmation before signal generation Filter Validation: Braid filter must show sufficient strength before signals activate Multi-Timeframe Context: Dashboard provides broader market context for decision making Optimal Settings Timeframe Recommendations Scalping: 1M-5M charts with sensitivity 8-12 Day Trading: 15M-1H charts with sensitivity 6-8 Swing Trading: 4H-Daily charts with sensitivity 4-6 Market Conditions Trending Markets: Reduce sensitivity, increase filter strength Ranging Markets: Increase sensitivity, enable reversal signals High Volatility: Adjust ATR risk factor to 2.0-2.5 Advanced Features Customization Options MA Cloud Periods: 8 customizable periods for cloud layers (default: 2,6,11,18,21,24,28,34) Color Themes: Three professional color schemes plus transparent option Dashboard Position: 9 positioning options with 4 size settings Signal Filtering: Individual toggle controls for each signal type Technical Specifications Moving Average Types: 21 different MA calculations including advanced types (Jurik, FRAMA, VIDA, CMA) Pullback Detection: Parabolic SAR with customizable start, increment, and maximum values Statistical Analysis: Linear regression slope calculation for trend-based TP analysis Important Limitations Lagging Nature: Some signals may appear after potential entry points due to confirmation requirements Ranging Markets: May produce false signals during extended sideways price action High Volatility: Requires parameter adjustment during news events or unusual market conditions Computational Load: Multiple timeframe analysis may impact performance on slower devices No Guarantee: All signals are suggestions based on technical analysis and may be incorrect Educational Disclaimers This indicator is designed for educational and analytical purposes only. It represents a technical analysis tool based on mathematical calculations of historical price data and should not be considered as financial advice or trading recommendations. Risk Warning: Trading involves substantial risk of loss and is not suitable for all investors. Past performance of any trading system or methodology is not necessarily indicative of future results. The high degree of leverage can work against you as well as for you. Important Notes: Always conduct your own analysis before making trading decisions Use appropriate position sizing and risk management strategies Never risk more than you can afford to lose Consider your investment objectives, experience level, and risk tolerance Seek advice from qualified financial professionals when needed Performance Disclaimer: Backtesting results do not guarantee future performance. Market conditions change constantly, and what worked in the past may not work in the future. Always paper trade new strategies before risking real capital.
Pine Script® 인디케이터
ionmarpie의
8
5 Adaptable SMA bandsProfessional-grade technical indicator designed for elite traders who demand precision, visual clarity, and adaptive market analysis. This sophisticated tool revolutionizes traditional Simple Moving Average analysis by transforming thin lines into dynamic, adaptive bands that provide superior trend identification and market structure visualization across all timeframes and asset classes. 🎯 Key Professional Features 5 Fully Configurable SMAs with independent period, color, and width controls 3 Advanced Adaptation Methods: Price Percentage, ATR Adaptive, Dynamic Volatility Institutional-Grade Visual Design with thick, clearly visible bands Real-Time Information Dashboard displaying all active parameters Professional Default Setup: SMA 8 (Green), SMA 20 (Blue), SMA 200 (Red) Precision Band Width Control from 0.05% to 2.0% with 0.05% increments Individual Toggle Control for each moving average Optional Center Lines for exact price level identification 📈 Advanced Adaptation Technology Price Percentage Method: Band width as percentage of SMA value ATR Adaptive Method (Recommended): Automatically adjusts to market volatility using Average True Range Dynamic Volatility Method: Uses standard deviation for high-volatility instruments 💼 Professional Trading Applications Multi-Timeframe Trend Analysis: Identify short, medium, and long-term trends simultaneously Dynamic Support/Resistance Levels: Adaptive bands act as dynamic S/R zones Market Structure Analysis: Visualize trend strength and momentum shifts Entry/Exit Signal Enhancement: Clear visual confirmation of trend changes Risk Management: Better position sizing based on volatility-adjusted bands 🏆 Competitive Advantages Superior Visual Clarity: Thick bands are easier to identify than traditional thin lines Automatic Volatility Adjustment: Adapts to any instrument's characteristics Zoom-Independent Scaling: Maintains visual proportions at any chart zoom level Universal Compatibility: Works flawlessly on Forex, Stocks, Crypto, Commodities, Indices ⚙️ Recommended Professional Setups Scalping: SMAs 8, 20, 50 with ATR Adaptive method Day Trading: SMAs 20, 50, 100 with 0.3-0.5% band width Swing Trading: SMAs 50, 100, 200 with Dynamic Volatility method Position Trading: SMAs 100, 200 with 0.5-0.8% band width
Pine Script® 인디케이터
enriquereanio의