지금 시작

차트 패턴

COIN-Clean Market Structure & Trend Confirmation TP(Updated)COIN-Clean Market Structure & Trend Confirmation TP(Updated) — COIN (Simple Trend + Buy/Sell Confirmation + Take-Profit Targets) This indicator is designed to help you trade COIN by clearly showing trend direction, confirmation signals, and predefined take-profit levels. It removes guesswork and helps you stay on the right side of the move. HOW TO LOAD Add the indicator to a COIN chart. Turn on Extended Hours for best results. The default settings are already optimized and do not need to be changed. THE RIBBON (WHAT TO TRADE) The ribbon shows the overall trend. Teal ribbon = price is trending up (look for BUY setups). Red ribbon = price is trending down (look for SELL setups). Gray ribbon = no clear trend (do not trade). If the ribbon is gray, the indicator will block signals to protect you from choppy markets. BULL AND BEAR DOTS (TREND CHANGE ALERTS) Bull dot appears when the trend turns bullish. Bear dot appears when the trend turns bearish. These dots are early warnings, not entries. Always wait for a BUY or SELL arrow before taking a trade. BUY AND SELL ARROWS (WHEN TO ENTER) BUY arrows appear only when conditions strongly favor upward movement. SELL arrows appear only when conditions strongly favor downward movement. These arrows are confirmation signals. Enter only after the arrow appears. Not every move will get a signal. Fewer, higher-quality signals are intentional. OPENING BIAS (FIRST MINUTES PROTECTION) Right after the market opens, the indicator sets a directional bias. During this time, it will only allow trades in the safer direction. This helps avoid getting chopped up during the opening volatility. TAKE-PROFIT TARGETS AND STOP When a BUY or SELL arrow appears, take-profit levels automatically show on the chart: TP1, TP2, and TP3 are profit targets. STOP is where the trade is considered wrong. You can scale out at each target or exit fully at any level. Only the most recent targets are shown to keep the chart clean. SIMPLE WAY TO USE IT Check the ribbon color (teal or red). Ignore the chart if the ribbon is gray. Wait for a BUY or SELL arrow. Use the take-profit targets and stop provided. Do not chase moves without arrows. IMPORTANT NOTES This indicator does not repaint confirmed signals. It is meant to keep trading simple and disciplined. It works best during strong trend days, not sideways markets.
Pine Script® 인디케이터
webemoon의
GOLD 5m PA ScalperXAUUSD 5-Minute Price Action Scalper with HTF Confirmation This Pine Script is a trend-following scalping strategy designed specifically for XAUUSD (Gold) on the 1,3,5-minute timeframe. Its main goal is to reduce noise and false signals by combining lower-timeframe price action with higher-timeframe (15-minute) structure. CORE IDEA Trade only in the direction of the dominant trend and only when price reacts from a strong higher-timeframe Order Block.
Pine Script™ 전략
techtraderravi의
Plan Your Trade, Trade Your Plan. Levels. - by TenAMTrader📍 Plan Your Trade, Trade Your Plan. Levels. — by TenAMTrader Successful trading is rarely about predicting — it’s about preparing. "Plan Your Trade, Trade Your Plan. Levels" is designed to bridge the gap between analysis and execution by forcing clarity before the trade ever happens. Instead of reacting to price in real time, this tool encourages traders to define their plan, map their key levels, and then simply trade what they already decided. 🧠 Why Planning Matters Most trading mistakes don’t come from bad analysis — they come from abandoning a plan mid-trade. Emotions take over when levels aren’t clearly defined ahead of time. This indicator is built around a simple philosophy: Make the plan first. Trade the plan second. By writing your thesis directly into the indicator and visually anchoring it to price, you remove ambiguity and hesitation when the market starts moving. 📊 What This Indicator Does Converts your written trade plan or market outlook into clearly plotted price levels Automatically identifies: Pivot level (key decision point) Resistance levels (above pivot) Support levels (below pivot) Displays contextual notes directly on the chart so you always remember why a level matters Keeps your focus on execution, not interpretation ✍️ How to Use It Paste your daily or weekly plan into the Input your Plan/Levels box Let the script extract and plot the levels automatically Observe how price behaves around predefined zones Execute only what aligns with your original plan No guesswork. No moving targets. 🎯 Designed For Traders who value structure and discipline Futures, index, and equity traders who trade key levels Traders focused on process over prediction ⚠️ Important Disclaimer This indicator is provided for educational and informational purposes only and does not constitute financial advice, investment advice, or a recommendation to buy or sell any security, futures contract, or financial instrument. Trading involves substantial risk and is not suitable for all investors. Past performance is not indicative of future results. All trading decisions, risk management, and position sizing are the sole responsibility of the user. By using this indicator, you acknowledge that TenAMTrader assumes no liability for any losses, damages, or decisions made based on its use. Trade prepared. Trade disciplined. "Plan Your Trade, Trade Your Plan. — TenAMTrader
Pine Script® 인디케이터
TenAM_Trader의
RMI Valid FVG & IFVGRMI • Valid FVG & iFVG (Smart Money Concept) RMI • Valid FVG & iFVG is a precision-focused Fair Value Gap indicator designed for traders who follow Smart Money Concepts (SMC) / ICT logic and want to filter out low-quality, random gaps. This indicator does not plot every FVG. It highlights only structurally relevant FVGs that form in the direction of the trend and have a high probability of being filled. Core Features Bullish & Bearish Fair Value Gaps Inverse Fair Value Gaps (iFVG) Trend-aligned FVG filtering Automatic invalidation after mitigation Clean background zones for clear visibility Optimized for intraday trading Adjustable settings for scalping, intraday & swing trading Smart Filtering Logic FVGs are validated using market structure context Only FVGs that form within the active trend are displayed Weak or low-probability gaps are ignored Inverse FVGs appear after strong displacement and rejection Zones are visually faded once mitigated This helps reduce chart noise and keeps the focus on high-probability reaction zones. Best Use Cases Entry refinement after BOS / CHoCH Confluence with liquidity grabs Premium / discount zone trading Intraday & session-based trading Works well with ICT, SMC, price action & structure-based strategies Recommended Timeframes Scalping: M1 – M5 Intraday (default): M5 – M15 Swing Trading: M15 – H1 (Default settings are optimized for intraday trading.) Important Notes This is not a signal indicator No repainting No buy/sell arrows Designed as a decision-support tool, not an automated system Always combine with proper risk management and confirmation. RMI • Precision over noise. Trade structure, not randomness.
Pine Script® 인디케이터
RMI_INVEST의
AI-based Price action confluence dashboard# **AI-Based Price Action Confluence Dashboard - Publication Guide** Here's a comprehensive introduction guide for your TradingView indicator publication: *** ## **📊 TITLE** **AI-Based Price Action Confluence Dashboard** *** ## **🎯 SHORT DESCRIPTION** (For the summary field) A sophisticated real-time confluence scoring system that analyzes multiple price action signals across 15-minute timeframes, providing traders with an AI-weighted scoring mechanism (0-6 scale) to identify high-probability trade setups through visual signal panels and intelligent path detection. *** ## **📝 FULL DESCRIPTION** ### **Overview** The AI-Based Price Action Confluence Dashboard is an advanced technical indicator designed to eliminate guesswork in intraday trading by systematically scoring and displaying multiple price action signals in real-time. Unlike traditional single-indicator approaches, this dashboard employs a confluence methodology that combines multiple independent signals to provide stronger trade confirmations and reduce false signals. This indicator is specifically optimized for **1-minute chart analysis** while monitoring **15-minute price structure**, making it ideal for day traders and scalpers who need precise entry timing with larger timeframe context. *** ### **🔑 Key Features** **✅ Real-Time AI Confluence Scoring** - Dynamic scoring system (0-6 points) for both bullish and bearish setups - Visual meter display shows signal strength at a glance - Color-coded backgrounds indicate confluence levels (strong, moderate, mixed) **✅ Multi-Signal Analysis** The dashboard tracks 6 distinct signal types: 1. **FTFC (First to Finish Close)** - Base & Bonus signals 2. **Long/Short Grab** - Liquidity sweep patterns (Path A) 3. **High/Low Hold** - Extended momentum confirmation (+2 bonus) 4. **2-Up/2-Down** - Clean breakout patterns (Path B) 5. **Breakaway** - First candle gap strategies **✅ Intelligent Path Detection** - Mutually exclusive path logic prevents signal conflicts - Automatically identifies whether price is following a "sweep path" or "clean path" - Unavailable paths are clearly marked with gray indicators **✅ Visual Signal Panels** - 🟢 Green Light = Bullish signal ACTIVE - 🔴 Red Light = Bearish signal ACTIVE - 🟡 Yellow Light = Signal BUILDING (conditions partially met) - ⚪ White Light = Signal OFF - ▪️ Gray Square = Path UNAVAILABLE (mutually exclusive) **✅ Comprehensive Alert System** - 10 different alert conditions covering all major signals - Strong confluence alerts (5+ points) - Individual signal completion alerts - Customizable alert messages *** ### **📐 How It Works** #### **The Confluence Methodology** This indicator implements a sophisticated confluence trading approach where multiple independent price action signals are combined to identify high-probability setups. Each signal type contributes points to either the bullish or bearish score, with a maximum of 6 points per direction. **Scoring Breakdown:** **BULLISH SIGNALS:** - FTFC Base (15m close > previous 15m close) = +1 - FTFC Bonus (price clears 15th candle high) = +1 - **PATH A (Sweep):** Long Grab = +1, High Hold Bonus = +2 - **PATH B (Clean):** 2-Up = +1, 2-Up Bonus = +1 - Breakaway (gap above first candle) = +1 **BEARISH SIGNALS:** - FTFC Base (15m close < previous 15m close) = +1 - FTFC Bonus (price clears 15th candle low) = +1 - **PATH A (Sweep):** Short Grab = +1, Low Hold Bonus = +2 - **PATH B (Clean):** 2-Down = +1, 2-Down Bonus = +1 - Breakaway (gap below first candle) = +1 #### **Path Detection Logic** The indicator automatically determines which path the market is following: **PATH A: SWEEP PATH** - Activated when previous 15m low (bull) or high (bear) is breached - Indicates liquidity grab before reversal - Includes powerful +2 bonus for "Hold" confirmations - Mutually exclusive with Path B **PATH B: CLEAN PATH** - Activated when previous 15m low (bull) or high (bear) holds - Indicates strong directional momentum without sweep - Cleaner price action but smaller point potential - Mutually exclusive with Path A This mutual exclusivity prevents double-counting and ensures signal accuracy. *** ### **🎨 How to Use** #### **Installation** 1. Add indicator to your 1-minute chart 2. The dashboard appears as a table overlay (default: top right) 3. No additional indicators required - this is a complete system #### **Reading the Dashboard** **Top Section - Confluence Meter:** - Shows current bull/bear scores with visual dot meters - Background color changes based on confluence strength: - **Bright Green/Red** = 5+ points (strong directional bias) - **Medium Green/Red** = 3+ points (moderate bias) - **Orange** = 3+ points both sides (conflicting signals) - **Gray** = Low confluence (choppy conditions) **Signal Panels Section:** - Each row shows a signal type with bull/bear lights side-by-side - Active signals (🟢🔴) contribute to the total score - Building signals (🟡) indicate potential setups forming - Unavailable paths (▪️) show which exclusive path is blocked #### **Trading Strategy** **High-Probability Long Entries:** - Bull score ≥ 5 AND bear score ≤ 1 - Multiple green lights active in signal panels - PATH A or PATH B showing full completion - Consider entry on pullback to key 15m level **High-Probability Short Entries:** - Bear score ≥ 5 AND bull score ≤ 1 - Multiple red lights active in signal panels - PATH A or PATH B showing full completion - Consider entry on rally to key 15m level **Avoid Trading When:** - Both scores are 3+ (conflicting signals) - No path is showing active/building status - Score is below 3 on both sides (low confluence) #### **Risk Management** - Use 15m swing high/low for stop placement - Target opposing 15m level or previous session extremes - Scale out at partial targets when confluence decreases - Best results when combined with proper position sizing *** ### **⚙️ Customization** **Dashboard Settings:** - **Table Location:** Top Left, Top Right, Bottom Left, Bottom Right - **Text Size:** Tiny, Small, Normal, Large **Color Scheme:** - **Bullish Color:** Customize green for bull signals (default: #00cc66) - **Bearish Color:** Customize red for bear signals (default: #ff4444) - **Building Color:** Customize yellow for forming signals (default: #ffaa00) - **Inactive Color:** Customize gray for off signals (default: #555555) - **Unavailable Color:** Customize dark gray for blocked paths (default: #333333) All colors can be adjusted to match your chart theme or visual preferences. *** ### **🎯 Best Practices** 1. **Use on 1-minute charts only** - The indicator is calibrated for this timeframe 2. **Trade during liquid sessions** - Best results during NY/London overlap 3. **Wait for 3+ confluence** - Minimum threshold for trade consideration 4. **Watch path transitions** - Signal strength changes when paths flip 5. **Use alerts strategically** - Set alerts for 5+ confluence to catch strong setups 6. **Combine with volume** - High volume confirms signal validity 7. **Respect 15m structure** - Don't fight the larger timeframe bias *** ### **⚠️ Important Notes** - This indicator is designed for **intraday trading only** - Requires active monitoring during trading sessions - Works best on liquid instruments (major forex pairs, indices, large-cap stocks) - Not suitable for swing trading or position trading - Past performance does not guarantee future results - Always use proper risk management and position sizing *** ### **🏷️ Category** **Oscillators** or **Volatility** (choose based on TradingView categories) *** ### **🏷️ Suggested Tags** - confluence - price action - day trading - scalping - intraday - signals - dashboard - multi-timeframe - 1-minute - 15-minute *** ### **📜 Disclaimer** This indicator is a tool for technical analysis and should not be used as the sole basis for trading decisions. All trading involves risk, and you should never risk more than you can afford to lose. The developer assumes no responsibility for trading losses incurred through the use of this indicator. Always practice proper risk management and consider your own risk tolerance before trading.
Pine Script® 인디케이터
DeLeBlanc의
Liquidity Sweep + Volume + OB + EMA Cross Exit This strategy is a smart-money–inspired trading system designed to capture high-probability reversals after liquidity is taken from the market. It combines liquidity sweeps, volume confirmation, order block validation, and a dynamic EMA-based exit to control risk and let profits run. Core Concept Institutions first take liquidity, then move price in the real direction. This strategy aims to enter after liquidity is swept and price shows confirmation. 1️⃣ Liquidity Sweep Detection 2️⃣ Volume Confirmation 3️⃣ Order Block Identification 4️⃣ EMA Trend Filter (Optional Entry Bias) 5️⃣ Trade Entry Logic 6️⃣ Exit Strategy – EMA Cross Exit Benefits: Lets strong trends run Exits automatically when momentum weakens Adapts to different market conditions 🛡 Risk & Trade Management One trade at a time (anti-overtrading logic) Early exit if trade moves against position after a few bars Opposite signal forces exit EMA cross provides trend-based exit
Pine Script™ 전략
techtraderravi의
Market + Direction + Entry + Hold + Exit v1.5 FINALOverview This script is a complete trend-based trading framework designed to filter market conditions, determine directional bias, detect high-quality pullback entries, manage active trades, and identify trend-weakening exit points. It is optimized for NQ futures, Gold (XAUUSD), and Bitcoin, with adaptive parameters for each asset. The logic focuses on trading only when conditions are favorable, aligning entries with the primary trend, and avoiding low-probability setups. 1. Market Condition Filter Before any signal appears, the script checks whether the market is active using three conditions: ATR compared to ATR moving average (volatility condition) Volume compared to average volume (liquidity condition) Price distance from VWAP (suppression of mean-reversion environments) A trade environment is considered active when at least two of these three conditions are positive. 2. Trend Direction Filter Directional bias is defined by: EMA21 relative to EMA55 Price relative to VWAP Heikin-Ashi structure When these conditions align, the script switches into long-only or short-only mode. No counter-trend signals are displayed. 3. Entry Logic (L, L2, L3 and S, S2, S3) The system identifies pullback entries within a confirmed trend. Long entries require: Uptrend confirmation Price dipping toward EMA21 or EMA55 A constructive Heikin-Ashi candle Market environment active Short entries mirror the same structure in bearish conditions. Re-entries (L2, L3, S2, S3) are given only if the trend remains intact after the first entry. 4. Hold Logic A hold signal appears if momentum remains aligned with the trend. Momentum is evaluated using the Stochastic indicator (K and D lines). 5. Exit Logic An exit signal appears when: The recent structural low (for longs) or high (for shorts) is broken, and The EMA slope indicates weakening trend strength This combination identifies high-probability trend exhaustion. How to Use Add the script to your chart. Select an asset preset (NQ, GOLD, BTC). Wait for the market to be active. Follow the entry signals (L, L2, L3 or S, S2, S3). Hold signals help confirm continuation. Exit signals indicate potential trend reversal or weakness. Feature Summary Market environment filter Trend direction filter Pullback-based entry system Multi-stage re-entry framework Momentum-based hold signal Structure-based exit Asset-adaptive parameters Clean chart visualization Disclaimer This script is for research and educational use. It does not constitute financial advice. Always backtest before using in live markets. 개요 이 스크립트는 시장 상태 필터링, 추세 방향 판단, 고품질 눌림목 진입, 보유 판단, 추세 약화 기반 청산까지 모두 포함하는 완전한 트레이딩 프레임워크입니다. NQ, 골드(XAUUSD), 비트코인에 맞게 최적화되어 있습니다. 1. 시장 필터 다음 세 가지 중 두 가지 이상이 충족될 때만 매매 환경을 ‘활성’으로 판단합니다. ATR 기준 변동성 체크 거래량 활성도 체크 가격의 VWAP 거리 체크 2. 방향(추세) 필터 다음 조건을 기반으로 상승·하락 추세를 결정합니다. EMA21 vs EMA55 가격 vs VWAP Heikin-Ashi 구조 이 조건이 일치할 때만 롱 전용 또는 숏 전용 모드로 진입합니다. 3. 진입 로직 추세가 유지되는 상태에서 EMA21 또는 EMA55까지 눌림이 나올 때 L 또는 S 신호를 제공합니다. 추세가 유지되면 L2/L3, S2/S3 재진입 신호가 추가로 발생합니다. 4. 보유(Hold) 모멘텀이 추세 방향과 일치할 때 보유 신호를 제공합니다. 5. 청산(Exit) 다음 두 조건이 동시에 나타날 때 청산 신호가 표시됩니다. 직전 구조(스윙)가 붕괴될 때 EMA 기울기가 약화될 때 사용 방법 차트에 스크립트를 추가합니다. 자산 프리셋(NQ, GOLD, BTC)을 선택합니다. 시장이 활성일 때만 신호를 참고합니다. L/S 진입 신호와 보유/청산 신호를 활용해 매매 흐름을 관리합니다.
Pine Script® 인디케이터
ninnikuya2294의
Pivot Points High LowGaneshA Pivot Points High/Low indicator that: Detects swing highs (ta.pivothigh) and swing lows (ta.pivotlow) using configurable left/right bar lengths. Draws labels at the confirmed pivot points: Down labels at pivot highs (potential resistance). Up labels at pivot lows (potential support). Lets you customize text color and label fill color separately for highs and lows. It’s designed for overlay (on-price chart), with max_labels_count=500 to allow many labels.
Pine Script® 인디케이터
manojnibrad의
BTC - VDD Multiple (Approx)Overview & Philosophy ⚠️ Note: This indicator is optimized for the Daily (1D) Timeframe. Please switch your chart to 1D for accurate signal reading. The BTC – VDD Multiple (Approx) is an advanced oscillator designed to identify market overheating and cycle tops by analyzing the velocity of value moving through the market. In traditional On-Chain Analysis, Value Days Destroyed (VDD) is a premier metric for spotting macro tops. It multiplies the coin age (how long a coin was held) by the price at which it was moved. When old coins (HODLer money) move at high prices, VDD spikes, signaling massive profit-taking. The Problem: Real "Coin Days Destroyed" (CDD) data is typically locked behind institutional paywalls or unavailable on standard TradingView plans. The Solution: This script calculates a Deterministic Proxy. By analyzing the relationship between Exchange Volume, Price, and a Dormancy Constant, we can approximate the structure of the VDD Multiple without needing a premium data feed. Methodology The VDD Multiple works by comparing short-term market velocity against a long-term baseline. 1. The Proxy Calculation Since we cannot directly access the age of coins on TradingView, we model the economic weight of the move: Proxy Value = Exchange Volume * Price * Dormancy Factor This creates a synthetic representation of "Value Throughput." 2. The Multiple We compare the immediate heat of the market against the yearly trend: • Short-Term MA (2 Days): Captures flash spikes and sudden liquidity exit events. • Long-Term MA (365 Days): Represents the baseline "hum" of network activity. VDD Multiple = Short Term MA / Long Term MA How to Read the Chart The indicator plots the Multiple as a line and uses background highlighting to signal extreme regimes. 🔴 The Red Zone (Overheated > 2.9) Meaning: Current value transfer is ~3x higher than the yearly average. Interpretation: Historically, sharp spikes into the Red Zone correlate with Local or Cycle Tops. This indicates that massive volume is changing hands at high prices—typically a sign of "Smart Money" distributing into "Dumb Money" FOMO. Note: In strong bull runs, price can push higher even after a VDD spike, but the risk/reward ratio is extremely poor here. 🟢 The Green Zone (Undervalued < 0.75) Meaning: Market activity is quiet and below the yearly baseline. Interpretation: These are periods of apathy or accumulation. Historically, extended time spent in the Green Zone (the "flatline") has offered the best asymmetric buying opportunities. 🟠 The Orange Line (Neutral) Meaning: The market is in transition or equilibrium. Strategy & Context This indicator is best used as a Macro Cycle Tool, not a day-trading signal. • Exit Strategy: Look for "Clusters" of Red Spikes. A single spike often marks a local correction, but a cluster of intense spikes while price makes new highs (Divergence) is a strong Cycle Top warning. • Entry Strategy: Historically the best entries occur when the indicator flattens out in the Green Zone for weeks or months. This suggests sellers are exhausted and the market has reached a floor. Credits This script is an approximation of the original VDD Multiple concept. Full credit for the underlying on-chain theory goes to the pioneers of this metric: • Concept: The original Value Days Destroyed metric was popularized by Hans Hauge and Glassnode. • The Multiple: The specific application of a Short/Long MA Multiple on VDD is widely attributed to analysts like TXMC and Bitbo. This script adapts these concepts for the free TradingView environment using exchange volume proxies. Settings • Data Source: Defaults to BINANCE:BTCUSDT to capture high-volume liquidity. • Short MA: Default is 2 Days to capture rapid velocity spikes. • Long MA: Default is 365 Days to track the annual trend. Disclaimer This tool is an approximation based on exchange volume, not raw blockchain data. While exchange volume and on-chain volume are highly correlated during cycle extremes, they are not identical. This script is for educational and research purposes only. Past performance does not guarantee future results. Tags bitcoin, btc, onchain, vdd, cdd, valuation, cycle, top, bottom, Rob Maths
Pine Script® 인디케이터
Rob_Maths의
Candle LeverageTechnical indicator that calculates and visually displays the mathematical leverage factor of each individual candle. FORMULA: • Bullish Candle: Close ÷ (Close - Low) • Bearish Candle: Close ÷ (High - Close) VISUAL REPRESENTATION: • Green labels above bullish candles with prefix "Lx" • Red labels below bearish candles with prefix "Sx" • The displayed number represents the calculated leverage value TIME FRAME COMPATIBILITY: • Works on ALL time frames (1 minute to monthly charts) • Real-time calculation on each candle close • Consistent behavior across all chart intervals INTERPRETATION: • Higher values indicate candles with smaller shadow proportion • Lower values suggest candles with larger shadow proportion • Purely quantitative analysis of candle structure FEATURES: • Purely mathematical calculation • No predictions or trading signals • Non-intrusive chart display • Decimal places configuration available • Compatible with any trading instrument (stocks, forex, crypto, etc.) UTILITY: For objective technical analysis of candle formations across any time frame, useful when combined with other analysis tools. DISCLAIMER: This indicator is provided for educational and research purposes only. It does not constitute financial advice. Trading involves significant risk of loss.
Pine Script® 인디케이터
oDouglasAlex의
NY LONDON LUNCH AUTO**NY London Lunch Auto** is a precision session-anchor indicator designed for traders who focus on institutional timing and liquidity behavior. This script automatically marks the **high and low of three key 15-minute New York session candles**: • **3:00 AM NY** — London session expansion • **8:00 AM NY** — New York open / kill zone • **2:00 PM NY** — NY lunch / power hour transition Each time one of these candles prints on the **15-minute chart**, the script captures its exact high and low and extends them forward as horizontal levels. The levels remain **locked and unchanged** until the next key session candle appears, ensuring clean, non-repainting reference zones. ### Key Features • Works **exclusively on the 15-minute timeframe** • Automatically updates at **3AM, 8AM, and 2PM NY time** • Levels stay fixed — no drifting or recalculation • Clean, minimal design with customizable colors • Ideal for liquidity sweeps, displacement, and ICT-style execution models This indicator is built for traders who want **clarity, patience, and structure**, not clutter. It pairs seamlessly with liquidity sweep, displacement, and fair value gap strategies.
Pine Script® 인디케이터
wilsonne14의
EMA 8 / 20 / 200Created to easily use the 8/20/200 strategy. This indicator is designed to give a clear, multi-timeframe view of trend, momentum, and structure using three exponential moving averages. 1. Trend direction (EMA 200 – pink) The 200 EMA acts as the long-term trend filter. Price above the 200 EMA suggests a bullish market bias. Price below the 200 EMA suggests a bearish market bias. Many traders avoid taking trades against this higher-timeframe direction. 2. Momentum and trade bias (EMA 20 – blue) The 20 EMA reflects short-term momentum. When price respects the 20 EMA in an uptrend, pullbacks often provide continuation entries. In downtrends, the 20 EMA frequently acts as dynamic resistance. 3. Entry timing (EMA 8 – yellow) The 8 EMA is a fast reaction line used for precise timing. Crosses of the 8 EMA over the 20 EMA can signal momentum shifts. Strong trends often show price holding above (or below) the 8 EMA during impulse moves. 4. Confluence and trade filtering The indicator works best when the EMAs are aligned: Bullish alignment: EMA 8 > EMA 20 > EMA 200 Bearish alignment: EMA 8 < EMA 20 < EMA 200 Misaligned EMAs usually indicate consolidation or low-probability conditions. 5. Risk management context EMAs can act as dynamic support and resistance: Stops are often placed beyond the 20 EMA or 200 EMA depending on trade horizon. Loss of EMA structure is a warning sign that the trend may be weakening. In short, the indicator is a trend-first, momentum-second framework that helps you decide when to trade, in which direction, and when to stay out.
Pine Script® 인디케이터
Knotty0807의
8menutakeshi//@version=5 indicator("猛の掟・初動スクリーナー（完全版：8項目コメント表示）", overlay=true, max_labels_count=50) //━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ // Inputs //━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ showPanel = input.bool(true, "コメント表示") panelPos = input.string("右上", "コメント位置", options= ) lastBarOnly = input.bool(true, "最後の足だけ更新（推奨）") // EMA lenEma1 = input.int(5, "EMA 5", minval=1) lenEma2 = input.int(13, "EMA 13", minval=1) lenEma3 = input.int(26, "EMA 26", minval=1) // MACD macdFast = input.int(12, "MACD fast", minval=1) macdSlow = input.int(26, "MACD slow", minval=1) macdSig = input.int(9, "MACD signal", minval=1) // Volume volMaLen = input.int(5, "出来高平均（N日）", minval=1) volMinMul = input.float(1.3, "出来高倍率Min", step=0.1) volMaxMul = input.float(2.0, "出来高倍率Max", step=0.1) volFinalMul = input.float(1.5, "最終三点：出来高倍率（>=）", step=0.1) // Candle wickBodyMult = input.float(1.8, "下ヒゲ判定：下ヒゲ/実体 >=", step=0.1) atrLen = input.int(14, "ATR長", minval=1) bigBodyATR = input.float(1.2, "大陽線判定：実体 >= ATR×", step=0.1) // Breakout / Pullback resLookback = input.int(20, "レジスタンス：過去N日高値", minval=5) pullMinPct = input.float(5.0, "押し目Min(%)", step=0.5) pullMaxPct = input.float(15.0, "押し目Max(%)", step=0.5) retestAllowPct = input.float(1.0, "ブレイク価格の許容下抜け(%)", step=0.1) stateExpireBars = input.int(30, "ブレイク状態の期限(本数)", minval=5) //━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ // Series //━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ema5 = ta.ema(close, lenEma1) ema13 = ta.ema(close, lenEma2) ema26 = ta.ema(close, lenEma3) = ta.macd(close, macdFast, macdSlow, macdSig) volAvg = ta.sma(volume, volMaLen) volMul = volAvg == 0 ? na : (volume / volAvg) atr = ta.atr(atrLen) // Candle parts body = math.abs(close - open) upperWick = high - math.max(open, close) lowerWick = math.min(open, close) - low //━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ // 1-3: トレンド //━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ema5Up = ema5 > ema5 ema13Up = ema13 > ema13 ema26Up = ema26 > ema26 allEmaUp = ema5Up and ema13Up and ema26Up golden = (ema5 > ema13) and (ema13 > ema26) above26_2days = (close > ema26) and (close > ema26 ) //━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ // 4: MACD（ゼロライン上GC） //━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ macdZeroGC = ta.crossover(macdLine, macdSignal) and (macdLine > 0) histShrinkToUp = (macdHist > macdHist ) and (macdHist < macdHist ) // 参考表示 //━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ // 5: 出来高 //━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ volOK = not na(volMul) and (volMul >= volMinMul) and (volMul <= volMaxMul) volStrongOK = not na(volMul) and (volMul >= volFinalMul) // 最終三点用 //━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ // 6: ローソク（ピンバー/包み/大陽線） //━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ longLowerWick = (body > 0) and ((lowerWick / body) >= wickBodyMult) and (upperWick <= lowerWick * 0.6) and (close > open) bullEngulf = (close < open ) and (close > open) and (open <= close ) and (close >= open ) bigBull = (close > open) and (body >= atr * bigBodyATR) and (open < ema13) and (close > ema5) candleOK = longLowerWick or bullEngulf or bigBull //━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ // 7-8: ブレイク後押し目（押し目 -5〜15%） //━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ res = ta.highest(high, resLookback) breakout = ta.crossover(close, res) var bool inBreak = false var float breakPrice = na var int breakBar = na var float postBreakHigh = na if breakout inBreak := true breakPrice := res breakBar := bar_index postBreakHigh := high if inBreak postBreakHigh := na(postBreakHigh) ? high : math.max(postBreakHigh, high) pullPct = (inBreak and not na(postBreakHigh) and postBreakHigh != 0) ? (postBreakHigh - close) / postBreakHigh * 100.0 : na pullOK = not na(pullPct) and (pullPct >= pullMinPct) and (pullPct <= pullMaxPct) retestOK = inBreak and not na(breakPrice) and (close >= breakPrice * (1 - retestAllowPct/100.0)) breakoutPullbackOK = inBreak and retestOK and pullOK if inBreak and not na(breakBar) and (bar_index - breakBar > stateExpireBars) inBreak := false breakPrice := na breakBar := na postBreakHigh := na //━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ // 8項目チェック（1つでも欠けたら見送り） //━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ chk1 = allEmaUp chk2 = golden chk3 = above26_2days chk4 = macdZeroGC chk5 = volOK chk6 = candleOK chk7 = pullOK chk8 = breakoutPullbackOK all8 = chk1 and chk2 and chk3 and chk4 and chk5 and chk6 and chk7 and chk8 // 最終三点（ヒゲ×出来高×MACD） // ※「成立時は買い確定」の定義に合わせて、all8に加えてfinal3も必須にしている final3 = longLowerWick and volStrongOK and macdZeroGC judge = (all8 and final3) ? "判定：買い" : "判定：見送り" //━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ // コメント文字列（←txt を必ず先に定義） //━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ fMark(x) => x ? "達成" : "未達" txt = "【8項目チェック】 " + "1 EMA全上向き: " + fMark(chk1) + " " + "2 黄金隊列: " + fMark(chk2) + " " + "3 26EMA上2日: " + fMark(chk3) + " " + "4 MACDゼロ上GC: " + fMark(chk4) + " " + "5 出来高" + str.tostring(volMinMul) + "-" + str.tostring(volMaxMul) + ": " + fMark(chk5) + " " + "6 ローソク条件: " + fMark(chk6) + " " + "7 押し目-" + str.tostring(pullMinPct) + "〜" + str.tostring(pullMaxPct) + "%: " + fMark(chk7) + " " + "8 ブレイク後押し目: " + fMark(chk8) + " " + "最終三点(ヒゲ×出来高×MACD): " + (final3 ? "成立" : "未成立") + " " + judge + " " + "(参考)出来高倍率=" + (na(volMul) ? "na" : str.tostring(volMul, "#.00")) + " / 押し目率=" + (na(pullPct) ? "na" : str.tostring(pullPct, "#.0")) + "%" + " / hist転換=" + (histShrinkToUp ? "YES" : "NO") //━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ // Table（位置は if で確定。三項演算子で改行しない） //━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ var pos = position.top_right if panelPos == "右上" pos := position.top_right else if panelPos == "左上" pos := position.top_left else if panelPos == "右下" pos := position.bottom_right else pos := position.bottom_left var table t = table.new(pos, 1, 1) // 描画条件 drawNow = showPanel and (lastBarOnly ? barstate.islast : true) bg = (all8 and final3) ? color.new(color.lime, 80) : color.new(color.gray, 15) fg = color.white if drawNow table.cell(t, 0, 0, txt, text_color=fg, bgcolor=bg, text_size=size.small) else table.cell(t, 0, 0, "", text_color=fg, bgcolor=color.new(color.black, 100)) //━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ // 視覚補助 //━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ plot(ema5, color=color.new(color.yellow, 0), title="EMA5") plot(ema13, color=color.new(color.orange, 0), title="EMA13") plot(ema26, color=color.new(color.red, 0), title="EMA26") plotshape(all8 and final3, title="BUY", style=shape.triangleup, location=location.belowbar, color=color.new(color.lime, 0), size=size.tiny, text="BUY")
Pine Script® 인디케이터
morishima0ut6b의
takeshi MNO_2Step_Screener_MOU_MOUB_KAKU//@version=5 indicator("MNO_2Step_Screener_MOU_MOUB_KAKU", overlay=true, max_labels_count=500, max_lines_count=500) // ========================= // Inputs // ========================= emaSLen = input.int(5, "EMA Short (5)", minval=1) emaMLen = input.int(13, "EMA Mid (13)", minval=1) emaLLen = input.int(26, "EMA Long (26)", minval=1) macdFast = input.int(12, "MACD Fast", minval=1) macdSlow = input.int(26, "MACD Slow", minval=1) macdSignal = input.int(9, "MACD Signal", minval=1) macdZeroTh = input.float(0.2, "MOU: MACD near-zero threshold", step=0.05) volDays = input.int(5, "Volume avg (days equivalent)", minval=1) volMinRatio = input.float(1.3, "MOU: Volume ratio min", step=0.1) volStrong = input.float(1.5, "Strong volume ratio (MOU-B/KAKU)", step=0.1) volMaxRatio = input.float(3.0, "Volume ratio max (filter)", step=0.1) wickBodyMult = input.float(2.0, "Pinbar: lowerWick >= body*x", step=0.1) pivotLen = input.int(20, "Resistance lookback", minval=5) pullMinPct = input.float(5.0, "Pullback min (%)", step=0.1) pullMaxPct = input.float(15.0, "Pullback max (%)", step=0.1) breakLookbackBars = input.int(5, "Valid bars after break", minval=1) showEMA = input.bool(true, "Plot EMAs") showLabels = input.bool(true, "Show labels (猛/猛B/確)") showShapes = input.bool(true, "Show shapes (猛/猛B/確)") confirmOnClose = input.bool(true, "Signal only on bar close (recommended)") locChoice = input.string("Below", "Label location", options= ) lblLoc = locChoice == "Below" ? location.belowbar : location.abovebar // ========================= // EMA // ========================= emaS = ta.ema(close, emaSLen) emaM = ta.ema(close, emaMLen) emaL = ta.ema(close, emaLLen) plot(showEMA ? emaS : na, color=color.new(color.yellow, 0), title="EMA 5") plot(showEMA ? emaM : na, color=color.new(color.blue, 0), title="EMA 13") plot(showEMA ? emaL : na, color=color.new(color.orange, 0), title="EMA 26") emaUpS = emaS > emaS emaUpM = emaM > emaM emaUpL = emaL > emaL goldenOrder = emaS > emaM and emaM > emaL above26_2bars = close > emaL and close > emaL baseTrendOK = (emaUpS and emaUpM and emaUpL) and goldenOrder and above26_2bars // ========================= // MACD // ========================= = ta.macd(close, macdFast, macdSlow, macdSignal) macdGC = ta.crossover(macdLine, macdSig) macdUp = macdLine > macdLine macdNearZero = math.abs(macdLine) <= macdZeroTh macdGCAboveZero = macdGC and macdLine > 0 and macdSig > 0 macdMouOK = macdGC and macdNearZero and macdUp macdKakuOK = macdGCAboveZero // ========================= // Volume (days -> bars) // ========================= sec = timeframe.in_seconds(timeframe.period) barsPerDay = (sec > 0 and sec < 86400) ? math.round(86400 / sec) : 1 volLookbackBars = math.max(1, volDays * barsPerDay) volMA = ta.sma(volume, volLookbackBars) volRatio = volMA > 0 ? (volume / volMA) : na volumeMouOK = not na(volRatio) and volRatio >= volMinRatio and volRatio <= volMaxRatio volumeStrongOK = not na(volRatio) and volRatio >= volStrong and volRatio <= volMaxRatio // ========================= // Candle patterns // ========================= body = math.abs(close - open) upperWick = high - math.max(open, close) lowerWick = math.min(open, close) - low pinbar = (body > 0) and (lowerWick >= wickBodyMult * body) and (lowerWick > upperWick) and (close >= open) bullEngulf = close > open and close < open and close >= open and open <= close bigBull = close > open and open < emaM and close > emaS and (body > ta.sma(body, 20)) candleOK = pinbar or bullEngulf or bigBull // ========================= // Resistance / Pullback route // ========================= res = ta.highest(high, pivotLen) pullbackPct = res > 0 ? (res - close) / res * 100.0 : na pullbackOK = not na(pullbackPct) and pullbackPct >= pullMinPct and pullbackPct <= pullMaxPct brokeRes = ta.crossover(close, res ) barsSinceBreak = ta.barssince(brokeRes) afterBreakZone = (barsSinceBreak >= 0) and (barsSinceBreak <= breakLookbackBars) pullbackRouteOK = afterBreakZone and pullbackOK // ========================= // Signals (猛 / 猛B / 確) // ========================= mou_pullback = baseTrendOK and volumeMouOK and candleOK and macdMouOK and pullbackRouteOK mou_breakout = baseTrendOK and ta.crossover(close, res ) and volumeStrongOK and macdKakuOK cond1 = emaUpS and emaUpM and emaUpL cond2 = goldenOrder cond3 = above26_2bars cond4 = macdKakuOK cond5 = volumeMouOK cond6 = candleOK cond7 = pullbackOK cond8 = pullbackRouteOK all8 = cond1 and cond2 and cond3 and cond4 and cond5 and cond6 and cond7 and cond8 final3 = pinbar and macdKakuOK and volumeStrongOK kaku = all8 and final3 // 確優先（同一足は確だけ出す） confirmed = confirmOnClose ? barstate.isconfirmed : true sigKAKU = kaku and confirmed sigMOU = mou_pullback and not kaku and confirmed sigMOUB = mou_breakout and not kaku and confirmed // ========================= // Visualization // ========================= if showLabels and sigMOU label.new(bar_index, low, "猛", style=label.style_label_up, color=color.new(color.lime, 0), textcolor=color.black) if showLabels and sigMOUB label.new(bar_index, low, "猛B", style=label.style_label_up, color=color.new(color.green, 0), textcolor=color.black) if showLabels and sigKAKU label.new(bar_index, low, "確", style=label.style_label_up, color=color.new(color.yellow, 0), textcolor=color.black) plotshape(showShapes and sigMOU, title="MOU", style=shape.labelup, text="猛", color=color.new(color.lime, 0), textcolor=color.black, location=lblLoc, size=size.tiny) plotshape(showShapes and sigMOUB, title="MOUB", style=shape.labelup, text="猛B", color=color.new(color.green, 0), textcolor=color.black, location=lblLoc, size=size.tiny) plotshape(showShapes and sigKAKU, title="KAKU", style=shape.labelup, text="確", color=color.new(color.yellow, 0), textcolor=color.black, location=lblLoc, size=size.small) // ========================= // Alerts // ========================= alertcondition(sigMOU, title="MNO_MOU", message="MNO: 猛（押し目）") alertcondition(sigMOUB, title="MNO_MOU_BREAKOUT", message="MNO: 猛B（ブレイク）") alertcondition(sigKAKU, title="MNO_KAKU", message="MNO: 確（最終）") alertcondition(sigMOU or sigMOUB or sigKAKU, title="MNO_ALL", message="MNO: 猛/猛B/確 いずれか")
Pine Script® 인디케이터
morishima0ut6b의