지금 시작

피봇 포인트와 레벨

Smart Pivot Trend█ OVERVIEW Smart Pivot Trend is a market structure–based trend indicator that combines swing pivots, volatility adaptation (ATR), and dynamic range levels to determine which side of the market is in control — buyers or sellers. Instead of moving averages, trend direction is defined through structural breaks inside pivot ranges. The indicator visualizes the active trend, evolving market structure, and historical support/resistance levels created at moments of control shifts. It helps identify trend transitions, structure breaks, and areas where price has an increased probability of reaction. █ CONCEPT Built around adaptive swing structure. The core idea is that trend emerges from market structure, not from price relative to an average. - Swing highs and swing lows form the current structural range. - Two internal percentage-based levels inside this range act as decision zones. - Break above the upper level → bullish control. - Break below the lower level → bearish control. To prevent structure from becoming outdated during strong moves, pivots are dynamically adjusted when price deviates beyond ATR × multiplier. This mechanism makes the structure volatility-aware rather than static. As a result, the indicator combines: - a dynamic, living market structure (active pivot trend) - static “market memory” levels marking previous control shifts █ FEATURES Calculations - Swing pivots as the foundation of market structure - Internal range levels as structural decision zones - ATR-based adaptive pivot correction (volatility-aware structure) - Smooth Factor — controls the degree of structural correction relative to price; defines how fast pivots adapt during strong moves - Trend change detection through structural range breaks Visualization - Active trend line based on current structure - Historical support/resistance levels plotted at trend flips - Triangles marking breaks of those levels - Gradient fill between price and the active trend line - Trend-based coloring (green = bullish, red = bearish) - Optional candle coloring based on current structural trend (bullish / bearish control) Signals - BUY / SELL — on structural trend changes - Bullish Break / Bearish Break — when historical levels are broken - Impulse breaks (when candles break levels with strong momentum) Alerts - Trend change to bullish - Trend change to bearish - Resistance break - Support break █ HOW TO USE Main settings: - Swing Length — sensitivity of swing detection - Lower / Upper Level — internal structural decision levels - ATR Length / Multiplier — influence of volatility on pivot adaptation - Smooth Factor — speed of structural adjustment to price - Visual options — colors, hiding lines, deleting broken levels, color candles by trend Trend logic: - Price above active pivot low → bullish structure - Price below active pivot high → bearish structure █ APPLICATION Trend-following - The indicator can act as a directional filter for signals from other tools. - Entries are taken only when signals from external indicators (e.g., RSI, MACD, momentum tools, price action setups, breakout systems) align with the current Smart Pivot Trend direction. - Highest probability occurs when entries happen during pullbacks to the active trend line in the direction of the prevailing structure. Market structure shifts - A trend flip represents a transfer of control between buyers and sellers. - These moments often precede larger moves because the swing structure changes. Breakout trading - Historical levels mark areas where control previously changed. - Their break often leads to volatility expansion and impulsive movement. Pullback trading - The active trend line acts as dynamic support/resistance. - Pullbacks to this line in strong trends often provide favorable risk-to-reward setups. █ ADAPTATION TO TRADING STYLE The Swing Length and Smooth Factor parameters allow the indicator to be tailored to different trading styles: Shorter Swing Length + higher Smooth Factor - structure reacts faster - more frequent trend shifts - suitable for scalping and intraday trading Longer Swing Length + lower Smooth Factor - slower structural changes - filters minor fluctuations - better suited for swing trading and longer-term positions This allows the indicator to function both as a fast micro-structure engine and as a stable higher-level trend filter. █ NOTES - This is a structural analysis tool, not a standalone trading system - Best results come when combined with key S/R levels, higher timeframe context, and price action - In ranging markets, trend flips may occur more frequently — a natural behavior of structure-based systems
Pine Script® 인디케이터
Uncle_the_shooter의
RLP V4.3 -Long Term Support/Resistance Levels (Refuges-Shelters)// Introduction // We have utilized the Zigzag library technology from ©Trendoscope Pty Ltd for Zigzag generation, allowing users the freedom to choose which of the different Zigzags calculated by Trendoscope as "Levels and Sub-Levels" is most suitable for generating ideal phases for evaluation and selection as "most preponderant phases" over long-term periods of any asset, according to its particular behavior based on its age, volatility, and price trend. // Theoretical Foundation of the Indicator // Many traditional institutional investors use the latest higher-degree market phase that stands out from others (longest duration and greatest price change on daily timeframe) to base a Fibonacci retracement on whose levels they open long-term positions. These positions can remain open to be activated in the future even years in advance. The phase is considered valid until a new, more preponderant phase develops over time, at which point the same strategy is repeated. // Indicator Objectives // 1) Automatically find the latest most preponderant long-term phase of an asset, analyzing it on daily timeframe while considering whether the long-term market trend is bullish or bearish. 2) Draw a Fibonacci Retracement over the preponderant phase (reversed if the phase is bullish). 3) The indicator automatically numbers and locates the 3 most preponderant phases, selecting Top-1 for initial Fibo drawing. 4) If the user disagrees with the indicator's automatic selection, they have the freedom to choose any of the other 2 Top phases for the Fibo drawing and its levels. 5) If the user disagrees with the amplitude or frequency of the initially drawn Zigzag phases, they can modify the Zigzag calculation algorithm parameters until one of the Top-3 matches the phase they had in mind. 6) As an experimental bonus, the indicator runs a popularity contest (CP) of "bullseye" daily price (OHLC) matches, subject to user-defined tolerance ranges, against all Fibo levels of the Top 3 selected phases, to verify which phase the market prices are validating as the most popular for placing trades. Contest results are displayed in the POP. CONTEST column of the Top-3 phases table. If the contest detects a change in the winning phase, a switch can be enabled to activate an alert that the user can utilize with TradingView's alert creator to display an alarm, send an email, etc. 7) This indicator was designed for users to find the preponderant long-term phase of their assets and manually record the date-price coordinates of the i0-i1 anchors of the preponderant phase. The Top-1 phase coordinates are shown in the Top-3 phases table where they can be captured. The date-price coordinates of all HH and LL pivots, from all Zigzag phases, can be displayed via a switch. With the pivots, the user can select a different phase than those automatically found by the indicator, according to the conclusions of their own research. Subsequently, the user can forget about this RLP indicator for a while and move on to apply in their normal trading our RLPS indicator (Simplified Long-Term Shelters), in which they can draw and simultaneously track the long-term shelters of up to 5 different assets, simply by entering their corresponding date-price coordinates, previously located with this RLP indicator or through their own observation. // Additional Notes // 1) As of the this V4.3 publication date (01/2026), the Zigzag generation parameters were adjusted by default to find the long-term preponderant phases for the following assets: Bitcoin, Ethereum, Bitcoin futures BTC1! (all generated due to the 2020-2021 pandemic). It also provides by default the confirmed preponderant phases for the following assets: Apple, Google, Amazon, Microsoft, PayPal, NQ1!, ES1! and SP500 Cash. 2) Prices, phases, and levels shown on the graphic chart correspond to results obtained using daily Bitcoin data from the Bitstamp exchange, BTCUSD:BITSTAMP (popular here in Europe). 3) Any error corrections or improvements that can be made to the phase selection algorithms or the CP phase popularity contest algorithm will be highly appreciated (statistics and mathematics, among many other sciences, are not particularly our strong suit). 4) We sincerely regret to inform you that we have not included the Spanish translation previously provided, due to our significant concern regarding the ambiguous rules on publication bans related to indicators. 4) Sharing motivates. Happy hunting in this great jungle!
Pine Script® 인디케이터
Masewal_aj_p_oolom의
[Saga Trading] Liquidation Leverages ProThis indicator is designed to provide context on leverage-related market risk, not trading signals. Its purpose is to help traders visualize price areas where leveraged positions become vulnerable due to increased exposure, rather than to predict forced events. By mapping zones where leverage sensitivity increases, the script highlights areas of potential instability, where price reactions may accelerate due to risk management constraints, margin pressure, or position adjustment. These zones do not imply direction and should not be interpreted as targets. Instead, they offer risk awareness, helping traders assess where market movement may become less stable or more reactive. This tool is intended as a contextual risk-mapping indicator, allowing traders to better evaluate exposure when price approaches leverage-sensitive areas. It does not provide buy or sell signals and should be used in conjunction with price action and market structure analysis.
Pine Script® 인디케이터
KevSagaT의
Key Levels - Prop Trader JourneyKey Levels – Prop Trader Journey (Intraday Levels + Clean Right-Side Layout) This indicator plots session-based reference levels commonly used for intraday futures/stocks, with a focus on clean chart layout and label collision handling. What it plots (toggle each on/off) Today’s RTH High/Low (TDH/TDL) Opening Range High/Low (ORH/ORL) based on the first N minutes after RTH open Pre-Market High/Low (PMH/PML) based on the premarket session window First Hour High/Low (1HH/1HL) based on the first N minutes after RTH open Yesterday’s RTH High/Low (YDH/YDL) captured at the next RTH open RTH Open price RTH Average line (AVG) using a selectable source (HL2 / HLC3 / OHLC4 / HLCC4) This Week / Last Week levels (O/H/L/C + Avg) from the weekly timeframe Optional Session Open level at a configurable time (default 18:00 NY) 2 Custom price levels (optional extend-left) How levels are calculated (high level) The script detects whether the current bar is inside RTH / Pre-Market / Opening Range / First Hour using your chosen time zone and session templates. High/Low levels update in real time while inside each session window. Premarket levels are cached so they remain visible after premarket ends. Weekly levels are pulled from the weekly timeframe to provide higher-timeframe context. Display modes Compact mode: levels are drawn in a compact “right-side” layout using a configurable right offset and line length. Pivot mode: levels originate from the bar where the level was established/updated and extend toward the right. Label collision handling (the “unique” part) When multiple levels are close together, labels can overlap. This script supports: Merge: combine nearby levels into one label within a tick threshold Stack: show separate labels stacked vertically Merge + Stack (4+): merge normally, but stack when there are many levels This helps visualize confluence/stacked zones without clutter. Customization Every level has its own color / line style / width controls. Labels have adjustable text/bg/size, and custom levels can extend left by a user-defined number of bars. How to use with you trade Use these levels as reaction areas (support/resistance, rejection, breakout/retest). When labels “stack” or multiple names appear merged at similar prices, that signals confluence—often a more important zone than a single level.
Pine Script® 인디케이터
oattonline의
Setup Finder by cryptokazancevEnglish The indicator helps find setups based on Smart Money instruments What OB and FVG Are Order Blocks (OB) are a bullish or bearish candle (or several candles) where the next candle (or a sequence of candles) impulsively engulfs the order block. Imbalance (FVG) is a price inefficiency caused by an impulsive price move due to an abnormal dominance of supply or demand at a price level. Indicator Settings (in Simple Terms) Show OB — enable/disable displaying the detected order blocks on the chart. Show FVG — enable/disable displaying the detected FVG zones. Max OB (per side) — how many long and how many short order blocks to display at the same time. Max FVG (per side) — how many long and how many short FVG zones to display at the same time. Engulfing Window (candles) — how many subsequent candles are allowed to consider the order block “engulfed.” Color Engulfing Candles — highlight candles where the engulfing occurred to make it easier to spot on history. OB Invalidation Mode — when to consider an order block “broken” (invalid): “50%” — the OB is considered invalid if price closes with the candle body below/above the midpoint (50%) of the order block. “Entry Drill” — the OB becomes invalid on the first touch of the OB zone. Size Limits via ATR OB Size in ATR — here ATR is defined as the average candle size over the last 500 bars. It is used to determine the maximum allowed size of an order block. FVG Size in ATR — the same, but for an FVG zone: a limit on what FVG size is considered acceptable. Setup Search Mode Enable Setup Search Mode — when enabled, the indicator will not display all OB and FVG, but only those that contain: pivots, or a Sunday Open level, or both. Require Pivots / Require Sunday Open — a requirement that the OB/FVG zone must contain pivots and/or Sunday Open levels (depending on the selected option). Number of Sunday Open Levels — how many Sunday Open levels to draw on the chart. How to use Enable Setup Search Mode . Turn on the requirements Require Pivots and Require Sunday Open so that only the most relevant OB/FVG zones are displayed. Wait for price to return into the highlighted Order Block or FVG area. On a lower timeframe, look for an entry model/confirmation, such as: engulfing, pin bar, break of structure / Market Structure Shift (MSS). Repainting The indicator does not repaint. Русский Индикатор помогает находить сетапы по торговой стратегии Павла Казанцева. Что такое OB и FVG Ордерблоки (OB) — это бычья или медвежья свеча (или несколько свеч), при этом следующая свеча (или связка свеч) импульсно поглощает ордерблок. Имбаланс (FVG) — это ценовая неэффективность, вызванная импульсным движением цены вследствие аномального превосходства спроса/предложения на ценовом уровне. Настройки индикатора (простыми словами) Показывать OB — включить/выключить отображение найденных ордерблоков на графике. Показывать FVG — включить/выключить отображение найденных зон FVG. Максимум OB (на сторону) — сколько лонговых и сколько шортовых ордерблоков показывать одновременно. Максимум FVG (на сторону) — сколько лонговых и сколько шортовых зон FVG показывать одновременно. Окно поглощения (свечей) — сколько следующих свечей допускается, чтобы считать, что ордерблок был “поглощён”. Окрашивать поглощённые свечи — подсвечивать свечи, где произошло поглощение, чтобы проще было искать это на истории. Режим инвалидации OB — когда считать ордерблок “сломавшимся” (недействительным): “50%” — OB считается недействительным, если цена закрепилась телом свечи ниже/выше середины (50%) ордерблока. “Entry Drill” — OB становится недействительным при первом касании зоны OB. Ограничение размеров через ATR Размер OB в ATR — ATR здесь понимается как средний размер свечей за последние 500 баров. От него считается, какой максимальный размер ордерблока допустим. Размер FVG в ATR — то же самое, но для зоны FVG: ограничение, какой размер FVG считается допустимым. Режим поиска сетапов Включить режим поиска сетапов — если включить, индикатор будет показывать не все OB и FVG, а только те, внутри которых есть: пивоты, или уровень Sunday Open, или и то, и другое. Обязательно Пивоты / Обязательно Sunday Open — требование, чтобы в зоне OB/FVG обязательно были пивоты и/или уровни Sunday Open (в зависимости от выбранной опции). Количество уровней Sunday Open — сколько уровней Sunday Open рисовать на графике. Как пользоваться Включите режим поиска сетапов . Активируйте требования Обязательно Пивоты и Обязательно Sunday Open , чтобы отображались только наиболее релевантные зоны OB/FVG. Дождитесь, когда цена вернётся в отмеченный диапазон ордерблока или FVG . На младшем таймфрейме найдите модель входа/подтверждение, например: поглощение, пинбар, слом структуры / Market Structure Shift (MSS). Перерисовка Индикатор ничего не перерисовывает.
Pine Script® 인디케이터
cryptokazancev의
Last Year's Close [fmb]This tool plots last year’s closing price as a clean stepline on the daily chart and turns it into a simple regime map. Each year is coloured by its own performance and the line flips in real time as price trades above or below that level. - Plots last year’s close for each bar of the current year as a horizontal step line - Works strictly on the 1D timeframe (the script will warn you otherwise) - Year classification: if December closes above January’s open, that year is bullish; if it closes below, that year is bearish - Horizontal and closing vertical segments are coloured green for bullish years and red for bearish years - Inside the active year the colour updates dynamically: green while price is above last year’s close, red while price trades below it - User inputs for bullish and bearish colours (default: soft green/red with 30 % opacity), so it can blend into any chart theme - Uses the symbol’s own price scale, so the line always moves and scales together with the candles Alert (New Feature) The script includes a built-in alert condition that fires when price comes within a user-defined percentage of last year’s close. Add the indicator to your chart (on 1D). In Inputs, set the proximity percentage you want (default 10 %). Create an alert on this script and choose: - Condition: Price near last year's close - Your preferred expiry and notification settings. Use it to quickly see when a market is reclaiming or losing last year’s closing level, to anchor yearly mean-reversion trades, or to sanity-check how far a move has stretched relative to where the last calendar year finished.
Pine Script® 인디케이터
Fullymobile의
Ultimate Overnight Trading Range + Levels (day, week, month) Define your Ultimate Overnight Trading Range: ~ Overnight Range Features ~ Three modes: 1. Default Mode (18:00 EST to 9:30 EST Open): - Tracks the high and low from 18:00 EST until 9:30 EST market open - Uses 5-minute candle data for precise boundary detection 2. Custom Time Range: - Define your own start and end times - Select from 14 major time zones 3. Custom Candle Selection: - Select specific candles from 4-hour, 1-hour, or 30-minute timeframes - Choose which candles define your overnight range - example: 22:00 and 2:00 EST 4-hr candle - Use High/Low or Open/Close as your price source ~ Previous Period Levels ~ Automatically plots Open, Close, High, and Low from: Previous Month Previous Week Previous Day Toggle on/off whatever you want of course. Extend lines left and right etc. Alerts: You can set alerts on any of the plotted levels: Click on the indicator settings and select "Add Alert on..." Configuring Overnight Range Mode 1: Default (22:00 EST to Open) - Simply select this mode—no additional configuration needed. The indicator will automatically track the overnight session from 22:00 EST until 9:30 EST. Mode 2: Custom Time Range - Select "Custom Time Range" from the Mode dropdown - Choose your timezone from the list - Set your desired Start Hour and Start Minute - Set your desired End Hour and End Minute Mode 3: Custom Candle Selection - Select specific candles from 4-hour, 1-hour, or 30-minute timeframes - Choose which candles define your overnight range - example: 22:00 and 2:00 EST 4-hr candle - Use High/Low or Open/Close as your price source Please let me know if any corrections or changes are needed. Thanks! :)
Pine Script® 인디케이터
Stokrotka의
RSI 1H/4H Multi-Level (REPAINT) - Hourly LimitRSI 1H/4H Multi-Level (REPAINT) – Hourly Limit is a Pine Script v5 indicator designed to monitor RSI level crossings on two higher timeframes (1H and 4H) while controlling alert frequency to avoid spam. The script can display visual dots on the chart and trigger a single consolidated alert message when either timeframe’s RSI crosses user-defined levels—limited to once per hour. Key features 1) Dual timeframe RSI monitoring (1H + 4H) Calculates RSI on 1-hour (60) and 4-hour (240) timeframes independently. Each timeframe has its own configurable settings: RSI Length Lower level (commonly oversold, e.g., 30) Upper level (commonly overbought, e.g., 70) Dot color for chart marking 2) Multi-level cross detection The indicator tracks when RSI crosses either boundary level: 1H RSI crosses its Lower or Upper level 4H RSI crosses its Lower or Upper level A trigger occurs if any of these crossings happens. 3) Hourly alert limiter (anti-spam) To prevent repeated alerts, the script includes an hourly cooldown: It stores the start time of the last hour when an alert was fired. A new alert can only fire when the current hour start time is greater than the last recorded one. Result: maximum 1 alert per hour, even if multiple crossings occur within the same hour. 4) Consolidated alert message When triggered, the script builds a single message that can include: 1H RSI value if the 1H crossing occurred 4H RSI value if the 4H crossing occurred Example message format: 1H RSI (52.34) crossed level; 4H RSI (48.10) crossed level; 5) On-chart visualization with priority coloring If enabled, the script plots a dot below the bar on trigger: White dot if both 1H and 4H signals fired in the same hour 1H color if only 1H fired 4H color if only 4H fired Important note: REPAINT behavior This indicator intentionally uses request.security(..., lookahead=barmerge.lookahead_on), meaning it can repaint because it references higher-timeframe data with lookahead enabled. As a result: Cross signals may appear earlier than they would in a non-repainting implementation. Signals can change as the higher timeframe candle evolves. Typical use cases Monitoring overbought/oversold zone transitions on higher timeframes while trading lower timeframes. Receiving fewer, cleaner alerts thanks to the hourly limit. Quickly identifying whether a signal came from 1H, 4H, or both using dot colors.
Pine Script® 인디케이터
inozemtsev999의
Today's Price Position On Intraday-From Low /High OVERVIEW A clean, professional indicator that displays your stock's current position relative to today's high, today's low, and yesterday's close - all in one convenient table. 🎯 WHAT IT SHOWS Three key metrics in real-time: - From Low: How far price has moved from today's lowest point - From High: How far price is from today's highest point - % Today: Today's percentage change vs yesterday's 4 PM close ✨ KEY FEATURES ✓ Real-time percentage tracking throughout the trading day ✓ Works on ALL intraday timeframes (1min, 5min, 15min, etc.) ✓ Includes Pre-Market (4:00-9:30 AM) and Regular Trading Hours (9:30-4:00 PM) ✓ Color-coded indicators: Green (up), Red (down), Yellow (at reference point) ✓ Clean, non-intrusive table display in bottom-right corner ✓ Accurate reference to previous day's actual closing price 🔧 TESTING MODE Built-in testing mode allows you to: - Manually input test values for High, Low, Close, and Previous Close - Verify calculations and behavior before live trading 📈 IDEAL FOR - Day traders monitoring intraday price action - Swing traders tracking daily momentum - Anyone wanting quick visual reference of price position - Traders who need to know "where we are" at a glance 💡 HOW TO USE Simply add to your chart - no configuration needed! The indicator automatically: 1. Tracks today's high and low (including pre-market) 2. References yesterday's 4 PM closing price 3. Calculates your current position as percentages 4. Updates in real-time with color-coded signals 🎨 COLOR LEGEND - Green: Price is up/above reference - Red: Price is down/below reference - Yellow: Price is exactly at reference point (unchanged) - Orange: Previous day's close reference price ⚙️ TECHNICAL NOTES - Automatically resets at start of each trading day - Handles both pre-market and regular hours seamlessly - Uses confirmed previous day close (no repainting) - Lightweight and efficient - won't slow down your charts Perfect for traders who want professional-grade information without chart clutter!
Pine Script® 인디케이터
jhor_10의
RSI 1H/4H Multi-Level (REPAINT) - Hourly LimitWhat the script does 1) Indicator setup Creates an overlay indicator named “RSI 1H/4H Multi-Level (REPAINT) - Hourly Limit” (overlay=true), so markers appear on the main price chart. 2) Inputs (user settings) 1 Hour Settings len1h: RSI length for 1H (default 12) lowL1h: lower threshold (default 30) highL1h: upper threshold (default 70) color1h: dot color for 1H-only triggers (default blue) 4 Hour Settings len4h: RSI length for 4H (default 12) lowL4h: lower threshold (default 30) highL4h: upper threshold (default 70) color4h: dot color for 4H-only triggers (default orange) Visuals showDots: toggle to show/hide dots on the chart 3) RSI calculation from higher timeframes (repainting) Function: rsi_htf(tf, length) uses request.security() to compute RSI from a higher timeframe: gaps_off merges gaps smoothly lookahead_on allows future higher-timeframe values to appear on earlier bars → repainting behavior It calculates: rsi1h = 1H RSI rsi4h = 4H RSI 4) Alert frequency control (once per hour) lastAlertHour stores the timestamp of the last alerted hourly candle start. currentHourStart = time("60") gets the start time of the current 1-hour candle. canAlert = currentHourStart > lastAlertHour ensures the script can only trigger once per new hour. 5) Cross conditions Uses ta.cross() to detect RSI crossing either level (in either direction): c1L: 1H RSI crosses the 1H lower level c1H: 1H RSI crosses the 1H upper level c4L: 4H RSI crosses the 4H lower level c4H: 4H RSI crosses the 4H upper level Then: fire1h is true if either 1H cross happens fire4h is true if either 4H cross happens trigger is true if (1H or 4H cross) AND canAlert is true 6) Alert message and timer update When trigger is true: Updates lastAlertHour to the current hour start (blocks further alerts that hour) Builds an English message indicating which timeframe(s) crossed and includes RSI values Sends an alert with alert.freq_once_per_bar_close (one per bar close) 7) Chart visualization (dots) Chooses dot color: white if both 1H and 4H crossed within the allowed hour color1h if only 1H crossed color4h if only 4H crossed Plots a small circle below the bar when showDots and trigger are true.
Pine Script® 인디케이터
inozemtsev999의
Bulltrapp.com - KEY LEVELSBulltrapp.com - KEY LEVELS A comprehensive all-in-one key levels indicator designed for serious traders who want to see the most important price levels at a glance. 📊 Features: Daily Levels Previous Day High/Low (PDH/PDL) Daily Open (DO) Weekly Levels Current & Previous Week High/Low Weekly Open (WO) Monday Range Monday High/Low - essential for weekly range analysis Monthly Levels Current & Previous Month High/Low Monthly Open (MO) Quarterly & Yearly Levels Quarterly Open (QO) Yearly High/Low/Open with Previous Year levels Session Levels Asian, London & New York session High/Low Customizable session times (UTC based) Opening Range NY Opening Range (first 15 min) London Opening Range (first 15 min) Automatic Support/Resistance Detection Pivot-based S/R detection with customizable lookback Shows levels with the most touches (strongest zones) Automatic merging of nearby levels to reduce clutter Configurable sensitivity and history length ⚙️ Customization: Fully customizable colors for each level type Adjustable line width and style (Solid/Dashed/Dotted) Label size options Toggle each level group on/off independently Works correctly with Heikin Ashi charts (uses real OHLC data) 📱 Built by Bulltrapp.com This indicator is brought to you by Bulltrapp.com - your ultimate crypto portfolio tracker! 🚀 Track your entire portfolio across multiple exchanges and wallets in one place 📈 Real-time P&L tracking with detailed analytics 💰 Tax reporting made easy 🔔 Smart alerts for price movements and portfolio changes Visit bulltrapp.com to take your trading to the next level! If you find this indicator useful, please give it a ⭐ and leave a comment!
Pine Script® 인디케이터
Bulltrapp_com의
PSP with Color ThemesEnglish Description The PSP with Color Themes indicator is a sophisticated tool for detecting price swing divergences between the current trading instrument and a selected reference asset. This indicator implements PSP (Price Swing Divergence) logic to identify moments when price movements between two correlated assets diverge from their typical relationship. Traders can select from multiple professionally designed color themes or customize their own color scheme, with adjustable opacity for optimal chart visibility. The core functionality compares candlestick patterns between the current chart and the reference symbol, highlighting bullish signals when the current asset rises while the reference falls (or vice versa in inverse mode). This divergence detection helps identify potential momentum shifts and trading opportunities before they become apparent in single-asset analysis. The indicator offers flexible configuration including inverse correlation mode for negatively correlated pairs and a clean visual presentation that doesn't clutter the price chart while providing immediate visual cues through colored candlesticks. Русское описание Индикатор PSP с цветовыми темами представляет собой продвинутый инструмент для обнаружения дивергенций колебаний цены между текущим торговым инструментом и выбранным эталонным активом. Этот индикатор реализует логику PSP (Price Swing Divergence) для выявления моментов, когда движения цен между двумя коррелирующими активами отклоняются от их типичной взаимосвязи. Трейдеры могут выбирать из нескольких профессионально разработанных цветовых тем или настраивать собственную цветовую схему с регулируемой прозрачностью для оптимальной видимости на графике. Основная функция сравнивает свечные модели между текущим графиком и эталонным символом, выделяя бычьи сигналы, когда текущий актив растет, а эталонный падает (или наоборот в инверсном режиме). Это обнаружение дивергенций помогает выявить потенциальные сдвиги импульса и торговые возможности до того, как они станут очевидными при анализе одного актива. Индикатор предлагает гибкую настройку, включая режим обратной корреляции для отрицательно коррелированных пар, и чистое визуальное представление, которое не загромождает ценовой график, обеспечивая при этом мгновенные визуальные подсказки через окрашенные свечи.
Pine Script® 인디케이터
crypto_daytrade의
Smart Money Structure FilterEnglish Description Overview Smart Money Structure Analyzer is a professional trading tool that implements Smart Money Concepts (SMC) to identify key market structure shifts, Break of Structure (BOS), and Change of Character (CHoCH) patterns. This indicator helps traders follow the "smart money" flow by detecting institutional order flow patterns on any timeframe. Key Features Swing Point Detection - Identifies significant highs and lows using fractal-based logic Market Structure Analysis - Classifies market conditions as Uptrend, Downtrend, or Consolidation Break of Structure (BOS) - Detects when price breaks key structural levels Change of Character (CHoCH) - Identifies potential trend reversals Mitigation Levels - Shows potential retracement targets after structure breaks How It Works The indicator analyzes price action through several layers: Swing Detection Algorithm Uses a configurable swing period (3-21 bars) Identifies valid swing highs and lows that are confirmed by surrounding price action Stores the last 20 swings for structure analysis Structure Determination Uptrend: Higher Highs (HH) + Higher Lows (HL) Downtrend: Lower Lows (LL) + Lower Highs (LH) Consolidation: Mixed structure or ranging market Break of Structure (BOS) Logic Bearish BOS: Price closes below the last confirmed Higher Low (HL) Bullish BOS: Price closes above the last confirmed Lower High (LH) Change of Character (CHoCH) Logic Bearish CHoCH: After a bearish BOS, price forms a Lower Low (confirms trend reversal) Bullish CHoCH: After a bullish BOS, price forms a Higher High (confirms trend reversal) Mitigation Levels Calculates potential retracement levels after BOS (typically ±0.2% from broken structure) Visual Elements Fractals: Swing points (optional display) Structure Lines: Last Higher Low (blue) and Last Lower High (purple) BOS Signals: Triangles marking structure breaks CHoCH Signals: Circles confirming trend changes Mitigation Levels: Dotted orange lines for potential retracements Info Label: Real-time structure status and key levels Alerts The indicator provides alerts for: Break of Structure (BOS) events Change of Character (CHoCH) confirmations Settings Swing Period: Sensitivity of swing detection (default: 3) Show Fractals: Toggle swing point markers Show Structure Lines: Display key structure levels Show Break of Structure: Display BOS signals Show Change of Character: Display CHoCH signals Show Mitigation Levels: Display retracement levels Best Practices Use on higher timeframes (1H+) for more reliable signals Combine with volume analysis for confirmation Wait for CHoCH confirmation before entering trades Use mitigation levels as potential entry zones Русское описание Обзор Smart Money Structure Analyzer - профессиональный торговый инструмент, реализующий концепции Smart Money (SMC) для определения ключевых сдвигов рыночной структуры, Break of Structure (BOS) и Change of Character (CHoCH). Индикатор помогает отслеживать поток "умных денег", выявляя паттерны институционального ордерного потока на любом таймфрейме. Ключевые возможности Определение свингов - Выявляет значимые максимумы и минимумы с помощью фрактальной логики Анализ структуры рынка - Классифицирует состояние рынка: Восходящий тренд, Нисходящий тренд или Консолидация Break of Structure (BOS) - Обнаружение пробития ключевых уровней структуры Change of Character (CHoCH) - Определение потенциальных разворотов тренда Уровни митигации - Показывает потенциальные цели отката после пробоя структуры Принцип работы Индикатор анализирует ценовое действие через несколько уровней: Алгоритм определения свингов Использует настраиваемый период свинга (3-21 свечи) Определяет валидные максимумы и минимумы, подтвержденные окружающим движением цены Сохраняет последние 20 свингов для анализа структуры Определение структуры Восходящий тренд: Higher Highs (HH) + Higher Lows (HL) Нисходящий тренд: Lower Lows (LL) + Lower Highs (LH) Консолидация: Смешанная структура или флет Логика Break of Structure (BOS) Медвежий BOS: Цена закрывается ниже последнего Higher Low (HL) Бычий BOS: Цена закрывается выше последнего Lower High (LH) Логика Change of Character (CHoCH) Медвежий CHoCH: После медвежьего BOS формируется Lower Low (подтверждает разворот) Бычий CHoCH: После бычьего BOS формируется Higher High (подтверждает разворот) Уровни митигации Расчет потенциальных уровней отката после BOS (обычно ±0.2% от сломанной структуры) Визуальные элементы Фракталы: Точки свингов (опционально) Линии структуры: Последний Higher Low (синий) и последний Lower High (фиолетовый) Сигналы BOS: Треугольники, отмечающие пробой структуры Сигналы CHoCH: Круги, подтверждающие изменение тренда Уровни митигации: Пунктирные оранжевые линии для потенциальных откатов Инфо-метка: Статус структуры и ключевые уровни в реальном времени Оповещения Индикатор предоставляет алерты для: Событий Break of Structure (BOS) Подтверждений Change of Character (CHoCH) Настройки Период свинга: Чувствительность определения свингов (по умолчанию: 3) Показывать фракталы: Включение/выключение маркеров свингов Показывать линии структуры: Отображение ключевых уровней структуры Показывать Break of Structure: Отображение сигналов BOS Показывать Change of Character: Отображение сигналов CHoCH Показывать уровни митигации: Отображение уровней отката Рекомендации по использованию Используйте на старших таймфреймах (1H+) для более надежных сигналов Комбинируйте с анализом объема для подтверждения Ждите подтверждения CHoCH перед входом в сделку Используйте уровни митигации как потенциальные зоны входа Технические особенности Максимальное количество меток: 500 Работает на любых таймфреймах Не перерисовывает прошлые сигналы Эффективно использует ресурсы благодаря ограничению хранения свингов Индикатор предназначен для трейдеров, работающих с Price Action и концепциями Smart Money, и помогает систематизировать анализ рыночной структуры в соответствии с подходами институциональных трейдеров.
Pine Script® 인디케이터
crypto_daytrade의
Multi-Timeframe Moving Average Tracker Tracks user-defined higher timeframe moving averages on a 1-min chart (maybe higher?). Useful to see where current price is in relation to a higher timeframe (e.g., 5-min, 1-hr) moving average like the 50 period. This allows the trader to determine size position risk based on personal rules (e.g., price below the 1-hr 40p EMA is high risk for lower price, so position size needs to be lightened, etc). The higher timeframe moving average is live and plotted on the lower chart as a line (user-defined type and color) with the timeframe and period noted. It will move as the period closes (i.e., 5-min period closes every 5 minutes, 1-hr period closes every 60 minutes, etc.).
Pine Script® 인디케이터
hu-wah의
Superbank Grid The Superbank Grid automatically plots institutional-grade price zones across Forex, Indices, and Crypto, giving traders a consistent framework for identifying major liquidity areas, psychological levels, and high-probability reaction zones — on any timeframe. This indicator is designed to eliminate guesswork by anchoring price to repeatable, whole-number structures used by professional traders. What It Draws Forex (All FX Pairs) Major Zones: Every 1,000 pips Median Levels: 500 pips Quarter Levels: 250 & 750 pips Minor Grid: 100-pip intervals Examples: EURUSD: Major → 0.7000 · 0.8000 · 0.9000 · 1.0000 · 1.1000 Quarters → 0.7250 · 0.7500 · 0.7750 USDJPY: Major → 60 · 70 · 80 · 90 · 100 · 110 Quarters → 62.5 · 65.0 · 67.5 · 122.5 · 125.0 · 127.5 Indices & Crypto Major “Superbank” Zones: $10,000 Median Levels: $5,000 Minor Grid: $1,000 Ideal for: NAS100 US30 SPX BTC ETH Key Features Works on all timeframes Auto-adapts to Forex, JPY pairs, Indices, and Crypto Prevents chart auto-scale distortion (“screen squish”) Displays only relevant zones near current price Adjustable colors, line weights, and label sizes Optional visibility toggles for Major, Median, Quarter, and Minor levels Best Use Cases Identifying institutional liquidity pools Marking reaction zones and decision points Structuring entries, targets, and stop placement Aligning price action with Big Money levels Swing trading, position trading, and intraday execution Important Notes This indicator is a context and structure tool, not a signal generator. Best used in combination with market structure, order flow, and risk management. Designed to reflect how professional traders segment price, not retail indicators. Who This Is For Traders who think in zones, liquidity, and scale — not random indicators. If you trade: Forex Indices Crypto and want a repeatable framework for understanding where price matters… This tool belongs on your chart.
Pine Script® 인디케이터
mjwforex의
Overnight Mid-pointThis script defines a scrollable intraday session and continuously tracks the highest and lowest candle body closes made during that session, explicitly ignoring wicks. As the session develops, it plots a single horizontal midpoint line (dotted, dashed, or solid by user selection) calculated as the average of those two body closes, extending to the right from the session. For visual verification, it places exactly two dots on the chart: a green dot above the bar with the highest body close and a red dot below the bar with the lowest body close. Each new session resets the calculation, ensuring only one midpoint line and two verification markers are visible at any time. For proper use, 1800 - 0800 local time should be used (may be a couple hours off depending on your region).
Pine Script® 인디케이터
andrew_blichasz의
1