지금 시작

Priceactionanalysis

Structure Decision Engine [AlgoPoint]Structure Decision Engine uses a dual-layer market structure framework to detect Break of Structure (BOS), Change of Character (CHoCH), and liquidity sweeps — then evaluates every signal through a multi-factor quality engine that assigns a Trade Permission (ON/OFF). Unlike basic structure indicators that only draw lines, this engine thinks like a trader: is the structure aligned? Is the HTF bias confirming? Are we in premium or discount? Was there a recent liquidity sweep? Each factor contributes to a 0-100 Quality Score, and only setups above the threshold get trade permission. 🔹 THREE VISUAL MODES Decision — Clean view showing only active trade signals, Decision Card dashboard, and structure zones. Minimal noise. Analysis — Full structure view with BOS/CHoCH markers, liquidity sweep labels (BSL/SSL), external levels, and Premium/Discount cloud. Debug — Every internal and external swing labeled. All levels visible. Use this to tune the lookback and filter parameters to your asset. 🔹 DUAL-LAYER STRUCTURE Internal Structure — Short-term swing highs/lows with configurable lookback. Detects BOS and CHoCH for entry timing. External Structure — Longer-term swing points defining the macro trend. Provides bias context and Premium/Discount range. 🔹 QUALITY ENGINE (0-100) Each signal is scored on 7 dimensions: • Body Ratio — how decisive is the breakout candle • Displacement — how far did price close beyond the structure level • Volume Confirmation — was volume elevated at the break • Sweep Recency — was there a liquidity sweep before the break • Structure Alignment — does the signal agree with external trend • HTF Bias — does the higher timeframe EMA confirm direction • Zone Position — is price in Premium (sell) or Discount (buy) zone Grade scale: 85+ = A+, 75+ = A, 65+ = B, 50+ = C, below = D. 🔹 TRADE PERMISSION Signals receive ON (take the trade) or OFF (stand aside) based on quality threshold, structure alignment, HTF bias, and chop filter. Each OFF signal shows the specific reason: "Quality below threshold," "Against external structure," "Against HTF bias," or "Choppy." 🔹 ACTIVE PLAN TRACKER After a valid signal, the engine projects: • Retest Zone — the area where price should retest the broken level • Invalidation Level — where the setup is void • Target — nearest opposing structure level • Status — Waiting Retest → Retest Hit → Target Hit / Invalidated All projected as visual boxes and lines extending forward. 🔹 LIQUIDITY SWEEPS Detects Buy-Side Liquidity (BSL) sweeps and Sell-Side Liquidity (SSL) sweeps on internal structure levels. Sweeps within the validity window boost the Quality Score by 20 points. 🔹 MARKET MODE CLASSIFICATION Combines internal and external structure states to determine the current market mode: Bullish Trend, Bearish Trend, Bullish Pullback, Bearish Pullback, Neutral, or No-Trade (choppy/compressed). 🔹 DECISION CARD DASHBOARD Real-time panel showing: External Bias, Market Mode, Last Setup, Quality Score/Grade, Trade Permission, Zone (Premium/Discount), Recent Sweep, and Plan Status. 🔹 FEATURES • 1100+ lines of professional Pine Script • Dual-layer swing detection (Internal + External) • BOS, CHoCH, BSL/SSL sweep detection • 7-factor Quality Score with letter grade • Trade Permission engine with reason codes • Active Plan projection (Retest / Invalidation / Target) • Premium/Discount cloud based on external range • HTF bias filter (multi-timeframe EMA) • Chop / no-trade zone detection • Three visual modes for different workflows • Dynamic alerts with full signal context • 20+ customizable parameters • No repainting The Structure Decision Engine is an analysis framework — it does not predict price or guarantee outcomes.
Pine Script® 인디케이터
Iamalala의
Kivra Liquidity Nodes [JOAT]Kivra Liquidity Nodes Introduction Kivra Liquidity Nodes is an open-source right-edge volume profile that finds high-participation price areas inside a configurable lookback window. It distributes each bar's volume across price rows, smooths the result, highlights the point of control, and labels local liquidity nodes. The problem it solves is volume context. A raw profile can show where trading occurred, but it often becomes visually heavy. Kivra Liquidity Nodes keeps the profile compact, separates bullish and bearish participation estimates, and prioritizes POC, value area, and node labels. The profile is offset to the right of price, while the lookback range and value area remain visible on the active chart so the levels have context. Core Concepts 1. Price-Overlap Volume Allocation Each bar contributes volume to every row it overlaps. This makes the profile more representative than assigning all volume to a single close price. 2. Participation Split The script estimates bullish and bearish participation from candle direction and close location inside the bar range. This is a proxy designed for visual context, not bid/ask delta. 3. Smoothed Node Detection Profile rows are smoothed with neighboring rows. Local peaks above an average-volume threshold become liquidity nodes. 4. Value Area Expansion The value area expands from the POC until the selected portion of total profile volume is covered. 5. Context Bands and Candle Tinting The script shades the full lookback range, marks the value area across the live price region, draws node bands across the profiled window, prints VAH/VAL and POC labels far to the right of the profile to avoid overlap, and can tint candles using a pressure blend from trend location and candle direction. Features Right-edge profile: Clean horizontal profile projected to the right of the chart POC line and label: Dashed level marking the highest-volume row POC line and label: Dashed level marking the highest-volume row with price and row volume VAH and VAL labels: Right-edge value-area high and low labels with dotted guide lines Value area boxes: Shaded profile zone plus live-chart value band across the lookback Lookback range box: Subtle range boundary around the profiled window Bull/bear split bars: Row coloring estimates directional participation Node labels: Local high-volume nodes with participation share and volume Node bands: High-participation node rows project back across the profiled price window Offset label rail: POC, VAH/VAL, and node labels are projected beyond the histogram so they do not sit on top of the profile Pressure candle tint: Candles can be softly colored from bearish red to bullish green using trend location and candle direction No-volume fallback: Uses range proxy when reliable volume is not available Top-right dashboard: POC, node count, value area width, bias, range, and source Input Parameters Calculation: Lookback Bars: Historical bars used for the profile Profile Rows: Vertical resolution of the profile Profile Width: Maximum right-edge width Profile Offset: Distance from current bar to the profile Value Area Portion: Portion of total profile volume included in value area Node Threshold: Required row strength for node detection Node Merge Gap: Distance allowed between merged node peaks Max Node Labels: Maximum labels drawn for detected nodes How to Use This Indicator Step 1: Use the POC as the dominant participation level in the current lookback. Step 2: Use the value area to understand where volume is concentrated. Step 3: Watch VAH and VAL as acceptance/rejection boundaries. Step 4: Watch labeled nodes as potential reaction or acceptance zones. Step 5: Read the dashboard bias and candle tint as context, not as standalone entry signals. Indicator Limitations Bull/bear participation is an estimate based on candle structure, not exchange bid/ask data The profile is recalculated on the latest bar and depends on the selected lookback High node count can add visual density on small screens Volume data quality varies by market and symbol Originality Statement Kivra Liquidity Nodes is original in its compact right-edge implementation combining overlap-based volume allocation, smoothed node detection, value area expansion, participation split visualization, and no-volume fallback logic. It does not copy third-party source code. Disclaimer This open-source indicator is provided for educational and informational purposes only. It is not financial advice. Volume nodes identify historical participation zones and do not guarantee future reactions. -Made with passion by jackofalltrades
Pine Script® 인디케이터
officialjackofalltrades의
Smart Trader, Episode 07, ICS Geometric Buyers/Sellers Pressure🔶 Overview ICS Geometric Buyer/Seller Pressure measures the real-time balance between buying and selling forces through a geometric framework built on triangle areas. Rather than relying on volume, oscillators, or moving-average crossovers, this indicator constructs two right triangles on every bar — one representing seller pressure above the current price, one representing buyer pressure below it — and computes their areas inside a normalized coordinate system called the Isotropic Coordinate System (ICS). The ICS transforms raw price and time into a dimensionless plane using Yang-Zhang composite volatility as the scaling factor. Because both axes are divided by the same volatility estimate, the resulting triangle areas carry no unit — they are pure geometric ratios. This makes the pressure reading comparable across any instrument, any timeframe, and any price scale, without the trader needing to adjust parameters when switching charts. From these two normalized areas, the indicator derives a single metric called B, which condenses the entire buyer-versus-seller balance into a value between −1 and +1. B is then converted into intuitive percentage readings (Red % for seller dominance, Blue % for buyer dominance) and visualized through a gradient barometer column, a triangle fan overlay, and data-window plots ready for alerts. 🔶 Conceptual framework To measure the real-time balance between buying and selling forces, this indicator takes a geometric approach rather than relying on volume analysis, oscillator divergences, or moving-average crossovers. Two right triangles are constructed on every bar — one above the current price toward the range ceiling, one below toward the range floor — and their areas are compared to determine which side of the market currently dominates. Computing triangle areas in raw price-versus-time coordinates, however, introduces a structural problem: the same price movement produces a different geometric shape depending on the chart's zoom level, time compression, or display resolution. A 30-point rally on a compressed weekly chart creates a steep, narrow triangle; the identical rally on a stretched intraday chart creates a flat, wide one. The areas differ even though the underlying market event is the same. To eliminate this distortion, the indicator applies a normalization layer referred to here as the Isotropic Coordinate System (ICS). The principle behind it is dimensional analysis — a well-established technique in physics and engineering for removing unit-dependent artifacts from measurements. The horizontal axis (time) is rescaled by dividing bar offsets by sigma, and the vertical axis (price) is rescaled by dividing the natural logarithm of price by the same sigma. Because both axes share the same divisor, the resulting coordinate plane is isotropic: triangle areas reflect only the structural relationship between price and range boundaries, not how the chart happens to be displayed. The sigma used for this normalization is the Yang-Zhang (2000) composite volatility estimator, a published academic method (Journal of Business, Vol. 73, No. 3). It combines three independent variance components — overnight (close-to-open), intraday (open-to-close), and the Rogers-Satchell high-low-close estimator — into a single unbiased measure with minimum-variance weighting. This makes sigma robust across instruments with overnight gaps (equities, futures) and those that trade continuously (forex, crypto). The practical result: the normalization layer adapts to the volatility regime of each instrument, making triangle areas structurally comparable across different charts and timeframes and reducing the need for manual recalibration when switching instruments. 🔶 The B metric: from triangle geometry to a single number The core output of this indicator is a single value called B, which captures the instantaneous buyer-versus-seller balance in one dimensionless number. Picture any bar on your chart. The indicator draws two right triangles around it. The upper triangle sits between the bar's high and the range ceiling: its three vertices are (1) the current bar's high, (2) the range ceiling at the current bar, and (3) the range ceiling at the prime-offset bar, 101 bars back. This triangle represents seller territory — the geometric "room" that sellers occupy above the current price. The lower triangle mirrors this below: its vertices are the current bar's low, the range floor at the current bar, and the range floor at that same prime-offset bar. This is buyer territory — the room below the current price. The larger the seller triangle relative to the buyer triangle, the more the market is tilted toward selling pressure, and vice versa. Why prime-numbered offsets? The indicator uses the first 25 prime numbers (3, 5, 7, 11, ... 97, 101) as its sampling offsets. Prime numbers share no common factors with each other or with any periodic cycle in the data. When a signal is sampled at evenly spaced intervals (e.g. every 10, 20, 30 bars), there is a risk that the sampling grid locks onto a periodic pattern in the price — a weekly cycle, an options expiration rhythm, or any recurring structure — and either amplifies or masks it. This is a form of harmonic aliasing. Prime offsets avoid this: because no prime is a multiple of any other, the sampling set {3, 5, 7, ... 101} is maximally non-periodic, ensuring that each offset captures a structurally independent slice of the price range. Two roles: measurement and visualization For the B calculation itself, only the widest triangle is used — the one anchored at prime offset 101. This single pair of triangles (upper and lower) captures the broadest structural pressure across the entire lookback window. The remaining 24 primes serve a visual role: they generate the triangle fan overlay you see on the chart. But this visual layer is not merely decorative. Each triangle in the fan maps a pressure boundary at a different time horizon. As the screenshot above illustrates, candles that approach the red triangle edges tend to encounter resistance and reverse — the fan effectively draws a multi-scale map of where selling pressure intensifies. The blue fan does the same for buyer pressure below. Taken together, the fan gives the trader a spatial reading of how pressure distributes across shorter and longer horizons. A notable property observed during testing across multiple instruments and timeframes: regardless of triangle size or lookback period, B consistently produces values within the bounded range of -1 to +1. This is not a coincidence — it is a mathematical consequence of the symmetric ratio formula that derives B from the two triangle areas. The formula Both triangle areas are first computed using the Shoelace formula — a standard computational geometry method that yields the exact area of any polygon from its vertex coordinates. Then B is derived through a symmetric ratio: r1 = A_hi / A_lo     r2 = A_lo / A_hi     B = (r1 - r2) / (r1 + r2) When the seller triangle is much larger than the buyer triangle (A_hi >> A_lo), r1 grows large while r2 shrinks, and B approaches +1. When buyer pressure dominates, B approaches -1. When both areas are equal, B = 0 — balanced pressure. The formula is symmetric by construction, meaning it treats buyer and seller sides with identical mathematical weight. Percentage conversion To make B immediately readable on the chart, the indicator converts it into two percentage values: Red % = (B + 1) x 50     seller dominance, scale 0 to 100 Blue % = (1 - B) x 50     buyer dominance, scale 0 to 100 Red % and Blue % always sum to 100. They are available in the Data Window for any bar and are exposed as alert-ready plots, allowing traders to set threshold-based alerts (e.g. "Red % crosses above 80") directly from TradingView's alert builder, without writing any code. 🔶 Features at a glance 🔸 Gradient barometer — A vertical column rendered to the right of the last bar. It splits the effective range into a red (seller) zone and a blue (buyer) zone, with the dividing line set by B. The gradient fades from full opacity at the split point to near-transparent at each range boundary, giving an immediate visual sense of which side is dominant and by how much. 🔸 Prime triangle fan — 25 filled triangles (one per prime offset from 3 to 101) overlaid on the chart. Upper triangles are colored red (seller pressure), lower triangles blue (buyer pressure). Together they form a fan that maps pressure intensity across multiple time horizons simultaneously. Optional dashed outlines can be enabled for each side independently. 🔸 Range lines with price labels — Horizontal lines marking the effective high and low of the lookback window. Each line carries a price label placed to the left of the range start. When the channel is frozen (see Freeze/Revival below), a snowflake icon (❄) appears on the labels. 🔸 Diamond markers and prime labels — At each prime-offset bar, a diamond marker is placed at both the range ceiling and the range floor. The corresponding prime number is displayed above the ceiling diamond, providing a visual ruler of the sampling structure. 🔸 Freeze / Revival system — When a confirmed close breaches the range boundary, the mother channel freezes and a child channel is born on the breach side. The child computes its own pressure metric (B'), and when the opposing force inside the child reaches a user-defined threshold, the mother channel revives. This mechanism tracks regime transitions without discarding the prior range context. A dedicated label at the breach candle shows the child's B' value in real time. 🔸 Live and Closed display modes — "Live" updates tick by tick using the current bar's data. "Closed" anchors all calculations on the last confirmed bar, eliminating intra-bar noise for traders who prefer signal stability. 🔸 Data Window and alert-ready plots — Three invisible plots (Red %, Blue %, raw B) are exposed in the Data Window and available for TradingView's alert condition builder. Traders can create threshold, crossover, or crossing alerts on any of these values without writing Pine Script. 🔸 Full visual customisation — Every visual element (triangle fill colors, line colors, diamond size, text size, barometer width, barometer offset, gradient steps) is independently configurable through the indicator's settings panel. 🔶 Deep dive: the barometer The barometer is a vertical gradient column displayed to the right of the last bar on the chart. Its purpose is to translate the abstract B value into a shape that the eye can read instantly: a column split into a red zone (seller pressure) on top and a blue zone (buyer pressure) on the bottom. The column spans the full effective range — from rangeLow at the bottom to rangeHigh at the top. The split point between red and blue is not placed at the midpoint of the range. Instead, it is calculated directly from B: yMid = rangeHigh − (B + 1) × range / 2 When B = 0 (balanced), yMid sits at the exact center of the range. When B approaches +1 (full seller dominance), yMid drops toward the range floor, making the red zone fill nearly the entire column. When B approaches −1 (full buyer dominance), yMid rises toward the range ceiling, and the blue zone dominates. The gradient is rendered using a configurable number of boxes (default: 50). In the red zone, opacity is strongest near yMid and fades to near-transparent at rangeHigh. In the blue zone, opacity is strongest near yMid and fades toward rangeLow. This creates a natural "heat" effect: the most intense color always concentrates at the boundary where the two forces meet. At the top and bottom of the column, percentage labels display the Red % and Blue % values. These are the same percentages available in the Data Window, presented here as a quick visual reference. The barometer responds to the selected display mode. In "Live" mode, it updates on every tick using the current bar's B value. In "Closed" mode, it uses the B computed from the last confirmed bar, providing a stable reading that does not flicker with intra-bar price movement. Barometer settings 🔸 Show barometer — Toggle the entire barometer on or off. Default: on. 🔸 Offset (bars right) — How far to the right of the last bar the column is placed. Default: 11. Increase this if the barometer overlaps with other right-margin elements. 🔸 Width (bars) — The horizontal thickness of the column, measured in bars. Default: 5. 🔸 Gradient steps — The number of boxes used to render the gradient. Higher values produce a smoother fade. Default: 50. 🔶 Deep dive: the prime triangle fan The triangle fan is the indicator's signature visual element. It renders 25 filled triangles on the chart — one for each prime offset from 3 to 101 — fanning out from the current bar toward the left side of the lookback window. Upper triangles are shaded red (seller pressure) and lower triangles are shaded blue (buyer pressure), each with high transparency so the underlying candlesticks remain clearly visible. Every triangle in the fan shares two of its three vertices with the current bar: the bar's high (for upper triangles) or the bar's low (for lower triangles), and the corresponding range boundary at that bar. The third vertex sits at the range boundary at the prime-offset bar. Because each prime offset is a different distance back in time, the triangles vary in width — the smallest is narrow and captures very short-term pressure, while the largest stretches across the full lookback and captures the broadest structural picture. Reading the fan as a pressure map The fan functions as a multi-scale pressure map. Each triangle edge represents a boundary where one side's territory begins. When price approaches a cluster of red triangle edges from below, it is entering a zone where seller pressure intensifies across multiple time horizons simultaneously. The denser the overlap of red edges at a given price level, the stronger the structural resistance at that level. The same logic applies in reverse for blue edges and buyer support. This is visible in practice: candles that push into the red fan often stall or reverse at the triangle boundaries, while candles that drop into the blue fan tend to find support. The fan gives the trader a spatial sense of how much room each side has — a wide blue zone with thin red edges suggests buyers have structural space to move, and vice versa. Color flipping during freeze When the Freeze/Revival system is active and price moves beyond the frozen range boundary, the triangle colors on the breached side flip to reflect the new structural reality. Consider a downward breach: price closes below the frozen rangeLow and continues falling. The lower triangles — which normally appear blue to represent buyer territory — switch to red. This signals that what was once the buyer's domain has been structurally penetrated; the geometry now measures selling pressure extending below the old floor. At the same time, the upper triangles remain red as they always are, and because the distance between the current price and the frozen rangeHigh has grown dramatically, the seller area expands. The visual result: the entire fan turns uniformly red, reflecting overwhelming seller dominance across every time horizon in the fan. The mirror case works identically. During an upward breach, price closes above the frozen rangeHigh and continues rising. The upper triangles flip from red to blue, signaling that seller space has been penetrated from below. The lower triangles remain blue, and because the gap between the current price and the frozen rangeLow is now vast, buyer area dominates. The entire fan turns uniformly blue, reflecting overwhelming buyer dominance. The color flip is automatic and requires no user intervention. It is driven entirely by the relationship between the current price and the frozen boundaries — when price returns inside the frozen range, colors revert to their normal assignment. Diamond markers and prime labels At each prime-offset bar, the indicator places diamond-shaped markers at both the range ceiling and the range floor. Above the ceiling diamond, the prime number itself is displayed as a label. These markers serve as a visual ruler: they show the trader exactly where each sampling point falls in time and make the non-periodic spacing of the primes immediately visible on the chart. Fan settings 🔸 Show lower triangle lines / Show upper triangle lines — Toggle dashed outlines for each side. Default: off. When enabled, the outlines make individual triangle edges more distinct, which can be helpful when reading overlapping edges at specific price levels. 🔸 Lower / Upper line color — Stroke color for the dashed outlines. 🔸 Lower / Upper fill color — Fill color and transparency for the triangle bodies. Default: high transparency so candles remain readable. 🔸 Show vertical lines — Draws a vertical line at each prime-offset bar. Default: off. 🔸 Show prime labels — Displays the prime number and diamond at each offset. Default: on. 🔸 Diamond color / Diamond size — Visual styling for the diamond markers. 🔸 Label text size — Font size for the prime number labels. 🔸 Deep dive: Freeze / Revival Markets do not stay inside ranges forever. When price breaks out, most range-based indicators simply reset and start a new range from scratch, discarding whatever structural context existed before the breakout. The Freeze/Revival system takes a different approach: it preserves the prior range as a frozen reference while simultaneously tracking the new regime that emerges beyond it. How a freeze is triggered A freeze occurs when a confirmed close — not a wick, not an intra-bar spike — breaches the effective range boundary. The indicator compares the previous bar's close against the range that existed one bar before it, so the breach signal is fully confirmed and cannot repaint. Once a breach is detected: 🔸 The mother channel freezes — its high and low are locked at the values they held just before the breach. 🔸 A child channel is born on the breach side. For an upward breach, the child's floor is the frozen rangeHigh and its ceiling expands with each new high. For a downward breach, the child's ceiling is the frozen rangeLow and its floor drops with each new low. 🔸 A snowflake icon (❄) appears on the range price labels, and the triangle colors flip as described in the section above. The child channel and B' While the mother channel is frozen, the child channel computes its own independent pressure metric called B'. B' uses the same ICS triangle formula as the mother's B, but measured against the child's own boundaries. This means B' tracks the buyer/seller balance exclusively inside the new regime — the territory beyond the old range. A dedicated label appears at the breach candle showing the current B' value, converted to the percentage of the opposing force. For a downward breach, the label displays the buyer percentage inside the child; for an upward breach, it displays the seller percentage. This tells the trader how much counter-pressure is building inside the breakout zone. B' as a structural overbought / oversold reading When B' shows a very low opposing-force percentage shortly after a breach, the breakout side is structurally dominant — price has moved aggressively beyond the old range with minimal resistance. This condition is analogous to what traders call an overbought or oversold state, but derived from geometry rather than from momentum oscillators. The reading reflects the spatial imbalance between the two forces inside the child channel: one side occupies nearly all the geometric territory. As time passes, if the opposing force gradually builds — the B' percentage climbs — it signals that the breakout is losing its structural one-sidedness. The market is beginning to rebalance inside the new territory. Watching B' evolve over successive bars gives the trader a real-time gauge of whether the breakout retains its structural conviction or is approaching exhaustion. Revival: when does the freeze end? The freeze lifts when the opposing force inside the child channel reaches a user-defined threshold (default: 50%). At that point, the indicator interprets this as the exhaustion of the breakout: the force that drove the breach is being met by equal or greater counter-pressure. The freeze is lifted, all freeze state is reset, and the mother channel resumes normal range tracking. The snowflake icons, B' label, and color flips are removed. The revival threshold is configurable. A lower value makes the system more sensitive — it revives sooner, treating even moderate counter-pressure as a regime reset. A higher value makes it more patient — it waits for stronger opposition before releasing the freeze. The default represents balanced equilibrium: the freeze ends when the opposing side has matched the breach side. Why this matters The Freeze/Revival cycle gives the trader a structured way to observe regime transitions. Rather than watching a range silently reset after a breakout, the trader sees the old range preserved as context (frozen lines with ❄), the new regime measured in real time (B' at the breach candle with its overbought/oversold implication), and a clear signal when the transition is complete (revival). This makes it possible to distinguish between a genuine regime change and a brief spike that reverts — without relying on arbitrary time delays or fixed-bar re-entry rules. 🔸 Reading the indicator This indicator does not generate buy or sell signals. It is a measurement tool that quantifies the geometric balance between buyer and seller pressure. How that measurement is incorporated into a trading decision is entirely up to the trader. The following observations describe what the indicator shows, not what the trader should do. The barometer as a quick-glance gauge The barometer provides the fastest reading. A column dominated by red indicates that seller pressure is structurally larger than buyer pressure across the lookback window. A column dominated by blue indicates the reverse. When the split point sits near the center, pressure is approximately balanced. Watching how the split point migrates over successive bars reveals whether the pressure balance is shifting gradually or remaining stable. The fan as a spatial context layer The triangle fan adds spatial depth to the barometer's single-number reading. While the barometer tells you the current balance, the fan shows you where that balance is concentrated in price space. Areas where multiple triangle edges converge represent zones of intensified pressure — structural resistance above (red edges) or structural support below (blue edges). When price trades inside a region with sparse triangle coverage, it has more structural room to move before encountering the next pressure boundary. Freeze events as regime markers When a freeze occurs, it marks a structural event: price has left the established range. The frozen lines (marked with ❄) preserve the old context, and B' at the breach candle provides a real-time measure of how one-sided the new regime is. A very low opposing-force reading in B' indicates a structurally extended condition — the breakout side has occupied nearly all geometric territory. As B' climbs toward the revival threshold, it indicates increasing counter-pressure. The moment of revival itself marks the point where the new regime's one-sidedness has been structurally neutralized. Combining readings The three visual layers — barometer, fan, and freeze state — work together. For example, a barometer showing strong seller dominance combined with a fan whose red edges are densely clustered near the current price suggests concentrated structural resistance. If a freeze is also active with a low B', the structural picture is one of strong directional conviction on the breach side. Conversely, a barometer near balance with widely spaced fan edges and no active freeze suggests a structurally neutral environment. Data Window and alerts The Red %, Blue %, and raw B values are available in TradingView's Data Window for any bar by hovering over it. These same values are exposed as alert-ready plots, meaning traders can set alerts directly from TradingView's alert builder — for example, triggering when Red % crosses above or below a chosen level, or when B crosses zero. No Pine Script knowledge is required to create these alerts. 🔸 Open-source structure and reusability This script is published open-source under the Mozilla Public License 2.0. The full computation pipeline — the Yang-Zhang volatility estimator, the ICS coordinate transformation, the Shoelace area calculation, and the symmetric ratio that produces B — is readable, auditable, and reusable. B is a bounded output: it always falls between −1 and +1, carries no unit, and is computed from normalized geometry. These properties make it suitable as an input for other scripts. Examples of how B can serve as input to further analysis include: 🔸 Plotting B as a standalone oscillator with its own zero line and structural extremes. 🔸 Applying moving averages of different periods to B and studying their crossovers as indicators of shifting pressure regimes. 🔸 Using B as a weighting coefficient to scale other measurements by the current geometric pressure balance. 🔸 Comparing B across timeframes, since the ICS normalization makes the metric structurally comparable regardless of the chart resolution. 🔸 Testing for divergences between B and price action. 🔸 Using B as a filter condition for entry or exit logic in other strategies. The code is available for study and extension under MPL 2.0. Traders and developers who wish to build on this metric have full access to its derivation. 🔸 Settings reference Range Lines 🔸 Lookback length — Number of historical bars used to compute the high/low range. Default: 101. 🔸 Line width — Pixel width of the horizontal range lines. Default: 1. 🔸 Display mode — "Live" updates tick by tick using the current bar. "Closed" anchors on the last confirmed bar, eliminating intra-bar noise. Default: Live. ICS 🔸 ICS Window — Number of bars fed into the Yang-Zhang volatility estimator. Controls how much historical data shapes the normalization sigma. Default: 101. Prime Verticals and Labels 🔸 Show vertical lines — Draws a vertical line at each prime-offset bar. Default: off. 🔸 Show prime labels — Displays the prime number and diamond marker at each offset. Default: on. 🔸 Vertical line color — Color for vertical lines at prime offsets. 🔸 Diamond color — Color of diamond markers and their labels. 🔸 Label text size — Font size for prime number labels, in points. 🔸 Diamond size — Size of the diamond-shaped markers, in points. Prime Triangles 🔸 Show lower triangle lines — Toggle dashed outlines for lower (buyer) triangles. Default: off. 🔸 Show upper triangle lines — Toggle dashed outlines for upper (seller) triangles. Default: off. 🔸 Lower line color — Stroke color for lower triangle dashed outlines. 🔸 Upper line color — Stroke color for upper triangle dashed outlines. 🔸 Lower fill color — Fill color and transparency for lower (buyer) triangle bodies. 🔸 Upper fill color — Fill color and transparency for upper (seller) triangle bodies. Barometer 🔸 Show barometer — Toggle the barometer column on or off. Default: on. 🔸 Offset (bars right) — Horizontal distance from the last bar to the barometer column. Default: 11. 🔸 Width (bars) — Horizontal thickness of the barometer column. Default: 5. 🔸 Gradient steps — Number of boxes used to render the gradient. Higher values produce a smoother fade. Default: 50. Freeze and Revival 🔸 Revival threshold (B') — When the opposing force inside the child channel reaches this percentage, the freeze ends and the mother channel resumes. A lower value revives sooner; a higher value waits for stronger counter-pressure. Default: 50. 🔸 Disclaimer This indicator is a technical analysis tool designed for educational and informational purposes. It measures the geometric balance between buyer and seller pressure using the methodology described above. It does not predict future price movements, does not guarantee any outcome, and does not constitute financial, investment, or trading advice. The B metric, the barometer, the triangle fan, and the Freeze/Revival system are structural measurements derived from historical price data. Like all technical indicators, they reflect past and present conditions and carry inherent limitations. Market conditions can change rapidly, and no single measurement tool can account for all factors that influence price. Traders should use this indicator as one component within a broader analytical framework, always in combination with their own research, risk management practices, and judgment. Past performance of any reading or pattern observed through this indicator is not indicative of future results. Use this tool at your own risk. The author assumes no liability for any trading decisions made based on the information provided by this indicator.
Pine Script® 인디케이터
ata_sabanci의
10
Smart Money Concept: Liquidity Sweep [MarkitTick]💡 The Smart Money Concept: Liquidity Sweep is an advanced technical suite engineered for precision algorithmic trading and comprehensive market analysis. this unified market intelligence hub tracks major market participant footprints by analyzing liquidity raids, structural shifts, and fair value gaps. It operates strictly on confirmed data to ensure zero lookahead bias, making it an authoritative tool for quantitative analysts and disciplined traders who demand rigorous data integrity. This system provides a complete and deterministic view of price action, abstracting complex market mechanics into clear, actionable signals. Every module within this script has been optimized for minimal execution overhead while maximizing analytical depth. ● ✨ Originality and Utility Unlike generic structure indicators that simply plot highs and lows, this tool integrates a proprietary Confluence Score Dashboard and a robust Liquidity Sweep Filter. It does not merely react to price crossing a level; it evaluates the nature of the interaction, distinguishing between genuine market structure shifts and manipulative liquidity sweeps orchestrated by large-cap market participants. By unifying ten distinct analytical modules into a single, performance-optimized architecture, it provides a complete and cohesive trading ecosystem without cluttering the chart. These modules range from Order Block mitigation tracking to Session Kill Zones and Premium/Discount mapping, ensuring all aspects of price action are covered. Furthermore, it is explicitly built for automation, seamlessly generating strictly formatted JSON payloads for direct routing to external execution platforms like PineConnector or 3Commas. These JSON webhooks dynamically calculate and transmit precise Entry, Take Profit, and Stop Loss parameters strictly utilizing format.mintick string conversions. ● 🔬 Methodology and Concepts The core engine operates on a multi-dimensional analysis framework, utilizing advanced market mechanics to decode price delivery algorithms: • Fractal Market Structure The script mathematically identifies key swing points to establish dynamic structural ranges. It accurately tracks the active trend and flags both Break of Structure (BOS) and Change of Character (CHoCH) events based on confirmed price closes. This ensures that the underlying trend logic is grounded in true market conviction rather than momentary volatility. • Liquidity Engineering The engine actively monitors previous pivot extremes for sweep conditions. This ensures that entries are backed by strategic liquidity harvesting from large-volume entities, rather than falling for premature breakouts or retail traps. • Multi-Timeframe Alignment The indicator employs a higher-timeframe variance filter to gauge the overarching trend direction. It utilizes offset data arrays with strict lookahead protection to ensure a strictly non-repainting bias confirmation across multiple chart periods. • Inefficiency Mapping The algorithm detects and maintains active Fair Value Gaps (FVG) and structural Inducements (IDM). It dynamically mitigates and clears these zones from the chart as price action naturally rebalances the market inefficiency, keeping the visual workspace clean. ● 🎨 Visual Guide The script provides a clean, highly actionable visual hierarchy directly on the chart to minimize cognitive load: Structure Candles: Candlesticks are dynamically colored to reflect the current internal state. They are painted Cyan during confirmed bullish structural trends and Magenta during confirmed bearish trends. Structural Lines and Labels: Dashed lines project horizontally from broken swing points. These lines are explicitly annotated with BOS or CHoCH labels indicating the exact direction and type of structural shift that occurred. Zone Fills (Boxes): Support and Resistance Zones: Cyan and Magenta boxes highlight active bullish and bearish Order Blocks (OB). Mitigated blocks dynamically change to a muted gray color to reduce visual noise. Premium and Discount Zones: When enabled, the active structural range is divided into a Magenta Premium zone, a white Equilibrium line, and a Cyan Discount zone. FVG Zones: Transparent graphical fills indicate unmitigated Fair Value Gaps waiting for price rebalancing. Session Kill Zones: Highlighted backgrounds map the Asian (Orange), London (Gold), and New York (Green) active trading windows for temporal confluence. Inducement Labels: Yellow IDM tags mark minor pullbacks that have been successfully swept, confirming liquidity capture. Confluence Dashboard: A dynamic text label appears precisely at the point of signal generation. It displays an aggregate score from 0 to 5, color-coded Green for High Confluence, Orange for Medium, or Red for Low. A detailed hover-tooltip breaks down the active filters contributing to the score. ● 📖 How to Use To maximize the utility of this robust tool, traders should seek alignment across multiple internal analytical modules: Establish Context: Begin by utilizing the Session Kill Zones and Premium/Discount areas to frame the current market environment. Ideal long setups originate deep within the Cyan Discount zone during active London or New York trading hours. Identify Liquidity Capture: Wait patiently for a confirmed liquidity sweep or the breaking of an Inducement (IDM) level. This validates that major market operators have accumulated positions and trapped counter-trend traders. Confirm the Shift: Monitor the chart for a valid BOS or CHoCH signal backed by the Confluence Score Dashboard. A score of 4 or 5 indicates exceptionally high alignment between HTF bias, liquidity sweeps, market gaps, and session timing. Execution and Risk: Upon signal generation, the script automatically plots the optimal entry point. It also calculates a dynamic ATR-based Stop Loss and a predefined Risk/Reward-based Take Profit. These exact price coordinates are simultaneously broadcast via the automated JSON alert webhook for seamless execution. ● ⚙️ Inputs and Settings The suite is highly customizable, divided into logical control groups for rapid configuration: • Market Structure Adjust the Swing Length sensitivity to filter out market noise and define the exact target Risk/Reward Ratio for automated signal generation. • Visuals Granular control is provided over all interface colors, including specific toggles for dynamic candle coloring and user-configurable zone opacities. • Toggleable Filter Modules Ten individual toggles allow users to enable or disable specific algorithmic engines, including: ① Liquidity Sweep Filter ② HTF Bias Filter (with customizable resolution) ③ Premium / Discount Zone ④ Session Kill Zones ⑤ Fair Value Gap Engine ⑥ Inducement Detection ⑦ MSS Body Confirmation (requires full body closes for valid structure breaks) ⑧ ATR-Adaptive SL (with custom length and standard deviation multiplier) ⑨ OB Mitigation Tracker ⑩ Confluence Score Dashboard ● 🔍 Deconstruction of the Underlying Scientific and Academic Framework The algorithmic foundation of this analytical suite is firmly anchored in Auction Market Theory and variance-adjusted statistical modeling. At its core, the indicator rejects the standard premise of random walk price action, instead modeling the financial market as a highly efficient, liquidity-seeking mechanism. By mathematically isolating structural extremes and standardizing pivot lengths, the engine calculates the probability of order flow absorption versus trend continuation. The script analyzes the temporal decay of market inefficiencies, specifically mapping how quickly Fair Value Gaps are rebalanced by subsequent price delivery. The inclusion of an ATR-adaptive risk model ensures that stop-loss parameters expand and contract proportionally to current market variance. This utilizes average true range standard deviations to normalize volatility, preventing premature stop-outs during periods of high structural stress. Furthermore, the proprietary Confluence Score relies on a multi-variate Boolean matrix. This matrix synthesizes time-domain variables (Session Zones), spatial distribution metrics (Premium/Discount mapping), and momentum vectors (HTF Bias) into a singular, quantized metric of setup validity. This deterministic mathematical approach removes subjective bias, relying purely on the physics of price delivery, volume distribution, and order flow imbalance. ⚠️ Disclaimer All provided scripts and indicators are strictly for educational exploration and must not be interpreted as financial advice or a recommendation to execute trades. I expressly disclaim all liability for any financial losses or damages that may result, directly or indirectly, from the reliance on or application of these tools. Market participation carries inherent risk where past performance never guarantees future returns, leaving all investment decisions and due diligence solely at your own discretion.
Pine Script® 인디케이터
MarkitTick의
1
52-Week High DiamondMarks every bar that made a new 52-week high with a small diamond above the wick. The most recent 52-week high is highlighted in full color so it stands out at a glance. All prior highs display at reduced opacity to keep the chart clean without losing the historical context. Useful for quickly identifying where a stock has been making new highs, how frequently it's been doing so, and how far back the most recent high occurred — all without cluttering your chart. Settings Toggle all historical 52-week high diamonds on/off Toggle the most recent 52-week high diamond on/off Custom color picker Adjustable vertical offset
Pine Script® 인디케이터
vinthomas의
Heikin Ashi Real Price LineI prefer using Heikin Ashi candles on my charts. For me it's easier to see both the trend direction, and the trend strength (whether there are wicks or not). But I also like some of the information traditional Japanese candles give you. So I wrote this indicator to show (1) the actual current candle's price to help me time entries/exits, and (2) the price at which the candle closed, indicated by a dot. You can extend price line if you want across the screen, or hide the closing dots too if you prefer. Hope you get some use out of it.
Pine Script® 인디케이터
SandlotFlanking의
BIST30 TARAYICI⚠️ ÖNEMLİ: EKRAN TEMİZLİĞİ (GİZLEME NOTU) Bu tarayıcı, tüm parametreleri ayarlardan değiştirmenize imkan tanıdığı için TradingView bu isimleri ekranın sol üstünde uzun bir liste olarak gösterir. Bu görüntü kirliliğini engellemek için: **Grafiğe sağ tıklayın -> Ayarlar -> Durum Çizgisi** sekmesine gidin ve gösterge isminin yanındaki **"Argümanlar"** kutucuğunun tikini kaldırın. BİST 30 Tarayıcı Bu panel, BİST30 hisselerini anlık trend döngüleri, Price Action (Fiyat Hareketi) formasyonları ve yüksek zaman dilimli (HTF) Fibonacci hedefleri üzerinden tarayan profesyonel bir analiz istasyonudur. **⚠️ YASAL UYARI:** *Bu gösterge matematiksel bir algoritmadır; algoritma doğru olmayabilir; kodlama hatası olabilir bu nedenle kesinlikle yatırım tavsiyesi (YTD) niteliği taşımaz. Kararlarınızı kendi risk yönetiminize göre almalısınız.* --- 1. Sinyal ve Statü Mantığı (Nasıl Çalışır?) Sistem, bir hissenin yükseliş karakterini 4 farklı evrede takip eder: NÖTR (Gri):** Hisse genel düşüş trendindedir veya ortalamaların altındadır. "İzleme, enerjini harcama" mesajıdır. TREND (Soluk Yeşil):** Hisse sağlıklı bir yükseliş trendine girmiştir (EMA 5 > 8 > 13). Yön yukarıdır ancak yeni giriş için fiyat çok yükselmiş olabilir. PUSU (Sarı):** **Stratejinin Kalbi!** Trend yukarıyken fiyatın kâr satışlarıyla "İndirim/Destek" bölgesi olan EMA 8'e gerilediği aşamadır. Avcının pusuya yatıp onay beklediği yerdir. AL - (Parlak Yeşil):** **Tetik Çekme Zamanı!** Hisse pusu bölgesindeyken alıcıların güç gösterdiğini kanıtlayan şu formasyonlardan biri oluşmuştur: AL-Star :Sabah Yıldızı (En Güvenilir Dönüş). AL-Eng :Yutan Boğa (Güçlü Alıcı Onayı). AL-Har :İç Mum (Sıkışma ve Patlama Hazırlığı). AL-Pin :Pin Bar/Çekiç (Alt İğneyle Fiyat Reddi). AL-Doj :Doji (Kararsızlığın Alıcı Lehine Bitmesi). 2. Destek ve Dirençler (Hedef Zaman Dilimi) Tablodaki **D1-D5** seviyeleri, ayarlardan seçtiğiniz üst periyoda (Örn: Günlük) göre hesaplanır. Sütun başlıklarındaki parantez içi etiketler (D, W, 60 vb.) hangi hedefleri izlediğinizi gösterir. **Mantık:** Seçilen üst periyodun önceki günkü High-Low (En Yüksek-En Düşük) farkı baz alınır. **Hedef:** Bu fark Fibonacci altın oranlarıyla çarpılarak potansiyel kâr al bölgelerini (D1'den D5'e) belirler. 3. Algoritma Derinliği ve Parametreler Sistem, piyasa gürültüsünü filtrelemek için üçlü bir emniyet mekanizması kullanır: * **Trend Tescili (EMA 13):** En yavaş ortalamadır. Fiyat bu seviyenin altındaysa sistem asla "AL" vermez; bu sizi düşen bıçağı tutmaktan korur. * **Dinamik Hassasiyet (ATR):** "Pusu" bölgesi sabit bir çizgi değildir. Ayarlardaki **ATR Periyodu** ve **Pusu Hassasiyeti**, hissenin kendi oynaklığına göre desteğe ne kadar yaklaşınca sinyal vereceğini belirler. (Standart: ATR 14 / Hassasiyet %0.2). * **Onay Mekanizması:** Sinyaller periyot kapanışıyla (Örn: 20dk mum kapanışı) netleşir. Bu, anlık iğnelerin sizi yanıltmasını engeller. 4. Stratejik Kullanım Önerisi 1. **Filtre:** Sadece fırsatları görmek için **"Sadece Fırsatları Göster"**i işaretleyin. 2. **Hazırlık:** SARI (Pusu) statüsündeki hisseleri izleme listenize alın. 3. **Aksiyon:** Statü PARLAK YEŞİL (AL) olduğunda işleme girin. 4. **Kâr Al:** Tablodaki **D1, D2 ve D3** seviyelerini kademeli satış hedefleri olarak takip edin. 5. **Disiplin:** Statü tekrar GRI (Nötr) statüsüne dönerse, bu teknik olarak trendin veya desteğin kırıldığı anlamına gelir; manuel stop veya pozisyon kapatma için bir uyarıdır. **⚠️ YASAL UYARI:** *Bu gösterge matematiksel bir algoritmadır; algoritma doğru olmayabilir; kodlama hatası olabilir bu nedenle kesinlikle yatırım tavsiyesi (YTD) niteliği taşımaz. Kararlarınızı kendi risk yönetiminize göre almalısınız.*
Pine Script® 인디케이터
Okeefe06의
1
Thermal Candlestick Spectrogram [Jamallo]The Thermal Candlestick Spectrogram replaces flat, binary candlesticks with a heat-mapped view of price density. Every bar radiates outward from a white-hot core through layers of orange, red, and deep amber — the same way thermal imaging reveals intensity beneath a surface. The result is a chart that doesn't just show you what price did, it shows you how concentrated that move was. How It Works A 7-layer gradient stack is anchored to each candle's midpoint and expands symmetrically toward the edges of the body. Transparency increases with each outer layer, creating a natural falloff that mimics heat dissipation: White-yellow core — maximum density at the center of the body Orange-red mantle — transitional layers that reveal the spread of price action Dark outer boundary — a near-transparent edge that lets candles breathe without hard lines Fading wicks — a dual-layer vertical fade that tapers wicks naturally toward the High and Low extremes, reducing visual noise Anti-aliased price dot — a precision close marker with a subtle white halo for clean real-time tracking Design & Performance The entire effect runs on a fixed 9-plot architecture (7 body layers + 2 wick layers), keeping script weight low and render performance stable even alongside other indicators. No dynamic loops, no repainting — just a clean, deterministic stack that works across all timeframes and instruments. Visual Comparison Traditional flat candles vs. the Thermal Spectrogram — same data, entirely different depth.
Pine Script® 인디케이터
Jamallo22의
2
[ A L P H A X ] Prism Price Action Institutional FlowAlphaX Prism — Price Action × Key Levels × Institutional Flow | Confluence Engine, Smart Entry/Exit Signals & Multi-Factor Confidence Scoring AlphaX Prism is a professional-grade price action and confluence trading system that fuses three powerful analytical dimensions into a single, cohesive overlay indicator: automatic Key Level detection, real-time Price Action pattern recognition, and Institutional Footprint tracking. Every signal is governed by a 10-factor confluence scoring engine and a weighted confidence percentage system — so only high-quality, structurally valid setups reach your chart. Designed for traders who want clean, context-aware signals rooted in market structure rather than lagging oscillators. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔬 The Three Pillars of AlphaX Prism AlphaX Prism operates across three simultaneous analytical layers, each feeding into the central confluence engine: I. Key Level Engine — Automatic Support & Resistance Detection The Key Level engine automatically identifies, tracks, and manages the most significant support and resistance zones on your chart using swing pivot detection. Rather than drawing static lines, AlphaX Prism builds intelligent zones that evolve as price interacts with them. How the Key Level engine works: Swing Pivot Detection — identifies significant highs and lows using a configurable swing length parameter Zone Merging — nearby levels within a configurable ATR-based threshold are merged into a single consolidated zone, preventing level clutter Touch Counting — each zone tracks how many times price has interacted with it. Zones below the minimum touch threshold appear in neutral gray; confirmed zones flip to color-coded support (yellow-green) or resistance (red) Zone Age Management — zones older than a configurable bar count are automatically retired and removed, keeping your chart focused on relevant levels only Dynamic Extension — all zones and lines extend to the right edge of the chart in real time Key Level signals feed directly into the confluence engine and generate specific condition flags: Price at Support — price is currently trading within a confirmed support zone Price at Resistance — price is currently trading within a confirmed resistance zone Bounce from Support — price touched support and closed bullish with a meaningful body — the highest-value condition for long setups Rejection from Resistance — price touched resistance and closed bearish with a meaningful body — the highest-value condition for short setups ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ II. Price Action Pattern Engine — What the Candles Are Saying AlphaX Prism recognizes five core price action patterns in real time, each validated with additional filters to reduce false triggers: Bullish / Bearish Engulfing A bullish candle that fully engulfs the prior bearish candle (or vice versa), with a meaningful body ratio and a candle range above a minimum ATR threshold. Engulfing patterns receive the highest PA score in the confluence engine and trigger a dedicated marker on the chart when occurring at a key level or in the direction of the established trend. Bullish / Bearish Pin Bar A candle with a wick at least 2.5× the body length, where the wick is significantly larger than the opposing wick, and the close is in the upper or lower half of the candle's range respectively. The candle must meet a minimum ATR size threshold to qualify. Inside Bar Breakout When a candle is fully contained within the prior candle's range (inside bar), the next candle breaking out above or below that range — with a directional close and a meaningful body — triggers an inside bar breakout marker. A controllable toggle allows you to enable or disable this pattern type independently. Momentum Shift (3-Bar Reversal) Two consecutive candles in one direction followed by a third candle that breaks the prior candle's extreme and closes with a body ratio above 0.5. This pattern captures short-term momentum reversals within the context of a broader structure. Strong Directional Candle A candle with a body ratio above 0.65 and a body size exceeding the average body — used as a supplementary structural signal within the confluence engine. Pattern markers are context-filtered — they only appear when occurring at a key level, aligned with the trend structure, or accompanied by a bounce/rejection confirmation. This eliminates random pattern signals in the middle of nowhere. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ III. Institutional Footprint — Tracking Large Money Flow Retail price action alone does not tell the full story. AlphaX Prism tracks two types of institutional activity that are invisible to most traders: Institutional Candles — Directional Large-Body Moves A bullish or bearish candle whose body exceeds the 20-bar average body by a configurable multiplier (default: 1.8×) Volume exceeds the moving average by a configurable multiplier (default: 1.3×) Body ratio above 0.55, with a close in the upper or lower third of the range — confirming directional conviction These appear as bright colored dots at the bottom of the chart (yellow-green for bull, red for bear) Absorption Candles — Hidden Accumulation and Distribution A large wick (more than 2× the body) with high volume — indicating large orders absorbing supply or demand without a visible directional body The wick must be at least 1.5× larger than the opposing wick, and the candle range must exceed the ATR minimum These appear as dimmer dots at the bottom of the chart — subtler activity, but often a precursor to a directional move Volume Spikes — when high volume occurs without an institutional candle pattern, a neutral gray dot appears — flagging elevated participation without clear directional conviction. Institutional activity feeds into the confluence engine and acts as a significant signal amplifier when aligned with price action and key levels. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📊 Two Signal Layers AlphaX Prism produces two distinct signal types, each serving a specific role in the trade lifecycle: 1 ─ Entry Signals (▲ / ▼) Entry signals are generated when the confluence engine determines that enough independent factors are aligned simultaneously. A bullish entry (▲) or bearish entry (▼) label appears offset from the bar with a dotted connector line for visual clarity. Entry signals require ALL of the following to fire: Confluence score meets or exceeds the minimum threshold (default: 4 out of 10 factors) A qualifying Price Action pattern is present A structural reason exists (key level, institutional candle, or trend context) The candle is clean — not overextended, not at an RSI extreme, and with a meaningful body ADX confirms a trending environment (not a ranging, directionless market) Signal cooldown has elapsed since the last signal When both bull and bear conditions trigger simultaneously, the higher-confluence side wins. If scores are equal, no signal fires — tie goes to caution. 2 ─ Exit Signals (✕) Exit signals fire after an entry signal has been established and a reversal condition develops. They are filtered by the same cooldown as entries to prevent rapid oscillation. Long Exit — price reaches a resistance zone and a bearish engulfing forms, or the trend shifts down with price below the medium EMA and MACD bearish, or an institutional selling candle closes below the fast EMA, or RSI is overbought with a bearish pattern Short Exit — the inverse of the above conditions for a long exit Exit signals indicate that the momentum behind the current trade is deteriorating. Use them to take partial or full profit, or to tighten your stop loss ahead of a potential reversal. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🧠 10-Factor Confluence Scoring System Every bar is evaluated against ten independent confluence factors — each one a separate reason to consider a trade. Only setups where enough factors align simultaneously are displayed. The 10 Confluence Factors: 1. Key Level — price is bouncing from support or rejecting resistance (highest weight) 2. Price Action Pattern — any qualifying PA pattern is present 3. Strong Pattern Bonus — engulfing or momentum shift (higher-conviction PA types) 4. Institutional Activity — institutional candle or absorption present in signal direction 5. Trend Structure — swing-based trend direction (HH/HL or LL/LH) aligns with signal 6. MACD Momentum — MACD line above/below signal line and histogram expanding in signal direction 7. RSI Alignment — RSI slope rising/falling within the mid-range zone (not extreme) 8. RSI Divergence — price makes a new extreme but RSI does not confirm, signaling exhaustion 9. Volume — current volume exceeds the moving average in the signal direction 10. EMA Alignment — fast, medium, and slow EMAs are stacked in the signal direction, or price is positioned correctly relative to the 200 EMA The score (0–10) is displayed in the dashboard alongside a weighted confidence percentage (0–100%) and a letter grade (D through A+). ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🎯 Weighted Confidence Engine In addition to the 10-factor binary confluence score, AlphaX Prism computes a weighted confidence percentage that assigns different point values to each factor based on its structural importance. Bull / Bear Confidence Scoring Breakdown: Bounce from Support / Rejection from Resistance — up to 18 points (the single most important condition in price action trading) Price at Key Level without confirmed bounce/rejection — 12 points PA Pattern Type — Engulfing: 14 pts | Momentum Shift: 12 pts | Pin Bar: 10 pts | Inside Bar Break: 8 pts Institutional Candle — 12 points | Absorption: 8 points Trend Structure Aligned — 10 points | Structural confirmation only: 6 points MACD Momentum — both line and histogram aligned: 6 pts | line only: 3 pts RSI Slope in Range — 5 points RSI Divergence — 8 points Volume Spike — 6 points | Above average: 3 points EMA Trend Fully Aligned — 8 points | Price above/below 200 EMA only: 3 points ADX Strong — 6 points Penalty Deductions: RSI at opposite extreme — -12 points (signal in wrong RSI zone) Counter-trend direction — -15 points (trading against the established structure) ADX weak / no trend — -6 points Price overextended from EMA — -8 points No PA pattern at all — -10 points (structure without a trigger is not enough) Below average volume — -4 points Letter Grade Scale: A+ — 70% and above: exceptional confluence, all major factors aligned A — 55–69%: high-quality setup with strong structural backing B — 40–54%: good setup with most factors aligned C — 25–39%: marginal setup, use caution and tighter risk management D — below 25%: weak confluence, typically filtered out before display ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📐 EMA System Three Exponential Moving Averages provide structural context for trend bias and signal filtering: Fast EMA (21) — yellow-green cross markers — the immediate momentum reference. When price holds above the Fast EMA, intrabar momentum favors longs. Medium EMA (50) — gray line — the intermediate trend filter. Slope direction confirms trend momentum across recent bars. Slow EMA (200) — dark gray line, thicker — the structural backbone. Price position relative to the 200 EMA contributes to the confidence score and defines the macro bias. EMA Fan Analysis: All three EMAs fanning outward in order (Fast > Medium > Slow for bullish) — healthy trend, re-entry signals carry higher confidence EMAs converging — trend is weakening, expect chop or reversal EMAs tangled and flat — range-bound market, step aside and wait for structure to return ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📊 Trend Structure Detection AlphaX Prism tracks swing-based market structure using configurable pivot detection: Uptrend (▲ UPTREND) — confirmed when the most recent significant high is higher than the prior high AND the most recent significant low is higher than the prior low (Higher Highs + Higher Lows) Downtrend (▼ DOWNTREND) — confirmed when the most recent significant high is lower than the prior high AND the most recent significant low is lower than the prior low (Lower Highs + Lower Lows) A configurable cooldown prevents label spam during choppy structure transitions The trend structure direction is used as a directional filter and adds directly to the confluence score. Signals trading against the identified structure receive a significant confidence penalty. ADX is calculated alongside the swing structure to confirm whether the trend has sufficient momentum. The ADX threshold (default: 22) prevents signals from firing during flat, low-conviction periods — regardless of how many other factors align. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📈 RSI Divergence Detection AlphaX Prism includes a built-in RSI divergence scanner that runs continuously alongside all other analysis: Bullish Divergence — price makes a lower low but the RSI pivot low is higher than the prior RSI low — indicating weakening bearish momentum Bearish Divergence — price makes a higher high but the RSI pivot high is lower than the prior RSI high — indicating weakening bullish momentum Divergences are validated against pivot lookback windows to ensure they represent meaningful structural shifts rather than random oscillator noise. When detected, they are marked with small diamond shapes and contribute up to 8 points to the confidence score. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🚀 How to Trade with AlphaX Prism — Step by Step Step 1 — Read the Dashboard Check PRICE POSITION: Is price bouncing from support, rejecting resistance, or between levels? Check TREND: Is structure bullish, bearish, or ranging? Check ADX: Is there a trending environment, or is it weak and directionless? Check PA PATTERN: Is there a qualifying candle pattern on the current bar? If VERDICT reads "WEAK TREND — WAIT" or "NO PA PATTERN — WAIT" → do not enter. Preserve capital. Step 2 — Wait for an Entry Signal A ▲ or ▼ signal label appears when all mandatory conditions are met Check the dashboard for the BULL SCORE or BEAR SCORE and the letter grade — higher grades represent cleaner, higher-probability setups An A or A+ grade at a confirmed key level with institutional activity is the highest-conviction setup the system can produce Step 3 — Confirm the Setup Manually Review FACTORS in the dashboard — which of the 10 conditions are confirmed? Look for a Bounce from Support or Rejection from Resistance as the anchor Verify that volume is above average and the institutional footprint dots support the direction Place your stop loss beyond the recent swing high/low or beyond the key level zone Step 4 — Manage the Trade Monitor the dashboard for changes in trend, RSI state, and institutional flow If the VERDICT shifts from your trade direction, begin tightening your stop loss Use subsequent entry signals in the same direction as opportunities to add to a winning position Step 5 — Exit on the ✕ Mark When an exit marker appears, the system has detected a counter-trend structural condition Take partial or full profit Do not immediately reverse — wait for a new entry signal in the opposite direction before committing to a new trade ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚡ Key Features 🏗 Automatic Key Level detection with zone merging, touch counting, and age management 🕯 Five Price Action pattern types — Engulfing, Pin Bar, Inside Bar Breakout, Momentum Shift, and Strong Directional Candle 🏦 Institutional footprint tracking — directional institutional candles and absorption patterns with volume validation 🧠 10-factor confluence binary score + weighted percentage confidence engine with A+ to D letter grading 📐 Three EMAs (21 / 50 / 200) for structural context, fan analysis, and trend bias 📉 Swing-based trend structure detection with HH/HL and LL/LH logic and a configurable trend label cooldown ⚡ ADX integration — prevents signals from firing in low-conviction, ranging environments 💎 RSI divergence scanner — continuously monitors for bullish and bearish momentum divergence 📊 MACD momentum engine — directional and histogram-based momentum alignment ✕ Context-aware exit signals — fire only after an active entry and only under specific structural reversal conditions 🖥 Fully featured dashboard — price position, PA pattern, institutional activity, trend, EMA, RSI, volume, confluence scores, verdict, and last signal details all in one panel 🎨 Cohesive dual-tone color theme — yellow-green for bullish, red for bearish, gray for neutral and weak conditions 🔔 8 alert conditions — long/short signals, engulfing at key levels, institutional candles, and RSI divergences ⚙ Fully configurable — all swing lengths, thresholds, ATR multipliers, confluence minimums, EMA periods, colors, and display toggles are adjustable from the settings panel ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚙ Settings Reference Key Levels Key Level Swing Length — pivot detection lookback for support/resistance identification (default: 8) Merge Zones (x ATR) — how close two levels must be to merge into a single zone (default: 1.2× ATR) Max Active Zones — maximum number of key level zones displayed simultaneously (default: 6) Zone Max Age (bars) — how many bars before a zone is retired and removed (default: 250) Show Key Level Zones — toggle zone box fills Show Key Level Lines — toggle dotted center lines Min Touches to Confirm — how many interactions before a zone is considered confirmed and color-coded (default: 2) Price Action Show PA Pattern Markers — toggle all price action pattern markers Min Body Ratio (Engulf) — minimum body-to-range ratio required for engulfing patterns (default: 0.4) Pin Bar Wick Ratio — minimum wick-to-body ratio required for pin bars (default: 2.5) Show Inside Bar Breakouts — enable/disable inside bar breakout signals Show Momentum Shift — enable/disable 3-bar momentum shift detection Institutional Flow Inst. Body Size (x Avg) — body size multiplier required for institutional candle detection (default: 1.8) Inst. Volume (x Avg) — volume multiplier required for institutional candle detection (default: 1.3) Show Institutional Candles — toggle all institutional footprint dots Trend Context Trend Swing Length — pivot lookback for trend structure HH/HL/LL/LH detection (default: 12) Show Trend Shift Labels — toggle UPTREND/DOWNTREND structural labels Trend Label Cooldown — minimum bars between consecutive trend labels (default: 18) ADX Length — period for ADX trend strength calculation (default: 14) ADX Trend Threshold — minimum ADX value required to permit signal generation (default: 22) Momentum RSI Length — period for RSI calculation (default: 14) Show RSI Divergence — toggle the RSI divergence scanner and markers Volume Volume MA Length — period for volume moving average used in all volume comparisons (default: 20) EMA Settings Show Fast / Medium / Slow EMA — individual visibility toggles for each EMA Fast EMA Length — default: 21 Medium EMA Length — default: 50 Slow EMA Length — default: 200 Confluence Engine Min Confluence Score — minimum number of the 10 factors required to permit signal generation (default: 4) Show Entry Signals — toggle all ▲ / ▼ entry signal labels Signal Cooldown (bars) — minimum bars between consecutive signals (default: 12) Show Exit Signals — toggle all ✕ exit signal markers Display Show Dashboard — toggle the full dashboard panel Dashboard Position — Top Right / Top Left / Bottom Right / Bottom Left Dashboard Text Size — Tiny / Small / Normal Dashboard Background — configurable background color Theme Colors Bull Primary / Bright / Dim — the yellow-green family for all bullish elements Bear Primary / Bright / Dim — the red family for all bearish elements Support / Resistance / Neutral Zone Colors — configurable zone color scheme Pattern Color — marker color for price action pattern labels Institutional Color — dot color for institutional footprint markers Individual EMA Colors — Fast (yellow-green), Medium (gray), Slow (dark gray) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔔 Alert Conditions Prism Long Signal — fires when a confirmed ▲ entry signal appears Prism Short Signal — fires when a confirmed ▼ entry signal appears Engulf at Support — fires when a bullish engulfing pattern forms at a confirmed support zone Engulf at Resistance — fires when a bearish engulfing pattern forms at a confirmed resistance zone Institutional Buying — fires when an institutional bullish candle is detected Institutional Selling — fires when an institutional bearish candle is detected RSI Bull Divergence — fires when a confirmed bullish RSI divergence is detected RSI Bear Divergence — fires when a confirmed bearish RSI divergence is detected All alert messages include {{ticker}} and {{interval}} placeholders for clean webhook and bot integration. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🎯 Default Settings — Optimized For The default configuration is tuned for intraday trading on XAUUSD, forex majors, and indices (NAS100, US30, SPX500) on timeframes from M1 to H1. For best results across different instruments: Higher timeframes (H1, H4) — increase Trend Swing Length to 18–25, increase Min Confluence to 5–6, increase Signal Cooldown to 20–30 Volatile instruments (Gold, NAS100) — use defaults or increase ADX threshold to 25 for tighter trend filtering Forex majors (EURUSD, GBPUSD) — reduce Inst. Body Size multiplier to 1.5, keep defaults otherwise Calmer instruments — reduce ADX threshold to 18–20, reduce Min Confluence to 3 Fewer, cleaner signals — increase Min Confluence Score, increase ADX Threshold, increase Signal Cooldown More frequent signals — decrease Min Confluence Score to 3, decrease Signal Cooldown to 8, reduce ADX Threshold to 18 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 👥 Who This Is For 🥇 Price action traders — built on the foundations of PA trading: key levels, candlestick patterns, and structural context, with no dependence on arbitrary indicator signals 🏦 Traders who want to track institutional activity — the footprint engine highlights where large money is likely entering and exiting the market 📊 Confluence-based traders — the 10-factor scoring system provides a systematic, quantified framework for evaluating setups rather than relying on intuition alone 🧠 Systematic and discretionary traders alike — the dashboard makes every condition transparent and readable at a glance, while the alert system supports fully automated notification workflows 📈 Traders who struggle with overtrading — the mandatory ADX filter, PA pattern requirement, and minimum confluence threshold physically prevent weak or unqualified setups from generating signals 🎨 Traders who value clean, uncluttered charts — all elements follow a cohesive color theme, and the system is designed to show you only what matters, when it matters ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📝 Notes All signals are calculated on bar close — AlphaX Prism is non-repainting. A signal that appears will not disappear on the next bar. The key level zone boxes extend to the right edge of the chart in real time. As new bars form, zones that have aged beyond the maximum bar count are automatically removed. RSI divergence detection uses a 5-bar pivot lookback on each side — divergences are confirmed only when the current bar is within 3 bars of the pivot, and the two pivots are between 5 and 50 bars apart, ensuring only meaningful divergences are flagged. Designed for M1 through H1 timeframes. On daily or weekly charts, the ADX and confluence filters still function, but key level zone density may need adjustment via the swing length and max zones settings. Maximum 500 labels and 500 boxes are used — on very low timeframes with extended chart history, oldest elements may be automatically removed by TradingView's rendering limits. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚠ Disclaimer This indicator is a technical analysis and visualization tool intended for educational and informational purposes only. It does not constitute financial advice or a recommendation to buy or sell any financial instrument. All signals are generated from historical and real-time price data using mathematical calculations — their accuracy or profitability is not guaranteed. Past performance of any signal type does not guarantee future results. Always conduct your own analysis, use proper risk management, and consult a licensed financial advisor before making any trading decisions. The author accepts no responsibility for any losses incurred from the use of this indicator. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Built for traders who trade what they see — not what they hope.
Pine Script® 인디케이터
AlphaX-Trade의
Inside / Outside BarsThis indicator highlights Inside Bars and Outside Bars directly on the chart, helping identify consolidation and expansion phases in price action. Key Features: Inside Bar Detection An Inside Bar is a candle whose high and low are fully contained within the range of the previous candle. This typically signals consolidation, reduced volatility, and potential buildup before a breakout. Outside Bar Detection An Outside Bar is a candle whose high is higher than the previous high and whose low is lower than the previous low. This reflects range expansion, increased volatility, and possible reversal or continuation momentum. Visual Highlighting Inside and Outside Bars are clearly marked on the chart with customizable colors, allowing quick recognition without manual analysis. Clean and Minimal Design -The indicator is designed to avoid clutter, focusing only on key price action signals. -Works on Any Market -Can be applied to crypto, forex, stocks, and indices. Use Cases: -Identify breakout setups after consolidation (Inside Bars) -Spot volatility expansion and potential reversals (Outside Bars) -Combine with higher timeframe levels and liquidity concepts for improved decision-making This tool is built for traders who rely on pure price action and want a clear, automated way to track key candle patterns.
Pine Script® 인디케이터
Iggy-의
Bar Count (Timezone Fixed | Colorful Multiples)Bar Count (Timezone Fixed | Colorful Multiples) This indicator sequentially numbers each bar within a trading day, featuring two key improvements over traditional bar counters: 1. Timezone Fixed – No More Noon Reset Uses the exchange’s timezone to detect a new trading day ( time("D", syminfo.timezone) ), rather than local time or calendar date. The counter resets only at the exchange’s actual session start, eliminating the common issue where numbers reset at noon due to timezone differences or lunch breaks. 2. Colorful Multiples – Highlight Key Intervals Supports custom colors for bars at specific multiples (e.g., every 12th, 24th bar). Visual markers help you easily identify repeating cycles, important time windows, or rhythm points without manual calculation. Input Parameters Label Size : Text size (Auto/Huge/Large/Normal/Small/Tiny) Display at every X bars : Show label every X bars (set to 1 for every bar) Default Color : Default label color every N bars : The multiple interval (e.g., 12 for every 12th bar) N bars Color : Color for bars at the specified multiple Use Case Ideal for intraday traders, especially those trading futures, forex, or indices with overnight sessions or lunch breaks. The timezone fix ensures accurate continuous numbering, while the color-coded multiples provide visual cues for recurring intervals. 本指标为图表上的每根 K 线按交易日顺序连续编号，并针对传统同类指标的痛点进行了两项关键改进： 1. 时区修正，告别中午重置 使用交易所时区判断新交易日（ time("D", syminfo.timezone) ），而非本地时间或自然日。无论图表时区如何设置，编号仅在交易所实际开盘时重置，彻底解决因午休、时区偏移导致的中午 12:00 后序号从 1 开始的错误。 2. 彩色倍数，关键节点一目了然 支持为指定倍数的 K 线（如每 12 根、每 24 根）设置独立颜色。通过直观的色彩标记，轻松识别固定周期循环（如每 12 根 K 线）、时间窗口或重要节奏点，无需额外计算。 输入参数 Label Size ：标签文字大小（自动/特大/大/正常/小/微小） Display at every X bars ：每 X 根 K 线显示一次编号（设为 1 则每根显示） Default Color ：默认标签颜色 every N bars ：倍数间隔（例如 12 表示每 12 根 K 线使用特殊颜色） N bars Color ：倍数序号的标签颜色 适用场景 日内交易者、期货、外汇、指数等有夜盘或午休的品种，确保编号连续准确；同时通过颜色区分固定周期，辅助识别关键时间节点。
Pine Script® 인디케이터
trad7595의
AG Pro Price Acceptance Profile [AGPro Series]AG Pro Price Acceptance Profile OVERVIEW AG Pro Price Acceptance Profile is a price-structure tool designed to reveal where the market is spending time, where it is repeatedly returning, and where it is rejecting price efficiently. Instead of using volume distribution, signal arrows, or breakout-style triggers, this script builds an acceptance/rejection map from price-time interaction inside a rolling lookback window. The goal is simple: make it easier to identify where price is being accepted, where it is being rejected, and whether current price is trading inside balance or at its outer edges. This is not a volume profile clone, not a support/resistance line generator, and not a momentum signal script. It focuses on one specific question: Which price areas are currently showing repeated acceptance, and which areas are failing to hold price? That narrow focus is intentional. The script is built as an analytical context tool rather than an entry engine. UNIQUE EDGE The core idea is to measure acceptance through price-time behavior rather than centralized volume data. The profile logic evaluates how often price revisits a zone, how long it tends to remain there, and how efficiently it exits that zone. This creates a structured map of: - Acceptance zones - Rejection zones - The active balance area - The current market state relative to that balance Because the methodology is based on price persistence and revisit behavior, the script can be useful on markets where volume-based profiling is either unavailable, fragmented, or not the preferred analytical lens. METHODOLOGY The script divides the rolling price range into rows and evaluates each row using multiple internal dimensions derived from recent bars: 1) Time at price Measures how frequently the market occupies each row across the selected lookback. 2) Revisit density Tracks how often price returns to a row after leaving it. Repeated revisits can indicate ongoing acceptance or unfinished balancing behavior. 3) Dwell persistence Approximates whether the market tends to spend stable time in an area rather than only touching it briefly. 4) Rejection speed Measures how efficiently price exits an area after interaction. Faster and cleaner exits tend to support rejection classification. 5) Balance mapping Uses the strongest acceptance region to define the current balance area and then classifies the live market location relative to it. The result is a simplified profile-style framework built from price behavior itself. HOW TO READ IT The large balance area highlights the current acceptance region derived from the profile engine. Acceptance zones mark price areas that showed stronger persistence, repeated interaction, and better structural acceptance within the chosen lookback. Rejection zones mark areas where price interacted but failed to remain stable, leading to less durable occupation and faster displacement. The panel is designed to summarize the current profile state: - Acceptance Strength: relative quality of the dominant accepted area - Revisit Density: how actively the market is returning to profiled zones - Balance Width: width of the accepted region relative to the full profiled range - Rejection Speed: how efficiently price is leaving unstable areas - Location: whether current price is inside, above, or below balance In practice, traders can use the script to distinguish between stable trade location and unstable trade location, instead of treating every nearby level as equally important. KEY INPUTS Lookback Controls how much recent history is used to build the profile. Rows Defines profile resolution. Higher values increase granularity but can also make the map more sensitive. Acceptance Threshold / Rejection Threshold Adjust how selective the script is when classifying stronger acceptance and rejection areas. Maximum Acceptance / Rejection Zones Controls chart density and visual focus. Panel and label settings Allow adaptation for different chart layouts and screen sizes. LIMITATIONS AND TRANSPARENCY This script does not predict future price movement. It does not generate guaranteed reversal points. It does not replace execution logic or risk management. Acceptance and rejection are contextual measurements derived from the selected lookback and row resolution. Different settings can produce different maps because the profile is adaptive by design. As with any charting tool based on rolling historical context, zones may evolve when older bars leave the lookback window and new bars enter it. This script is best used as a contextual framework for market location, not as a standalone trade mandate. RISK DISCLOSURE This indicator is for analytical and educational use only. It does not provide financial advice, investment advice, or trading guarantees. All trading decisions remain the responsibility of the user.
Pine Script® 인디케이터
AGProLabs의
1
Gold Scalper V4.2GOLD SCALPER V4.2 — GOLD (XAUUSD) SCALPING GUIDELINE Kalman Filter + Double Bollinger Bands + 3-Confluence System Version 4.2 PART 1 — WHAT IS THIS INDICATOR? GOLD SCALPER V4.2 is a scalping tool built exclusively for Gold (XAUUSD). It combines three components: COMPONENT | WHAT IT DOES Kalman Filter | Smooths price baseline mathematically. Filters Gold's news spikes without lag. SCALPER Architecture | Creates 3 price zones: Sell / Neutral / Buy. Identifies statistically extreme positions. 3-Confluence System | Requires 3 conditions before firing a signal. Filters signals during band-walking. PART 2 — THE THREE ZONES ON THE CHART The chart is always divided into three labeled zones. Each zone tells you exactly what to do. 🔴 SELL ZONE — Price > BB2 Upper — Overbought DO NOT BUY here. Look for SELL only. Deeper in zone = potential reversal area. ⚪ NEUTRAL ZONE — Inside BB1 bands — Normal range No extreme condition. WAIT. Do not trade here. 🟢 BUY ZONE — Price < BB2 Lower — Oversold DO NOT SELL here. Look for BUY only. Deeper in zone = potential reversal area. VOLUME GRADIENT (Zone fill color): • Vibrant / saturated color → Strong volume conviction → Potential signal • Faded / pale color → Weak volume → WAIT, skip signal PART 3 — ENTRY, TARGETS, AND STOP LOSS Logic: Price moves to one extreme zone → target is the OPPOSITE extreme zone. Bollinger Bands are mean-reverting by math. ── BUY SETUP (Entry from Green BUY ZONE) ───────────────────── • Entry → Close of signal candle (below BB2 Lower) • TP1 (50%) → LTF BB1 Upper (close HALF your position here) • TP2 (50%) → LTF BB2 Upper (close remaining half here) • Stop Loss → LTF BB2 Lower × 0.998 (0.2% buffer below band) ── SELL SETUP (Entry from Red SELL ZONE) ───────────────────── • Entry → Close of signal candle (above BB2 Upper) • TP1 (50%) → LTF BB1 Lower (close HALF your position here) • TP2 (50%) → LTF BB2 Lower (close remaining half here) • Stop Loss → LTF BB2 Upper × 1.002 (0.2% buffer above band) NOTE: All four levels (Entry, TP1, TP2, SL) are drawn automatically on the chart as lines and labels when a signal fires. You do not need to calculate them manually. PART 4 — THE 3-CONFLUENCE SIGNAL SYSTEM A signal (▲ BUY or ▼ SELL) fires ONLY when ALL THREE conditions align at the same time. Missing even one = no signal fires. ── CONDITION 1: Statistical Exhaustion (The Zone) ──────────── • BUY → Price must close BELOW LTF BB2 Lower • SELL → Price must close ABOVE LTF BB2 Upper This confirms price has entered statistically extreme territory. An internal latch is set and stays active until price returns inside the BB1 bands (signal cycle complete). ── CONDITION 2: Momentum Shift (The Slope) ─────────────────── • BUY → LTF BB2 Lower band is RISING (current > previous bar) • SELL → LTF BB2 Upper band is FALLING (current < previous bar) *** THIS IS THE MOST IMPORTANT CONDITION *** Gold often "walks the band" — price stays in the extreme zone for many bars during strong trends. Condition 2 prevents entries during band-walking by waiting for the band itself to reverse. ── CONDITION 3: Macro Trend Filter (HTF) ───────────────────── • BUY → Current price must be ABOVE the HTF Basis line • SELL → Current price must be BELOW the HTF Basis line This ensures you trade WITH the macro trend, not against it. ── SIGNAL RESET LOGIC ──────────────────────────────────────── • After BUY fires → No new BUY until price returns above BB1 Lower (LTF + HTF) • After SELL fires → No new SELL until price returns below BB1 Upper (LTF + HTF) This prevents duplicate signals during a single move. PART 5 — STEP-BY-STEP TRADE EXECUTION ── BEFORE THE SESSION ──────────────────────────────────────── 1. Open XAUUSD chart with the indicator applied. 2. Set the correct HTF Timeframe in Settings. 3. Check the time — avoid trading 15 min before/after major USD news. 4. Confirm you are in an active session: - London Open → 08:00–10:00 GMT - NY Open → 13:00–17:00 GMT ── FINDING THE SETUP ───────────────────────────────────────── 1. Is price above or below the HTF Basis line? - Above HTF Basis → BULLISH macro → BUY setups only today - Below HTF Basis → BEARISH macro → SELL setups only today 2. Wait for price to enter the matching extreme zone: - Bullish day → Wait for price to enter 🟢 BUY ZONE - Bearish day → Wait for price to enter 🔴 SELL ZONE 3. Check the zone fill color: - Vibrant saturated color → Strong volume → Proceed - Faded pale color → Weak volume → Wait more 4. Wait for the signal triangle: - ▲ green triangle → BUY signal confirmed - ▼ red triangle → SELL signal confirmed ── ENTERING THE TRADE ──────────────────────────────────────── 1. Enter at market price on close of signal candle. 2. Set Stop Loss, TP1, and TP2 at the lines shown on chart. ── MANAGING THE TRADE ──────────────────────────────────────── 1. TP1 hit → Close 50% of position and move SL to Break Even. 2. TP2 hit → Close remaining 50%. Trade complete. 3. SL hit → Accept the loss. ★ GOLDEN RULE: Never let a winning trade turn into a loss. PART 6 — THE VOLUME GRADIENT EXPLAINED READING THE COLOR: • Deep saturated GREEN in BUY zone → Strong buying pressure → Potential BUY signal • Faded pale GREEN in BUY zone → Weak volume → Lower probability • Deep saturated RED in SELL zone → Strong selling pressure → Potential SELL signal PRACTICAL RULE: Only trade when the zone fill is vibrant. PART 7 — TIMEFRAME SETTINGS FOR GOLD CHART TF | HTF SETTING 1 minute | 5 minutes 3 minutes | 15 minutes 5 minutes | 15 minutes 15 minutes | 1 Hour 1 Hour | 4 Hours RECOMMENDED START: 15-minute chart + 1-Hour HTF. LTF BAND SETTINGS: • Length → 20 bars • Inner Multiplier → 1.0 • Outer Multiplier → 2.0 HTF BAND SETTINGS: • Length → 20 bars • Inner Multiplier → 1.5 • Outer Multiplier → 2.25 PART 8 — RISK MANAGEMENT RULES • RULE 1 — POSITION SIZING: Never risk more than 1–2% of account per trade. • RULE 2 — NEWS AVOIDANCE: Avoid new trades 15 minutes BEFORE and AFTER major news. • RULE 3 — DAILY LOSS LIMIT: If you lose 3 trades in a row → STOP for the day. • RULE 4 — MINIMUM RISK/REWARD: Only enter trades where RRR is 1.5:1 or better. • RULE 5 — SESSION AWARENESS: Best hours: London Open (08:00–10:00), NY Open (13:00–15:00), Overlap (13:00–17:00). • RULE 6 — TREND ALIGNMENT IS NON-NEGOTIABLE: HTF Bearish → SELL only. HTF Bullish → BUY only. PART 9 — COMMON MISTAKES TO AVOID MISTAKE | HOW TO AVOID Trading against HTF trend | Check HTF Basis direction FIRST. Entering in Neutral Zone | Only enter in Sell Zone or Buy Zone. Ignoring volume gradient | Faded fill = low conviction. Moving SL further away | Honor the calculated SL. Period. Not taking TP1 | Always close 50% at TP1 and move SL to BE. Chasing missed signals | If you missed the entry candle, skip it. PART 10 — ZONE LABEL SETTINGS The zone labels have fully customizable colors in Settings → Zone Labels. PART 11 — ALERT SETUP (TRADINGVIEW) • Alert 1 → "🟢 BUY Signal | Gold Scalper" • Alert 2 → "🔴 SELL Signal | Gold Scalper" QUICK REFERENCE CARD PRE-TRADE CHECKLIST: HTF Basis direction confirmed? Price is in Sell Zone or Buy Zone? Zone fill color is vibrant / saturated? Signal triangle has appeared? No major news in the next 15 minutes? RRR is 1.5:1 or better? --- Disclaimer: This guideline and the GOLD SCALPER V4.2 indicator are provided for educational purposes only. Trading carries a high level of risk. Always trade with capital you can afford to lose.
Pine Script® 인디케이터
Gold_Trading_Expert의
Signal Qualification Engine [JOAT]Signal Qualification Engine Introduction The Signal Qualification Engine is a sophisticated multi-layer signal filtering system designed to identify high-probability trading opportunities through comprehensive confluence analysis. This indicator solves the universal trading problem of signal quality - not all signals are created equal, and distinguishing between mediocre setups and high-probability opportunities is what separates successful traders from the crowd. By evaluating signals across trend, momentum, volume, and structure layers, this engine provides institutional-grade signal qualification that helps traders focus only on the best opportunities. This tool is built for traders who understand that edge in trading comes from the confluence of multiple factors rather than any single indicator. Whether you're a discretionary trader looking for confirmation, a systematic trader needing signal filtering, or an algorithm developer requiring quality scoring, this engine provides the comprehensive analysis needed to elevate your trading from random signals to systematic, high-quality setups. Why This Indicator Exists Most traders struggle with signal overload - too many signals, varying quality, and no systematic way to evaluate them. This indicator addresses that critical problem by: Multi-Layer Analysis: Evaluates signals across four independent analytical layers Quality Scoring: Provides objective, numerical quality scores for every signal Confluence Detection: Identifies when multiple factors align for high-probability setups Risk/Reward Validation: Ensures signals offer adequate profit potential relative to risk Premium Signals: Flags exceptional setups with maximum confluence Visual Zones: Shows entry zones, stop levels, and targets for clear risk management The engine transforms subjective signal evaluation into an objective, systematic process that can be consistently applied across all market conditions and instruments. Core Components Explained 1. Trend Analysis Layer The trend layer evaluates the directional bias using multiple trend indicators: // Trend scoring int trend_bull_score = 0 int trend_bear_score = 0 // Moving average analysis if price_above_fast_ma trend_bull_score += 1 if price_above_slow_ma trend_bull_score += 1 if ma_bullish_cross trend_bull_score += 1 // ADX analysis if adx > i_adx_thresh trend_bull_score += plus_di > minus_di ? 2 : 0 trend_bear_score += minus_di > plus_di ? 2 : 0 Trend components: Price vs MAs: Position relative to fast and slow moving averages MA Crossovers: Recent trend changes and confirmation ADX Strength: Trend strength above threshold (default 25) Directional Movement: +DI vs -DI for trend direction Trend Score: Cumulative trend strength (0-5 points) The trend layer ensures we only trade in the direction of the established trend or during trend changes with confirmation. 2. Momentum Analysis Layer Momentum is evaluated through multiple oscillators to ensure optimal timing: // Momentum scoring int momentum_bull_score = 0 int momentum_bear_score = 0 // RSI analysis if rsi > 50 and rsi < 70 and rsi > rsi momentum_bull_score += 1 if rsi < 50 and rsi > 30 and rsi < rsi momentum_bear_score += 1 // Stochastic analysis if stoch_k > stoch_d and stoch_k < 80 momentum_bull_score += 1 if stoch_k < stoch_d and stoch_k > 20 momentum_bear_score += 1 // MACD analysis if macd_hist > 0 and macd_hist > macd_hist momentum_bull_score += 1 if macd_hist < 0 and macd_hist < macd_hist momentum_bear_score += 1 Momentum components: RSI Direction: Momentum direction with overbought/oversold filters Stochastic Crossovers: Entry timing with extreme level avoidance MACD Histogram: Trend acceleration and deceleration Momentum Score: Cumulative momentum strength (0-3 points) Divergence Detection: Price/momentum divergences for early signals The momentum layer ensures we enter when momentum supports our directional bias. 3. Volume Analysis Layer Volume confirms the strength and conviction behind price movements: // Volume analysis float vol_sma = ta.sma(volume, 20) float vol_ratio = vol_sma > 0 ? volume / vol_sma : 1.0 bool above_avg_vol = volume > vol_sma * 1.2 bool high_vol_session = session_vol_ratio > 1.5 // Volume scoring int volume_score = 0 if above_avg_vol volume_score += 1 if high_vol_session volume_score += 1 if vol_ratio > 1.5 volume_score += 1 Volume components: Volume Ratio: Current volume relative to 20-period average Above Average Volume: Confirms signal strength (20% above average) Session Volume Analysis: Compares current volume to historical session averages Volume Score: Cumulative volume confirmation (0-3 points) Volume Spike Detection: Exceptional volume that may signal institutional activity The volume layer ensures signals have sufficient participation to be reliable. 4. Structure Analysis Layer Structure identifies key levels where professional traders place orders: // Structure analysis float swing_high = ta.pivothigh(high, i_swing_left, i_swing_right) float swing_low = ta.pivotlow(low, i_swing_left, i_swing_right) bool near_resistance = math.abs(close - nearest_resistance) / close * 100 < i_level_proximity bool near_support = math.abs(close - nearest_support) / close * 100 < i_level_proximity bool sweep_high = high > nearest_resistance and close < nearest_resistance bool sweep_low = low < nearest_support and close > nearest_support Structure components: Swing Points: Key highs and lows defining market structure Level Proximity: Distance to nearest support/resistance Liquidity Sweeps: Price moves beyond levels that quickly reverse Break of Structure: Confirms trend changes Structure Score: Cumulative structural confirmation (0-3 points) The structure layer ensures entries occur at technically significant levels. 5. Signal Qualification System All layers combine to produce a comprehensive qualification score: // Total scores (max 14) int bull_total = ( trend_bull_score + momentum_bull_score + volume_score + structure_score + (near_support ? 1 : 0) + (sweep_low ? 1 : 0) + (rr_ratio >= i_min_rr ? 1 : 0) ) int bear_total = ( trend_bear_score + momentum_bear_score + volume_score + structure_score + (near_resistance ? 1 : 0) + (sweep_high ? 1 : 0) + (rr_ratio >= i_min_rr ? 1 : 0) ) Qualification criteria: Trend Score (0-5 points): Directional bias strength Momentum Score (0-3 points): Timing confirmation Volume Score (0-3 points): Participation confirmation Structure Score (0-3 points): Level confirmation Level Proximity (1 point): Entry at key level Liquidity Sweep (1 point): Institutional activity Risk/Reward (1 point): Adequate profit potential Maximum Score: 14 points for perfect confluence 6. Quality Grading System Signals are graded based on their qualification score: // Quality grades string bull_grade = bull_total >= 12 ? "A+" : bull_total >= 10 ? "A" : bull_total >= 8 ? "B" : bull_total >= 6 ? "C" : "D" string bear_grade = bear_total >= 12 ? "A+" : bear_total >= 10 ? "A" : bear_total >= 8 ? "B" : bear_total >= 6 ? "C" : "D" Grade meanings: A+ (12-14 points): Exceptional setup with maximum confluence A (10-11 points): High-quality setup with strong confluence B (8-9 points): Good setup with moderate confluence C (6-7 points): Acceptable setup with basic confluence D (0-5 points): Weak setup, avoid trading Only B-grade and above signals are typically considered for trading. 7. Risk/Reward Validation Each signal is validated for adequate profit potential: // Risk/Reward calculation float atr_val = ta.atr(14) float stop_distance = atr_val * i_stop_mult float target_distance = atr_val * i_target_mult float rr_ratio = target_distance / stop_distance // RR validation bool valid_rr = rr_ratio >= i_min_rr RR features: ATR-Based Stops: Dynamic stop placement based on volatility Multiple Targets: Primary and secondary profit targets Minimum RR Ratio: Configurable minimum (default 1.5:1) RR Validation: Signals without adequate RR are disqualified Visual Targets: Clear stop and target levels on chart Visual Elements Signal Markers: Clear entry signals with quality grades Entry Zones: Shaded areas showing optimal entry regions Risk Levels: Visual stop loss and target levels Quality Meter: Real-time confluence score display Background Colors: Signal strength background shading Dashboard: Comprehensive metrics panel Premium Signals: Special markers for A+ grade setups The dashboard displays: 1. Current signal qualification scores 2. Quality grades and confluence percentages 3. Individual layer scores (trend, momentum, volume, structure) 4. Risk/Reward ratio and validation status 5. Nearest support/resistance levels 6. Volume analysis and session context 7. Signal cooldown status 8. Premium signal indicators Input Parameters Trend Settings: Fast MA Period: Short-term trend (default: 21) Slow MA Period: Medium-term trend (default: 55) ADX Period: Trend strength (default: 14) ADX Threshold: Minimum trend strength (default: 25) Momentum Settings: RSI Period: Momentum oscillator (default: 14) Stochastic K/D: Entry timing (default: 14/3) MACD Fast/Slow/Signal: Trend acceleration (default: 12/26/9) Structure Settings: Swing Left/Right: Pivot point detection (default: 10/5) Level Proximity %: Distance to key levels (default: 0.5%) Max Levels: Maximum swing levels to track (default: 20) Qualification Settings: Minimum Score: Required qualification score (default: 6) Signal Cooldown: Bars between signals (default: 5) Minimum R:R: Required risk/reward ratio (default: 1.5) Require Confirmation: Wait for bar close (default: true) How to Use This Indicator Step 1: Monitor Signal Quality Watch for B-grade or higher signals. A-grade signals offer the highest probability but occur less frequently. Focus on quality over quantity - one A-grade signal is worth ten C-grade signals. Step 2: Verify Layer Alignment Check the dashboard to see which layers are contributing to the signal. The best signals have confirmation from all four layers (trend, momentum, volume, structure). Step 3: Assess Risk/Reward Ensure the signal offers adequate profit potential. The indicator automatically validates RR ratios, but you should manually verify that targets make sense in the current market context. Step 4: Time Entry with Structure Use the entry zones and structure levels to time your entry precisely. The best entries occur when price is near key support/resistance levels or after liquidity sweeps. Step 5: Manage Risk Dynamically Use the visual stop and target levels as guidelines, but adjust based on your personal risk tolerance and account size. Never risk more than you're comfortable losing. Step 6: Track Premium Signals Pay special attention to A+ grade premium signals. These rare setups with maximum confluence often lead to the largest moves and deserve larger position sizes. Best Practices Be patient for A-grade signals rather than forcing mediocre trades Use the qualification score as your primary filter - ignore signals below your minimum threshold Combine with your own analysis for additional confirmation Adjust the minimum score based on market conditions - higher in choppy markets, lower in strong trends Keep a trade journal to track which grade performs best in each market condition Use the cooldown period to avoid overtrading - quality signals require patience Pay attention to volume confirmation - signals without volume support often fail Structure is key - signals at major levels have higher success rates Liquidity sweeps provide high-probatility reversal opportunities Always respect the risk/reward validation - poor RR setups destroy accounts Strategy Integration This indicator is designed to enhance any trading system: Use as a signal filter for existing strategies Import quality scores to weight trade decisions Combine with trend-following systems for entry timing Use structure levels for stop placement in other systems Integrate volume analysis for signal confirmation Apply risk/reward validation to all trades Use premium signals as standalone trade opportunities Export layer scores for custom signal development The indicator includes 12 export functions for integration: Bull/Bear Score Export: Total qualification scores Quality Grade Export: Letter grade as numeric value Trend Score Export: Trend layer score Momentum Score Export: Momentum layer score Volume Score Export: Volume layer score Structure Score Export: Structure layer score RR Ratio Export: Current risk/reward ratio Signal Export: Binary signal output Premium Signal Export: A+ grade signal flag Technical Implementation Built with Pine Script v6 featuring: Multi-layer signal analysis across four independent systems Dynamic qualification scoring with configurable weights Advanced market structure detection with pivot points Volume analysis with session context Risk/reward validation with ATR-based calculations Comprehensive visualization with entry zones and risk levels Real-time dashboard with 12 key metrics Alert conditions for all signal types and grades Export functions for strategy integration Premium signal detection for exceptional setups The code uses confirmed bars for all calculations to prevent repainting and ensure reliable signals. Originality Statement This indicator is original in its comprehensive approach to signal qualification and multi-layer confluence analysis. While individual components (RSI, MACD, ADX, etc.) are established tools, this indicator is justified because: It synthesizes four distinct analytical layers into a unified qualification system The scoring system provides objective, numerical signal evaluation Quality grading transforms subjective analysis into systematic decision-making Risk/reward validation ensures only profitable setups are considered Structure analysis integration provides context for market microstructure Volume layer adds confirmation often missing from signal systems Premium signal detection identifies exceptional opportunities Comprehensive visualization makes complex analysis accessible Export functions enable integration with any trading system Each layer contributes unique insights: trend provides direction, momentum provides timing, volume provides confirmation, and structure provides context The indicator's value lies in transforming signal evaluation from art to science - providing traders with a systematic, objective way to identify and focus only on the highest probability trading opportunities. Disclaimer This indicator is provided for educational and informational purposes only. It is not financial advice or a recommendation to buy or sell any financial instrument. Signal qualification is a tool for improving trade selection, not a guarantee of success. Even high-quality signals can fail due to unexpected market events, news, or changes in market conditions. Past performance of high-grade signals does not guarantee future results. The indicator's signals are mathematical calculations based on historical patterns and should be used in conjunction with proper risk management. Always use stop losses and position sizing appropriate for your account size and risk tolerance. Never risk more than you can afford to lose on any single trade, regardless of signal quality. The author is not responsible for any losses incurred from using this indicator. Users assume full responsibility for all trading decisions made using this system. -Made with passion by officialjackofalltrades
Pine Script® 인디케이터
officialjackofalltrades의
DKJ H/L Levels 2.0Previous High & Low Levels — 4H | Daily | Weekly | Monthly Price action trading, Support & resistance, Mean reversal. Updated version of DKJ H/L Levels A clean, minimal indicator that plots the previous high and low for four key timeframes — 4H, Daily, Weekly, and Monthly — directly on your chart. Levels are displayed as horizontal lines extending left from the current bar, with price labels neatly aligned at the right edge. Designed to give you an immediate read on the most relevant institutional reference points without cluttering the chart. Features: Previous 4H, Daily, Weekly and Monthly highs and lows Fully adjustable line width, style, and length Customisable colours per timeframe Label size and vertical position (above/below) controls Built-in alerts for price crossing any level Best used on: 4H charts and below — 30m and 1H being the sweet spot. Setting alerts: Right-click the indicator name on your chart and select Add alert, or open the Alerts panel and create a new alert In the Condition dropdown, select DKJ H/L Levels Choose Any alert() function call — this covers all timeframes and directions in one alert Set your notification method and click Create Each alert will fire once per bar and tell you exactly which level was crossed and in which direction.
Pine Script® 인디케이터
DarrenKingJohn의
MTF Fair Value GapsMulti-Timeframe Fair Value Gaps (MTF-FVG) with Smart Mitigation Overview The Multi-Timeframe Fair Value Gaps (MTF-FVG) indicator is a high-performance price action tool designed for ICT and SMC (Smart Money Concepts) traders. Unlike standard FVG indicators that limit you to your current view, this script allows you to overlay gaps from up to five additional timeframes simultaneously, providing a "birds-eye view" of institutional liquidity without ever switching charts. Key Features True MTF Integration: Visualize 5m, 15m, 1h, 4h, and Daily FVGs (or your own custom selection) directly on a 1-minute chart. Institutional Alignment: Each FVG is drawn with precision, starting exactly at the wick of the first candle in the 3-bar sequence for professional-grade alignment. Smart Mitigation Engine: To prevent "chart clutter," the indicator automatically detects when price has traded through a zone. Once a gap is mitigated, the script cleans up the box in real-time. Visual Midpoints: Every gap includes an optional dotted midpoint line (Consequent Encroachment), a key level for entries and institutional reactions. Fully Customizable Aesthetic: Includes a refined color palette by default (Grey, Orange, Yellow, Blue, Purple) with 10% shading to ensure your price action remains the focal point. How to Use Confluence Trading: Look for "Stacked FVGs"—areas where a Higher Timeframe (HTF) gap overlaps with a Current Timeframe (CTF) gap. These are high-probability zones for reversals or continuations. Liquidity Re-entry: Use the dotted midpoint line to identify the 50% level (CE) of the gap, where institutions often seek to fill orders. Trend Confirmation: Use HTF gaps to determine the higher-level bias. If a Daily FVG is sitting above price, look for bullish setups on lower timeframes to fill that draw on liquidity. Settings Threshold %: Filter out tiny gaps by setting a minimum percentage size relative to price. Box Extension: Control how far to the right the FVG zones project. Timeframe Toggles: Individually enable or disable the 5 HTF slots. Mitigation Toggle: Choose between keeping historical gaps for reference or auto-deleting them for a cleaner look. Developer Note Built on Pine Script® v6 with dynamic_requests enabled, this indicator is optimized for speed and accuracy. It respects the core logic of the original LuxAlgo FVG detection while expanding it into a powerful multi-timeframe suite. Disclaimer: Trading involves significant risk. This indicator is a tool to assist in technical analysis and does not constitute financial advice.
Pine Script® 인디케이터
kfatkin의
ICT/SMC Sessions + SMT DivergencePro ICT/SMC Structural Suite: Sessions, SMT Divergence & RTH Gaps Overview The ICT/SMC Structural Suite is a highly optimized, "pure structure" indicator designed for traders utilizing Inner Circle Trader (ICT) and Smart Money Concepts (SMC). Unlike traditional indicators that rely on lagging oscillators or moving averages, this script focuses entirely on Time and Price Geometry. It provides an all-in-one visual overlay for institutional trading sessions, Opening Prices, Fair Value Gaps (FVGs), real-time SMT Divergences, and a highly advanced Regular Trading Hours (RTH) Gap engine. It is engineered to be lightweight, incredibly fast, and meticulously anchored to "America/New_York" time to natively handle Daylight Saving Time (DST) shifts without user intervention. Core Features & Technical Breakdown 1. Asset-Aware RTH Gap Engine One of the most complex challenges in charting is accurately mapping the daily RTH gap on continuous Extended Trading Hours (ETH) charts, especially over the weekend. The Logic: This script uses a custom state-management system to bypass the Sunday overnight session on Futures. It isolates the true Regular Trading Hours (session.regular), explicitly locking the Friday close and drawing a dynamic gap box to the Monday 09:30 AM open. Asset-Aware: The engine dynamically reads syminfo.type. If you are trading Futures (e.g., ES/NQ), it tracks the close until 16:15 EST. If you switch to Equities (e.g., AAPL/NVDA), it automatically snaps back to 16:00 EST, preventing after-hours earnings volatility from breaking your gap levels. Quartiles: Automatically calculates and plots the 25%, 50% (Consequent Encroachment), and 75% levels inside the gap. 2. Real-Time Multi-SMT Divergence Traditional divergence indicators wait for a candle to close before signaling. This script utilizes a custom real-time evaluation engine. The Logic: The script establishes historical swing points using a 5-bar pivot lookback (ta.pivothigh / ta.pivotlow). It then compares your active, live tick against those historical pivots. If the current ticker sweeps a previous high/low, but your correlated assets fail to do so, a real-time label flashes on the chart. Customization: Supports up to 5 concurrent assets. Includes a built-in VIX tracker (auto-inversed) and 4 customizable tickers (e.g., NQ, YM, DXY) with toggleable inversion logic. 3. Institutional Time Sessions Visualizes key accumulation and distribution zones via clean, customizable background boxes. Tracks Equity Pre-Market (EPM), London, Asia, and CBDR (Central Bank Dealers Range). DST Proof: All sessions are mathematically forced to America/New_York time in the background, meaning your 09:30 AM open and macro times will never drift when Daylight Saving Time begins or ends. 4. 1st AM FVG Detector Automatically detects and highlights the very first Fair Value Gap (FVG) that forms exclusively during the opening volatility window (09:31 AM – 10:30 AM EST). This box is extended forward in time as a high-probability draw on liquidity or retracement POI for the remainder of the session. 5. ICT Macros & Opening Prices Macros: Highlights the 14 standard ICT Macro windows (e.g., 09:50-10:10, 10:50-11:10) with non-intrusive, bottom-anchored X-axis labels to keep your price action completely uncluttered. Includes an optional End-of-Day (15:15) macro toggle. True Daily Opens: Plots the Midnight (00:00) Open, NY (08:30) Open, and Equity (09:30) Open as extended horizontal rays. 6. Higher Timeframe (HTF) Liquidity Levels Automatically pulls and plots the Previous Day High/Low (PDH/PDL) and Previous Week High/Low (PWH/PWL) without requiring you to change timeframes. How to Use This Script This indicator is not a "buy/sell" signal generator; it is a structural mapping tool designed to give you contextual awareness of institutional order flow. Trading the RTH Gap: The RTH gap box acts as a powerful magnetic zone. Traders can look for price to rebalance into the gap, using the internal 50% line (Consequent Encroachment) as a target or a bounce level. Validating Reversals with SMT: When price pushes into a Higher Timeframe Liquidity Level (like PDH or PWL), look for an SMT Divergence label to appear. If ES sweeps the high but NQ fails to make a higher high, the divergence adds high-probability confluence to a reversal setup. Opening Price Lenses: Use the Midnight and 08:30 Opens as your daily bias gauge. If price is above the Midnight Open, the daily profile is expansive (bullish); look for manipulation moves below the open to accumulate longs (Judas Swing). Under the Hood (For Pine Geeks) This script was heavily refactored for enterprise-grade execution speed. Repetitive drawing logic has been extracted into single-pass functions, state arrays are trimmed using optimized while loops, and request.security calls are fully gated by boolean toggles to prevent API overhead when custom tickers are disabled.
Pine Script® 인디케이터
kfatkin의
2
SMC Crypto Swing Sniper (MTF Edition)The "SMC Crypto Swing Sniper" is an hybrid trading system. It´s evolved it from a pure price-action script into a data-driven order flow and momentum powerhouse. 1. The Macro Compass (Trend & Momentum) Moving away from guessing candle patterns to using hard data: The 4H Dashboard: Tracks Bitcoin, BTC Dominance, USDT Dominance, and your current ticker on a fixed 4H basis. It combines Trend (EMA crossover), RSI, MACD, and ADX/DMI. This instantly tells you if the market has real momentum (BULL/BEAR when ADX > 25) or is just chopping sideways (WEAK when ADX < 25). Fixed Moving Averages: The 4H EMA 50, 4H WMA 200, and the Monthly VWAP dictate your overall macro bias. They are your ultimate directional filter (e.g., only look for long setups if the price is above these levels). 2. The Battlefield (SMC Zones & S/R) This is the Price Action core that tells you exactly WHERE to look for trades: Static 1H Price Filter: Three horizontal lines (Resistance / Mid / Support) that strictly lock onto the high, low, and average of the last 50 hours, regardless of what timeframe you are currently viewing. This is your local playing field. Clean Order Blocks & FVGs: The script dynamically draws institutional zones with an elegant 80% transparency and no borders. They auto-delete to keep your chart clean only when truly invalidated (price breaking completely through an OB or fully filling a gold FVG). Market Structure: Automated BOS (Break of Structure) and CHoCH (Change of Character) lines pinpoint local trend shifts. 3. The Order Flow Trigger (Sniper Execution) Here, we measure real money exchanging hands to time the entry: Whale Volume: Candles paint white when the volume spikes 200% above the 20-period moving average, highlighting Smart Money stepping in. Rolling CVD (Cumulative Volume Delta): Your strongest weapon. Instead of endlessly adding volume history, it uses a rolling 21-bar period with a sharp sensitivity (Fractal = 2). When price makes a new low, but selling pressure is visibly dying out in the CVD, the script prints a Divergence Arrow. This is your early warning system! Your Trading Workflow Summarized: Check the Dashboard/MAs for direction -> Wait for price to tap an SMC Zone or 1H S/R line -> Pull the trigger when CVD Divergence or Whale Volume confirms the reversal.
Pine Script® 인디케이터
socke1986의
3
Pressure Zone Analyzer [JOAT]Pressure Zone Analyzer Introduction The Pressure Zone Analyzer is an advanced open-source support/resistance indicator that combines dynamic pivot-based zone detection, Fibonacci level analysis, institutional level tracking, zone strength scoring, and multi-timeframe analysis into a comprehensive pressure zone intelligence system. This indicator helps traders identify where significant buying and selling pressure exists, where institutional levels act as magnets for price, and which zones have the highest probability of holding. Unlike basic support/resistance indicators that draw static horizontal lines, this analyzer dynamically tracks pressure zones based on pivot points, calculates zone strength using volume, touches, and age, integrates Fibonacci golden zone analysis, monitors institutional weekly/daily levels, and provides real-time position assessment. The indicator is designed for traders who understand that not all support/resistance levels are equal and that zone quality determines trading success. Why This Indicator Exists This indicator addresses the challenge of identifying high-quality support and resistance zones in real-time. Markets respect some levels and ignore others. By systematically analyzing zone characteristics, this indicator reveals: Dynamic Pressure Zones: Identifies support and resistance zones based on pivot points with automatic updates Zone Strength Scoring: Calculates zone quality (0-100%) using volume, touch count, and age Fibonacci Integration: Tracks key Fibonacci levels (23.6%, 38.2%, 50%, 61.8%, 78.6%) and golden zone (50-61.8%) Institutional Levels: Monitors weekly and daily highs/lows that act as institutional reference points Premium/Discount Zones: Identifies institutional buying zones (discount 0-30%) and selling zones (premium 70-100%) Multi-Timeframe Analysis: Tracks higher timeframe levels for additional confluence Position Assessment: Provides real-time analysis of price position relative to all zones Each component provides different zone intelligence. Pivot-based zones show where price reversed, strength scoring shows zone quality, Fibonacci shows mathematical levels, institutional levels show reference points, premium/discount shows institutional bias, and position assessment shows current market context. Together, they create a comprehensive pressure zone system. Core Components Explained 1. Dynamic Pivot-Based Zone Detection Pressure zones are identified using pivot highs and lows: float pivotHigh = ta.pivothigh(high, pivotLength, pivotLength) float pivotLow = ta.pivotlow(low, pivotLength, pivotLength) When a pivot high is detected, a resistance zone is created: if not na(pivotHigh) and barstate.isconfirmed PressureZone newZone = PressureZone.new() newZone.zoneLine := line.new(bar_index - pivotLength, pivotHigh, bar_index + 50, pivotHigh, color=resistanceColor, width=2, extend=extend.right) newZone.price := pivotHigh newZone.startBar := bar_index - pivotLength newZone.zoneType := "resistance" newZone.volumeAtZone := volume Similarly for support zones with pivot lows. Zones are stored in arrays and automatically managed (old zones are removed when maximum count is reached). Zone thickness is calculated as a percentage of price: calcZoneThickness(float price, float thicknessPercent) => float thickness = price * (thicknessPercent / 100) Default thickness is 0.5% of price, creating a zone rather than a single line. This accounts for the fact that support/resistance is a zone, not a precise price level. 2. Zone Strength Scoring System Zone strength is calculated using three weighted components: calcZoneStrength(int touches, float volAtZone, int age, float volWeight, float touchWeight, float ageWeight) => // Volume score (0-1) float avgVolume = ta.sma(volume, 50) float volScore = avgVolume > 0 ? math.min(volAtZone / avgVolume, 3.0) / 3.0 : 0.5 // Touch score (0-1) float touchScore = math.min(touches / 5.0, 1.0) // Age score (0-1) - newer zones score higher float ageScore = math.max(1.0 - (age / 500.0), 0.0) // Weighted combination float strength = (volScore * volWeight) + (touchScore * touchWeight) + (ageScore * ageWeight) Default weights: Volume Weight: 40% - Higher volume at zone formation indicates institutional interest Touch Weight: 30% - More touches indicate stronger zone Age Weight: 30% - Newer zones are more relevant than old zones Strength interpretation: > 70%: Strong zone - high probability of holding 50-70%: Moderate zone - decent probability of holding < 50%: Weak zone - lower probability of holding The indicator tracks touches in real-time: for zone in resistanceZones if inZone(high, zone.price, thickness) zone.touches += 1 zone.volumeAtZone := math.max(zone.volumeAtZone, volume) Each touch increases zone strength, and high-volume touches increase it further. 3. Fibonacci Level Analysis Fibonacci levels are calculated based on recent swing range: calcFibLevels(float high, float low) => float priceRange = high - low float fib236 = low + (priceRange * 0.236) float fib382 = low + (priceRange * 0.382) float fib500 = low + (priceRange * 0.500) float fib618 = low + (priceRange * 0.618) float fib786 = low + (priceRange * 0.786) The indicator focuses on key levels: 50% (0.5): Equilibrium level - often acts as support/resistance 61.8% (0.618): Golden ratio - strongest Fibonacci level Golden Zone is calculated as the area between 50% and 61.8%: calcGoldenZone(float high, float low) => float priceRange = high - low float goldenTop = low + (priceRange * 0.618) float goldenBottom = low + (priceRange * 0.5) The golden zone represents optimal entry area with best risk:reward ratio. Entries in the golden zone allow tight stops below 50% with targets at swing high. 4. Institutional Level Tracking The indicator monitors key institutional reference levels: Weekly High/Low: float lastWeekHigh = request.security(syminfo.tickerid, "W", high , barmerge.gaps_off, barmerge.lookahead_off) float lastWeekLow = request.security(syminfo.tickerid, "W", low , barmerge.gaps_off, barmerge.lookahead_off) Daily High/Low: float yesterdayHigh = request.security(syminfo.tickerid, "D", high , barmerge.gaps_off, barmerge.lookahead_off) float yesterdayLow = request.security(syminfo.tickerid, "D", low , barmerge.gaps_off, barmerge.lookahead_off) These levels act as magnets for price because: Institutional algorithms reference these levels for order placement Retail traders watch these levels for breakouts/breakdowns Options and futures contracts often reference these levels Previous day/week ranges provide context for current price action 5. Premium/Discount Zone System Based on weekly range, the indicator calculates institutional bias zones: float weekRange = lastWeekHigh - lastWeekLow // Premium Zone (70-100% of range) - Institutional selling zone float premiumTop = lastWeekHigh float premiumBot = lastWeekLow + (weekRange * 0.7) // Discount Zone (0-30% of range) - Institutional buying zone float discountTop = lastWeekLow + (weekRange * 0.3) float discountBot = lastWeekLow // Golden Zone (50-61.8% of range) - Optimal entry zone float goldenTop = lastWeekLow + (weekRange * 0.618) float goldenBot = lastWeekLow + (weekRange * 0.5) Trading logic: In Discount Zone: Look for long entries - institutions are likely buying In Premium Zone: Look for short entries - institutions are likely selling In Golden Zone: Optimal risk:reward for entries in direction of trend Between Zones: Neutral area - wait for price to reach discount or premium This concept is based on institutional order flow: institutions buy in discount zones (value area) and sell in premium zones (overvalued area). 6. Multi-Timeframe Level Analysis The indicator tracks higher timeframe levels for additional confluence: float htfHigh = request.security(syminfo.tickerid, htfTimeframe, high , barmerge.gaps_off, barmerge.lookahead_off) float htfLow = request.security(syminfo.tickerid, htfTimeframe, low , barmerge.gaps_off, barmerge.lookahead_off) HTF timeframe is customizable (default: Daily). When current timeframe zones align with HTF levels, confluence increases zone strength. 7. Real-Time Position Assessment The indicator continuously assesses price position: // Check if in golden zone bool inGoldenZone = close >= goldenBottom and close <= goldenTop // Check if near resistance bool nearResistance = false for zone in resistanceZones if inZone(close, zone.price, thickness * 2) nearResistance := true // Check if near support bool nearSupport = false for zone in supportZones if inZone(close, zone.price, thickness * 2) nearSupport := true Position status: AT RESISTANCE: Price near strong resistance zone - consider shorts or exits AT SUPPORT: Price near strong support zone - consider longs or exits GOLDEN ZONE: Price in optimal entry area - look for entries in trend direction NEUTRAL: Price not near any significant zones - wait for better positioning Visual Elements Pressure Zone Lines: Horizontal lines showing resistance (red) and support (green) zones Zone Strength Boxes: Filled boxes showing only strongest zones (strength > 60%) with strength percentage Fibonacci Lines: Key Fibonacci levels (50% and 61.8%) with distinct colors Golden Zone Fill: Shaded area between 50% and 61.8% Fibonacci levels Institutional Lines: Weekly high/low (purple, thick) and Daily high/low (yellow, medium) HTF Lines: Higher timeframe high/low (cyan) for additional confluence Premium/Discount Fills: Shaded zones showing premium (red), discount (green), and golden (orange) areas Position Markers: Visual alerts when price enters golden zone or approaches strong zones Comprehensive Table: Dashboard showing top 2 resistance zones, top 2 support zones, institutional levels, Fibonacci levels, and current position status Input Parameters Pressure Zone Settings: Zone Detection Length: Period for swing range calculation (default: 50, range: 20-200) Pivot Length: Period for pivot detection (default: 10, range: 5-50) Max Zones: Maximum zones to display (default: 8, range: 4-20) Zone Thickness Percent: Zone width as percentage of price (default: 0.5%, range: 0.1-2.0%) Fibonacci Settings: Show Fibonacci Levels: Toggle Fib lines (default: enabled) Show Golden Zone: Toggle golden zone fill (default: enabled) Institutional Levels: Show Last Week High/Low: Toggle weekly levels (default: enabled) Show Yesterday High/Low: Toggle daily levels (default: enabled) Strength Scoring: Show Zone Strength: Toggle strength boxes (default: enabled) Volume Weight: Weight for volume component (default: 0.4, range: 0.0-1.0) Touch Weight: Weight for touch component (default: 0.3, range: 0.0-1.0) Age Weight: Weight for age component (default: 0.3, range: 0.0-1.0) Multi-Timeframe: HTF Timeframe: Higher timeframe for level tracking (default: Daily) Show HTF Levels: Toggle HTF lines (default: enabled) Colors: All colors are fully customizable including resistance, support, Fibonacci, golden zone, HTF levels, and institutional levels. How to Use This Indicator Step 1: Identify Strongest Zones Look at the table to see top 2 resistance and support zones with strength percentages. Focus on zones with strength > 70%. Step 2: Check Institutional Levels Monitor weekly and daily highs/lows. These act as magnets for price and often provide strong support/resistance. Step 3: Assess Premium/Discount Position Determine if price is in premium zone (look for shorts), discount zone (look for longs), or golden zone (optimal entries). Step 4: Look for Fibonacci Confluence When pressure zones align with Fibonacci levels (especially 50% and 61.8%), zone strength increases significantly. Step 5: Monitor Position Status Check the table's position row. "AT RESISTANCE" or "AT SUPPORT" signals potential reversal or bounce areas. Step 6: Wait for Zone Tests Don't chase price. Wait for price to return to strong zones before entering. The best entries occur when price tests a zone and shows rejection. Step 7: Use HTF Confluence When current timeframe zones align with HTF levels, probability of zone holding increases. Look for these high-confluence areas. Best Practices Use on 15-minute to 4-hour timeframes for optimal zone clarity Focus on zones with strength > 70% - these have highest probability of holding Multiple touches increase zone strength - zones that held before are likely to hold again Golden zone entries offer best risk:reward - tight stops with large targets Premium/discount zones work best in trending markets Weekly levels are stronger than daily levels - prioritize weekly when they conflict Wait for price to reach zones - don't anticipate, react Look for volume confirmation when zones are tested - high volume rejections are strongest Combine with price action - zones show where, price action shows when HTF confluence significantly increases zone strength - prioritize these areas Indicator Limitations Zones don't always hold - even strong zones can break during major news or trend changes Zone strength is relative to recent history - not absolute Pivot-based detection requires sufficient price history - may not work on newly listed instruments Maximum zone limits (8 default) mean some valid zones may not be displayed Zone thickness is a percentage - may be too wide or narrow for some instruments Premium/discount zones are relative to weekly range - not absolute value areas Fibonacci levels are based on recent swing - may not align with longer-term structure The indicator shows zones, not direction - requires trader interpretation Works best on liquid instruments with clear support/resistance behavior Zone strength scoring is a guide, not a guarantee - strong zones can still fail Technical Implementation Built with Pine Script v6 using: Custom type definition for PressureZone with strength tracking Array-based storage for resistance and support zones Pivot-based zone detection with confirmation Multi-component zone strength scoring Touch and volume tracking for each zone Fibonacci level calculations Golden zone identification Multi-timeframe security requests for institutional levels Premium/discount zone calculations based on weekly range Real-time position assessment Dynamic table with 13 rows showing all metrics Overlap prevention for visual clarity Automatic zone cleanup when maximum count is reached The code is fully open-source and can be modified to suit individual trading styles and preferences. Originality Statement This indicator is original in its comprehensive pressure zone analysis. While individual components (pivot-based S/R, Fibonacci, institutional levels) are established concepts, this indicator is justified because: It synthesizes five distinct zone analysis methodologies into a unified system Zone strength scoring combines volume, touches, and age with customizable weights Automatic zone management prevents clutter while highlighting strongest zones Integration of Fibonacci golden zone with pivot-based zones Premium/discount zone system based on institutional order flow concepts Multi-timeframe level tracking for confluence analysis Real-time position assessment provides actionable trading context Comprehensive table shows all metrics simultaneously for holistic analysis Overlap prevention ensures clean charts without sacrificing information Each component contributes unique zone intelligence: pivot zones show where price reversed, strength scoring shows zone quality, Fibonacci shows mathematical levels, institutional levels show reference points, premium/discount shows institutional bias, HTF levels show confluence, and position assessment shows current context. The indicator's value lies in presenting these complementary perspectives simultaneously with quantitative strength scoring and intelligent display management. Disclaimer This indicator is provided for educational and informational purposes only. It is not financial advice or a recommendation to buy or sell any financial instrument. Trading involves substantial risk of loss and is not suitable for all investors. Pressure zone analysis is a tool for identifying potential support and resistance areas, not a crystal ball for predicting future price movement. Strong zones, high strength scores, and institutional levels do not guarantee profitable trades. Past zone behavior does not guarantee future zone behavior. Market conditions change, and strategies that worked historically may not work in the future. The zones and levels displayed are mathematical calculations based on current market data, not predictions of future price movement. High-strength zones can break, golden zone entries can fail, and institutional levels can be violated. Users must conduct their own analysis and risk assessment before making trading decisions. Always use proper risk management, including stop losses and position sizing appropriate for your account size and risk tolerance. Never risk more than you can afford to lose. Consider consulting with a qualified financial advisor before making investment decisions. The author is not responsible for any losses incurred from using this indicator. Users assume full responsibility for all trading decisions made using this tool. -Made with passion by officialjackofalltrades
Pine Script® 인디케이터
officialjackofalltrades의
SMT Divergence Strength Index [Metrify]This indicator detects SMT-style divergence between the chart symbol and a user-defined reference symbol, then filters those divergence events using a statistical strength condition. The goal is to separate ordinary pivot mismatches from divergence events that occur during unusually large relative movement between the two instruments. It combines three components in one script: pivot-based divergence detection, Z-score normalization of momentum spread, and a correlation plot for context. The output is an oscillator panel (Z-score columns + correlation line) plus optional SMT labels/lines drawn on the main chart. SMT divergence logic (structural layer) The structural part of the script is based on confirmed pivots on the main symbol. For bearish SMT detection, the script checks whether the main symbol forms a higher high while the reference symbol (evaluated at the same pivot event point) forms a lower high relative to the previous corresponding pivot event. For bullish SMT detection, it checks whether the main symbol forms a lower low while the reference symbol forms a higher low Reference symbol and inversion The Reference Symbol (Pairing) input defines the market used for comparison. The usefulness of the divergence output depends heavily on this pairing. The script assumes the comparison is meaningful enough that non-confirmation between the two symbols can be interpreted as a potential imbalance or relative weakness/strength event. The 'Invert Correlation' option transforms the reference data by using reciprocal values before the divergence and correlation calculations. This can be used when analyzing pairs that are expected to move inversely (like alt to btc in specific event), so the comparison orientation better matches the intended relationship. Invert Correlation mode (what it does and why it exists) The Invert Correlation option changes how the reference symbol is transformed before all downstream calculations (pivot comparison, momentum spread, Z-score, and correlation plot). When enabled, the script does not compare the main symbol to the raw reference prices. Instead, it compares against the reciprocal form of the reference series: reference high is transformed using 1 / low reference low is transformed using 1 / high reference close is transformed using 1 / close This inversion is used so that an inversely related market can be analyzed in the same directional framework as a positively correlated one. In practical terms, it converts an opposite direction relationship into a comparable orientation for SMT logic. After inversion, moves that would normally appear opposite can be interpreted as if they were aligned, allowing the same higher-high / lower-high and lower-low / higher-low SMT structure rules to be applied consistently. Conceptually, invert mode is useful when your reference asset is expected to move opposite to the main asset and you want the script to evaluate non-confirmation in a unified SMT framework. It does not automatically improve signal quality, but simply changes the orientation of the comparison so the divergence logic matches the relationship you are trying to study. Use normal mode when the pair is usually expected to move in the same direction. Use invert mode when the pair is usually expected to move in opposite directions (or when your analysis framework treats one as a risk-off mirror of the other). Good inversion-pair examples (practical) 1) Risk asset vs Dollar Index (DXY) This is one of the cleanest concepts for inversion. BTCUSD vs DXY ETHUSD vs DXY OIL VS DXY NASDAQ (NDX / US100) vs DXY Gold vs DXY (often inverse, but can break regime) When DXY rises, risk assets often weaken. Inverting DXY makes the reference move in the same orientation as the risk asset. 2) Equity index vs VIX Very common inverse relationship idea. SPX / ES / NQ vs VIX BTC (sometimes) vs VIX as a broader risk proxy (less direct, more regime dependent) Why inversion helps: VIX is typically "fear up when equities down". Inverted VIX can be used as a proxy for risk-on alignment. 3) USD-quoted asset vs USD strength proxy If your main symbol is sensitive to USD strength: XAUUSD vs DXY EURUSD vs DXY GBPUSD vs DXY AUDUSD vs DXY These are classic macro pairings where inversion often makes analytical sense. 4) Some commodity currencies vs commodity / dollar drivers (case-by-case) Examples can work, but are more conditional: USDCAD vs Oil (WTI) (often inverse-ish relationship via CAD/oil linkage) AUDUSD vs Copper (sometimes) NZDUSD vs risk proxy These are not as stable as DXY/VIX examples, so you need to monitor correlation more carefully. Trigger conditions in plain terms A bearish SMT label appears only when all required conditions are satisfied: a confirmed pivot high exists on the main symbol, the current main pivot high is higher than the previous main pivot high, the aligned reference high at the same pivot event is lower than its previous aligned reference high, and the Z-score condition exceeds the configured threshold. A bullish SMT label follows the mirrored condition/vice versa. Display behavior and non-repaint option The indicator uses confirmed pivots, so signals are known only after pivot confirmation. The Non repaint mode setting controls how labels are displayed: Enabled: labels are shown on the trigger/confirmation bar (the bar where the pivot is confirmed and the signal becomes true). Disabled: labels are shifted back to the pivot bar for visual alignment. This setting affects visualization only. It does not change the underlying pivot confirmation process. This indicator marks pivot-based intermarket non-confirmation events that occur during statistically elevated relative dislocation. Pair selection remains a major source of variation in output quality. Weakly related pairs can produce divergence labels that satisfy the script’s rules but are not analytically useful.
Pine Script® 인디케이터
Metrify의
Fibonacci Confluence Grids (Levels + Time Zones) [Metrify]This script is built around a simple but often-misused idea: Fibonacci levels are only useful when the reference swing is meaningful. In practice, most traders do not fail because they “used the wrong ratio,” but because they anchored the Fib to a weak or inconsistent swing. A 0.618 level drawn from noise is still noise. The core design of this indicator is therefore not “draw more levels” but to formalize three simple steps that we usually do inconsistently by eye: identify an A→B swing, filter that swing for significance, and project both price levels and timing windows from that swing. Once a valid swing is accepted, the script projects a configurable set of price Fibonacci levels (retracements and/or extensions) and a separate configurable sequence of time gates (bar offsets projected forward from point B). The price levels define a vertical map of potential reaction zones. The time gates define a horizontal map of potential timing windows. Used together, they create a 2D framework: not only where price may become sensitive, but also when the probability of a market event tends to increase. Time gates: temporal structure and why “events cluster” around them The time gate projects vertical markers forward from point B using a bar sequence (commonly Fibonacci-like). The key idea is not random, but practical timing structure. Markets often exhibit rhythm: impulsive legs, pullbacks, consolidations, and expansions frequently have characteristic durations. Time gates should be interpreted as attention windows: periods where you should expect the probability of a notable market event to be higher than usual. “Event” here is intentionally broad, because direction is not guaranteed: acceleration / continuation burst pullback completion and resumption attempt volatility expansion after compression reversal attempt (successful or failed) fakeout / stop run / liquidity sweep structural break and regime shift This is why it’s accurate to say that significant events often occur around time gates. Not because the gate forces a reversal, but because it’s a timing checkpoint where participation and auction dynamics frequently change. Your edge comes from combining the gate with context: price location near a major Fib level, session behavior, and confirmation from price action/structure. How to use it as a manual framework A strong discretionary workflow is to treat this as a 2D confluence map: price zone × time window. Start by asking: “Is the active A→B swing meaningful?” If it looks like chop, tighten filters (increase Min Size / Min Bars, or increase ZigZag reversal / pivot length). Once the swing quality is good, treat the map as a set of planned observation points. When price approaches a major retracement (0.5/0.618/0.786) or extension (1.272/1.618), check whether a time gate is also nearby. If yes, you should expect higher information density so you watch for confirmation rather than forcing prediction. Confirmation can be whatever your style uses: structure break, reclaim, rejection candle quality, volatility expansion, etc. If price is mid-range (far from major fibs) and far from gates, that’s often low-quality territory for forcing trades —> your standards should be higher, not lower.
Pine Script® 인디케이터
Metrify의
1
Failed 2 Evaluator v2.2-Failed 2 Evaluator & Continuation EngineDescription: The Failed 2 Evaluator & Continuation Engine is an objective price-action analysis tool designed to categorize, visualize, and statistically track how Failed 2 candles behave when interacting with key market levels. This indicator evaluates whether a breach of a level results in price expansion, choppy price action, or a strict structural failure (a "Failed 2" in Strat terminology), providing traders with a quantitative view of historical follow-through. How It Is Calculated The script operates in three distinct phases: 1. Level Generation & Trigger The indicator establishes boundaries using either auto-calculated Pivot Highs/Lows (with user-defined left/right lengths) or manually inputted price levels. The evaluation sequence is triggered the moment a candle's total range (wick) physically breaches one of these active levels. 2. Strict Outcome Evaluation (On Close) Once the triggering candle closes, the script strictly categorizes the outcome into one of three buckets: Breakout/Breakdown Expansion: The candle successfully closes outside the breached level, indicating a continuation of the break. Strict Failed 2 (F2U / F2D): The candle breaches the level but immediately reverses, failing to hold the extreme. To qualify as a true Failed 2, the script enforces a strict structural rule: the candle must close back inside the level and must be a directional reversal candle (e.g., an F2U requires the close to be below the level and below its own open). Neutral Reclaim (Chop): The candle breaches the level and falls back inside, but fails the strict color/directional logic of a true Failed 2. 3. The Continuation Engine When a strict Failed 2 is confirmed, the script activates a forward-looking continuation tracker. It records the closing price of the Failed 2 candle and waits a user-defined number of bars (e.g., 3 bars). It then checks if the price at that future bar successfully continued in the direction of the reversal, logging the historical frequency of structural follow-through. Dashboard Features & Chart Visuals Real-Time Watcher: A dynamic table row alerts the user when a live, unconfirmed candle is actively testing a level, prompting observation for either a Continuation or a Failed 2. Historical Distribution: The dashboard calculates the exact percentage breakdown of Expansions, True Failed 2s, and Chop over a user-defined lookback window. Chart Markers: Clean, unobtrusive visual tags pinpoint exactly where Breaks (B↑/B↓) and True Reversals (F2U/F2D) occurred on the chart for easy visual backtesting. Analytical Purpose The primary benefit of this tool is the removal of emotional bias and subjectivity from "false breakout" analysis. By rigidly defining what constitutes a failed move and statistically tracking its historical continuation rate, this indicator allows analysts to quantify an asset's unique behavior at range extremes. It transforms abstract price action theories into measurable, observable data.
Pine Script® 인디케이터
hardwaybets의
POC Sweep Reclaim [LuxAlgo]The POC Sweep Reclaim (PSR) model identifies a two-step "rejection then acceptance" price action pattern centered around the Point of Control (POC) of previous candles. By approximating volume-at-price data using lower timeframe (LTF) granularity, the tool highlights specific liquidity traps where price first fails to sustain a move beyond a high-volume level and subsequently reclaims it. The PSR framework is built on the logic that a "Sweep" represents a failed probe of value, while the "Reclaim" represents a successful breach, signaling a potential shift in market dominance as price moves away from trapped participants. 🔶 USAGE The indicator visualizes market microstructure dynamics through a sequence of two distinct events: 🔹 The Sweep (The Rejection) A sweep occurs when a candle's wick trades through the previous bar's POC, but the candle body fails to close beyond it. This identifies a "Liquidity Grab" where price interacts with a high-volume node but fails to find acceptance, often trapping breakout traders. Buyside Sweep: Price wicks above the previous POC but closes below it (Bearish Rejection). Sellside Sweep: Price wicks below the previous POC but closes above it (Bullish Rejection). 🔹 The Reclaim (The Acceptance) A reclaim occurs when the candle immediately following a sweep successfully closes beyond the same POC level that was just rejected. BSR (Buyside Reclaim): A bullish signal where price closes above a previously swept upper POC, suggesting the trap is resolved to the upside. SSR (Sellside Reclaim): A bearish signal where price closes below a previously swept lower POC, suggesting follow-through to the downside. 🔶 DETAILS The script aims to bridge the gap between standard OHLCV analysis and order-flow dynamics. While a true footprint engine (available on higher TradingView tiers) is more accurate, this script uses a proxy by aggregating volume from a lower timeframe (e.g., 1-minute) to estimate the POC of higher-timeframe bars. 🔹 Academic Intuition Order-Flow Imbalance (OFI): Short-term price changes are strongly linked to the inability of one side to provide enough depth. A "reclaim" reflects a shift where the dominant side successfully absorbs the liquidity that caused the initial rejection. Salient Prices: High-volume nodes like the POC act as psychological and mechanical barriers. Research indicates that liquidity clusters around these prominent prices, making them significant areas for support/resistance. Stop-Loss Cascades: Sweeps often interact with clustered stop-loss orders. If price reclaims the level after clearing these stops, it can trigger a directional move as the market "clears" the liquidity hurdle. 🔹 Practical Limitations Footprint Proxy: The POC is calculated by aggregating volume at the close of LTF bars. This is a noisy proxy compared to a true footprint, which tracks every tick. Data Snooping: Like all pattern-based indicators, the "Reclaim" logic should be verified with robust backtesting to ensure signals are not the result of random price noise. Repainting: Because the POC depends on LTF data, the values for the current developing bar may fluctuate until the candle closes. 🔶 SETTINGS Lower Timeframe for POC: Sets the granularity for volume aggregation. A lower value (like 1m) provides a more precise POC proxy. Show POC: Toggles the visibility of the calculated Point of Control dots for every bar. Show Sweep Dots: Displays markers at the POC level when a wick interaction occurs without a body close. Show BSR (Buyside Reclaim): Highlights candles that successfully close above a swept buyside POC. Show SSR (Sellside Reclaim): Highlights candles that successfully close below a swept sellside POC.
Pine Script® 인디케이터
LuxAlgo의