지금 시작

Pricelevels

FOREXSOM | Custom Time High & LowThis indicator plots the high and low of a user-defined intraday candle based on a selected time and timezone. It provides a structured way to observe how price reacts around specific moments during the trading session by marking the range of a chosen candle. How it works The script checks each bar against the selected hour and minute using the chosen timezone. When the specified time occurs, it captures that candle’s high and low and draws horizontal levels on the chart. These levels can optionally extend forward to act as reference levels for the remainder of the trading day. Features Customizable hour and minute selection Timezone input with automatic adjustment High and low levels drawn from the selected candle Optional extension of levels forward Automatic reset at the start of each new trading day Minimal and clean chart output Use cases Identifying the range of session opens (e.g., New York or London) Observing how price interacts with specific intraday candles Creating consistent reference levels for analysis Notes Designed for intraday timeframes The script does not generate trading signals or predictions Levels are based solely on historical price data from the selected candle About this script This script focuses on isolating a single candle in time and displaying its range in a consistent and repeatable way. Its purpose is to simplify the process of tracking specific intraday reference levels without adding unnecessary elements to the chart. Disclaimer This indicator is provided for informational and educational purposes only. It does not constitute financial advice. Users should perform their own analysis before making trading decisions.
Pine Script® 인디케이터
FOREXSOM의
1
Level LinesThis indicator displays levels in close proximity to the current price, enabling users to identify psychological levels on charts that serve as support/resistance zones or key reference points for price action. In the settings, you can customize the number of lines shown above and below the current price, along with the interval size for rendering them. As the price moves higher or lower, the lines dynamically adjust to reflect the most relevant levels. In settings you can fully customize the style of lines (color, width, style) with separate settings available for lines above & below the current price.
Pine Script® 인디케이터
outofoptions의
Custom Buy/Sell Pattern BuilderAre you tired of using trading indicators that only let you follow fixed, pre-designed rules? Do you wish you could build your own “Buy” or “Sell” signals, experiment with your own ideas, or see instantly if your unique pattern works—without learning coding or hiring a developer? The Custom Buy/Sell Pattern Builder is designed for YOU. This TradingView indicator lets ANY trader—even a complete beginner—define exactly what kind of price and volume conditions should create a BUY or SELL label on any chart, in any market, at any timeframe. You don’t need to know programming. You don’t need to know the definition of a hammer, doji, volume spike, or Engulfing pattern. With a few clicks and easy dropdown choices, you can: Make your own rules for buying or selling Choose how many candles your pattern should look at Decide if you want the biggest body, the lowest volume, the biggest movement, or any combination you can imagine The result? You’ll see clear “BUY” or “SELL” labels automatically show up on your chart whenever the exact rule YOU built matches current price action. No more guessing. No more forced strategies. Just pure control and visual feedback! Why Is This Powerful? Traditional indicators (like MACD, RSI, or even classic candlestick scanners) work the same for everyone—and only as their inventors defined. But every trader, and every market, is unique. What if you could say: “Show me a ‘SELL’ every time the newest candle is bigger than the one before, but with LESS volume, while the bar before that had an even smaller body—but more volume than all others?” With this tool, it’s EASY! You simply pick which candle you want to compare (most recent, previous, etc), what to compare (body or volume—body means the candle’s “thickness”, from open to close), choose “greater than”, “less than”, or “equal to”, and set a multiplier if you want (like “half as much”, “twice as big”, etc). After this, if any bar on the chart fits all your rules, it will mark it as a BUY or SELL, depending on your selection. This means— Beginners can start experimenting with their intuition or small ideas, without tech hurdles Experienced traders can visualize and fine-tune any possible logic, before they commit to backtesting or automating a real strategy Every “what if” or “I wonder” setup is just 2–3 clicks away How Does It Work? Simple Steps 1. Choose Your Signal Type “Buy” or “Sell” This tells the indicator whether to mark the qualifying bars with a green “BUY” or red “SELL” label 2. Pick How Many Candles To Use “Pattern Candle Count” input (2, 3, or 4) Example: If you use 4, the pattern will be applied to the most recent 4 candles at every step 3. Define Your Pattern With Inputs For each candle (from newest “0” to oldest “3”), you can set: Body Condition (example: “is this candle’s body bigger/smaller/equal to another?”) Pick which candle to compare against Pick “>”, “<”, “>=”, “<=”, or “=” Set a multiplier if needed (like “0.5” to mean “half as big as” or “2” for “twice as big as”) Volume Condition (exact same choices, but based on trading volume—not the candle’s price body) For example: “Candle0 Body > Candle2 Body” means “the latest candle’s real-body (open–close) is bigger than the one two bars ago.” “Candle1 Volume <= Candle2 Volume” means “the previous candle’s volume is less than or equal to the volume of the bar two periods ago.” You can leave a comparison blank if you don’t want to use it for a particular candle. What Happens After You Set Your Rules? Every bar on your chart is checked for your logic: If ALL body AND volume conditions are true (for each candle you specified), AND The signal side (“Buy” or “Sell”) matches your dropdown, Then a green “BUY” or red “SELL” label will show right on the bar, so you can visually spot exactly where your logic works! Practical Example: Suppose you want an entry setup that is: “Sell whenever the newest candle’s body is bigger than two bars ago, body before that is bigger than three bars ago, AND the newest candle’s volume is less than or equal to two bars ago, AND the candle three bars ago’s volume is less than or equal to half the candle two bars ago’s volume.” You’d set: Pattern Candle Count: 4 Side: Sell Candle0 Body Ref#: 2, Op: >, Mult: 1 Candle1 Body Ref#: 3, Op: >, Mult: 1 Candle0 Vol Ref#: 2, Op: <=, Mult: 1 Candle3 Vol Ref#: 2, Op: <=, Mult: 0.5 And the script will find all “SELL” bars on your chart matching these conditions. Inputs Section: What Does Each Setting Do? Let’s break down each input in the indicator’s Settings one by one, so even if you’re new, you’ll understand exactly how to use it! 1. Pattern Candle Count (2–4) What is it? This sets how many candles in a row you want your rule to look at. Example: “4” means your rules are based on the most recent candle and the 3 before it. “2” means you are only comparing the current and previous candles. Tip: Beginners often use 4 to spot stronger patterns, but you can experiment! 2. Signal Side What is it? Choose “Buy” or “Sell”. The word you pick here decides which colored label (green for Buy, red for Sell) appears if your pattern matches. Example: Want to spot where “Sell” is likely? Pick “Sell”. Change to “Buy” if you want bullish signals instead. 3. Body & Volume Comparison Settings (per Candle) For each candle (#0 is newest/current, #3 is oldest in your pattern window): Body Comparison Candle# Body Ref# Choose which other candle you want to compare this one’s body to. “0” = newest, “1” = previous, “2” = two bars ago, “3” = three bars ago Candle# Body Op (Operator; >, <, >=, <=, =) How do you want to compare? “>” means “greater than” (is bigger than) “<” means “less than” (is smaller than) “=” means “equal to” Candle# Body Mult (Multiplier) If you want relative comparisons. For example, with Mult=1: “Candle0 body > Candle2 body x 1” means just “0 is larger than 2.” “Candle0 body > Candle2 body x 2” means “0 is more than double 2.” Volume Comparison Candle# Vol Ref# / Op / Mult Exact same logic as body, but works on the “Volume” of each candle (how much was traded during that bar). How to Set Up a Rule (Step by Step Example) Say you want to mark a Sell every time: The most recent candle’s real body is BIGGER than the candle 2 bars ago; The previous candle’s body is also BIGGER than the candle 3 bars ago; The current candle’s volume is LESS than or equal to the volume of candle 2; The previous candle’s volume is LESS than or equal to candle 2’s volume; The candle 3 bars ago’s volume is LESS than or equal to HALF candle 2’s volume. You’d set: Pattern Candle Count: 4 Side: "Sell" Candle0 Body Ref#: 2, Op: “>”, Mult: 1 Candle1 Body Ref#: 3, Op: “>”, Mult: 1 Candle0 Vol Ref#: 2, Op: “<=”, Mult: 1 Candle1 Vol Ref#: 2, Op: “<=”, Mult: 1 Candle3 Vol Ref#: 2, Op: “<=”, Mult: 0.5 All other comparisons (operators) can be left blank if you don’t want to use them! When these rules are met, a bright red “SELL” label will appear right above the bar matching all your conditions. Practical Tips & FAQ for Beginners What does “body” mean? It’s the “true range” of the candle: the difference between open and close. This ignores wicks for simple setups. What does “volume” mean? This is the total trading activity during that candle/bar. Many traders believe that patterns with different volume “meaning” (such as low-volume up bars, or high-volume down bars) signal a meaningful change. What if nothing shows on chart? It just means your current rules are rarely or never matched! Try making your comparisons simpler (maybe just 2-body and 2-volume conditions to start). You can always hit “Reset Settings” to go back to default. Can I use this for both buying and selling? YES! You can detect both bullish (Buy) and bearish (Sell) custom conditions; just switch “Signal Side.” Do I need to know coding? Not at all! Everything is in simple input panels. Creative Use Cases, Example Recipes & Troubleshooting Creative Ways to Use Spotting Reversals Example: Buy when: the newest candle body is LARGER than the previous 3 bars, but ALL volumes are lower than their neighbors. Why? Sometimes, a big candle with surprisingly low volume after a sequence of small bars can signal a reversal. Finding Exhaustion Moves Example: Sell when: the current bar body is twice as big as two bars ago, but volume is half. Why? A very big candle with very little volume compared to similar bars may show the move is “running out of steam.” Custom “Breakout + Confirmation” Patterns Example: Buy when: Candle 0’s body is greater than Candle 2’s by at least 1.5x, Candle 0’s volume is greater than Candle 1 and Candle 2, Candle 1’s volume is less than Candle 0. Why? This could catch strong breakouts but filter out noisy moves. Multi-bar Bias/Squeeze Filter Use “Pattern Candle Count: 4” Set all 4 volume conditions to “<” and each reference to the previous candle. Now, a BUY or SELL only marks when each bar is “dryer”/less active than the last — a classic squeeze or low-volatility buildup. Troubleshooting Guide “I don’t see any Buy/Sell label; is something broken?” Most likely, your rules are too strict or rare! Try using only two comparisons and leave other “Op” inputs blank as a test. Double-check you have enough candles on the chart: you need at least as many bars as your pattern count. “Why does a label appear but not where I expect?” Remember, the script checks your rules for every NEW candle. The candle “0” is always the most recent, then “1” is one bar back, etc. Check the color and type chosen: “Signal Side” must be “Buy” for green, “Sell” for red. “What if I want a more complex pattern?” Stack conditions! You can demand the body/volume of each candle in your window meet a different rule or all follow the same rule in sequence. Mini Glossary — For Newcomers Candle/Bar: Each bar on the chart, shows price movement during a fixed time (e.g., one minute, one hour, one day). Body: The colored (or filled) part of the candle — the open-to-close price range. Volume: How much of the asset was actually traded that candle/bar. Reference Index: When you pick “2” as a reference, it means “the candle two bars ago in the pattern window.” Operator (“Op”): The math symbol used to compare (>, <, =, etc). Signal Side: Whether you want to highlight bullish (“Buy”) or bearish (“Sell”) bars. Tips for Getting More Value Start Simple—try just one or two conditions at first. See what lights up. Slowly add more logic as you get comfortable. Watch the chart live as you change settings. The labels update instantly—this makes strategy design fast and visual! Try flipping your ideas: If a certain pattern doesn’t work for buys, try reversing the direction for possible “sell” setups. Remember: There is NO wrong idea. This indicator is only limited by your creativity—it’s a “strategy playground.” Example Quick-Start Recipes Classic Sell: 4 candles, side = Sell Candle0 Body > Candle2; Candle1 Body > Candle3 Candle0 Vol <= Candle2; Candle1 Vol <= Candle2; Candle3 Vol <= Candle2 × 0.5 Simple Buy After Pause: 3 candles, side = Buy Candle0 Body > Candle1; Candle0 Vol > Candle1 All other Ops blank Low-Volume Pullback for Entry: 4 candles, side = Buy Candle0 Body > Candle2 Candle0 Vol < Candle1; Candle1 Vol < Candle2; Candle2 Vol < Candle3 Final Words Think of this as your “pattern lab.” No code, no guesswork—just experiment, see what the market actually gives, and design your own visual rulebook. If you’re stuck, reset the script to defaults—it’s always safe to start again! If you want more ready-made “recipes” for different strategies/styles, just ask and I’ll send some more setups for you. Happy building—and may your edge always be YOUR edge!
Pine Script® 인디케이터
cnagda3의
Low Liquidity Zones [PhenLabs]📊 Low Liquidity Zones Version: PineScript™ v6 📌 Description Low Liquidity Zones identifies and highlights periods of unusually low trading volume on your chart, marking areas where price movement occurred with minimal participation. These zones often represent potential support and resistance levels that may be more susceptible to price breakouts or reversals when revisited with higher volume. Unlike traditional volume analysis tools that focus on high volume spikes, this indicator specializes in detecting low liquidity areas where price moved with minimal resistance. Each zone displays its volume delta, providing insight into buying vs. selling pressure during these thin liquidity periods. This combination of low volume detection and delta analysis helps traders identify potential price inefficiencies and weak structures in the market. 🚀 Points of Innovation • Identifies low liquidity zones that most volume indicators overlook but which often become significant technical levels • Displays volume delta within each zone, showing net buying/selling pressure during low liquidity periods • Dynamically adjusts to different timeframes, allowing analysis across multiple time horizons • Filters zones by maximum size percentage to focus only on precise price levels • Maintains historical zones until they expire based on your lookback settings, creating a cumulative map of potential support/resistance areas 🔧 Core Components • Low Volume Detection: Identifies candles where volume falls below a specified threshold relative to recent average volume, highlighting potential liquidity gaps. • Volume Delta Analysis: Calculates and displays the net buying/selling pressure within each low liquidity zone, providing insight into the directional bias during low participation periods. • Dynamic Timeframe Adjustment: Automatically scales analysis periods to match your selected timeframe preference, ensuring consistent identification of low liquidity zones regardless of chart settings. • Zone Management System: Creates, tracks, and expires low liquidity zones based on your configured settings, maintaining visual clarity on the chart. 🔥 Key Features • Low Volume Identification: Automatically detects and highlights candles where volume falls below your specified threshold compared to the moving average. • Volume Delta Visualization: Shows the net volume delta within each zone, providing insight into whether buyers or sellers were dominant despite the low overall volume. • Flexible Timeframe Analysis: Analyze low liquidity zones across multiple predefined timeframes or use a custom lookback period specific to your trading style. • Zone Size Filtering: Filters out excessively large zones to focus only on precise price levels, improving signal quality. • Automatic Zone Expiration: Older zones are automatically removed after your specified lookback period to maintain a clean, relevant chart display. 🎨 Visualization • Volume Delta Labels: Each zone displays its volume delta with “+” or “-” prefix and K/M suffix for easy interpretation, showing the strength and direction of pressure during the low volume period. • Persistent Historical Mapping: Zones remain visible for your specified lookback period, creating a cumulative map of potential support and resistance levels forming under low liquidity conditions. 📖 Usage Guidelines Analysis Timeframe Default: 1D Range/Options: 15M, 1HR, 3HR, 4HR, 8HR, 16HR, 1D, 3D, 5D, 1W, Custom Description: Determines the historical period to analyze for low liquidity zones. Shorter timeframes provide more recent data while longer timeframes offer a more comprehensive view of significant zones. Use Custom option with the setting below for precise control. Custom Period (Bars) Default: 1000 Range: 1+ Description: Number of bars to analyze when using Custom timeframe option. Higher values show more historical zones but may impact performance. Volume Analysis Volume Threshold Divisor Default: 0.5 Range: 0.1-1.0 Description: Maximum volume relative to average to identify low volume zones. Example: 0.5 means volume must be below 50% of the average to qualify as low volume. Lower values create more selective zones while higher values identify more zones. Volume MA Length Default: 15 Range: 1+ Description: Period length for volume moving average calculation. Shorter periods make the indicator more responsive to recent volume changes, while longer periods provide a more stable baseline. Zone Settings Zone Fill Color Default: #2196F3 (80% transparency) Description: Color and transparency of the low liquidity zones. Choose colors that stand out against your chart background without obscuring price action. Maximum Zone Size % Default: 0.5 Range: 0.1+ Description: Maximum allowed height of a zone as percentage of price. Larger zones are filtered out. Lower values create more precise zones focusing on tight price ranges. Display Options Show Volume Delta Default: true Description: Toggles the display of volume delta within each zone. Enabling this provides additional insight into buying vs. selling pressure during low volume periods. Delta Text Position Default: Right Options: Left, Center, Right Description: Controls the horizontal alignment of the delta text within zones. Adjust based on your chart layout for optimal readability. ✅ Best Use Cases • Identifying potential support and resistance levels that formed during periods of thin liquidity • Spotting price inefficiencies where larger players may have moved price with minimal volume • Finding low-volume consolidation areas that may serve as breakout or reversal zones when revisited • Locating potential stop-hunting zones where price moved on minimal participation • Complementing traditional support/resistance analysis with volume context ⚠️ Limitations • Requires volume data to function; will not work on symbols where the data provider doesn’t supply volume information • Low volume zones don’t guarantee future support/resistance - they simply highlight potential areas of interest • Works best on liquid instruments where volume data has meaningful fluctuations • Historical analysis is limited by the maximum allowed box count (500) in TradingView • Volume delta in some markets may not perfectly reflect buying vs. selling pressure due to data limitations 💡 What Makes This Unique • Focus on Low Volume: Unlike some indicators that highlight high volume events particularly like our very own TLZ indicator, this tool specifically identifies potentially significant price zones that formed with minimal participation. • Delta + Low Volume Integration: Combines volume delta analysis with low volume detection to reveal directional bias during thin liquidity periods. • Flexible Lookback System: The dynamic timeframe system allows analysis across any timeframe while maintaining consistent zone identification criteria. • Support/Resistance Zone Generation: Automatically builds a visual map of potential technical levels based on volume behavior rather than just price patterns. 🔬 How It Works 1. Volume Baseline Calculation: The indicator calculates a moving average of volume over your specified period to establish a baseline for normal market participation. This adaptive baseline accounts for natural volume fluctuations across different market conditions. 2. Low Volume Detection: Each candle’s volume is compared to the moving average and flagged when it falls below your threshold divisor. The indicator also filters zones by maximum size to ensure only precise price levels are highlighted. 3. Volume Delta Integration: For each identified low volume candle, the indicator retrieves the volume delta from a lower timeframe. This delta value is formatted with appropriate scaling (K/M) and displayed within the zone. 4. Zone Management: New zones are created and tracked in a dynamic array, with each zone extending rightward until it expires. The system automatically removes expired zones based on your lookback period to maintain a clean chart. 💡 Note: Low liquidity zones often represent areas where price moved with minimal participation, which can indicate potential market inefficiencies. These zones frequently become important support/resistance levels when revisited, especially if approached with higher volume. Consider using this indicator alongside traditional technical analysis tools for comprehensive market context. For best results, experiment with different volume threshold settings based on the specific instrument’s typical volume patterns.
Pine Script® 인디케이터
PhenLabs의
2
Clean OHLC Lines | BaksPlots clean, non-repainting OHLC lines from higher timeframes onto your chart. Ideal for tracking key price levels (open, high, low, close) with precision and minimal clutter. Core Functionality Clean OHLC Lines = Historical Levels + Non-Repainting Logic • Uses lookahead=on to anchor historical lines, ensuring no repainting. • Displays OHLC lines for customizable timeframes (15min to Monthly). • Optional candlestick boxes for visual context. Key Features • Multi-Timeframe OHLC: Plot lines from 15min, 30min, 1H, 4H, Daily, Weekly, or Monthly timeframes. • Non-Repainting Logic: Historical lines remain static and never recalculate. • Customizable Styles: Adjust colors, line widths (1px-4px), and transparency for high/low/open/close lines. • Candle Display: Toggle candlestick boxes with bull/bear colors and adjustable borders. • Past Lines Limit: Control how many historical lines are displayed (1-500 bars). User Inputs • Timeframe: Select the OHLC timeframe (e.g., "D" for daily). • # Past Lines: Limit historical lines to avoid overcrowding (default: 10). • H/L Mode: Draw high/low lines from the current or previous period. • O/C Mode: Anchor open/close lines to today’s open or yesterday’s close. • Line Styles: Customize colors, transparency, and styles (solid/dotted/dashed). • Candle Display: Toggle boxes/wicks and adjust bull/bear colors. Important Notes ⚠️ Alignment: • Monthly/weekly timeframes use fixed approximations (30d/7d). • For accuracy, ensure your chart’s timeframe ≤ the selected OHLC timeframe (e.g., use 1H chart for daily lines). ⚠️ Performance: • Reduce # Past Lines on low-end devices for smoother performance. Risk Disclaimer Trading involves risk. OHLC lines reflect historical price levels and do not predict future behavior. Use with other tools and risk management. Open-Source Notice This script is open-source under the Mozilla Public License 2.0. Modify or improve it freely, but republishing must follow TradingView’s House Rules. 📈 Happy trading!
Pine Script® 인디케이터
TrDrBAKS의
11
Static price-range projection by symbolThis indicator shows you a predefined range to the right of the last candle of your chart. This range is custom and can be changed for a handful of symbols that you can choose. This scale will help you determining if the market is providing a reasonable range before you enter a trade or if the market isn't actually moving as much as you might think. This is particularly useful if you are into scalping and have to consider commission or spread in your trades. Since all symbols have different price ranges in which they move this indicator doesn't make sense to just have "a one size fits all" approach. That's why you can choose up to 6 symbols and set the range that you want to have shown for each when you pull it up on the chart. Using my default values that means for when the NQ (Nasdaq future) is on the chart you will see a range of 20 handles projected. When you change the the ES (S&P500 future) you will instead see 5 handles. While the number is different that is somewhat of an equal move in both symbols. There also is an option to set a default price range for all other symbols that are not selected if it is needed. However the display of the scale on anything else than the 6 selected symbols can also be turned off. There are options provided on how exactly you want to indicator to determine if the chart symbol matches one of the selected symbols. You can enable it to make sure the exchange/broker is the exact same as selected. It can check for only the symbol root to match the selection. Specifically for futures this means that while ES1! might be selected, anything ES (ES1!, ES2!, ESH2025, ESM2025, ESM2022, ...) will be a match to the selection) On the painted scale it is possible to not just show this range extended into each direction once. Per default you will have 3 segments of it in each direction. This can be reduced to just 1 or increased. If you chose a high number of segments or a large range make sure to use the "Scale price chart only" option on your chart scale to not have the symbols price candles squished together by the charts auto scaling. And last but not least the indicator options provide some possibilities to change the appearance of the printed price range scale in case you disagree with my design.
Pine Script® 인디케이터
Remote-Trading의
Dynamic Support and Resistance Pivot Strategy The Dynamic Support and Resistance Pivot Strategy is a flexible and adaptive tool designed to identify short-term support and resistance levels using the concept of price pivots. ### Key Elements of the Strategy 1. Pivot points as support and resistance levels Pivots are significant turning points on the price chart, often marking local highs and lows where the price has reversed direction. A pivot high occurs when the price forms a local peak, while a pivot low occurs when the price forms a local trough. When a new pivot high is formed, it creates a resistance level. Conversely, when a new pivot low is formed, it creates a support level. The strategy continuously updates these levels as new pivots are detected, ensuring they remain relevant to the current market conditions. By identifying these price levels, the strategy dynamically adjusts to market conditions, allowing it to adapt to both trending and ranging markets, since it has a long target and can perform reversal operations. 2. Entry Criteria - Buy (Long): A long position is triggered when the price is near the support level and then crosses it from below to above. This suggests that the price has found support and may start moving upwards. - Sell (Short): A short position is triggered when the price is near the resistance level and then crosses it from above to below. This indicates that the price may be reversing and moving downward. 3. Support/Resistance distance (%) - This parameter establishes a percentage range around the identified support and resistance level. For example, if the Support Resistance Distance is 0.4% (default), the closing price must be within a range of 0.4% above support or below the resistance to be considered "close" and trigger a trade. 4. Exit criteria - Take profit = 27 % - Stop loss = 10 % - Reversal if a new entry point is identified in the opposite direction 5. No Repainting - The Dynamic Support and Resistance Pivot Strategy is not subject to repainting. 6. Position Sizing by Equity and risk management - This strategy has a default configuration to operate with 35% of the equity. The stop loss is set to 10% from the entry price. This way, the strategy is putting at risk about 10% of 35% of equity, that is, around 3.5% of equity for each trade. The percentage of equity and stop loss can be adjusted by the user according to their risk management. 7. Backtest results - This strategy was subjected to backtest and operations in replay mode on **1000000MOGUSDT.P**, with the inclusion of transaction fees at 0.12% and slipagge of 5 ticks, and the past results have shown consistent profitability. Past results are no guarantee of future results. The strategy's backtest results may even be due to overfitting with past data. 8. Chart Visualization - Support and resistance levels are displayed as green (support) and red (resistance) lines. - Pivot prices are displayed as green (pivot low) and red (pivot high) labels. In this image above, the Support/Resistance distance (%) parameter was set to 0.8. 9. Default Configuration Chart Timeframe: 1h Pivot Lengh: 2 Support/Resistance distance (%): 0.4* Stop Loss: 10 % Take Profit: 27 % * This parameter can alternatively be set to 0.8. 10. Alternative Configuration Chart Timeframe: 20 min Pivot Lengh: 4 Support/Resistance distance (%): 0.1 Stop Loss: 10 % Take Profit: 25 % BYBIT:1000000MOGUSDT.P
Pine Script™ 전략
felipemiransan의
4
High/Mid/Low of the Previous Month, Week and Day + MAIntroducing the Ultimate Price Action Indicator Take your trading to the next level with this feature-packed indicators. Designed to provide key price insights, this tool offers: - Monthly, Weekly, and Daily Levels : Displays the High, Midpoint, and Low of the previous month, week, and day. - Logarithmic Price Lines : Option to plot price levels logarithmically for enhanced accuracy. - Customizable Labels : Display labels on price lines for better clarity. (This feature is optional.) - Dual Moving Averages : Add two customizable Moving Averages (Simple, Exponential, or Weighted) directly on the price chart. (This feature is optional.) This code combines features from the Moving Average Exponential and Daily Weekly Monthly Highs & Lows (sbtnc) indicators, with custom modifications to implement unique personal ideas. Perfect for traders who want to combine precision with simplicity. Whether you're analyzing historical levels or integrating moving averages into your strategy, this indicator provides everything you need for informed decision-making. To prevent change chart scale, right click on Price Scale and enable "Scale price chart only"
Pine Script® 인디케이터
soltanifx의
7
Delayed Opening Price Line with GuardrailsThis Delayed Opening Price Line with Guardrails indicator will draw 5 price level lines on the chart each day, beginning at the open of the first candle after a delay period specified by the user in the indicator settings. The default delay is 30 minutes from market open. The lines are drawn at the open price of the first candle after the delay period, and then a specified increment above and below that price level. These increments default to 80 and 100, and can be adjusted in the indicator settings. Most markets, indices, and equities have a finite and consistent range of price movement within a trading day. Eg. a particular stock may usually move no more that $50 up or down in a given day, which can be proven by looking at a historical chart. This indicator allows the user to quickly display that range on the chart once it's been defined. Important note: This indicator is designed to be used on an intra-day chart - eg. minutes, or hourly. It will give an error if used on a longer time-frame chart.
Pine Script® 인디케이터
IICapital의
7
Last Candle OHLC (Ticks or Points)What the Code Does 1. **Draws Lines and Labels**: - It draws lines on your chart to show the high, low, open, and close prices from the previous period (like the previous day or week). - It also labels these lines with numbers that tell you how far the current price is from these levels. 2. **Shows Price Movement**: - You can see how far the price has moved from these levels in terms of small price changes (ticks) or larger units (points). - This helps you understand price movements and potential levels of support or resistance. 3. **Customizable**: - You can choose whether to show these lines and labels, and you can select if you want to see the movement in ticks or points. - The lines can extend into the future on your chart to help you anticipate where prices might be in the coming days. ### How It’s Useful: 1. **Identify Key Levels**: - It helps you spot important price levels from past periods, which can act as support or resistance. 2. **Understand Price Movement**: - You get a visual sense of how much the price has moved from key levels, which can help you gauge market volatility. 3. **Plan Trades**: - By seeing where the price has been and how it has moved, you can better plan your trades, like deciding where to enter or exit based on these levels. 4. **Flexible for Different Markets**: - It works across various markets, like stocks, futures, and forex, adjusting to the specific characteristics of each instrument. In short, this tool helps you visualize and understand past price movements and levels on your chart, aiding in your trading decisions.
Pine Script® 인디케이터
teebala786의
1
QQQ NDX NQ Price Converter [Pt]A must have tool for QQQ NDX NQ traders~!!! Description The QQQ NDX NQ Price Converter is a powerful and easy-to-use tool that allows traders to view corresponding price levels for linked instruments in real-time. This includes QQQ, NDX, NQ, and NAS100USD. Although these instruments often move in sync, differences in price movements, volume, and trading hours can create unique key levels and support/resistance areas for each. By mapping these levels on the same chart, traders can more easily spot trading opportunities and improve their chances of success. Customizable features - multiplier from the closest whole number price level - line color - line style - label position / size - # of levels to display - toggle current price display table
Pine Script® 인디케이터
PtGambler의
13
SPY SPX ES Price Converter [Pt]A must have tool for SPY SPX ES traders~!!! Description The SPY SPX ES Price Converter is a powerful and easy-to-use tool that allows traders to view corresponding price levels for linked instruments in real-time. This includes SPY, SPX, ES, and SPX500USD. Although these instruments often move in sync, differences in price movements, volume, and trading hours can create unique key levels and support/resistance areas for each. By mapping these levels on the same chart, traders can more easily spot trading opportunities and improve their chances of success. Customizable features - multiplier from the closest whole number price level - line color - line style - label position / size - # of levels to display - toggle current price display table
Pine Script® 인디케이터
PtGambler의
26
+ ATR Support and ResistanceThis, a very different script from most of mine, is my attempt at making a useful, and not messy, support and resistance indicator. If you've never looked into trader xkavalis, and his scripts and discord, I would highly recommend it. He talks about "pay attention candles" a lot. It got me thinking about what those are. Best as I can tell all he means by that phrase is large, impulsive candles. Sometimes these lead to break outs of ranges, or they may signal tops, bottoms, or near-tops and bottoms. The only way I could make sense of this in a mathematical way was by using the average true range. Basically, any candle's true range outside of the ATR is considered a "pay attention candle," by my definition. This script originally began as just a candle coloring exercise with some optional shapes plotted above/below certain candles, but I quickly realized I wanted to draw lines or zones from these candles, so eventually, after many hours spent figuring out and learning 'line.new' and 'box.new' I got things sorted. Essentially, my line of thinking is that on impulsive candles down, the origin of the impulse is more important than the close (not always of course, as there are no unbreakable rules in what markets can do), and with impulsive candles up, the same theory applies. So, for upward impulsive candles I've marked out the zone from the open to the low as a support (until broken, in which case it may become resistance). For downward impulsive candles the zone encompasses the open to the high. I've given the option to plot a line from the close for all of these. It's turned off by default as it's just less stuff on the chart, but you may like it. The line length is customizable in a menu. It does funny things on low timeframes on forex and stock charts (long lines that result in chart compression), but for some reason very rarely on crypto charts. If someone who is smart (not me) and has much experience with pinescript could perhaps help me out with a fix for this, that would be great. I suspect it has something to do with my "bar_index_duration" that I defined using the time function, but I'm not sure how or why. Line length on time frames of one hour and up it is typically fine. Use the ATR multiple to change the sensitivity of the indicator. This is basically the determination of when a candle is beyond the ATR. A multiple of two is two times the ATR. With lower volatile pairs you can maybe make this lower. On lower time frames or with more volatile pairs (illiquid alts in particular) a higher multiple might serve better. I find the default 1.75 is mostly acceptable. As I started this I also thought adding some sort of volume information to the candles might be useful as well, so I added a simple candle coloring feature referencing the OBV and a 21 period EMA. Candles are colored based on the OBV's relation to its moving average. I added some plot shapes and candle coloring utilizing the RSI as well. Options to turn on or off shapes plotted for overbought and oversold across the top of the chart. The most interesting feature that I implemented here is a support/resistance zone around the centerline of the RSI. If the RSI is between 49 and 51 then you can have optional candle coloring, shapes plotted above the candles, and s/r zones drawn on the chart. In trending markets the centerline of the RSI will frequetly act as support or resistance, so by being alerted of this condition on the chart you can use that with actual levels marked off in order to help make a judgement on a trade. I think it's a nice addition, and an oft overlooked aspect of the usefulness of the RSI. I've also included a calculation, with candle coloring and/or plot shapes, for something like a stop run on high volume. The calculation for that is in its section below, and should be pretty self explanatory. Lastly, typing this as I'm posting it, this indicator could also be useful for helping to find placement for trailing a stop. Just a thought!
Pine Script® 인디케이터
ClassicScott의
29