Lots / Leverage / Margin [JoseMetal]============
ENGLISH
============
- Description:
This is a utility indicator, it prints a table with ATR, Volatility, Lotage and Margin for 3 custom timeframes, using the ATR of basis, it calculates volatility (%) and a recommended lotage depending on your risk settings.
A few months ago i fled from crypto exchanges to regulated brokers, and working with lots instead of plain margin was a bit of headache, i also trade with crypto, currencies, metals and indexes, each with different volatility, leverage... so this tool was a MUST for me to code.
So basically, this tool allows to keep the same RISK for every single asset, no matter if they have different volatility.
- Visual:
The indicator shows a table with all the info explained, ATR, Volatility...
For each timeframe it also prints 3 periods, short, long and average, you can show/hide timeframes and the different periods.
- Customization:
Colors in the table are custom, as well as the font size.
The risk management settings start with the margin you want to use as average, then you can customize your asset leverage, the risk (which is a value you HAVE to keep the same for all assets to balance the results correctly) and units per lot.
You can increase/decrease risk if you want to, i personally take DAILY values with a 18-20 risk to trade on a 4H chart.
For the "units per lot" take in mind that usually that value is ONE, but in some assets with really low value like currencies or some crypto your broker can set 1 lot to xxxx units, that's why you have that option.
- Usage and recommendations:
As i said i trade from 4H to daily, that's why my risk setting is 18-20, i use the lots plotted in the table on DAILY.
If you're more a scalper, just adjust the timeframes to your needs :)
Enjoy!
============
INGLÉS
============
- Descripción:
Este es un indicador de utilidad, imprime una tabla con ATR, Volatilidad, Lotaje y Margen para 3 temporalidades personalizadas, usando el ATR de base, calcula la volatilidad (%) y un lotaje recomendado dependiendo de tu configuración de riesgo.
Hace unos meses cambié de intercambios crypto (exchanges) a brokers regulados, y trabajar con lotes en lugar de margen simple era un poco dolor de cabeza, también tradeo con crypto, divisas, metales e índices, cada uno con diferente volatilidad, apalancamiento... así que esta herramienta era IMPRESCINDIBLE para mí de programar.
Básicamente, esta herramienta permite mantener el mismo RIESGO para cada activo, sin importar si tienen diferente volatilidad.
- Visual:
El indicador muestra una tabla con toda la información explicada, ATR, Volatilidad...
Para cada temporalidad también imprime 3 períodos, corto, largo y medio, puedes mostrar/ocultar los marcos temporales y los diferentes periodos.
- Personalización:
Los colores de la tabla son personalizados, así como el tamaño de la fuente.
La configuración de la gestión del riesgo comienza con el margen que deseas utilizar como promedio, a continuación, puedes personalizar el apalancamiento del activo, el riesgo (que es un valor que TIENE que mantener igual para todos los activos para equilibrar los resultados correctamente) y las unidades por lote.
Puedes aumentar/disminuir el riesgo si quieres, yo personalmente tomo valores DIARIOS con un riesgo de 18-20 para operar en un gráfico de 4H.
Para las "unidades por lote" ten en cuenta que normalmente ese valor es UNO, pero en algunos activos con valor realmente bajo como divisas o algunas criptomonedas tu broker puede poner 1 lote a xxxx unidades, por eso agrego esa opción.
- Uso y recomendaciones:
Como dije yo opero de 4H a diario, por eso mi ajuste de riesgo es de 18-20, uso los lotes graficados en la tabla en DIARIO.
Si eres más un scalper, sólo tienes que ajustar las temporalidades a tus necesidades :)
¡Que lo disfrutes!
Lotsize
Forex Lot Size CalculatorI grew very tired of opening a Forex Calculator Website in the moment I wanted to enter a trade copying and pasting the values as fast as I can to make sure my trade is the correct size like a responsible trader before I hit the buy button :') SO I put together this indicator tool to make the process faster and just better for myself. I have been using it for a bit and I have found it very helpful in my own process so I thought I should share it with the TV community.
The indicator does as it's title suggest. Simply add it to your chart follow to two prompts...Step one select your entry price. Step two select your stop loss price. The indicator will then load the position box for your trade. In the settings you can set your account balance, Risk % per trade and your risk to reward ratio. You also have the option to change the account base currency, the indicator will calculate the lots required to reflect the base currency that you have selected.
Things to note: This calculator is intended to give you a quick idea of an appropriate lot size for your desired trade there are many different factors that many influence the results of the calculations. Please take the time to review the results before entering your trades this tool is intend to add in your process; calculations are not guaranteed. The tool is for the Forex Market obviously.
For the most efficient way to deploy this tool I've found keeping it in my favorites section of my indictors is the best way to use it. I add it to the chart sets my points read the lots then remove it from the chart. You can modify the settings for the entry and stop each time and just leave the indictor on the chart however if you trade many pairs it becomes more tedious to type in manually the new price levels each time. It is far more simpler and fast to grab the tool out of the favs tab click the two points and read the result. Just remember to save your account settings ie: Balance, Risk, Base currency, etc...as the default settings of the indicator so everything is set up when you want to use it( You can save your settings at the bottom of the settings tab). I truly hope this tool helps your process. God bless and happy trading.
Interactive Lot/Position Calculator FTX/OKX DCA [RDM13-NOSTRA] Interactive script to calculate lot and position size when you use TradingView to trade on FTX or OKX. You can also use multi positions for DCA strategy.
After adding an indicator and making an initial interactive selection on the chart, you can modify the selection points by selecting the indicator and moving the points on the chart.
Forex Lot Size CalculatorTo use indicator you need to provide enter and stop prices(you can drag these lines also). Also you able to set your Account Size in USD, Risk in % and Commission you pay your broker per lot.
Indicator calculates all this information and provides you with Lot Size(with commission) you need to open a position and target prices for 2R and 3R(also includes commission).
Feel free to comment and request new features.
Forex Lot Size Calculator [AKCHOOO]Forex Lot Size Calculator based off stop loss (ticks), also shows the lot size needed for taking partials (based of % of trade to close partial position).
credits
inspired by @DewMic
adapted from @hanabil
Position Size CalculatorPosition size calculator!
Lotsize is calculated by using properties described below.
Properties:
- Show position size: Will only be visible on 5m - 15m - 60m chart
- Account Currency:
- Account Size: Between 0 and 10 000 000 units of currency
- Risk: Between 0 and 100%
- Stoploss: Between 0 and 200 pips
- Textcolor
- Contract sizes for different assets:
- Indices: SPXUSD, DE30, NAS100, US30
- Bonds: ZB, ZN, ZF
- Gold: XAUUSD
- Oil: XTIUSD
- Currency futures: 6A, 6B, 6C, 6E, 6J, 6N, 6S
Other symbols can be added by request.
Enjoy!
Trade Helper [Trading Nerd]Position Size Calculator / Lot Size Calculator
Disclaimer: I do my best to avoid wrong calculations and bugs. I provide this indicator without warranties of any kind. You bear all risks associated with the use of this indicator.
Inputs:
Market: Adds a name tag to the Table to keep track of the trades.
Entry Price: The entry Price of the Position.
Entry Time: The entry Time/Candle of the Position. If Stop Loss Type is 'ATR' or 'HH/LL' the Value for this is calculated by this Candle.
Stop Loss Type: Changes the Stop Loss Type.
Direction: Define if the trade direction is 'Long' or 'Short'. Has no effect on Stop Loss Type 'Custom'. For this you can just set the Stop Loss below/above the Entry Price .
ATR Multiplier: Multiplies the ATR Value by this number. Has only an effect on Stop Loss Type 'ATR'.
HH/LL Lookback Length: Lookback length for determine Highest High/Lowest Low value. Has only an effect on Stop Loss Type 'HH/LL'.
Custom SL Price: The Stop Loss Price if the Stop Loss Type is set to 'Custom'.
Risk Reward Ratio: The Risk is multiplied by this number to determine the Take Profit Price.
Balance: Balance Amount and Currency
Contract Size: The Position Size is divided by this number. E.G. in Forex one Lot is 100.000 Contracts. Change this Value depending on your Broker and Market.
Risk in %: Percent that is risked of the Balance for one Trade.
MM ATR Risk CalculatorBased on the NNFX Lot size position calculations MoneyMovesInvestments would like to provide to you the Free MM Atr Risk calculator
Directions are simple
Tells you the Atr value
Stop loss in pips
You can enter your account size
Based on your account size, enter the percent you want to risk
then the calculator will tell you your stop loss in pips based on current market and your lot size based on the account size and percent you want to risk
Check us out for your other trading needs
Link below or PM us for access to our other indicators
Happy Trading
LotSizeCalc_v1 (EUR)Hey there,
here I like to publish my first TradingView Script for the Indicator "LotSizeCalc" which calculates the LotSize for the currency '€' for e.g. the MT4-App depending on the following parameters:
- Stop Loss in pips (example: 30 pips)
- Account Balance in EUR (example: 500€)
- Risk in % (example: 1%)
It is very similar to the MyFxBook Calculator on their website, where you can compare the results for the lotsize.
You receive the calculated value next to the indicator, and - for mobile device - it also shows a label with the calculated lotsize (which you can deacivate via settings if you like).
The indicator works for the included common foreign Forex pairs (AUD, CAD, CHF, JPY, JPY, GBP, NZD, USD) in order to calculate the risk to a EUR-Trading Account.
Actually, the Script allows in general some adaptations due to your trading system. This one is the most basic version.
Happy pips and I wish you safe and risk-calculated trading!
Marcel :)
