Regular & Dollar Volume (+ projected volume, HVE, bar coloring)Regular & Dollar Volume shows standard or dollar-weighted volume with fast and slow volume averages, projected volume for the live bar, and optional high-volume and percentile spike cues. An optional bar coloring feature reflects direction and volume strength so high-participation moves stand out without clutter.
Main features
- Dollar volume option with selectable price source (Close, Open, High, Low, HL2, HLC3, OHLC4).
- Fast and slow volume averages (SMA or EMA) for quick context.
- The fast average reacts quickly to recent volume, while the slow average represents the broader baseline.
- Bars are classified based on whether volume is above both averages, below both, or between them. This gives a simple three-state read: unusually strong volume (above both), weak volume (below both), or normal (in between).
- Using two averages avoids overreacting to a single spike while still highlighting real regime shifts in participation.
- Projected volume on the active bar to estimate end-of-bar volume.
- High Volume Ever (HVE) labeling and optional HVE bar coloring .
- Optional percentile spike detection with markers, threshold line, and bar highlighting.
- Optional candle recoloring to match volume bar colors .
- Bar colors reflect both direction (up vs down) and volume strength relative to the two averages.
- This helps you spot high-participation moves at a glance and distinguish strong pushes from low-energy drift.
지표 및 전략
Ease of MovementThis indicator provides an implementation of the Ease of Movement
(EOM) indicator, enhanced with a built-in divergence detection
engine.
The EOM highlights the relationship between volume and price change.
High positive values indicate that the price is increasing with
low resistance (ease), while low negative values indicate the
price is dropping with ease.
Key Features:
1. **Full Divergence Suite (Class A, B, C):** The primary feature
is the integrated divergence engine. It automatically
detects and plots all three major types of divergences:
- Regular (A): Signals potential trend reversals (e.g., price
rising but "ease" of movement is diminishing).
- Hidden (B): Signals potential trend continuations.
- Exaggerated (C): Signals weakness at double tops/bottoms.
2. **Divergence Filtering and Visualization:**
- **Price Tolerance Filter:** Divergence detection is enhanced
with a percentage-based price tolerance (`pivPrcTol`) to
filter out insignificant market noise, leading to more
robust signals.
- **Persistent Visualization:** Divergence markers are plotted
for the entire duration of the signal and are visually
anchored to the EOM level of the confirming pivot.
- **Flexible Pivot Algorithms:** Supports various underlying
mathematical models for pivot detection provided by the
core library
3. **Customizable Signal Line:** Includes an optional moving average
of the EOM, which serves as a signal line. The type of
MA (`Signal Smoothing`) and its length can be customized.
This signal line can also be optionally volume-weighted
(`Volume weighted`).
4. **Note on Confirmation (Lag):** Divergence signals rely on a
pivot confirmation method to ensure they do not repaint.
- The **Start** of a divergence is only detected *after* the
confirming pivot is fully formed (a delay based on
`Pivot Right Bars`).
- The **End** of a divergence is detected either instantly
(if the signal is invalidated by price action) or with
a delay (when a new, non-divergent pivot is confirmed).
5. **Multi-Timeframe (MTF) Capability:**
- **MTF EOM & Signal Lines:** The EOM and its signal line
can be calculated on a higher timeframe, with standard
options to handle gaps (`Fill Gaps`) and prevent
repainting (`Wait for...`).
- **Limitation:** The Divergence detection engine (`pivDiv`)
is **disabled** if a timeframe other than the chart's
timeframe is selected. Divergences are only calculated
on the active chart timeframe.
6. **Integrated Alerts:** Includes comprehensive alerts for:
- The *start* and *end* of all divergence types.
- The EOM crossing its signal line.
- The EOM crossing the zero line.
---
**DISCLAIMER**
1. **For Informational/Educational Use Only:** This indicator is
provided for informational and educational purposes only. It does
not constitute financial, investment, or trading advice, nor is
it a recommendation to buy or sell any asset.
2. **Use at Your Own Risk:** All trading decisions you make based on
the information or signals generated by this indicator are made
solely at your own risk.
3. **No Guarantee of Performance:** Past performance is not an
indicator of future results. The author makes no guarantee
regarding the accuracy of the signals or future profitability.
4. **No Liability:** The author shall not be held liable for any
financial losses or damages incurred directly or indirectly from
the use of this indicator.
5. **Signals Are Not Recommendations:** The alerts and visual signals
(e.g., crossovers) generated by this tool are not direct
recommendations to buy or sell. They are technical observations
for your own analysis and consideration.
Retail Forex Sentiment Fear/Greed CurrencyPairsRetail Forex Sentiment Fear/Greed CurrencyPairs
Overview
The Retail Forex Sentiment Indicator provides sentiment data for major and cross currency pairs. This indicator displays retail trader positioning using retail brokers data, showing what percentage of retail traders are long or short on each forex pair.
Important: Indicator Split Notice
---------------------------------
Due to TradingView's limitation of 40 data requests per indicator, the original Retail Sentiment Indicator has been split into TWO separate indicators you will find on TradingView:
1. This indicator - Specialized for Forex currency pairs (30+ pairs)
[2. Retail Sentiment Indicator - Multi-Asset CFD & Fear/Greed Index - For indices, commodities, cryptocurrencies, and Fear/Greed indices
Please look at both indicators to access all available sentiment data.
Methodology and Scale Calculation
---------------------------------
This indicator operates on a **-50 to +50 scale** with zero representing perfect market equilibrium.
Scale Interpretation:
- **Zero (0)**: Market balance - exactly 50% of traders long, 50% short
- **Positive values**: Majority long (buying) pressure
- Example: If 63% of traders are long, the indicator shows +13 (63 - 50 = +13)
- **Negative values**: Majority short (selling) pressure
- Example: If 92% of traders are short, the indicator shows -42 (50 - 92 = -42)
Features
--------
- **Auto-Detection**: Automatically loads sentiment data based on the current chart symbol
- **Manual Selection**: Choose from 30+ supported currency pairs when auto-detection is unavailable
- **Visual Zones**: Clear greed/fear zones with color-coded backgrounds (green for fear zone, red for greed zone - contrarian colors)
- **Daily Updates**: Live sentiment data from retail CFD providers
Supported Currency Pairs
========================
Major Pairs
-----------
- EURUSD (most traded pair globally)
- GBPUSD (Cable)
USD Pairs
---------
- USDJPY, USDCHF, USDCAD
- USDPLN
PLN (Polish Zloty) Pairs
------------------------
- USDPLN, EURPLN, GBPPLN, CHFPLN
EUR Cross Pairs
---------------
- EURJPY, EURCHF, EURCAD, EURAUD, EURNZD, EURGBP
GBP Cross Pairs
---------------
- GBPJPY, GBPCHF, GBPCAD, GBPAUD, GBPNZD
AUD (Australian Dollar) Pairs
-----------------------------
- AUDUSD, AUDJPY, AUDCHF, AUDNZD, AUDCAD
NZD (New Zealand Dollar) Pairs
------------------------------
- NZDUSD, NZDJPY, NZDCHF, NZDCAD
CAD Cross Pairs
---------------
- CADJPY, CADCHF
CHF Cross Pairs
---------------
- CHFJPY
How to Use
----------
1. **Auto Mode** (Default): Enable "Auto-load Sentiment Data" checkbox to automatically display sentiment for the current chart's currency pair
2. **Manual Mode**: Disable auto-load and select from the dropdown menu for specific currency pairs
3. **Interpretation**:
- Values above 0 (green line) indicate retail traders are net long (greed/bullish sentiment)
- Values below 0 (red line) indicate retail traders are net short (fear/bearish sentiment)
- Extreme zones (+35 to +50 and -35 to -50) indicate strong positioning
Trading Strategy & Market Philosophy
====================================
Contrarian Trading Approach
---------------------------
The primary purpose of this indicator is based on the fundamental market principle that **the majority of retail forex traders are wrong most of the time**, and currency pairs typically move opposite to the positions held by the majority of retail participants.
Key Strategy Guidelines:
- **Contrarian Signal**: When the majority of retail traders are positioned on one side, consider opportunities in the opposite direction
- **Trend Exhaustion Signal**: When retail traders finally flip to trade WITH an established trend after being wrong for extended period, this often signals trend exhaustion
Interpretation Examples:
- High greed readings (majority long) -> Consider short opportunities
- High fear readings (majority short) -> Consider long opportunities
- Sudden sentiment flip during established trends -> Potential trend reversal signal
Forex-Specific Notes
====================
Currency Correlations
---------------------
When analyzing forex sentiment, consider that:
- USD pairs often move together (if retail is long EURUSD, they're often short USDJPY)
- Cross pairs can provide confirmation signals
- Comparing sentiment across related pairs can reveal broader positioning
Auto-Detection Support
----------------------
The indicator supports automatic detection of various broker ticker formats including:
- Standard pairs (EURUSD, GBPUSD, etc.)
- CME Futures symbols (6E, 6B, JY, etc.)
- Micro futures (M6E, M6B, MJY, etc.)
This functionality is powered by regex pattern matching. However, for some CME futures pairs—particularly those involving JPY, CAD, and CHF—auto-detection may not work properly. In such cases, disable the auto-load checkbox and manually select the ticker from the dropdown menu.
Technical Notes
---------------
- Built with PineScript v6
- Dynamic symbol detection with fallback options
- Optimized for performance with minimal resource usage
- Color-coded visualization with customizable zones
Data Sources
------------
This indicator uses curated sentiment data from retail CFD providers. Data is updated regularly and sourced from reputable financial data providers.
Data Infrastructure Status
--------------------------
Current Data Upload Process:
Please note that sentiment data uploads may occasionally experience minor interruptions. However, this should not pose significant issues as sentiment data typically changes gradually rather than rapidly.
Acknowledgments
---------------
We extend our gratitude to **TradingView** for enabling the use of custom data feeds based on GitHub repositories, making this comprehensive forex sentiment analysis possible.
Disclaimer
----------
This indicator is for educational and informational purposes only. Sentiment data should be used as part of a comprehensive trading strategy and not as the sole basis for trading decisions. Past performance does not guarantee future results. The contrarian approach described is a market theory and may not always produce profitable results. Forex trading involves significant risk of loss.
Crypto Momentum OscillatorThe indicator uses an adaptive weighting system that dynamically adjusts component importance based on rolling correlations with BTC, creating a composite master score that signals optimal entry/exit conditions when macro tailwinds align with crypto momentum.
Trade ChecklistICT trading checklist. This checklist helps you mark out confluences so you can rate the trade you're about to take and be able to decide if its a good trade or you should skip it. Enjoy
Weekly MAs + 1d 21 SMAThis indicator watches for weekly bullish and bearish alignment on your daily chart. It also triggers a long or short when price touches the 1 Day 21 SMA. It helps ensures a high quality trade setup by trading in a lower timeframe (the 1 Day) while working off stronger signals on the 1 Week timeframe, which are the 3 key moving averages (1W 8 EMA, 1W 21SMA, 1W 50SMA).
The trading rule is as followed:
Short Position:
1. Wait for the 1 week moving averages to align bearish (8 EMA < 21 SMA < 50 SMA). All daily candles will then turn bright red.
2. Wait for a pullback to the 1 Day 21 SMA. Once the wick or body touches this SMA, that candle will turn white. This is the signal that will alert you to be ready to enter into a short position.
3.a. If the candle that changed to white is below the 1 Day 21 SMA, you can enter a short position on the opening of the next daily candle.
3.b. If the candle that changed to white is above the 1Day 21 SMA, wait for the close of the next daily candle. If that candle is below the 21 SMA, enter into your short position at the opening of the next daily candle.
For long positions, you do the same as above but in opposite order.
SMC Full History JBI 1This indicator keeps BOS and CHoCH visible all the way to the oldest bars, revealing true market structure across all timeframes, unlike other indicators that erase historical signals, making trend and reversal zones clear and reliable.
Altangadas Megad //@version=5
indicator("VWAP/MVWAP/EMA Precise Final", overlay = true)
// --- 1. Signal Settings ---
vwapLength = input.int(1, title="VWAP Length", minval=1)
emaLength1 = input.int(7, title="Signal EMA 1 (7)", minval=1)
emaLength2 = input.int(25, title="Signal EMA 2 (25)", minval=1)
mvwapLength = input.int(21, title="MVWAP Length", minval=1)
// --- RSI Settings ---
rsiLength = input.int(14, title="RSI Length")
rsiLimit = input.int(70, title="RSI Filter Level")
// --- 2. Trend EMA Settings ---
ema50Length = input.int(50, title="Trend EMA 50")
ema100Length = input.int(100, title="Trend EMA 100")
ema200Length = input.int(200, title="Trend EMA 200")
ema800Length = input.int(800, title="Institutional EMA 800")
// --- Calculations ---
vwapValue = ta.vwap(hlc3)
cvwap = ta.ema(vwapValue, vwapLength)
mvwap = ta.ema(vwapValue, mvwapLength)
rsiValue = ta.rsi(close, rsiLength)
ema1 = ta.ema(close, emaLength1)
ema2 = ta.ema(close, emaLength2)
ema50 = ta.ema(close, ema50Length)
ema100 = ta.ema(close, ema100Length)
ema200 = ta.ema(close, ema200Length)
ema800 = ta.ema(close, ema800Length)
// --- Plotting Lines ---
plot(cvwap, color=color.blue, linewidth=2, title="VWAP", style=plot.style_linebr)
plot(mvwap, color=color.fuchsia, linewidth=2, title="MVWAP", style=plot.style_linebr)
plot(ema1, color=color.new(color.yellow, 50), title="EMA 7")
plot(ema2, color=color.new(color.orange, 50), title="EMA 25")
plot(ema50, color=color.green, linewidth=1, title="EMA 50")
plot(ema100, color=color.blue, linewidth=1, title="EMA 100")
plot(ema200, color=color.gray, linewidth=2, title="EMA 200")
plot(ema800, color=color.yellow, linewidth=4, title="EMA 800")
// --- Signal Logic (Анхны огтлолцол дээр нэг удаа сигнал өгөх) ---
// LONG: EMA болон VWAP бүгд MVWAP-аас дээш гарахад
longCond = (ema1 > mvwap) and (ema2 > mvwap) and (cvwap > mvwap)
// SHORT: EMA болон VWAP бүгд MVWAP-аас доош ороход
shortCond = (ema1 < mvwap) and (ema2 < mvwap) and (cvwap < mvwap)
// Зөвхөн төлөв өөрчлөгдөх мөчийг барих
longTrigger = longCond and not longCond and (rsiValue < rsiLimit)
shortTrigger = shortCond and not shortCond and (rsiValue > (100 - rsiLimit))
// --- Tiny Signals ---
plotshape(longTrigger, title="L", location=location.belowbar, color=color.green, style=shape.triangleup, size=size.tiny, text="L")
plotshape(shortTrigger, title="S", location=location.abovebar, color=color.red, style=shape.triangledown, size=size.tiny, text="S")
// --- Alerts ---
alertcondition(longTrigger, title="Long Alert", message="XAUUSD: LONG!")
alertcondition(shortTrigger, title="Short Alert", message="XAUUSD: SHORT!")
Trade by Design - v0.0.1Trade by Design - v0.0.1
📊 Overview
This indicator displays key price levels based on New York trading session times (17:00 NYT). It helps traders identify important support and resistance levels from the previous day, previous week, and the current trading day.
💡 Inspiration
This indicator was inspired by concepts presented in this video: www.youtube.com
Thanks to Annii, her youtube channel is www.youtube.com
Also you can check this video about Mastering the UK session www.youtube.com
I created this indicator for my personal trading needs and decided to share it with the community. Please note that this indicator is in its early development stage (v0.0.1) and may be updated or improved over time based on feedback and my trading experience.
📈 What It Displays
1. Previous Week Levels (HoW / LoW) - Orange
HoW (High of Week): The highest price reached during the previous week
LoW (Low of Week): The lowest price reached during the previous week
Week starts at Sunday 17:00 New York Time
2. Previous Day Levels (HoD / LoD) - Aqua/Cyan
HoD (High of Day): The highest price reached during the previous trading day
LoD (Low of Day): The lowest price reached during the previous trading day
Trading day starts at 17:00 New York Time (aligned with futures market open)
3. Initial Day Levels (iH / iL) - Green
iH (Initial High): The current day's running high
iL (Initial Low): The current day's running low
Displays the percentage range between iH and iL in parentheses
Optional: Include or exclude the gap period (17:00-20:00 NYT)
⚙️ Settings
Colors
Prev Week (LoW/HoW): Color for weekly levels (default: orange)
Prev Day (LoD/HoD): Color for daily levels (default: aqua)
Initial Day (iL/iH): Color for current day levels (default: green)
Style
Line width: Thickness of the lines (1-5)
Line transparency: Transparency for current lines (0-90%)
Historical line transparency: Additional transparency for historical lines (0-90%)
Line style: Solid, Dashed, or Dotted
Label offset: Distance of labels from current price (in bars)
Label size: Tiny, Small, Normal, or Large
History
Number of weeks to display: How many weeks of historical data to show (1-10)
Show historical HoD/LoD: Toggle to show/hide previous days' HoD/LoD levels
Show historical iH/iL: Toggle to show/hide previous days' iH/iL levels
Initial Day (iH/iL)
Include gap (17:00-20:00 NYT):
✅ Checked: iH/iL calculation starts at 17:00 NYT
❌ Unchecked: iH/iL calculation starts at 20:00 NYT (excludes pre-market gap)
🕐 Time Reference
All times are based on New York Time (America/New_York timezone):
17:00 NYT: Start of the trading day (aligned with futures/forex session)
20:00 NYT: Alternative start time for iH/iL when gap is excluded
📝 Label Naming Convention
Current Levels:
HoW, LoW (Previous Week)
HoD, LoD (Previous Day)
iH, iL (Current Day) - includes percentage range
Historical Levels (when enabled):
HoW2, LoW2, HoW3, LoW3... (Older weeks)
HoD2, LoD2, HoD3, LoD3... (Older days)
iH1, iL1, iH2, iL2... (Previous days' initial ranges)
🎯 How to Use
Support & Resistance: Use HoW/LoW and HoD/LoD as potential support and resistance levels
Range Trading: Monitor the iH/iL percentage to gauge daily volatility
Breakout Trading: Watch for price breaking above HoD/HoW or below LoD/LoW
Multi-Timeframe Analysis: Enable multiple weeks to see longer-term levels
⚠️ Disclaimer
This indicator is in early development (v0.0.1) and was created for personal trading use
Past price levels do not guarantee future support/resistance
Always use proper risk management and combine with other analysis methods
This is not financial advice - trade at your own risk
🔄 Version History
v0.0.1 (Current)
Initial release
Previous week high/low (HoW/LoW)
Previous day high/low (HoD/LoD)
Initial day high/low (iH/iL) with percentage range
Multiple weeks history support
Customizable colors, transparency, and label sizes
Gap inclusion/exclusion option for iH/iL
💬 Feedback
This indicator is a work in progress. If you have suggestions for improvements or find any issues, please leave a comment below. Your feedback helps make this tool better for everyone!
Happy Trading! 📈
Session Fibonacci 20 Levels FixedAsia range STDV to measure reversals Asia range STDV to measure reversals Asia range STDV to measure reversals
AUTO FIB PRO - VWAP Bias and Retrace Breakouts (DAX NQ) v6AUTO FIB PRO by funnelzon automatically detects swing points (pivot highs/lows), draws dynamic Fibonacci levels, highlights the key retracement area (0.236–0.618), and prints continuation-style BUY/SELL signals after a retrace. It also includes VWAP + VWAP zone (ATR-based), a configurable trend filter (EMA200 / HTF EMA200 / VWAP / combined “BEST”), session & volatility filters, a CHOP blocker, a top-right “traffic light” status panel, and optional manual R/S zones (R1–R4 & S1–S4) with width presets and background highlighting.
1) Auto Swing → Auto Fibonacci
The script detects swing points using pivot highs/lows.
Once two valid swing points are available (P1 → P2), it plots Fibonacci levels:
0.236 / 0.382 / 0.500 / 0.618 / 0.786 / 1.000
Lines extend to the right and update automatically with new swings.
2) Retracement Box (0.236–0.618)
The yellow retracement box marks the key pullback area between 0.236 and 0.618.
Optional ATR padding can slightly widen the box (helps with “near touches”).
3) VWAP + VWAP Zone + VWAP Bias Label
VWAP line is optional.
VWAP zone is an ATR-based band around VWAP.
Bias label shows: BULL / BEAR / NEUTRAL, placed outside the chart (left/right selectable).
4) Filters (to avoid low-quality market phases)
Session Filter (DAX / NQ sessions in CET)
ATR-Min Filter (blocks low volatility)
CHOP Filter (blocks markets that get “stuck” inside the retracement zone for too long)
5) Signals (Continuation After Retrace)
Default behavior (Continuation ON):
Retracement zone must be touched first (setup becomes “armed”).
Signal triggers only when price breaks out across the box edge:
BUY: crossover above retrace top + bullish candle + filters OK
SELL: crossunder below retrace bottom + bearish candle + filters OK
Alternative (Continuation OFF):
More aggressive signals can trigger already inside the retracement box.
6) Signal Quality Modes
MORE Trades: looser rules, more signals (optional counter-trend allowed)
A+ ONLY: stricter rules (RSI + EMA slope + trend alignment)
7) Traffic-Light Panel (Top Right)
Shows in real time:
Auto preset type (DAX/NQ + Scalp/Swing + FAST/STABLE)
STATUS: TRADE OK / NO TRADE (and the reason)
Direction: LONG / SHORT / WAIT
Selected trend filter mode
VWAP bias
Pivot length
8) Manual Support/Resistance Zones (R1–R4 & S1–S4)
8 zones as price “areas” (boxes), extended left/right in time
Width presets: Narrow / Normal / Wide or Manual (Points/ATR)
Optional background highlighting when price is inside a zone
Key Features
Auto Swing Detection (Pivot High/Low) → builds P1 → P2 swing
Auto Fibonacci Levels: 0.236 / 0.382 / 0.500 / 0.618 / 0.786 / 1.000
Retracement Box: 0.236–0.618 (+ optional ATR padding)
VWAP Line + VWAP Zone (ATR-based)
VWAP Bias Label: BULL / BEAR / NEUTRAL (outside the chart)
Trend Filter Modes: OFF / EMA200 / HTF EMA200 / VWAP / HTF EMA200 + VWAP (BEST)
Trade Quality Modes:
MORE Trades (looser, more signals)
A+ ONLY (stricter: RSI + EMA slope + trend alignment)
Gate Filters:
Session filter (DAX / NQ CET sessions)
ATR-min filter (blocks low volatility)
CHOP filter (blocks extended sideways inside retrace zone)
Traffic Light Panel (Top Right): STATUS, DIR, FILTER, VWAP BIAS, PivotLen
Manual Zones (R1–R4 / S1–S4):
Width presets: Narrow / Normal / Wide (or Manual via Points/ATR)
Optional background highlight when price is inside a zone
Signals (Logic)
Default (Continuation ON):
Setup becomes “armed” after retracement zone touch
Signal triggers only on breakout:
BUY: close crosses above retrace top + bullish candle + filters OK
SELL: close crosses below retrace bottom + bearish candle + filters OK
Continuation OFF: more aggressive signals can trigger already inside the retracement box.
Recommended Setup (Quick Presets)
Clean & Reliable (recommended)
Auto Presets: ON
Mode: AUTO / SCALP (1/5/15)
Auto Fib Mode: STABLE
Quality: A+ ONLY
Continuation: ON
Trend Filter: HTF EMA200 + VWAP (BEST)
Session filter: ON
ATR-min: ON
CHOP filter: ON
More Trades
Auto Fib Mode: FAST
Quality: MORE Trades
Trend Filter: VWAP or EMA200
FAQ (Quick)
Q: Why do I see “NO TRADE” in the panel?
A: One of the gate filters blocks signals (outside session, ATR too low, or CHOP detected).
Q: Why no signals even though price is moving?
A: A valid swing (P1→P2) must exist, retrace zone must be touched (Continuation ON), and trend/quality filters must pass.
Q: What does CHOP mean here?
A: Price stayed inside the retracement zone for too many bars → higher noise → signals disabled until conditions improve.
Q: DAX vs NQ feels different — what should I change first?
A: Start with Market Preset, then adjust VWAP zone ATR mult and CHOP bars limit.
Disclaimer
Educational/analytical tool only. Not financial advice. Use risk management and confirm signals with market context.
Bitcoin Power Law Bottom PriceThis is a super simplified version of Bitcoin Rainbow Wave script.
I removed everything except the power law bottom band.
SwiftEdge ApexThis open-source indicator is designed to help traders visually identify aggressive volume activity ("big trades"), place it in the context of dynamic price deviation from an exponentially weighted VWAP, track a developing Point of Control (POC) during a user-defined session, and highlight potential absorption or exhaustion patterns.
Core Components and Original Integration:
Adaptive VWAP with EWMA Deviation Bands
Instead of a standard cumulative VWAP, the script calculates an exponentially weighted moving average (EWMA) of variance on price-volume data (using a user-adjustable lambda sensitivity). This produces smoother, faster-adapting standard deviation bands (1σ to 3σ) that highlight statistically significant price extensions more responsively than simple moving averages.
Tiered Big Trade Detection (Footprint-Style Bubbles)
Volume is compared against a simple moving average over a user-defined lookback period. Trades exceeding customizable multipliers (1.2× to 8×) and a minimum volume threshold are flagged.
For Premium users, the bubble is plotted at the volume-weighted average price within the bar's 1-second sub-bars (true footprint precision). Non-Premium users fall back to the bar's close price (no errors occur). Bubble size scales with multiplier strength, with white outlines on the largest ones for clarity, and bubbles are colored green/red based on candle direction.
Live Session-Based POC
Volume is accumulated at price levels (rounded to 10 ticks) starting from a configurable session time (default 09:00). The array resets on new sessions or daily changes, producing a developing POC line that acts as a potential value-area magnet or support/resistance reference.
Absorption & Exhaustion Filters
Absorption: High-volume bars with unusually small range (below average range × user multiplier) are marked with lime/red triangles — suggesting hidden buying/selling pressure.
Exhaustion: Extremely high-volume bars with tiny bodies (small close-open relative to range) receive a background tint and "EXH" label — indicating potential climactic activity or fatigue.
How the Elements Work Together:
The VWAP bands provide overall market context (is price extended?). Big-trade bubbles show where aggressive participants are active. The session POC adds a developing fair-value reference. Absorption and exhaustion signals help interpret whether big volume is being met with resistance (absorption → possible continuation) or capitulation (exhaustion → possible reversal). Together they create a layered "smart money footprint" overlay rather than isolated plots.
How to Use the Indicator:
Apply to liquid instruments with reliable volume data (futures, major stocks, large-cap crypto).
In the "Big Trade Bobler" settings:
Adjust lookback period and minimum volume to reduce noise.
Tune multipliers (lower = more signals, higher = stronger but rarer events).
Turn "Use Premium Bubbles" off if you do not have TradingView Premium (script gracefully uses bar close instead of 1-second data).
Set session start hour/minute for POC calculation (e.g., NYSE open at 9:30).
Enable/disable absorption triangles and exhaustion highlights/labels based on preference.
Interpretation tips:
Watch for clusters of large bubbles near VWAP ±2σ/3σ or close to the POC line.
Absorption on trend bars may indicate continuation.
Exhaustion often appears at swing highs/lows and can precede reversals.
Important Limitations:
1-second footprint precision requires TradingView Premium; non-Premium accounts use standard bar close (still functional but less granular).
Volume data quality depends on the symbol and data feed (tick volume is used as proxy on forex/crypto).
This is a discretionary visualization tool — not a mechanical strategy, no entry/exit signals, and no performance backtest is included.
Volume spikes and patterns do not predict future price movement with certainty; always use in combination with your own analysis and proper risk management.
MTF Trend MAs (H1+H4) MTF Trend MAs (H1+H4) — per-line styles
This indicator plots three trend moving averages (20 / 50 / 200) from two higher timeframes (H1 and H4) directly on your current chart. It is designed to help you monitor multi-timeframe dynamic support/resistance levels and overall trend structure without switching charts.
Features
Multi-timeframe overlay
Plots H1 and H4 moving averages on any chart timeframe.
Three MA sets
Fast: 20
Mid: 50
Slow: 200
Configurable MA types
Choose the calculation type for each MA length: EMA / SMA / WMA / RMA.
Independent visibility toggles
Enable/disable each individual line:
H1 20 / 50 / 200
H4 20 / 50 / 200
Per-line styling
For every MA and timeframe you can set:
Color
Line width
Line style (Solid / Dashed / Dotted)
Notes / Limitations
The script uses request.security(..., lookahead_off) to avoid repainting from future data.
TradingView plot() does not support true dashed/dotted line rendering like line.new().
In this script the style options are approximations:
Solid = normal line
Dashed = linebr (broken/stepped appearance)
Dotted = circles
If you need true dashed/dotted styles, the indicator can be rewritten using line.new() for real line styles.
Last 4H Range + Fibs + Bias Last Closed 4H Range + Fibs + Bias
This indicator displays the last fully closed 4-hour (4H) candle range and projects it forward as a higher-timeframe framework for intraday trading.
Features
Last Closed 4H Range Box
Plots the high and low of the most recent completed 4H candle (non-repainting).
4H Fibonacci Levels
Automatically draws key internal levels (25%, 50% EQ, 75%, 61.8%, 78.6%).
4H Bias Detection
Bias is determined using the 4H close relative to the 50% equilibrium:
Above EQ → Bullish Bias
Below EQ → Bearish Bias
Bias Flip Alerts
Alerts trigger only when the 4H candle closes and bias changes.
Execution-Friendly Design
No candle colouring. Clean structure for use on lower timeframes.
Order VolumeGranular order volume.
Mainly to be used in other indicators where accurate order flow is needed.
Uses 1S security to pull higher resolution data and then adds into bin based on candle size of chart.
1S can be changed to different time frames based on data limitations.
Plot delta.
[AboBassel] RS + RS.ROC + Inverted ATR (Unified Channel)
This is a multi-indicator channel tool combining Relative Strength (RS), RS Rate of Change (RS.ROC), and Inverted ATR Percentage (ATRP) into a single unified channel for clear visual trend analysis.
Features:
• All three lines are normalized into one visual channel with five distinctive threshold levels (Upper/Lower Curbs, Inner Bands, and Middle).
• RS , ATR , ROC Lines all are invertable for better follow up on trends
• RS.ROC period and timeframe are editable independently from RS.
• ATR time frame and lookback period are fully adjustable.
• Channel thresholds are fully editable. Lines can exceed upper/lower curbs, showing extreme conditions.
• Suitable for trend detection, swing trading, and risk assessment.
Usage Tips:
• Look for lines crossing bands or curbs for potential trade setups.
• Observe background color for overall market sentiment.
• Major blue arrows indicate strong shifts in trend direction.
Ideal For: Swing traders, trend followers, and advanced technical analysts who want combined momentum, volatility, and relative strength insights in a single chart.
Trend-cycle reversion (multi-timeframe)Trend-cycle reversion (multi-timeframe) is a mean-reversion “stretch” gauge built around a simple idea: price often deviates from its recent path (trend + dominant swing rhythm), and those deviations become more actionable when you scale them by volatility and express them as a standardized score.
This script models the last N bars as:
1) a linear trend (to capture drift), plus
2) a single dominant cycle (to capture the most prominent oscillation inside the same window).
It then measures how far current price is from the model’s next-bar projection, normalizes that distance by ATR (volatility), and finally converts the result into a rolling Z-score. The output is displayed as a multi-timeframe dashboard so you can see “stretch vs. fit” across several time compressions at once.
------------------------------------------------------------
What you see on the chart
------------------------------------------------------------
The indicator draws a table (overlay) with up to 12 rows (configurable), one per timeframe from your CSV list.
Each row shows:
• TF: The timeframe being evaluated (e.g., 1, 5, 15, 60, 240, D).
• Z: The current Z-score of the volatility-scaled model gap on that timeframe.
• State: A simple interpretation using your Z threshold:
- “Short ▼” when Z > +threshold (price is extended above the model path)
- “Long ▲” when Z < −threshold (price is extended below the model path)
- “Hold •” when inside the band (not unusually stretched)
Colors follow the same logic: red for high positive Z, green for high negative Z, gray when neutral or unavailable.
Important: “Long/Short” here describes the direction of mean-reversion pressure (over/under the fitted path), not a complete trading system by itself.
------------------------------------------------------------
How it works (plain-English math)
------------------------------------------------------------
1) Optional log transform
If “Fit on log(price)” is enabled, the model runs on log(price) instead of raw price. This is often useful for markets that behave multiplicatively (large percentage moves, long-term exponential growth), because distances become closer to “percent-like” rather than absolute dollars.
2) Trend fit (linear regression in the window)
Over the last Window Length bars, the script estimates a straight-line trend. Think of this as the baseline path that best explains the window if you ignore swings.
3) Cycle search (best period by least-squares error)
After removing the linear trend, the script searches for a single sinusoidal cycle period between:
• Min Period and Max Period (in bars), stepping by Period Step.
For each candidate period, it computes the best-fitting sine+cosine components and measures the remaining error (SSE). The period with the smallest SSE is selected as the “best” cycle for that window.
To reduce recalculation cost and to keep the chosen cycle from flapping every bar, the script re-runs this period search only every “Re-search best period every N bars”. Between searches, it keeps using the last best period.
4) Next-bar projection and “gap”
Using the fitted trend + fitted cycle, the script projects the model value one bar ahead (relative to the window indexing). It then computes:
gap = (current value) − (projected value)
If “Invert sign” is enabled, the gap is multiplied by −1. This doesn’t change magnitude, it only flips interpretation (useful if you prefer the opposite sign convention).
5) Volatility scaling via ATR
The raw gap is divided by ATR to make it comparable across symbols and regimes. If you are fitting on log(price), ATR is also computed in log space using a log-based true range, then smoothed similarly (so the scale is consistent).
This produces a “gap in ATR units”.
6) Z-score standardization
Finally, the script computes a rolling Z-score of the ATR-scaled gap over “Z-score length”:
Z = (gapATR − mean(gapATR)) / stdev(gapATR)
This is what appears in the table. The Z-score answers: “How unusual is today’s model deviation compared to the last Z-score length observations?”
------------------------------------------------------------
How to interpret the Z-score
------------------------------------------------------------
Z near 0:
Price is close to the model path relative to recent volatility (nothing unusual).
Z above +threshold:
Price is meaningfully ABOVE the fitted path (stretched up). This can be read as elevated downside mean-reversion pressure — but it can also persist during strong trends.
Z below −threshold:
Price is meaningfully BELOW the fitted path (stretched down). This can be read as elevated upside mean-reversion pressure — but it can also persist during fast selloffs.
A practical way to use this indicator is to treat it as a “context filter” or “risk tool”:
• Fading extremes: look for mean-reversion setups when Z is beyond the threshold and price action confirms (e.g., momentum stalls, structure breaks, volatility contraction/expansion cues).
• Trend-aware reversion: only take “reversion” signals in the direction permitted by your separate trend filter (higher-timeframe trend, moving average regime, market structure, etc.).
• Take-profit / risk management: in a trend-following strategy, extremes can be used as partial profit zones or as “don’t chase here” warnings.
------------------------------------------------------------
Multi-timeframe (MTF) notes
------------------------------------------------------------
Each table row is computed with request.security() on that timeframe with no lookahead, so it is not using future bars to form the value.
However, like any live indicator, the value for an actively forming bar can change until that bar closes (especially on the lower timeframes). Also, higher-timeframe rows update when that higher-timeframe bar updates/closes.
------------------------------------------------------------
Inputs (what to change first)
------------------------------------------------------------
If you only change a few settings, start here:
• Window Length:
Controls how much history the model uses. Larger = smoother/stabler, but slower to adapt.
• Min/Max Period + Step:
Controls the cycle search range and granularity.
- Wider ranges can capture more possibilities but cost more computation.
- Smaller steps can find a closer match but also cost more.
• Re-search every N bars:
Higher = faster performance and more stability; lower = more adaptive but can be noisier.
• ATR length (scale gap):
Controls the volatility scale. Shorter reacts faster to volatility changes; longer is steadier.
• Z-score length:
Controls how “rare” extremes are. Longer lengths make Z more stable, but require more history and adapt slower to regime shifts.
• Z threshold:
Defines when the table labels “Long/Short”. Common choices are 1.5–2.5 depending on how selective you want extremes to be.
• Timeframes (CSV) + Max table rows:
Controls what you see in the dashboard.
------------------------------------------------------------
Limitations and expectations
------------------------------------------------------------
This is a single-cycle, windowed model. Markets can be multi-cycle, non-sinusoidal, or structurally shifting; in those cases the “best period” is simply the best approximation inside the window, not a guarantee of a true underlying rhythm.
Z-score extremes are not automatic reversal calls. In strong trends or during volatility shocks, Z can stay extreme longer than expected. Use this as a measurement tool, then combine it with your own confirmation and risk management.
This indicator is for analysis/education and does not provide financial advice.
Momentum Fusion (CCI + RSI)1. The CCI Engine (Trend & Deviation)
The White Line: Represents the raw Commodity Channel Index. It measures how far the current price is from its statistical average.
The Yellow Line: An EMA (Exponential Moving Average) of the CCI. This acts as a "trigger." Instead of buying the moment the CCI turns up, you wait for the White line to cross the Yellow line, confirming a shift in momentum.
Key Zones:
Above +100: Strong Bullish Trend (Common in your IREN and SNDK holdings).
Below -100: Strong Bearish Trend or "Oversold" (Watch for this in NEM or APA).
2. The RSI Filter (Velocity & Exhaustion)
The Aqua Line: Represents the Relative Strength Index.
The Scaling: Since RSI usually lives between 0–100 and CCI fluctuates between -200 and +200, the script automatically "stretches" the RSI so you can compare it directly to the CCI on the same pane.
Logic: It prevents "chasing." If the CCI tells you to buy, but the RSI is already near the top of the chart, the script will be cautious.
3. Visual Alerts & "Fusion" Signals
Buy Label (Green): Appears when the CCI crosses back above the -100 line (recovering from a dip) AND the RSI is below 40 (meaning there is plenty of "room" to grow before the stock gets tired).
Sell Label (Red): Appears when the CCI crosses below +100 (losing steam) AND the RSI is above 60 (indicating the move is likely exhausted).
Background Highlighting: * Green Shading: High-conviction buying zone (Extreme Oversold).
[Saga Trading] Liquidation Leverages ProThis indicator is designed to provide context on leverage-related market risk, not trading signals.
Its purpose is to help traders visualize price areas where leveraged positions become vulnerable due to increased exposure, rather than to predict forced events.
By mapping zones where leverage sensitivity increases, the script highlights areas of potential instability, where price reactions may accelerate due to risk management constraints, margin pressure, or position adjustment.
These zones do not imply direction and should not be interpreted as targets. Instead, they offer risk awareness, helping traders assess where market movement may become less stable or more reactive.
This tool is intended as a contextual risk-mapping indicator, allowing traders to better evaluate exposure when price approaches leverage-sensitive areas.
It does not provide buy or sell signals and should be used in conjunction with price action and market structure analysis.
Key Levels - Prop Trader JourneyKey Levels – Prop Trader Journey (Intraday Levels + Clean Right-Side Layout)
This indicator plots session-based reference levels commonly used for intraday futures/stocks, with a focus on clean chart layout and label collision handling.
What it plots (toggle each on/off)
Today’s RTH High/Low (TDH/TDL)
Opening Range High/Low (ORH/ORL) based on the first N minutes after RTH open
Pre-Market High/Low (PMH/PML) based on the premarket session window
First Hour High/Low (1HH/1HL) based on the first N minutes after RTH open
Yesterday’s RTH High/Low (YDH/YDL) captured at the next RTH open
RTH Open price
RTH Average line (AVG) using a selectable source (HL2 / HLC3 / OHLC4 / HLCC4)
This Week / Last Week levels (O/H/L/C + Avg) from the weekly timeframe
Optional Session Open level at a configurable time (default 18:00 NY)
2 Custom price levels (optional extend-left)
How levels are calculated (high level)
The script detects whether the current bar is inside RTH / Pre-Market / Opening Range / First Hour using your chosen time zone and session templates.
High/Low levels update in real time while inside each session window. Premarket levels are cached so they remain visible after premarket ends.
Weekly levels are pulled from the weekly timeframe to provide higher-timeframe context.
Display modes
Compact mode: levels are drawn in a compact “right-side” layout using a configurable right offset and line length.
Pivot mode: levels originate from the bar where the level was established/updated and extend toward the right.
Label collision handling (the “unique” part)
When multiple levels are close together, labels can overlap. This script supports:
Merge: combine nearby levels into one label within a tick threshold
Stack: show separate labels stacked vertically
Merge + Stack (4+): merge normally, but stack when there are many levels
This helps visualize confluence/stacked zones without clutter.
Customization
Every level has its own color / line style / width controls. Labels have adjustable text/bg/size, and custom levels can extend left by a user-defined number of bars.
How to use with you trade
Use these levels as reaction areas (support/resistance, rejection, breakout/retest). When labels “stack” or multiple names appear merged at similar prices, that signals confluence—often a more important zone than a single level.
ICT Kill Zone [KTY]ICT Kill Zone Indicator
This indicator displays ICT Kill Zones, which are high-liquidity trading periods during major exchange opening hours.
Smart money tends to make significant moves during these times, resulting in increased volatility and trading volume.
Four Kill Zones
- AS KZ (Asian): Lower volatility, range formation period
- LDN KZ (London): European session start, liquidity surge
- NY KZ (New York): Europe + US overlap, strongest moves
- LDN CL KZ (London Close): London closing, position unwinding period
Market Hours Display
- Shows actual trading hours for Asian, London, and New York markets
- High/low lines for each session
Session Indicators
- Visual markers at the bottom of chart showing active kill zones
- Labels when each kill zone begins
1. Identify which kill zone is currently active
2. Signals during kill zones (CHoCH/BOS, OB, FVG) have higher significance
3. Watch for Asian range breakout in London/New York sessions
4. Be cautious of false moves outside kill zone hours
Pro Tips:
- New York kill zone typically has the strongest moves
- London open often sets the daily direction
- Asian session forms the range that gets broken later
- Combine kill zones with other ICT concepts for best results
Show Kill Zones: Toggle kill zone display on/off
Show Market Hours: Toggle market hours lines on/off
Show Latest Data Only: Display only the most recent kill zone
Daylight Saving Time: Apply DST adjustment (On/Off)
Asian Kill Zone Started
London Kill Zone Started
New York Kill Zone Started
London Close Kill Zone Started
This indicator is designed for educational purposes.
Kill zones only display on 15-minute or lower timeframes.
Always combine with proper risk management.
If you find this indicator helpful, please leave a like and follow for more ICT-based tools!
