지금 시작

트렌드 어낼리시스

Trend Conviction (28 Pairs)Trend Conviction is a directional confidence oscillator designed to highlight when price movement is behaving like a “clean” trend versus a choppy or contested move. It evaluates recent progression in the dominant direction and reduces the reading when price shows meaningful counter-direction pressure, helping you distinguish reliable directional conditions from unstable ones. Use it to compare trend quality over time, spot transitions from trend to range, and confirm whether momentum is supported or being resisted. This version plots Trend Conviction across the full set of 28 major FX pairs in a single panel, with each pair shown as its own coloured line with right-edge labels for quick identification.
Pine Script® 인디케이터
DarkData_Official의
Multi-Indicator Dashboard# Multi-Indicator Dashboard v3.7 ## What Makes This Script Original? This dashboard is **not a simple indicator mashup**. It implements a **unique multi-layer decision system** that combines three distinct methodologies into a unified framework: 1. **Ehlers' Laguerre Mathematics** - 18 weighted Laguerre filters with consensus voting 2. **Minervini's Trend Template** - Structural trend analysis using SMA relationships 3. **Defensive Voting System** - A 7-jury protection mechanism to prevent false signals The key innovation is the **layered signal override architecture**: each layer can downgrade (but never upgrade) signals from the previous layer, creating a "safety net" that catches bull traps and false breakouts. --- ## How It Works: The 5-Layer Protection System ### Layer 1: Laguerre Consensus (Signal Generation) The script calculates 18 Laguerre filters with gamma values from 0.10 to 0.95. Each filter "votes" bullish or bearish based on: - Price position relative to filter - Filter direction (rising/falling) Votes are weighted by gamma (slower filters = higher weight). The **Effective Consensus** percentage determines the base signal strength. ### Layer 2: Market Filter (Macro Protection) ``` IF Reference Index (SPY/QQQ) < 200-day SMA THEN Market = Bearish → Block ENTER signals ``` This prevents new entries during bear markets, regardless of individual stock strength. ### Layer 3: Regime Filter (Market Condition) The script detects three market regimes using 7 criteria: - ADX level (trend strength) - DI+ vs DI- spread - RSI position - SMA convergence - Volatility contraction - Laguerre spread **Choppy or Sideways regime** → Downgrade TREND/ENTER to CAUTION ### Layer 4: Protection Score (7-Jury System) Seven independent "juries" vote on structural health: | Jury | Condition | Meaning | |------|-----------|---------| | Laguerre | Close < Lag01 | Fast support broken | | MACD | Histogram < 0 | Momentum negative | | OBV | Trend = -1 | Volume selling | | SMA20 | Close < SMA20 | Short-term trend broken | | EMA Structure | EMA10 < SMA20 | Trend structure damaged | | RS Line | RS < RS SMA50 | Underperforming index | | Net Momentum | RSC < 50 | Sellers stronger than buyers | **Scoring:** - 0-1 points: Normal - 2 points: Yellow Alert (TREND → WAIT) - 3+ points: Red Alert (→ CAUTION) ### Layer 5: RSI Divergence Alert (Visual Warning) When price approaches a 60-day high but RSI is 5+ points lower than at the previous peak, a warning icon (⚠️) appears. This **does not change signals** - it's informational only. --- ## Signal Interpretation | Signal | Code | Meaning | Action | |--------|------|---------|--------| | 🟢 ENTER | 5 | Strong setup, all layers confirm | Consider entry | | 🟢 TREND | 4 | Trend continues, structure intact | Hold position | | 🟠 CAUTION | 3 | Warning signs present | Avoid new entries | | 🟡 WATCH | 2 | Developing, too early | Monitor closely | | ⚪ WAIT | 1 | Conditions unfavorable | Stay in cash | --- ## Key Indicators Explained ### RSC (Relative Strength of Change) ``` RSC = Sum of Positive Changes / Total Changes × 100 ``` - RSC > 50: Buyers creating larger moves - RSC < 50: Sellers creating larger moves ### Effective Consensus Weighted average of 18 Laguerre filter votes. Higher gamma filters (slower, more reliable) have 2x weight compared to fast filters. ### LaRSI (Laguerre RSI) Ehlers' smoothed RSI variant. Key zones: - Below 0.20: Oversold (potential bottom) - 0.30-0.55: Pullback zone (entry opportunity if turning up) - Above 0.80: Overbought (caution) --- ## How to Use 1. **Check FINAL SIGNAL** - This is the output after all 5 layers process 2. **Read Status Row** - Shows which filter is currently active (if any) 3. **Monitor RSI Alert** - Orange color with ⚠️ means divergence detected 4. **Use Data Window** - Right-click chart → Data Window for all raw values ### Settings - **Reference Index**: SPY for US stocks, BTCUSD for crypto - **RS Lookback**: Period for relative strength calculation (default 50) - **Filters can be toggled** on/off based on your strategy --- ## Important Disclaimers - This indicator does not guarantee profits - Past performance ≠ future results - ENTER signal ≠ "buy immediately" - always confirm with your own analysis - Risk management remains your responsibility --- ## Credits & Methodology Sources - **Laguerre Filters**: John Ehlers, "Cybernetic Analysis for Stocks and Futures" - **Trend Template**: Mark Minervini, "Trade Like a Stock Market Wizard" - **CANSLIM**: William O'Neil, "How to Make Money in Stocks" ---
Pine Script® 인디케이터
mustafaaydinol의
2
Mean Deviation Loop | Lyro RSThe MAD Bollinger Bands + Loops is a sophisticated technical analysis tool designed to identify and quantify market trends by combining dynamic moving averages with robust statistical dispersion measures. This indicator employs a multi-model approach, integrating Bollinger-style MAD bands, for-loop momentum scoring, and a hybrid signal system to provide traders with adaptive insights across varying market conditions. Indicator Modes Bollinger-Style MAD Bands This mode calculates dynamic volatility bands around price using Mean Absolute Deviation (MAD) instead of standard deviation or RMSE. MAD offers a smoother and more outlier-resistant measure of price dispersion. Upper Band = Dynamic Moving Average + (MAD × Multiplier) Lower Band = Dynamic Moving Average − (MAD × Multiplier) These bands expand and contract with market volatility, helping to identify potential breakout and breakdown zones with reduced sensitivity to extreme price spikes. For-Loop Momentum Scoring Momentum is evaluated by analyzing recent price behavior through a loop-based comparison system applied to a MAD-weighted price series. A rising momentum score indicates strengthening bullish pressure A declining momentum score signals increasing bearish dominance This method emphasizes directional consistency rather than short-term noise. Hybrid Combined Signal This mode combines the outputs of the MAD Bands and For-Loop Momentum Scoring into a unified directional signal. +1 indicates bullish conditions (green) −1 indicates bearish conditions (red) An average of these scores is calculated to generate a combined signal, providing a clearer and more reliable indication of overall market trend. Practical Application Signal Interpretation A buy signal is generated when both the MAD Bands and For-Loop Momentum align bullishly. A sell signal is generated when both components align bearishly. Trend Confirmation The Hybrid Combined Signal serves as a confirmation layer, helping traders validate trend direction and reduce the likelihood of false signals during choppy or low-volatility conditions. ⚠️ Disclaimer This indicator is a technical analysis tool and does not guarantee results. It should be used in conjunction with additional analysis methods and proper risk management strategies. The creators of this indicator are not responsible for any financial decisions made based on its signals.
Pine Script® 인디케이터
LyroRS의
14
Dual MA Trendline with Angle Lock"Dual MA Trendline with Angle Lock + Multiplier Bands" is a trend-following overlay indicator that combines two moving averages (MAs), each with a special "angle lock" mechanism. Key mechanics: Instead of plotting the raw MA directly as the main trend line, it creates a piecewise-linear trendline for each MA. The trendline locks its slope (angle) and starting value whenever the MA's recent slope changes significantly (more than the user-defined angleThreshold). Between these "slope reset" points, the trendline continues with constant slope (straight line segments), producing flatter, more persistent trend representations than a curving MA. Around the locked trendline, it draws symmetric bands:Base band (1×) — always shown Optional multiplier bands (2×, 4×, 8×) — configurable Bands can be in percentage (volatility-adaptive) or fixed points (useful for forex/crypto with small price units or tick-based instruments). It also plots fills between the two MAs' bands/trendlines → visually highlights:Upper zone (greenish fill) Middle zone (blueish fill) Lower zone (reddish fill) In short: two independent "locked-angle trend ribbons" with multiplier deviation bands + inter-ribbon fills. Main Use Cases Trend direction & strength visualization The locked-slope trendlines stay straighter and change direction less frequently than normal MAs → clearer visual read of the prevailing trend (especially useful on noisy charts). Dynamic support/resistance zones 1× bands act as near-term dynamic S/R. 2× / 4× / 8× bands serve as progressively stronger support/resistance or "overextended" levels. → Many traders watch for price rejection, bounces, or acceleration once price reaches 2×–4× bands. Mean-reversion / pullback entries (especially in ranging or mildly trending markets) Price touching or exceeding outer multiplier bands + returning toward the trendline often signals good mean-reversion setups. Trend-continuation / breakout filtering Price riding above the upper bands in uptrend → strong momentum continuation. Price breaking and closing outside 4×–8× bands → potential acceleration or trend exhaustion signal. Dual-timeframe / dual-speed MA comparison MA 1 is usually longer/slower (default 128), MA 2 is shorter/faster (default 14). The fills between them act like a "trend tunnel" — wide middle fill = strong trend, narrowing = consolidation, color changes = possible reversal. Clean chart alternative to channels / regression / envelopes The angle-locking creates straighter, less whipsaw-prone lines than typical Bollinger Bands, Keltner Channels, or regression channels, while still adapting to price. Typical settings example MA1: longer period (50–200), small angle threshold → persistent major trend MA2: shorter period (9–34), larger angle threshold → more responsive minor trend Use percentage bands on stocks/indices, fixed points on forex/crypto with small pip values. Overall → very popular style among traders who like clean, low-repaint trend + deviation band systems (similar spirit to SuperTrend + envelopes, but with custom slope-locking logic).
Pine Script® 인디케이터
surfchaser의
EMA VWAP Pro StrategyEMA VWAP Pro Strategy - Quick Summary What it does: Generates CALL/PUT signals for day trading (designed for SPY options on 1-5 min charts) Entry Criteria: EMA 9 crosses above EMA 20 → CALL EMA 9 crosses below EMA 20 → PUT Must be confirmed by VWAP (price above for calls, below for puts) Requires elevated volume (1.2x average) Needs 3 candles of confirmation Optional: 15-min timeframe must agree Time Filters: Trades: 10am-12pm ET & 3-3:45pm ET only Avoids: First 15 min after open & lunch hours Quality Score (1-5 stars): Higher score = stronger setup Only shows signals rated 3+ stars 4-5 star signals highlighted as "strong" Best for: Scalping SPY 0DTE options during high-probability windows with multiple confirmations.
Pine Script® 인디케이터
imshaikh009의
Trade TrackerThis indicator is a lightweight trade P/L monitor that takes a manual entry price, direction (long/short), position size, and a configurable dollar value per point/tick. It computes real-time profit/loss by comparing the current close to the entry price, converting the move into points and then dollars based on your size and tick value. On the last bar, it draws an entry line at the specified price and renders a stacked label at that level showing Buy/Sell, size, dollar P/L (green/red), and the point P/L. It continuously deletes and redraws the line/labels to keep the chart clean, and it also plots the entry price so the value is visible in the data window and price scale.
Pine Script® 인디케이터
gggoaaat의
Z-Score STDEMA BandsZ-Score STDEMA Bands is a mean-reversion and regime-strength indicator built on normalized price deviation. The indicator converts price into a Z-Score, measuring how many standard deviations the current price is from its moving average over a configurable lookback. This makes signals comparable across assets and timeframes. On top of the Z-Score, the script applies an EMA of the Z-Score and dynamically builds upper and lower STDEMA bands using the rolling standard deviation of the Z-Score itself. These bands adapt to volatility in deviation, not price. How to read it: Z-Score (orange line): Distance from mean in standard deviations. Horizontal levels (±1, ±2, ±3): Statistical extremes and mean-reversion zones. Green/Red bands: EMA-based dynamic deviation envelopes. Blue bars: Strong positive deviation (bullish expansion beyond statistical expectation). Yellow bars: Strong negative deviation (bearish expansion beyond statistical expectation). Use cases: Identify overextended price conditions in a normalized framework. Detect trend strength vs. mean-reversion (expansion outside bands). Filter trades by statistical significance, not raw price movement.
Pine Script® 인디케이터
TiagoTF의
AI-Enhanced MSS HunterAI-Enhanced MSS Hunter This indicator is a hybrid trading system that merges Mechanical Price Action (ICT Concepts) with Statistical Machine Learning (K-Nearest Neighbors). It is designed to assist traders in identifying high-probability reversals after liquidity sweeps, as well as trend-continuation entries during specific "Kill Zone" sessions. How It Works The script operates on a strict 3-step validation process to filter out false signals during choppy market conditions. 1. Liquidity Sweep (The Trigger) The system automatically plots the Previous Day High (PDH) and Previous Day Low (PDL). The logic begins only when price "sweeps" (breaks) one of these key levels. State Persistence: Once a level is swept, the system remembers this event for the remainder of the session (or until a signal fires), waiting for the market to reverse. 2. Market Structure Shift (The Setup) After a sweep, the indicator hunts for a Market Structure Shift (MSS). It tracks dynamic Swing Highs and Swing Lows. A signal is prepared only if price breaks a recent structural swing point in the opposite direction of the sweep (e.g., Sweep PDL -> Break Swing High). 3. AI / Machine Learning Filter (The Confirmation) To reduce false positives, the signal must be confirmed by a K-Nearest Neighbors (KNN) algorithm. The Logic: The script analyzes the current values of RSI (14), CCI (14), and ROC (10). The Comparison: It looks back at the last ~1,000 bars of history to find similar market conditions (neighbors). The Prediction: If the majority of those historical "neighbors" resulted in a favorable move, the AI confirms the trade. If historical data suggests chop or reversal, the signal is blocked. Key Features 🎯 Primary Reversal Signals (Circles) Green Circle: Price swept PDL + Bullish MSS + AI Confirmation. Red Circle: Price swept PDH + Bearish MSS + AI Confirmation. ♻️ Golden Zone Re-Entries (Triangles) Once a Primary Signal is active, the script tracks the new trend leg. It automatically draws a dynamic Golden Zone (0.5 – 0.618 Fibonacci Retracement). If price pulls back into this zone and forms a new MSS, a Re-Entry Triangle is plotted. Invalidation: If the pullback breaks the original setup's low/high, the zone is removed to prevent bad trades. ⏰ Kill Zone Time Filters Signals are filtered by time to ensure you are trading during high-volume sessions. Default AM Session: 08:30 – 10:00 (New York Time) Default PM Session: 14:00 – 15:00 (New York Time) Fully customizable in settings. Settings Guide Key Levels: Toggle PDH/PDL lines and customize colors. Kill Zones: Enable/Disable time filtering and highlight background colors. AI Settings: K-Nearest Neighbors (k): Number of historical neighbors to compare (Default: 5). Training Window: How far back the AI looks for patterns (Default: 1000 bars). Visuals: Turn on/off the Golden Zone fib clouds or text labels. Disclaimer This tool is for educational purposes only. The "AI" component is a statistical classification algorithm based on historical momentum and does not guarantee future results. Always manage risk and use this indicator as part of a comprehensive trading plan.
Pine Script® 인디케이터
DivergentTrades의
P/E Ratio (TTM)This indicator plots the trailing P/E ratio (TTM) using GAAP EPS (TTM) sourced directly from TradingView’s fundamental data. It includes valuation‑zone color coding, yearly labels, and a clean, compressed visual layout suitable for most equities. The goal is to provide a fast, intuitive view of how expensive or cheap a stock is relative to its historical earnings power. Note: The indicator caps P/E values around 120 for visual clarity. Negative P/E ratios are intentionally excluded, since P/E is undefined when EPS is negative. You can adjust the cap or remove it entirely if you prefer a full‑range view. This tool is especially useful for identifying periods when a company is trading at historically elevated or discounted valuation levels.
Pine Script® 인디케이터
followmytradingjournal의
Evil MACD Trading System (Pine Script v6)Indicator Overview The Evil MACD Trading System is an enhanced version of the classic MACD indicator, optimized for TradingView with Pine Script v6. It integrates trend filtering, volume confirmation, and precision signal positioning to reduce false signals and improve trading decision accuracy—distinguishing itself from the traditional 12/26/9 MACD by focusing on trend-aligned entries and exits. Core Logic & Features 1. Enhanced MACD Calculation Departing from the standard MACD parameters, this system uses customizable fast (default:14), slow (default:28), and signal (default:8) periods to adapt to different market volatility and asset types (stocks, futures, cryptos). The core DIF, DEA, and histogram are retained while optimized for better sensitivity to medium-term trends. 2. Trend Filtering Mechanism A 60-period EMA (adjustable) acts as the primary trend filter, ensuring buy signals only trigger in uptrends (price above EMA) and sell signals in downtrends (price below EMA). This avoids counter-trend trades and minimizes exposure to sideways market noise. 3. Volume Confirmation (Toggleable) The optional volume filter validates signals by requiring trading volume to exceed 120% of the 20-period average volume. This ensures entries/exits are supported by capital flow, reducing false breakouts/breakdowns. 4. Precision Signal Positioning Signals are overlaid directly on the price chart (not the subwindow) for intuitive price correlation. Buy signals (green upward triangles + "Buy" label) attach to the bottom of candlesticks, while sell signals (red downward triangles + "Sell" label) align with candlestick highs—adjustable offset parameters let users fine-tune signal proximity to price. Usage Guidelines - Buy Signal: Triggered when DIF crosses above DEA, price stays above the 60-period EMA, and volume (if enabled) meets the 120% threshold. - Sell Signal: Triggered when DIF crosses below DEA, price stays below the 60-period EMA, and volume (if enabled) meets the 120% threshold. - Customization: Adjust MACD periods, trend filter length, volume sensitivity, and signal offset to match your trading style (scalping, swing trading) and target assets. Compatibility & Notes Built for Pine Script v6 (latest TradingView version) with no syntax errors. The indicator supports all timeframes and asset classes. For best results, combine with additional technical tools (support/resistance, RSI) for multi-factor confirmation. Disable the volume filter in low-liquidity markets to avoid missing valid signals.
Pine Script® 인디케이터
daves723의
x5-smooth-ema[t90]Overview The x5 Smoothed EMA Flow is a trend-visualization tool designed to filter out market "noise" by applying a secondary smoothing layer to a base Exponential Moving Average (EMA). How to Use Trend Filtering: The "Flow" helps identify the true trend. When the ribbon is expanding and colored for a bullish trend, it signals strong, sustained momentum. Noise Reduction: Unlike a standard EMA which can "whipsaw" during consolidation, the double-smoothed layers stay smoother for longer, helping traders stay in a position during minor pullbacks. Trend Confirmation: Use the alignment of all smoothing layers to confirm a trend. When all layers transition to the same color, it indicates a high-probability trend shift. Dynamic Support/Resistance: The ribbon acts as a depth-based support or resistance zone. Price often reacts to the "core" of the flow before continuing its primary move. Settings Source: Choose the price source (Close, HL2, etc.) for the initial calculation. Base Length: Adjust the sensitivity. Shorter lengths are better for scalping; longer lengths are optimized for swing trading. Color Settings: Fully customizable Bull and Bear colors to match your chart theme. Disclaimer: This indicator is for educational purposes only. Moving averages are lagging indicators and should be used in conjunction with other forms of analysis. Past performance is not indicative of future results.
Pine Script® 인디케이터
traderninezero의
London Breakout Optimized PFBest Practices: Only take trades in trend and above/below VWAP Avoid trading in low-volume or sideways markets Use it for intraday 5-min charts (15-min for trend confirmation) Track trades in a Trading Journal → improves discipline Entry Rules: Long (Buy): Price above EMA21 & VWAP → bullish trend EMA slope positive → strong trend confirmation Pullback to entry zone OR breakout above resistance Volume above 1.3× average → avoids weak moves Short (Sell): Price below EMA21 & VWAP → bearish trend EMA slope negative → strong downtrend Pullback to entry zone OR breakout below support Volume above 1.3× average Exit Rules: Stop-Loss: ATR-based, dynamic (tight for fewer losses) Take Profit: Risk × 3 (3:1 R:R) Automatically handled by the strategy (strategy.exit)
Pine Script™ 전략
RamonBosch072의
Median TR SuperTrend | RakoQuantMedian TR SuperTrend | RakoQuant A Robust Trend-Following Regime Indicator for Daily Crypto Markets The Median TR SuperTrend is a modern trend-following indicator designed to help students and traders clearly identify the dominant market regime on higher timeframes (especially 1D crypto). This tool is inspired by the classic SuperTrend framework, but enhanced with a more robust volatility engine, making it better suited for the extreme wick behavior and noise typical in cryptocurrency markets. What This Indicator Does: The Median TR SuperTrend answers one simple question: Are we currently in a bullish trend regime or a bearish trend regime? It is not meant for rapid scalping or frequent signals. Instead, it is built to provide: Clear directional context Trend continuation bias Regime-based positioning Noise reduction on higher timeframes This makes it ideal for students learning disciplined trend-following. Core Concept: Trend Following, Not Prediction This indicator does not attempt to predict tops or bottoms. It follows trends by reacting only when price establishes a true breakout beyond a volatility-adjusted band. That means: Strong trends are captured early Choppy markets are filtered Signals are based on regime shifts, not candle-to-candle noise What Makes It “Robust”? Traditional SuperTrend systems use ATR (Average True Range) to define volatility. Crypto markets, however, often produce outlier candles (wicks, liquidations, spikes) that distort ATR. This version replaces ATR with: Median True Range (MTR) Median TR is more resistant to extreme one-off candles, providing: Smoother volatility estimates More stable trend bands Less sensitivity to random spikes This creates a more reliable trend structure in high-volatility environments. How It Works (Simple Breakdown) 1. Median Baseline The indicator begins by calculating a rolling median of price, forming a stable central trend reference. 2. Robust Volatility Bands A volatility envelope is created using Median True Range: Upper band = baseline + multiplier × MTR Lower band = baseline − multiplier × MTR 3. SuperTrend Regime Logic Only one band is active at a time: Bull regime → trailing lower band Bear regime → trailing upper band Trend flips occur only when price breaks beyond the active band. Visual Interpretation Neon Aqua Band Bullish regime Trend-following long environment Neon Magenta Band Bearish regime Defensive or short environment Filled Trend Zone Shows the active trend space clearly without clutter. This indicator is designed for learning: Market structure Regime trading Patience and higher timeframe discipline Recommended workflow: Use Median TR SuperTrend on 1D Trade only in the direction of the active regime Combine with a trigger tool if needed (RSI, momentum, breakout) Ideal Markets BTC, ETH, SOL Daily swing trend environments Portfolio regime filtering (RSPS / LTPI-style frameworks) Disclaimer This indicator is a regime and trend-following tool, not a complete trading system. It should be used as part of a broader strategy with: Risk management Position sizing Confirmation logic
Pine Script® 인디케이터
RakoQuant의
7
Larry Williams Qualified Trend Break Signals [tradeviZion]Larry Williams Qualified Trend Break Signals - Description 📖 Introduction Welcome to the Larry Williams Qualified Trend Break Signals indicator. This description explains how the indicator works, its settings, and how to use it. This indicator demonstrates Larry Williams' Qualified Trend Line Break technique - his preferred method for timing precise entries on daily charts when you already have a confirmed market setup. --- 🎯 About This Script This indicator implements the Qualified Trend Line Break system - an entry technique that qualifies trend line breaks for better timing. Important: This is NOT a signal generator. It's an entry timing tool for traders who already have a market setup and confirmation. Use it only after establishing weekly bias and daily confirmation. Why We Made This Indicator: This indicator demonstrates Larry Williams' favorite entry technique for daily timeframe trading. It's designed to be used as part of his complete methodology: How To Use It Properly: First, establish your setup: Check weekly chart for overall market bias (bullish/bearish) Then confirm on daily: Look for confirmation signals on daily timeframe Finally, use trend breaks: Enter trades only when trend breaks align with your setup direction Important Warning: This is NOT a standalone buy/sell signal indicator. Using trend breaks without proper setup and confirmation will likely produce poor results. It's a timing tool for entries, not a signal generator. --- About The Qualification Rules The system improves on qualification methodology with these key changes: For BUY signals (breaking above downtrend lines): Break is usually bad if previous bar closed higher But can still be good if: Previous bar was inside the prior bar AND that prior bar closed lower Price gaps above trend line and moves up at least one tick Previous bar closed below its own opening price For SELL signals (breaking below uptrend lines): Break is usually bad if previous bar closed lower But can still be good if: Previous bar was inside the prior bar AND that prior bar closed higher Price gaps below trend line and moves down at least one tick Previous bar closed above its own opening price --- 📐 How The Qualification System Works The trend break system is based on qualification methodology as developed by Larry Williams . It solves the problem where trend line breaks often fail and price goes back. Trend Line Setup: For BUY signals: Connect the two most recent declining swing highs to make a downtrend line For SELL signals: Connect the two most recent rising swing lows to make an uptrend line Inside Bar Rule: A key principle: Trend breaks that occur on inside bars are completely ignored. The system only evaluates breaks that occur on regular bars, making signals more reliable. How It Works In The Code The indicator follows these steps: Finds swing points: Identifies highs and lows in the price action Draws trend lines: Connects 2 recent swing points to make trend lines Checks inside bars: Ignores breaks that happen on inside bars Qualifies signals: Uses the rules to check if breaks are good or bad Shows signals: Only displays qualified BUY/SELL signals Optional feature: Can show disqualified signals ⚙️ Settings The indicator has 3 groups of settings to customize how it works. --- 📊 Signal Settings Show Signals Default: ON ON: Displays green/red labels when trend breaks qualify for entry OFF: Hides entry labels (trend lines still show for analysis) Remember: These are entry TIMING signals, not standalone buy/sell signals Signal Selection Default: Both | Options: Buy Only, Sell Only, Both Buy Only: Shows only BUY signals Sell Only: Shows only SELL signals Both: Shows both BUY and SELL signals Break Validation Default: Close | Options: Break Level, Close Break Level: Signal when price touches the trend line (more signals) Close: Signal when bar closes beyond trend line (fewer signals) Tip: Try "Close" first for better signals Show Disqualified Default: OFF | Options: ON/OFF What it does: Shows bad breaks ON: Shows gray ❌ labels with explanations OFF: Hides bad signals 👁️ Display Settings Show Trend Lines Default: ON What it does: Shows trend lines on the chart Looks like: Dashed blue lines connecting swing points Goes to: Extends into future bars Why: Shows where breakouts are expected Show Swing Points Default: ON What it does: Marks highs/lows used for trend lines Looks like: Shape markers at swing locations Shows: How trend lines are constructed Marker Style Default: Circle | Options: Circle, Triangle, Square, Diamond, Cross What it does: Choose shape for swing markers Options: Circle, Triangle, Square, Diamond, Cross Best choice: Circle is clear without being busy Marker Size Default: 3 | Range: 1-10 What it does: Controls marker size Range: 1 (tiny) to 10 (large) Show Inside Bars Default: ON What it does: Highlights inside bars Looks like: Light orange background on inside bars Note: These bars are ignored for break qualification Important: Inside bars are ignored for break qualification 🎨 Colors Signal Colors Buy Signal (Default: Green) - Color for good BUY signals Sell Signal (Default: Red) - Color for good SELL signals Disqualified (Default: Gray) - Color for bad signals Display Colors Trend Line (Default: Blue) - Color for trend lines and markers Inside Bar (Default: Light Orange) - Background for inside bars 💡 How To Use It In Larry Williams Methodology Step 1 - Weekly Setup: Identify market bias on weekly chart (clear bullish/bearish trend) Step 2 - Daily Confirmation: Find confirmation signals on daily timeframe Step 3 - Trend Break Entry: Use qualified trend breaks only in setup direction Important: Never enter based on trend breaks alone - always require setup + confirmation first ⚠️ Important Notice This indicator implements Larry Williams' trend break entry technique. It should NOT be used as standalone buy/sell signals. Only use trend breaks for entry timing after you have established a proper market setup and confirmation. Poor results will occur if using signals without the complete Larry Williams methodology. Credits: Based on Larry Williams' trading approach and qualification methodology. Swing detection logic adapted from "Larry Williams: Market Structure" by Smollet.
Pine Script® 인디케이터
TradeVizion의
4
Pro RSI Mean-Deviation Sigmoid Oscillator (Z-Score Normalized)# Pro RSI Mean-Deviation Sigmoid Oscillator (Z-Score Normalized) ## 🧮 Core Mathematical Concept **The Key Formula**: This indicator subtracts RSI's own EMA from the RSI value, divides the result by its standard deviation to create a Z-score, then applies sigmoid normalization to map it into a 0-1 range (displayed as 0-100). **In Simple Terms**: ``` Z-Score = (RSI - RSI_EMA) / Standard_Deviation Sigmoid = 1 / (1 + e^(-k × Z-Score)) Final Output = Sigmoid × 100 ``` This mathematical approach transforms raw RSI momentum into a statistically normalized oscillator that better identifies genuine trend changes while filtering out noise. --- ## 📊 What This Indicator Does This advanced momentum oscillator combines RSI analysis with statistical normalization to identify overbought/oversold conditions and momentum shifts with greater precision than traditional RSI alone. **Core Innovation**: Uses Z-score normalization and sigmoid transformation to convert RSI deviations into a smooth 0-100 scale, reducing noise while maintaining sensitivity to genuine market movements. --- ## 🔧 How It Works ### 1. **RSI Foundation** - Calculates standard RSI over your chosen period (default: 14) - Applies an EMA smoothing line to identify the RSI trend ### 2. **Statistical Normalization** - Measures deviation between RSI and its EMA - Calculates Z-score (standard deviations from mean) - Normalizes extreme values while preserving relative strength ### 3. **Sigmoid Transformation** - Maps Z-scores to a 0-100 scale using sigmoid function - Creates smooth transitions between bullish/bearish zones - Reduces false signals from RSI whipsaws ### 4. **RSI Bollinger Bands** - Adds dynamic overbought/oversold bands around RSI - Adapts to market volatility automatically - Confirms extreme conditions when RSI breaches bands ### 5. **Momentum Histogram** - Visualizes rate of change in normalized momentum - Green bars = strengthening bullish momentum - Red bars = strengthening bearish momentum --- ## 📈 How to Use ### **Primary Signals** **Sigmoid Oscillator (Thick Line)** - **Above 50** = Bullish momentum dominant - **Below 50** = Bearish momentum dominant - **Crossing 50** = Potential trend change **Extreme Zones** - **Above 70** = Overbought (green background) - Consider taking profits or preparing for reversal - **Below 30** = Oversold (red background) - Watch for potential bounce or reversal ### **Confirmation Signals** **RSI Bollinger Band Breaches** (Purple background) - RSI above upper band = Extremely overbought - RSI below lower band = Extremely oversold - Strong confirmation when paired with sigmoid extremes **RSI vs RSI EMA Crossovers** - Purple line (RSI) crossing above orange line (EMA) = Early bullish signal - Purple line crossing below orange line = Early bearish signal **Momentum Histogram** - Growing green bars = Accelerating bullish momentum - Growing red bars = Accelerating bearish momentum - Shrinking bars = Momentum weakening (potential reversal warning) --- ## ⚙️ Parameter Settings ### **RSI Period** (Default: 14) - Lower (7-10) = More responsive, more signals - Higher (20-30) = Smoother, fewer false signals - Recommended: Keep at 14 for most timeframes ### **RSI EMA Period** (Default: 14) - Controls smoothness of RSI trend line - Match to RSI period for standard behavior - Increase for longer-term trend identification ### **Standard Deviation Period** (Default: 20) - Lookback window for Z-score calculation - Lower = More sensitive to recent changes - Higher = More stable, slower to react ### **Sigmoid Sensitivity (k)** (Default: 1.0) - **0.5-0.8** = Smoother, less extreme readings - **1.0-1.5** = Balanced sensitivity - **2.0+** = More aggressive, reaches extremes faster - Adjust based on asset volatility ### **Bollinger Band Multiplier** (Default: 2.0) - Standard deviation multiplier for RSI bands - **1.5** = Tighter bands, more frequent signals - **2.5-3.0** = Wider bands, only extreme moves --- ## 💡 Trading Strategies ### **Strategy 1: Momentum Continuation** 1. Wait for sigmoid to break and hold above 70 (bullish) or below 30 (bearish) 2. Confirm with growing momentum histogram in same direction 3. Enter in direction of momentum when RSI breaks Bollinger bands 4. Ride the trend until sigmoid crosses back through 50 or momentum histogram shrinks 5. This indicator excels at catching strong, sustainable momentum moves ### **Strategy 2: Momentum Breakout** 1. Identify sigmoid consolidation near 50 2. Watch for strong break above 70 or below 30 3. Confirm with growing momentum histogram 4. Enter in direction of break, exit when momentum weakens ### **Strategy 3: Divergence Detection** 1. Compare price action to sigmoid oscillator 2. Bullish divergence: Price makes lower low, sigmoid makes higher low 3. Bearish divergence: Price makes higher high, sigmoid makes lower high 4. Enter when sigmoid confirms with 50-line cross ### **Strategy 4: Multi-Timeframe Confluence** 1. Use on higher timeframe (4H/Daily) for trend direction 2. Use on lower timeframe (15M/1H) for entry timing 3. Only take trades when both timeframes align 4. Increases win rate significantly --- ## ⚠️ What to Watch For ### **Best Conditions** - ✅ Trending markets with clear momentum - ✅ Assets with decent volatility (not too choppy) - ✅ When multiple signals align (sigmoid + bands + histogram) - ✅ Confirmed with price action or volume ### **Difficult Conditions** - ❌ Sideways, choppy markets (generates false signals) - ❌ Low volatility periods (sigmoid may not reach extremes) - ❌ Major news events (can cause extreme whipsaws) - ❌ Very low timeframes (<5min) - too much noise ### **Common Pitfalls** - Don't trade sigmoid extremes blindly - wait for reversal confirmation - Don't ignore the momentum histogram - it shows strength of moves - Don't use in isolation - combine with support/resistance, volume, etc. - Don't over-optimize parameters - default settings work well for most assets --- ## 📋 Risk Disclaimers **IMPORTANT:** This indicator is for educational purposes only and is NOT financial advice. All trading involves substantial risk of loss. Past performance does not guarantee future results. Always use proper risk management, backtest thoroughly, and consult a licensed financial advisor before making trading decisions. The creator assumes no liability for your trading results. **Trade at your own risk.** --- ## 🔍 Additional Considerations ### **Combine With:** - Support and resistance levels - Volume analysis - Trend indicators (moving averages) - Price action patterns - Market structure analysis ### **Timeframe Recommendations:** - **Scalping (1-5min)**: Lower RSI period (7-10), higher sigmoid sensitivity - **Day Trading (15min-1H)**: Default settings work well - **Swing Trading (4H-Daily)**: Increase all periods by 50-100% - **Position Trading (Weekly)**: Double all default periods ### **Asset-Specific Tips:** - **Crypto**: Often more volatile - consider k=0.8 for smoother signals - **Forex**: Works well on major pairs with default settings - **Stocks**: May need slight adjustments per stock volatility - **Indices**: Very effective with standard parameters --- ## 📝 Credits & Sharing Feel free to share this indicator! If you make modifications or improvements, consider sharing back with the community. **Version**: 5 **Created for**: TradingView Pine Script **Category**: Oscillators / Momentum --- *Happy Trading! Remember: The best indicator is the one between your ears. Always think critically and trade responsibly.* 📊✨
Pine Script® 인디케이터
hasanaksoy199264의
2
MARKET REGIME INDICATOR The indicator’s main function is to apply a moving average (MA) from a different symbol. It can be used to identify the broader trend in crypto or stocks. For the selected symbol, the chart turns: Green when price is above the MA Red when price is below the MA You can choose: The type of MA The length (period) The indicator also plots the highest and lowest levels on the selected symbol to help identify potential turning points. It also includes an optional trend confirmation feature: Off On
Pine Script® 인디케이터
Zaimop의
Trend Pulse Oscillator█ OVERVIEW Trend Pulse Oscillator is a momentum oscillator that combines short-term trend strength analysis (price deviation from a dynamic trend line) with optional reference to a higher timeframe trend context. It visualizes market pulse through smoothed oscillator waves, fixed overbought/oversold levels, and zero-line cross signals indicating momentum shifts. The indicator assists in identifying potential entry points after strong moves, early signs of exhaustion or direction change, and supports decision-making by providing longer-period trend awareness █ CONCEPT Built upon the SwiftTrend logic. The core idea is to measure how far price deviates from the adaptive trend line (margin line). Greater deviation in the direction of the trend indicates stronger momentum. When price returns toward the trend line — especially from overbought or oversold zones — it often signals a correction or potential reversal. - The oscillator displays the deviation of price from the trend line and applies user-selected smoothing (EMA, SMA, RMA, WMA). - The longer-period trend controls candle coloring (SwiftTrend candles) and can be used discretionarily as a directional bias/filter for signals. - The color of the oscillator itself depends solely on whether the smoothed value is above or below zero (green above, red below). Fixed OB/OS levels and the zero line help visually evaluate the strength of the deviation. Areas significantly above the OB level or below the OS level indicate extreme price stretch away from the trend line and increased probability of mean reversion. █ FEATURES Calculations - Average candle body size — calculated separately for oscillator and longer-period trend - Dynamic trend line (adaptive margin line) + fixed OB / OS threshold levels - Multiple oscillator smoothing options - Momentum expressed as oscillating waves - Detection of OB/OS crossovers and zero-line breaks Visualization - Oscillator waves colored according to sign (green above zero, red below zero) - Fixed OS level (oversold) — gray, dashed line - OB level (overbought) — color reflects the current longer-period trend direction (green when price is above the longer-period trend line, red when below) - OB and OS levels frequently displayed with light gradient fill for readability (OB gradient inherits HTF trend color; OS gradient remains neutral/gray) - Optional SwiftTrend candle coloring — candles colored according to longer-term trend direction and strength (gradient intensity) - Transparent, layered fill under oscillator waves (stronger near the wave, fading toward zero) Signals - Long / Short — triggered on crossover/crossunder of OB/OS levels (with anti-duplication logic per wave) - Zero Line Long / Zero Line Short — zero-line break confirmed by candle color direction - Longer-period trend change — visual and alert when longer-term trend flips - Important: There is no automatic filtering of OB/OS or zero-line signals by the longer-period trend — traders should apply longer-period trend bias manually Alerts - Long Signal - Short Signal - Zero Line Long - Zero Line Short - Longer-Period Trend Change █ HOW TO USE Add the indicator via Pine Editor (paste the code) or search for “Trend Pulse Oscillator” in the TradingView public library. Main settings - Osc Average Body Periods – averaging period for oscillator body size - Osc Band Multiplier / Tolerance Multiplier – controls width and sensitivity of oscillator bands - Smoothing Type / Length – smoothing method and period for the oscillator wave - Trend Average Body Periods / Band / Tolerance – parameters for the longer-period trend line - Overbought Level / Oversold Level – fixed threshold values - Enable Candle Coloring – turns on SwiftTrend-style candle coloring based on the longer-period trend - Gradient & fill options – control visibility and transparency of gradients and wave fills Trend & candle coloring logic - Price above trend line → bullish (green tones) - Price below trend line → bearish (red tones) █ APPLICATION Momentum trading - Direction and slope of oscillator waves indicate current impulse strength - Return toward zero or zero-line cross can serve as an early warning of correction or reversal Trend following - The longer-period trend acts as a discretionary directional filter - Highest-probability approach: take signals primarily in the direction of the longer-period trend Overbought / Oversold - Fixed OB/OS levels mark zones of extreme deviation from the trend line - Large extensions away from the trend line increase the likelihood of pullback or reversal █ NOTES - This is a supporting tool — never use it as a standalone trading system - Best results are achieved when combined with key support/resistance levels, market structure analysis, and longer-period trend context - OB/OS crosses and zero-line breaks are orientation points only — always validate them against the broader trend picture
Pine Script® 인디케이터
Uncle_the_shooter의
4
MTF EMA Trend Table (50/100/200)Using the MTF EMA Trend Table for Supply & Demand Trading This document explains how to use the Multi‑Timeframe EMA Trend Table as part of a supply and demand trading strategy. The indicator displays the trend direction (Bullish or Bearish) for EMA 50, 100, and 200 across the following timeframes: 5m, 15m, 30m, 1h, 4h, 1d, and 1w. --------------------------------------------- 1. What the Indicator Shows --------------------------------------------- The EMA Trend Table instantly reveals whether price is trading above or below the EMA 50/100/200 on multiple timeframes. • Price above EMA = Bullish trend • Price below EMA = Bearish trend This allows you to identify trend alignment across all key timeframes. --------------------------------------------- 2. Why EMAs Matter in Supply & Demand Trading --------------------------------------------- Supply & Demand zones show where institutions previously bought or sold aggressively. To trade these zones effectively, you must confirm higher‑timeframe trend direction. The EMA table prevents low‑probability trades by keeping you aligned with institutional flow. --------------------------------------------- 3. How to Use the Indicator for Supply & Demand Trading --------------------------------------------- Step 1 — Identify Higher‑Timeframe Bias (4H, 1D, 1W) • Bullish alignment (all green) → Trade demand zones only. • Bearish alignment (all red) → Trade supply zones only. Step 2 — Use 1H, 30M, 15M for Setup Timing These mid‑timeframes help you determine when a pullback is nearing completion. Step 3 — Trigger Entry on the 5M EMA Flip Once price enters a supply or demand zone, wait for the 5m EMA trend to flip in your direction before entering. --------------------------------------------- 4. How to Judge Zone Strength Using EMAs --------------------------------------------- Strong Demand Zone Characteristics: • Price above EMA200 on 1H+ • Zone forms above EMA200 • Pullback touches EMA50 or EMA100 Strong Supply Zone Characteristics: • Price below EMA200 on 1H+ • Zone forms below EMA200 • Pullback touches EMA50 or EMA100 --------------------------------------------- 5. Full Trade Example --------------------------------------------- Higher timeframes are bullish: 1W, 1D, 4H all green. Price pulls back into a 15m demand zone. 5m flips from Bearish → Bullish. This is the entry confirmation. --------------------------------------------- 6. Why This Indicator Improves Your Trading --------------------------------------------- • Confirms trend direction • Shows alignment across timeframes • Helps avoid counter‑trend traps • Improves zone accuracy and confidence • Enhances timing using the 5m EMA flip This combination is ideal for institutional‑style supply and demand trading.
Pine Script® 인디케이터
wesseljburger의
Breaker Blocks Signals [AlgoAlpha]🟠 OVERVIEW This script automates the detection of Breaker Blocks, a popular smart money concept used to identify high-probability reversal zones. It monitors price action for aggressive impulses—measured through a normalized Z-Score—to identify Orderblocks. When these blocks are "broken" or invalidated by price moving through them, they transform into Breaker Blocks. These zones act as "flipped" support or resistance, offering traders specific areas to look for retests and trend continuations. By handling the complex management of zone life-cycles and mitigation, this script provides a clean, real-time map of institutional supply and demand shifts. 🟠 CONCEPTS The indicator relies on the relationship between price momentum and structural invalidation. It first identifies "impulsive" candles by calculating a Z-Score of price distance covered over a specific window. A Z-Score above 4 marks an "Algorithmically Significant" move. When such a move occurs, the script identifies the last opposite-colored candle (the Orderblock) and draws a gray zone. The transformation happens when price closes entirely through one of these gray zones. This "mitigation" is what triggers the creation of a Breaker Block: an old bearish supply zone becomes a bullish demand zone, and vice versa. This transition reflects a shift in market regime where previous trapped participants are forced to exit, often leading to price rejections at these newly formed levels. 🟠 FEATURES Automated Breaker Transformation : Instantly flips mitigated Orderblocks into colored Breaker Blocks (Bullish/Bearish). Rejection Markers : Small arrow icons appear when price enters a Breaker Block and shows signs of respect/reversal. Comprehensive Alerts : Notifications for both the formation of new breakers and real-time price rejections. 🟠 USAGE Setup : Add the script to your chart. It is effective on most timeframes, but many traders prefer the 15m or 1h for intraday structure. Use the "Z-Score Window" to adjust sensitivity; 100 is standard, but lower values (e.g., 50) will find more frequent, smaller impulses. Read the chart : Gray boxes are "Pending" blocks. If price closes above a gray bearish box, it turns into a Bullish Breaker (Green). If price closes below a gray bullish box, it turns into a Bearish Breaker (Red). Look for price to return to these colored zones; the "▲" and "▼" symbols indicate the script has detected a rejection from that level. Settings that matter : Prevent Overlap is useful for avoiding "cluttered" zones in ranging markets. Max Box Age is critical; it ensures that very old, irrelevant zones are removed from your chart after a set number of bars, keeping your technical analysis current and focused on recent price action.
Pine Script® 인디케이터
AlgoAlpha의
13
SilverHawk Pattern + Trend ScannerSilverHawk Pattern + Trend Scanner This indicator scans for common candle patterns (Evening/Morning Star, Engulfing, Kicker) and displays adaptive trend channels (short/long) with strength metrics. Features: - Candle patterns with reversal/continuation % heuristic - Adaptive trend channels (best short/long length selected by Pearson R) - ADX trend power and channel alignment note Settings: - Show specific patterns: toggle visibility - Channel lengths: auto-selected based on best correlation - Alerts on pattern detection Best used on H1 to D1 timeframes in Forex or indices for pattern confirmation and trend analysis. Use with proper risk management and confirmation. Educational tool only. Not financial advice. Trading involves risk.
Pine Script® 인디케이터
SilverHawkSuite_의
SilverHawk SmoothHA DuoSilverHawk SmoothHA Duo This indicator plots dual smoothed Heiken Ashi candles (10/10 fast + 20/20 slow) for trend confirmation. Features: - Fast (10/10) smoothed HA candles (lime/red) - Slow (20/20) smoothed HA candles (lighter lime/red) - Alignment note (middle-left): shows if 10/10 and 20/20 match (bull/bear/not aligned) - Alerts on trend flips (bullish/bearish for each layer or any flip) Settings: - Show 10/10 or 20/20 candles: toggle visibility - Len / Len2: smoothing periods (default 10/10 and 20/20) - Colors: customize bullish/bearish gradients - Show Alignment Note: toggle status text - Enable Alerts: toggle flip alerts - Trigger On Bar Close Only: non-repainting alerts Best used on H1 to D1 timeframes in Forex or indices for confirming trend direction and alignment. Use with proper risk management and confirmation. Educational tool only. Not financial advice. Trading involves risk.
Pine Script® 인디케이터
SilverHawkSuite_의
2
SilverHawk Structure Coach (Lite)SilverHawk Structure Coach (Lite) This indicator identifies market structure breaks (BOS/CHoCH) and strong FVGs for potential reversal or continuation zones. Features: - BOS (Break of Structure) and CHoCH (Change of Character) lines with labels - Optional HH/HL/LH/LL swing labels - Strong FVG detection (gap between candles, size filter, extension, mitigation) Settings: - Pivot Length: lookback for highs/lows (default 12) - Show BOS/CHoCH Labels: toggle structure breaks - Show HH/HL/LH/LL Labels: toggle swing points - Show Strong FVGs: toggle gap detection - Min FVG size (ticks): minimum gap for validity - Require gap between candle bodies: stronger filter - Extend FVG boxes (bars): how far to project FVGs - Hide mitigated FVGs: remove when price closes through 50% Best used on H1 to D1 timeframes in Forex or indices for structure analysis. Use with proper risk management and confirmation. Educational tool only. Not financial advice. Trading involves risk.
Pine Script® 인디케이터
SilverHawkSuite_의