지금 시작

스크립트에서 "机械革命无界15+时不时闪屏"에 대해 찾기

Easy System 420In this strategy, 15 indicators are used, each giving its results as a numerical value, which then is added or subtracted from the total points, gathered from all 15 indicators. Many thanks to RafaelZioni for his great work making the EasySys1 script which i modified to create this script. Onchart is drawn some of the indicators, but not all, a info panel is drawn showing the value each indicator has calculated. The info panel can be turned on or off. Many of the indicator settings can be changed by user, and this is recommended, to tune the strategy to users chosen pair/timeframe. Therefore any pair or timeframe can be used, the strategy tester results showing possible results, remember to set commission to match your broker. example chart settings here have common crypto exchange commission value: 0.25% indicator list : SAR + STT + ZigZag + ROC + DMI + CCI + Weis + SMA + AO + MOM + Hist + BB + Ichimoku + HMA
Pine Script™ 전략
SeaSide420의
40
TST Signals & AlertsThis is an unofficial script for strategies tested on Trading Strategy Testing Youtube channel. Over time, most successful strategies will be added with an option to set strategy-specific alerts . TST Signals & Alerts will draw signals on the chart when the entry conditions are met. You can also opt for displaying indicators . My script is meant for beginners but can be used by veterans too. Just pick one or two strategies, you don't want to flood your chart with conflicting signals. You may want to support your trades with a proper analysis. Is the market trending? Is there a fundament around the corner? If a new signal occurs when there is still an open position, you are not supposed to take another. The current version includes MACD and ADX + BB and BB strategies. MACD strategy: ►Buy, when MACD crosses below the signal line when it is negative. The price must also be above 200 EMA. ►Sell, when MACD crosses above the signal line when it is positive. The price must also be below 200 EMA. ►This strategy was tested on 15-minute charts of EURUSD with reward-to-risk ratio 1,5 and win rate of 61% over 100 trades. ►►►MACD has to be added to your chart separately because it needs a new window. Ticking display indicators will not add MACD to your chart. ►►►MACD was also tested by a different channel I made a script for. You can view the results and the script here: ADX + BB strategy: ►Buy, when the price is above 200 EMA and ADX becomes higher than 25. ►Sell, when the price is below 200 EMA and ADX becomes higher than 25. ►Stop-loss is either 200 EMA or Bollinger Bands level. Check the channel for more information. ►This strategy was tested on 5-minute charts of EURUSD, USDJPY, AUDUSD with reward-to-risk ratio 1,2 and win rate of 56% over 100 trades in total. BB strategy: ►Buy, when the price is above 200 EMA and candle's low is below the lower Bollinger Band. ►Sell, when the price is below 200 EMA and candle's high is above the upper Bollinger Band. ►This strategy was tested on 15-minute charts of EURUSD with reward-to-risk ratio 1,5 and win rate of 52% over 100 trades in total. ►►►Due to the relatively low win rate of this strategy, you need to filter out potentially harmful signals with a proper analysis. Bear in mind that backtesting performance doesn't guarantee future profitability. • Most systematic strategies are not suitable for each timeframe - if you use the different timeframe than the one it was tested on, the result can differ significantly. • You should perform your own backtest to base your trades on more data & to establish confidence in the selected strategy. • This script is not a replacement for proper analysis. New strategies will be added when I have time. If I see multiple people asking for the same feature, I might agree to release it with a new version. I am not going to add input options in this script, it could come as a separate script though. I am in no way affiliated with the Youtube channel, so if you find the script helpful, shot me a message or send me some TradingView coins >) If you encounter any bug, you can report it in a message or in comments. Support it with screenshot and relevant information such as a time when it occurred and what options were on etc.
Pine Script® 인디케이터
OrcChieftain의
8
Kal's MTF OBV Haar Version 3Kal’s Multi-Time-Frame On-Balance-Volume Haar, also known as Kal’s MTF OBV Haar is a method/study for finding trending volume levels on stocks, indexes and cryptocurrencies using OBV, CMF and CCI over different time-frames (10Min, 1H, 4H, 1D, 1W, 1Month). Upon adding to the 10Min chart, the sample Image in Tradingview looks as follows: Note: Always check your time-frame(TF). Compare current TF to a row’s(bead row’s) time-frame. Ensure current TF is lower than a row’s time-frame when looking at it and higher time-frame rows above it. For instance, if you choose your chart’s time-frame at 1D, the lower time-frame rows(i.e. 10Min, 1H, 4H) don’t make sense. For cryptocurrencies, one week is 7 periods, two weeks is 14 periods For stocks, one week is 5 periods, two weeks is 10 periods For the study of stocks, I used 9-period EMA over OBV for time-frames (10Min, 1H, 4H, D) 4-period EMA over OBV for time-frames (W, M) For the study of cryptocurrencies, I would update EMAs as follows: 13-period EMA over OBV for time-frames (10Min, 1H, 4H, D) 6-period EMA over OBV for time-frames (W, M) These days I'm finding the following parameters have better fitting 19-period EMA over OBV for time-frames (10Min, 1H, 4H, D) 9-period EMA over OBV for time-frames (W, M) Description: --------------- In the study plot, the lowest row is 10Min, the row above 10Min is 1H, then 4H, then 1D, then 1W and the highest row is 1M Note: Always check your time-frame(TF). Compare current TF to a row’s(bead row’s) time-frame. Ensure current TF is lower than a row’s time-frame when looking at it and higher time-frame rows above it. For instance, if you choose your chart’s time-frame at 1D, the lower time-frame rows(i.e. 10Min, 1H, 4H) don’t make sense. Lime( Bright Green) dot implies Trending Uptrend for that time-frame Red dot implies Trending Downward for that time-frame It’s best to wait and research for possibility of Trend Reversal during the following dots/bricks: Silver dot implies indecisive up Orange dot implies indecisive downtrend Lime Brick implies CCI is near Zero line( between 15 and 0) Red Brick implies CCI is near Zero line( between -15 and 0) Purple dot implies CCI zero rejection to possibly/probably continue trend UP Yellow dot implies CCI zero rejection to possibly/probably continue trend Down Aqua dot implies that trend is overbought or oversold. This dot usually happens between red dots or green dots. Therefore, it’s best to wait for pull-back especially in lower time frames. Safe Trading! Kal Gandikota Legal Disclaimer: This script is published here so I get replies from fellow viewers to educate myself. Hence, if anyone uses this script for making their financial decisions, I am not responsible for any failures incurred. If you have questions or improvements related to this script, please feel free to leave comments and as time permits, will respond to those comments.
Pine Script® 인디케이터
KalGandikota의
1
Historic VPoCs and pseudo VPVRThis study tries to recreate session based historic VPoCs and VPVR Volume Profile as they are used by TradingLatino TradingView user. It's aimed at BTCUSDT pair and 4h timeframe. HOW IT WORKS HOW IT WORKS - VPVR Profile Block It gathers volume from the last chosen Bars in order to draw the vpvr profile block Volume that intersects with current level range being studied is added to its value. Additionally the current level price is modified so that it matches the level price where most of the volume has concentrated So you get a pretty accurate price for drawn volume while at the same time the levels are not stuck to arbitrary level prices. HOW IT WORKS - VPoC It calculates a Volume Profile for the given historic session but then it only outputs that Volume Profile VPoC. SETTINGS Show VPVR Volume Profile {True}. Show Historic VPoC lines {True}. Show Historic VPoC labels {True}. Extend Historic VPoC lines {True}: If this option is turned off the VPoC lines are only shown during the session duration. Show tick difference from current price {False}: BETA. Feedback is needed because I'm not sure how it should work this setting. VPVR Number of bars {100}: Define the Visible Range in number of bars so that its Volume Profile can be shown. VPVR Profile width (in bars) {15}: VPVR Profile can be make larger or smaller in width thanks to this option. VPVR Profile offset (in bars) {15}: VPVR Profile can be shown more to the left or to the right if the defaults do not suit you. Historic Session Volume Profile timeframe {1D}: Historic VPoC use 1 day as their timeframe reference by default. Number of decimal digits {2}: How many decimal digits are shown in label prices. Number of previous sessions to print VPoC {5}: How many previous sessions VPoCs are to be printed. The maximum for this setting is 20. Historic VPoC lines width (in pixels) {2}. Historic VPoC labels size {small}. History VPoC line offset (in bars) {5}: How far to the right VPoCs lines are to be extended. Note: This setting does not apply when 'Extend Historic VPoC lines' is set to 'False'. WARNING Please be aware that VPoC from the first previous session might not be accurate due to Pine Script limitations. VPVR USAGE This is not a VPVR like the official TradingView indicator. This is a pseudo VPVR and that means it needs some manual input from you. But, don't worry it's quite easy to do and if you always use the same number of bars to calculate your VPVR then you might even just set it up once. In order to show the VPVR (or Volume Profile on the Visible Range): Rescale your chart so that you see all the bars for your Visible Range. Click on the ruler tool. Click on the last bar (far to the right) shown on the screen Drag the ruler to first bar (far to the left) shown on the screen Check what the ruler says E.g. it says: 101 bars Open this study settings Modify: 'VPVR Number of bars ' setting So that its value matches your measured number of bars (101) Press OK to confirm and wait for the indicator to refresh. STRATEGY USAGE If your strategy uses VPoC to define your resistances or supports you can check the VPoCs shown here. FEEDBACK I have only used this identifier in BTCUSDT 4h timeframe. I'm interested to know what needs to be tweaked in other securities and timeframes. PINE STUDY TRICK This study let's you choose the number of decimals the label will use. CREDITS I have reused and adapted some code from 'Poor man's volume profile' study which it's from TradingView IldarAkhmetgaleev user. I also wanted to thank him for helping me understanding his study. I have reused some code from 'MTF Selection Framework - PineCoders FAQ' study which it's from TradingView PineCoders user.
Pine Script® 인디케이터
ruckard의
16
Camelback-IndikatorDer Camelback-Indikator stammt von Joe Ross. Er beinhaltet zwei einfache gleitende Durchschnitte mit 40 Perioden und einen exponentiellen gleitenden Durchschnitt mit 15 Perioden. Sobald wir mit Preisbalken arbeiten, die vollständig unterhalb des MA40-Kanals liegen, versuchen wir einen Ausbruch durch das Tief des Balkens zu verkaufen, der das lokale Hoch macht. Mit dem lokalen Hoch ist das Hoch einer geringfügigen Korrektur außerhalb des MA40-Kanals gemeint. Sobald wir mit Preisbalken arbeiten, die vollständig oberhalb des MA40-Kanals liegen, versuchen wir einen Ausbruch durch das Hoch des Balkens zu kaufen, der das lokale Tief macht. Mit dem lokalen Tief ist das Tief einer geringfügigen Korrektur außerhalb des Kanals gemeint. Was wir hier tun, kann als Scalping bezeichnet werden. Das Skalieren des längerfristigen Charts mit kurzfristigen Handelstechniken ist eine großartige Möglichkeit, um die Art von Aktion zu handeln, die wir in diesen Charts sehen. Der Camelback-Indikator kann auch zum scannen von Aktiemärkten benutzt werden. Der Indikator beinhaltet neben der Camelback-Funktion außerdem noch einen einfachen gleitentenden Durchschnitt mit 200 Perioden, zwei einfache gleitentende Durchschnitte (im script short-term genannt) mit einstellbarer Periodendauer, einer davon angewendet auf Hochs, bei dem anderen kann die Anwendung der Quelle eingestellt werden. Bei beiden ist ein Offset einstellbar. The Camelback indicator is from Joe Ross. It includes two simple moving averages with 40 periods and an exponential moving average with 15 periods. Once we are working with price bars that are completely below the MA40 channel, we try to sell a breakout through the low of the bar which makes the local high. By the local high is meant the high of a minor correction outside of the MA40 channel. Once we are working with price bars that are completely above the MA40 channel, we try to buy a breakout through the high of the bar which makes the local low. By the local low we mean the low of a minor correction outside the channel. What we are doing here can be called scalping. Scaling the longer term chart with short term trading techniques is a great way to trade for the kind of action we see on these charts. The Camelback indicator can also be used to scan stock markets. In addition to the Camelback function, the indicator also includes a simple moving average with 200 periods, two simple moving averages (called short-term in the script) with adjustable period duration, one of which is applied to highs, the other can be used to set the source . An offset can be set for both.
Pine Script® 인디케이터
N18041972의
2
Spread for VSAЭтот индикатор сравнивает спрэд (расстояние от закрытия предыдущего бара до закрытия текущего бара или индикатор Momentum = 1) на периоде для сравнения. На графике за 100 % принимается среднее значение спрэда за период для сравнения - красная линия. (по умолчанию период сравнения равен 3 - то есть три последних бара) Размер бара на графике равен текущему спрэду по отношению к 100 %. Если бар меньше 100 % то он ниже среднего, и наоборот если больше 100% то он больше среднего. Если бар красный - спрэд отрицательный (текущее закрытие меньше предыдущего закрытия) Если бар зелёный - спрэд положительный (текущее закрытие больше предыдущего закрытия) Если бар меньше 75% то он будет окрашен в тусклый цвет (этот процент можно менять в настройках) Если в настройках период спрэда указать больше 1, например 2, то спрэд будет равен закрытие мину закрытие через 1 бар назад. (это для экспериментов). Примечание: по умолчанию период для сравнения равен 3, но также интересен график и при значениях 15 и больше. Экспериментируйте. По вопросам и предложениям пишите в комментариях. Automatic translation google translate. This indicator compares the spread (the distance from the closing of the previous bar to the closing of the current bar or the Momentum indicator = 1) on the period for comparison. On the chart, the average spread value for the period for comparison is the red line, taken as 100%. (by default, the comparison period is 3 - that is, the last three bars) The size of the bar on the chart is equal to the current spread with respect to 100%. If the bar is less than 100%, then it is below average, and vice versa, if more than 100%, then it is more than average. If the bar is red, the spread is negative (the current close is less than the previous close) If the bar is green, the spread is positive (the current close is greater than the previous close) If the bar is less than 75%, then it will be painted in a dull color (this percentage can be changed in the settings) If in the settings the period of the spread is specified more than 1, for example 2, then the spread will be equal to closing mine closing after 1 bar back. (this is for experimentation). Note: the default period for comparison is 3, but the chart is also interesting for values ​​of 15 or more. Experiment. For questions and suggestions, write in the comments.
Pine Script® 인디케이터
Alex_Dyuk의
Bull Club BiasThe script intends to eliminate noise from the chart. It uses a combination of multiple indicators into 1. For long bias: Close is greater than the ADX 15 Period EMA on close is greater than SMA on high 13 period RSI is greater than 25 periods RSI MACD is greater than 0 For short bias: Close is lower than the ADX 15 Period EMA on close is lower than SMA on high 13 period RSI is lower than 25 periods RSI MACD is lower than 0 For every other combination, it is a range-bound bias. NSE:BANKNIFTY A green background indicates long bias A Red background indicates short bias An Orange background indicates range-bound bias
Pine Script® 인디케이터
Bull-Club의
4
TA Basics: further "Steps" with our Moving AverageSo far in this series of posts, we have worked thru creating a basic zero-lag moving average, then moved forward all the way to coding a "Fibonacci" Weighted Moving Average. in this post we take a look at a technique that can help traders minimize noise in the underlying data and get better insight on the changes that are happening in the data series represented by the moving average. we'll look at adding "stepping" to our Fibonacci Moving Average as an example. we introduce the Stepping Fibonacci Moving Average , or Step_FiMA note that you can use the same technique with any plot you may have. feel free to copy or leverage the relevant parts of the script - the script is commented to make this easier. How is this useful? ================== with "stepping", you get your indicator to "round" the outcome into pre-specified bands or ranges. this works very similar to how, for example, range or Renko charts work. you can easily see the difference in the chart above once we look at a non-stepped and a stepping moving average of the same length side-by-side the more granular your timeframe is, you will see the effect of the stepping clearer - here's how the same chart looks when we go into the 1-hr aggregation Notes about this script ==================== there are couple of pieces i wanted to highlight in the script if you plan to use some of it : 1 - the step(x) function is meant to try to automatically pick the best "suitable" step size based on the range of the underlying series (for example, the closing price). these ranges i included here in the code are just my own "best choices" - you are totally welcome to adjust these ranges and the resulting step size to your own preference 2 - we applied the stepping as a user-choice. user can choose a manual entry, or "0" to get the code to automatically pick the step size, or enter -1 (or actually any value below zero) to cancel the stepping option altogether - this gives us some flexibility on how to use the stepping in an indicator 3 - very important (and somehow confusing): on the "rounding" approach: the magic math formula that actually creates the stepping is this one result = round(input / step) * step now, this tells the script to "round" the result up or down (the basic rounding) -- so for example, a price of 17 with a step of 5 would be rounded (down) to 15, where as a price of 18 would be rounded "up" to 20 -- this is not the way some of us would expect or want, cause the price never reached 20 and they would want an 18 to still be rounded to 15 - and the stepping line not to show 20 *until* the price actually hits or exceeds 20 -- in that case, you would need to replace the function "round" with the function "floor" -- so the new formula becomes: floor(input / step) * step -- in an ideal world, we can make this rounding choice a user-option in the settings -- maybe in an improved version 4 - we kept the smoothing option, and it takes place before the stepping is applied - we continue to use that smoothing to further minimize the level changes in the FiMA line. I hope you find this script useful in your journey with technical analysis and DIY scripting, and good luck in your trading.
Pine Script® 인디케이터
RedKTrader의
Reminder Message (with color picker) - ApopheniaPaysThis is a very simple script. It displays a message above the latest price. I coded it because I need a constant reminder to keep me from overtrading. You can customize several options: - The message text - How high above the latest price the message is displayed - How often it is displayed. 1=display constantly, 2=only show it during every other period, 3=only show it every 3rd new period, etc. So, for example, if you are on the 15 minute chart, and set a frequency of 3, it will show it for the first 15 minutes out of every 45. - Color and lightness. This can be used as an example of how to add a color selection input to your own scripts.
Pine Script® 인디케이터
ApopheniaPays의
16
Combing in MACD and MTFHi all, I'm trying to wedge in the MACD into a multiple timeframe. Scope is to create: 1) an alert when the MACD across all timeframes is positive, 2) an alert when the MACD across all timeframes is negative, and 3) one when neither of them is applicable. Would anyone be so kind to give it some thoughts, please? //@version=2 strategy(" Easy MTF Strategy", overlay=false) TF_1_time = input("3", "Timeframe 1") TF_2_time = input("5", "Timeframe 2") TF_3_time = input("15", "Timeframe 3") TF_4_time = input("30", "Timeframe 4") fastLen = input(title="Fast Length", type=integer, defval=12) slowLen = input(title="Slow Length", type=integer, defval=26) sigLen = input(title="Signal Length", type=integer, defval=9) = macd(close, fastLen, slowLen, sigLen) width = 5 upcolor = green downcolor = red neutralcolor = blue linestyle = line TF_1 = security(tickerid, TF_1_time, open) < security(tickerid, TF_1_time, close) ? true:false TF_1_color = TF_1 ? upcolor:downcolor TF_2 = security(tickerid, TF_2_time, open) < security(tickerid, TF_2_time, close) ? true:false TF_2_color = TF_2 ? upcolor:downcolor TF_3 = security(tickerid, TF_3_time, open) < security(tickerid, TF_3_time, close) ? true:false TF_3_color = TF_3 ? upcolor:downcolor TF_4 = security(tickerid, TF_4_time, open) < security(tickerid, TF_4_time, close) ? true:false TF_4_color = TF_4 ? upcolor:downcolor TF_global = TF_1 and TF_2 and TF_3 and TF_4 TF_global_bear = TF_1 == false and TF_2 == false and TF_3 == false and TF_4 == false TF_global_color = TF_global ? green : TF_global_bear ? red : white TF_trigger_width = TF_global ? 6 : width plot(1, style=linestyle, linewidth=width, color=TF_1_color) plot(5, style=linestyle, linewidth=width, color=TF_2_color) plot(10, style=linestyle, linewidth=width, color=TF_3_color) plot(15, style=linestyle, linewidth=width, color=TF_4_color) plot(25, style=linestyle, linewidth=4, color=TF_global_color) exitCondition_Long = TF_global_bear exitCondition_Short = TF_global longCondition = TF_global if (longCondition) strategy.entry("MTF_Long", strategy.long) shortCondition = TF_global_bear if (shortCondition) strategy.entry("MTF_Short", strategy.short) strategy.close("MTF_Long", when=exitCondition_Long) strategy.close("MTF_Short", when=exitCondition_Short)
Pine Script™ 전략
marcoderoni의
11
Z-HistogramIt is possible to approximate the underlying distribution of a random variable by using what is called an "Histogram". In order to construct an histogram one must first split the data into several intervals (also called bins) often of the same size and count the number of values falling within each intervals, the histogram plot is then constructed with the X axis representing the measured variable and the Y axis representing the frequency. The proposed script aim to estimate the underlying distribution of a rolling z-score by constructing its histogram, here the histogram consist of 13 bins of width 0.5 rolling standard deviations. The length setting define the rolling z-score period, the window setting define the number of past data to be counted, finally using the "Total" option (true by default) will count all the rolling z-scores values since the first bar, in order to use the window setting make sure to uncheck the "Total" option. DISPLAY In order to see the entirety of the histogram make sure to double click on the indicator window and to have all the lower panels (text notes, pine editor...etc) hidden, finally make sure to zoom-in in order to see the frequency numbers displayed. Z-Histogram on BTCUSD 15 min TF, the blue bins represent intervals situated over 0 while red bins represent intervals situated under 0. Here σ represent the X-axis in standard deviations, the histogram start with a bin situated at σ = -3 which count the number of times the rolling z-score was within -3 and -2.5, the histogram end with the bin situated at σ = 3 which count the number of time the rolling z-score was within 3 and 3.5. It is also possible to look at the shape of the histogram without having the indicator window at full size. INTERPREATION An histogram can give really interesting information such as overall trend direction and strength. The direction can be measured by looking at the skewness of the histogram, with a negative skewness (the peak of the histogram situated at the right from the center) representing down-trending variations and positive skewness (the peak of the histogram situated at the left from the center) representing up-trending variations, while a symmetrical histogram could represent a ranging market. The farther away the peak of the histogram is situated from the center, the stronger the trend. Another interesting characteristic is the tailedness of the histogram, which can give information about the cleanliness of the trend, for example a positive skew and high tailedness would represent a clean up-trend, as it could suggest less variations contrary to the main trend. An histogram applied to the rolling z-score can give various useful information. As a recall the rolling z-score of the price measure the distance between the closing price and its moving average in term of rolling standard deviations, for example if the rolling z-score is equal to 2 it means that the closing price is currently 2 rolling standard deviations over its moving average. Lets for example analyze the histogram using INTC 15 min tf with a window of 456 bars and rolling z-score of length = 100 in order to review longer term variations. We can see from the histogram that the uptrend visible on the chart is represented by the bins situated over 0 having an overall higher frequency than the bins under 0, we can see that the closing price tended to stay between 1 and 1.5 rolling standard deviations over its period 100 moving average. Here bins under 0 accounts for retracements in the trend. IN SUMMARY An histogram can give various information regarding the price evolution of a security, the proposed script aim to plot the histogram of a rolling z-score. Now this script might not be too useful but it was fun to make, also it does not mean that an histogram is not an useful tool in the context of trading, the only thing required is a god implementation of it (like volume profiles for example) In this post we have also reviewed some important statistical concepts such as distributions, z-score, skewness and tailedness, each being extremely important in the quantitative trading field. Thx for reading !
Pine Script® 인디케이터
alexgrover의
18
Delta Volume Columns Pro [LucF]█  OVERVIEW This indicator displays volume​​ delta information calculated with intrabar inspection on historical bars, and feed updates when running in realtime. It is designed to run in a pane and can display either stacked buy/sell volume​ columns or a signal line which can be calculated and displayed in many different ways. Five different models are offered to reveal different characteristics of the calculated volume​ delta information. Many options are offered to visualize the calculations, giving you much leeway in morphing the indicator's visuals to suit your needs. If you value delta volume​ information, I hope you will find the time required to master Delta Volume​ Columns Pro well worth the investment. I am confident that if you combine a proper understanding of the indicator's information with an intimate knowledge of the volume​ idiosyncrasies on the markets you trade, you can extract useful market intelligence using this tool. █  WARNINGS 1. The indicator only works on markets where volume​ information is available,   Please validate that your symbol's feed carries volume​ information before asking me why the indicator doesn't plot values. 2. When you refresh your chart or re-execute the script on the chart, the indicator will repaint because elapsed realtime bars will then recalculate as historical bars. 3. Because the indicator uses different modes of calculation on historical and realtime bars, it's critical that you understand the differences between them. Details are provided further down. 4. Calculations using intrabar inspection on historical bars can only be done from some chart timeframes. See further down for a list of supported timeframes.   If the chart's timeframe is not supported, no historical volume​ delta will display. █  CONCEPTS Chart bars Three different types of bars are used in charts:  1. Historical bars are bars that have already closed when the script executes on them.  2. The realtime bar is the current, incomplete bar where a script is running on an open market. There is only one active realtime bar on your chart at any given time.    The realtime bar is where alerts trigger.  3. Elapsed realtime bars are bars that were calculated when they were realtime bars but have since closed.    When a script re-executes on a chart because the browser tab is refreshed or some of its inputs are changed, elapsed realtime bars are recalculated as historical bars. Why does this indicator use two modes of calculation? Historical bars on TradingView charts contain OHLCV data only, which is insufficient to calculate volume​ delta on them with any level of precision. To mine more detailed information from those bars we look at intrabars , i.e., bars from a smaller timeframe (we call it the intrabar timeframe ) that are contained in one chart bar. If your chart Is running at 1D on a 24x7 market for example, most 1D chart bars will contain 24 underlying 1H bars in their dilation. On historical bars, this indicator looks at those intrabars to amass volume​ delta information. If the intrabar is up, its volume​ goes in the Buy bin, and inversely for the Sell bin. When price does not move on an intrabar, the polarity of the last known movement is used to determine in which bin its volume​ goes. In realtime, we have access to price and volume​ change for each update of the chart. Because a 1D chart bar can be updated tens of thousands of times during the day, volume​ delta calculations on those updates is much more precise. This precision, however, comes at a price:  — The script must be running on the chart for it to keep calculating in realtime.  — If you refresh your chart you will lose all accumulated realtime calculations on elapsed realtime bars, and the realtime bar.   Elapsed realtime bars will recalculate as historical bars, i.e., using intrabar inspection, and the realtime bar's calculations will reset.   When the script recalculates elapsed realtime bars as historical bars, the values on those bars will change, which means the script repaints in those conditions.  — When the indicator first calculates on a chart containing an incomplete realtime bar, it will count ALL the existing volume​ on the bar as Buy or Sell volume​,   depending on the polarity of the bar at that point. This will skew calculations for that first bar. Scripts have no access to the history of a realtime bar's previous updates,   and intrabar inspection cannot be used on realtime bars, so this is the only to go about this.  — Even if alerts only trigger upon confirmation of their conditions after the realtime bar closes, they are repainting alerts   because they would perhaps not have calculated the same way using intrabar inspection.  — On markets like stocks that often have different EOD​ and intraday feeds and volume​ information,   the volume's scale may not be the same for the realtime bar if your chart is at 1D, for example,   and the indicator is using an intraday timeframe to calculate on historical bars.  — Any chart timeframe can be used in realtime mode, but plots that include moving averages in their calculations may require many elapsed realtime bars before they can calculate.   You might prefer drastically reducing the periods of the moving averages, or using the volume​ columns mode, which displays instant values, instead of the line. Volume Delta Balances This indicator uses a variety of methods to evaluate five volume​ delta balances and derive other values from those balances. The five balances are: 1 — On Bar Balance : This is the only balance using instant values; it is simply the subtraction of the Sell volume​ from the Buy volume​ on the bar. 2 — Average Balance : Calculates a distinct EMA for both the Buy and Sell volumes, and subtracts the Sell EMA from the Buy EMA. 3 — Momentum Balance : Starts by calculating, separately for both Buy and Sell volumes, the difference between the same EMAs used in "Average Balance" and   an SMA of double the period used for the "Average Balance" EMAs. The difference for the Sell side is subtracted from the difference for the Buy side,   and an RSI of that value is calculated and brought over the −50/+50 scale. 4 — Relative Balance : The reference values used in the calculation are the Buy and Sell EMAs used in the "Average Balance".   From those, we calculate two intermediate values using how much the instant Buy and Sell volumes on the bar exceed their respective EMA — but with a twist.   If the bar's Buy volume​ does not exceed the EMA of Buy volume​, a zero value is used. The same goes for the Sell volume​ with the EMA of Sell volume​.   Once we have our two intermediate values for the Buy and Sell volumes exceeding their respective MA, we subtract them. The final "Relative Balance" value is an ALMA of that subtraction.   The rationale behind using zero values when the bar's Buy/Sell volume​ does not exceed its EMA is to only take into account the more significant volume​.   If both instant volume​ values exceed their MA, then the difference between the two is the signal's value.   The signal is called "relative" because the intermediate values are the difference between the instant Buy/Sell volumes and their respective MA.   This balance flatlines when the bar's Buy/Sell volumes do not exceed their EMAs, which makes it useful to spot areas where trader interest dwindles, such as consolidations.   The smaller the period of the final value's ALMA, the more easily you will see the balance flatline. These flat zones should be considered no-trade zones. 5 — Percent Balance : This balance is the ALMA of the ratio of the "On Bar Balance" value, i.e., the volume​ delta balance on the bar (which can be positive or negative),   over the total volume for that bar. From the balances and marker conditions, two more values are calculated: 1 — Marker Bias : It sums the up/down (+1/‒1) occurrences of the markers 1 to 4 over a period you define, so it ranges from −4 to +4, times the period.   Its calculation will depend on the modes used to calculate markers 3 and 4. 2 — Combined Balances : This is the sum of the bull/bear (+1/−1) states of each of the five balances, so it ranges from −5 to +5. █  FEATURES The indicator has two main modes of operation: Columns and Line . Columns • In Columns mode you can display stacked Buy/Sell volume​ columns. • The buy section always appears above the centerline, the sell section below. • The top and bottom sections can be colored independently using eight different methods. • The EMAs of the Buy/Sell values can be displayed (these are the same EMAs used to calculate the "Average Balance"). Line • Displays one of seven signals: the five balances or one of two complementary values, i.e., the "Marker Bias" or the "Combined Balances". • You can color the line and its fill using independent calculation modes to pack more information in the display.  You can thus appraise the state of 3 different values using the line itself, its color and the color of its fill. • A "Divergence Levels" feature will use the line to automatically draw expanding levels on divergence events. Default settings Using the indicator's default settings, this is the information displayed: • The line is calculated on the "Average Balance". • The line's color is determined by the bull/bear state of the "Percent Balance". • The line's fill gradient is determined by the advances/declines of the "Momentum Balance". • The orange divergence dots are calculated using discrepancies between the polarity of the "On Bar Balance" and the chart's bar. • The divergence levels are determined using the line's level when a divergence occurs. • The background's fill gradient is calculated on advances/declines of the "Marker Bias". • The chart bars are colored using advances/declines of the "Relative Balance". Divergences are shown in orange. • The intrabar timeframe is automatically determined from the chart's timeframe so that a minimum of 50 intrabars are used to calculate volume​ delta on historical bars. Alerts The configuration of the marker conditions explained further is what determines the conditions that will trigger alerts created from this script. Note that simply selecting the display of markers does not create alerts. To create an alert on this script, you must use ALT-A from the chart. You can create multiple alerts triggering on different conditions from this same script; simply configure the markers so they define the trigger conditions for each alert before creating the alert. The configuration of the script's inputs is saved with the alert, so from then on you can change them without affecting the alert. Alert messages will mention the marker(s) that triggered the specific alert event. Keep in mind, when creating alerts on small chart timeframes, that discrepancies between alert triggers and markers displayed on your chart are to be expected. This is because the alert and your chart are running two distinct instances of the indicator on different servers and different feeds. Also keep in mind that while alerts only trigger on confirmed conditions, they are calculated using realtime calculation mode, which entails that if you refresh your chart and elapsed realtime bars recalculate as historical bars using intrabar inspection, markers will not appear in the same places they appeared in realtime. So it's important to understand that even though the alert conditions are confirmed when they trigger, these alerts will repaint. Let's go through the sections of the script's inputs. Columns The size of the Buy/Sell columns always represents their respective importance on the bar, but the coloring mode for tops and bottoms is independent. The default setup uses a standard coloring mode where the Buy/Sell columns are always in the bull/bear color with a higher intensity for the winning side. Seven other coloring modes allow you to pack more information in the columns. When choosing to color the top columns using a bull/bear gradient on "Average Balance", for example, you will have bull/bear colored tops. In order for the color of the bottom columns to continue to show the instant bar balance, you can then choose the "On Bar Balance — Dual Solid Colors" coloring mode to make those bars the color of the winning side for that bar. You can display the averages of the Buy and Sell columns. If you do, its coloring is controlled through the "Line" and "Line fill" sections below. Line and Line fill You can select the calculation mode and the thickness of the line, and independent calculations to determine the line's color and fill. Zero Line The zero line can display dots when all five balances are bull/bear. Divergences You first select the detection mode. Divergences occur whenever the up/down direction of the signal does not match the up/down polarity of the bar. Divergences are used in three components of the indicator's visuals: the orange dot, colored chart bars, and to calculate the divergence levels on the line. The divergence levels are dynamic levels that automatically build from the line's values on divergence events. On consecutive divergences, the levels will expand, creating a channel. This implementation of the divergence levels corresponds to my view that divergences indicate anomalies, hesitations, points of uncertainty if you will. It precludes any attempt to identify a directional bias to divergences. Accordingly, the levels merely take note of divergence events and mark those points in time with levels. Traders then have a reference point from which they can evaluate further movement. The bull/bear/neutral colors used to plot the levels are also congruent with this view in that they are determined by the line's position relative to the levels, which is how I think divergences can be put to the most effective use. One of the coloring modes for the line's fill uses advances/declines in the line after divergence events. Background The background can show a bull/bear gradient on six different calculations. As with other gradients, you can adjust its brightness to make its importance proportional to how you use it in your analysis. Chart bars Chart bars can be colored using seven different methods. You have the option of emptying the body of bars where volume​ does not increase, as does my TLD indicator, and you can choose whether you want to show divergences. Intrabar Timeframe This is the intrabar timeframe that will be used to calculate volume​ delta using intrabar inspection on historical bars. You can choose between four modes. The three "Auto-steps" modes calculate, from the chart's timeframe, the intrabar timeframe where the said number of intrabars will make up the dilation of chart bars. Adjustments are made for non-24x7 markets. "Fixed" mode allows you to select the intrabar timeframe you want. Checking the "Show TF" box will display in the lower-right corner the intrabar timeframe used at any given moment. The proper selection of the intrabar timeframe is important. It must achieve maximal granularity to produce precise results while not unduly slowing down calculations, or worse, causing runtime errors. Note that historical depth will vary with the intrabar timeframe. The smaller the timeframe, the shallower historical plots you will be. Markers Markers appear when the required condition has been confirmed on a closed bar. The configuration of the markers when you create an alert is what determines when the alert will trigger. Five markers are available: • Balances Agreement : All five balances are either bullish​ or bearish​. • Double Bumps : A double bump is two consecutive up/down bars with +/‒ volume​​ delta, and rising Buy/Sell volume​ above its average. • Divergence confirmations : A divergence is confirmed up/down when the chosen balance is up/down on the previous bar when that bar was down/up, and this bar is up/down. • Balance Shifts : These are bull/bear transitions of the selected signal. • Marker Bias Shifts : Marker bias shifts occur when it crosses into bull/bear territory. Periods Allows control over the periods of the different moving averages used to calculate the balances. Volume​ Discrepancies Stock exchanges do not report the same volume​ for intraday and daily (or higher) resolutions. Other variations in how volume​ information is reported can also occur in other markets, namely Forex, where volume​ irregularities can even occur between different intraday timeframes. This will cause discrepancies between the total volume​ on the bar at the chart's timeframe, and the total volume​​ calculated by adding the volume​​ of the intrabars in that bar's dilation. This does not necessarily invalidate the volume​​ delta information calculated from intrabars, but it tells us that we are using partial volume​ data. A mechanism to detect chart vs intrabar timeframe volume​​ discrepancies is provided. It allows you to define a threshold percentage above which the background will indicate a difference has been detected. Other Settings You can control here the display of the gray dot reminder on realtime bars, and the display of error messages if you are using a chart timeframe that is not greater than the fixed intrabar timeframe, when you use that mode. Disabling the message can be useful if you only use realtime mode at chart timeframes that do not support intrabar inspection. █  RAMBLINGS On Volume​ Delta Volume​ is arguably the best complement to interpret price action, and I consider volume​ delta to be the most effective way of processing volume​ information. In periods of low-volatility price consolidations, volume​ will typically also be lower than normal, but slight imbalances in the trend of the buy/sell volume​ balance can sometimes help put early odds on the direction of the break from consolidation. Additionally, the progression of the volume​ imbalance can help determine the proximity of the breakout. I also find volume​ delta and the number of divergences very useful to evaluate the strength of trends. In trends, I am looking for "slow and steady", i.e., relatively low volatility​ and pauses where price action doesn't look like world affairs are being reassessed. In my personal mythology, this type of trend is often more resilient than high-volatility breakouts, especially when volume​ balance confirms the general agreement of traders signaled by the low-volatility usually accompanying this type of trend. The volume​ action on pauses will often help me decide between aggressively taking profits, tightening a stop or going for a longer-term movement. As for reversals, they generally occur in high-volatility areas where entering trades is more expensive and riskier. While the identification of counter-trend reversals fascinates many traders to no end, they represent poor opportunities in my view. Volume​ imbalances often precede reversals, but I prefer to use volume​ delta information to identify the areas following reversals where I can confirm them and make relatively low-cost entries with better odds. On "Buy/Sell" Volume Buying or selling volume​ are misnomers, as every unit of volume​ transacted is both bought and sold by two different traders. While this does not keep me from using the terms, there is no such thing as “buy only” or “sell only” volume​. Trader lingo is riddled with peculiarities. Divergences The divergence detection method used here relies on a difference between the direction of a signal and the polarity (up/down) of a chart bar. When using the default "On Bar Balance" to detect divergences, however, only the bar's volume​ delta is used. You may wonder how there can be divergences between buying/selling volume​ information and price movement on one bar. This will sometimes be due to the calculation's shortcomings, but divergences may also occur in instances where because of order book structure, it takes less volume​ to increase the price of an asset than it takes to decrease it. As usual, divergences are points of interest because they reveal imbalances, which may or may not become turning points. To your pattern-hungry brain, the divergences displayed by this indicator will — as they do on other indicators — appear to often indicate turnarounds. My opinion is that reality is generally quite sobering and I have no reliable information that would tend to prove otherwise. Exercise caution when using them. Consequently, I do not share the overwhelming enthusiasm of traders in identifying bullish​/bearish​ divergences. For me, the best course of action when a divergence occurs is to wait and see what happens from there. That is the rationale underlying how my divergence levels work; they take note of a signal's level when a divergence occurs, and it's the signal's behavior from that point on that determines if the post-divergence action is bullish​/bearish​. Superfluity In "The Bed of Procrustes", Nassim Nicholas Taleb writes: To bankrupt a fool, give him information . This indicator can display lots of information. While learning to use a new indicator inevitably requires an adaptation period where we put it through its paces and try out all its options, once you have become used to it and decide to adopt it, rigorously eliminate the components you don't use and configure the remaining ones so their visual prominence reflects their relative importance in your analysis. I tried to provide flexible options for traders to control this indicator's visuals for that exact reason — not for window dressing. █  LIMITATIONS • This script uses a special characteristic of the `security()` function allowing the inspection of intrabars — which is not officially supported by TradingView.  It has the advantage of permitting a more robust calculation of volume​ delta than other methods on historical bars, but also has its limits. • Intrabar inspection only works on some chart timeframes: 3, 5, 10, 15 and 30 minutes, 1, 2, 3, 4, 6, and 12 hours, 1 day, 1 week and 1 month.  The script’s code can be modified to run on other resolutions. • When the difference between the chart’s timeframe and the intrabar timeframe is too great, runtime errors will occur. The Auto-Steps selection mechanisms should avoid this. • All volume​ is not created equally. Its source, components, quality and reliability will vary considerably with sectors and instruments.  The higher the quality, the more reliably volume​ delta information can be used to guide your decisions.  You should make it your responsibility to understand the volume​ information provided in the data feeds you use. It will help you make the most of volume​ delta. █  NOTES For traders • The Data Window shows key values for the indicator. • While this indicator displays some of the same information calculated in my Delta Volume Columns ,  I have elected to make it a separate publication so that traders continue to have a simpler alternative available to them. Both code bases will continue to evolve separately. • All gradients used in this indicator determine their brightness intensities using advances/declines in the signal—not their relative position in a pre-determined scale. • Volume​ delta being relative, by nature, it is particularly well-suited to Forex markets, as it filters out quite elegantly the cyclical volume​ data characterizing the sector. If you are interested in volume​ delta, consider having a look at my other "Delta Volume" indicators: • Delta Volume Realtime Action displays realtime volume​ delta and tick information on the chart. • Delta Volume Candles builds volume​​ delta candles on the chart. • Delta Volume Columns is a simpler version of this indicator. For coders • I use the `f_c_gradientRelativePro()` from the PineCoders Color Gradient Framework to build my gradients.  This function has the advantage of allowing begin/end colors for both the bull and bear colors. It also allows us to define the number of steps allowed for each gradient.  I use this to modulate the gradients so they perform optimally on the combination of the signal used to calculate advances/declines,  but also the nature of the visual component the gradient applies to. I use fewer steps for choppy signals and when the gradient is used on discrete visual components  such as volume​ columns or chart bars. • I use the PineCoders Coding Conventions for Pine to write my scripts. • I used functions modified from the PineCoders MTF Selection Framework for the selection of timeframes. █  THANKS TO: — The devs from TradingView's Pine and other teams, and the PineCoders who collaborate with them. They are doing amazing work,  and much of what this indicator does could not be done without their recent improvements to Pine. — A guy called Kuan who commented on a Backtest Rookies presentation of their Volume Profile indicator using a `for` loop.  This indicator started from the intrabar inspection technique illustrated in Kuan's snippet. — theheirophant , my partner in the exploration of the sometimes weird abysses of `security()`’s behavior at intrabar timeframes. — midtownsk8rguy , my brilliant companion in mining the depths of Pine graphics.
Pine Script® 인디케이터
LucF의
125
On Balance Volume with CrossOBV indicator with a few key changes that can turn it into a filter or trading indicator as-is. Volume calculation given a look-back to help clarify trends without smoothing lag Change the source (HLC3 indicates a little faster in backtesting) Smooth the signal if desired Moving average (MA) added for crossover indication in trend change MA can be either EMA or HMA** ** My personal use: EMA for trend filtering trades: Trade long signals if OBV is above the MA, trade short signals if OBV is below the MA. HMA for scalping and chop: Normally set the HMA to 20 or 15 and trade the crosses. Works on most time frames and generates a lot of noise. 5 min and 15 min seems best for me in day trading Example of trend trading using only the OBV-C and no other indicators, stops, or trailing stops: This could obviously be improved using stops, trailing stops, or other indicators to filter when to enter & exit trades or mitigate loss. Example of trading using the HMA and lower time frames with Elder's Force Index (EFI) used as a filter. Trade with both cross at or very near the same time. Winning trades in green:
Pine Script® 인디케이터
fauxlife의
3
Steps VThis indicator based on my volume MA that I design , it has 5 trend steps that are MTF length type (60,180,320 720,1440 min) by doing this it easy to see the real trend more easy my system is to start with 4 hour candle to see overall picture then we down to 1 hour etc.. I prefer 15 min candle so how this method work? the shorter trend will be at level 1,2,3 ' longer trend are level 4,5 if lets say level 1,2,3 is green then I go to buy if it also level 4 and 5 then its very bullish and I can increse up my bet vice versa for downtrend i like to use this setting on 15 min , it great for stocks (here I use 4 hour and 1 hour candles) also nice for forex if you want to see when the trend is changing direction I put other indicator which are not included in this script to make signal better but the concept is very similar here on 1 hour we see that level 1 red but all other are green so it still very bulish on Euro/USD 1 hour opposite
Pine Script® 인디케이터
RafaelZioni의
10
(JS) Ultimate RSISo my goal here was to combine all of my RSI ideas into a single indicator in order to make kind of a "Swiss Army Knife" version of the Relative Strength Index ... ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ So, let's begin with the first RSI indicator I made, which is the RSIDVW (Divergence/Volume Weighted); To rephrase my original post, the "divergence/volume weighted" portion is meant to expand upon the current RSI format by adding more variables into the equation. The standard RSI is based off one value that you select (open, close, OHLC4, HLC3, etc.) while this version takes three variables into account. The default setting is to have RSI normal without anything added to it (Divergence Weight = 0) 1st - it takes the standard variable that RSI normally uses. 2nd - it factors RSI divergence by taking the RSI change % and price change % to form a ratio. Using this ratio, I duplicated the RSI formula and created a divergence RS to be factored in with the standard price RS . 3rd - it takes Relative Volume and amplifies/weakens the move based upon volume confirmation. (So if Relative Volume for a price bar is 1.0, the RSI plot would be the same as it normally would) So to explain the parameters - Relative Volume Length: This uses the RV length you specify to determine spikes in volume (or lack of volume ), which then is added into the formula to influence the strength of the RSI move - RV x Divergence: This is how I calculated the original formula, but you can leave this unchecked to turn Relative Volume off, or apply elsewhere. - RV x RS: There's two sides, Divergence RS and Standard RS - these check marks allow you to select which part you prefer to be multiplied by Relative Volume . Checking neither turns off Relative Volume , while checking both amplifies its effects by placing it on both sides of the equation. -Divergence Weight: This controls how much the DVW portion of the formula influences the RSI plot. As I referred to earlier, default is 0 making RSI normal. The Scale is 0-2, so 1.0 would be the same as 50%. When I do have DVW on, I generally set it to 0.5 -SMA Divergence: To smooth, or not to smooth, that is the question. UJsing an SMA here is much smoother in my opinon, but leaving it unchecked runs it through an RMA the same way standard RSI is calculated. -Show Fractal Channel: This allows you to see the whole fractal channel around the RSI (This portion of the code, compliments of the original Ricardo Santos fractal script) ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ The next portion of the script is adding a "Slow RSI"... This is rather simple really, it allows you to add a second RSI plot so that you can watch for crossovers between fast and slow lines. -Slow RSI: This turns on the second RSI Plot. -Slow RSI Length: This determines the length of the second RSI Plot. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Pivot Point RSI was something a friend of mine requested I make which turned out pretty cool, I thought... It is also available in this indicator. -Pivot Points: Selecting this enables the rest of the pivot point related parts of the script If Pivot Points isn't selected, none of the following things will work -Plot Pivot: Plots the pivot point . -Plot S1/R1: Plots S1/R1. -Plot S2/R2: Plots S2/R2. -Plot S3/R3: Plots S3/R3. -Plot S4/R4: Plots S4/R4. -Plot S5/R5: Plots S5/R5. -Plot Halfway Points: Plots a line between each pivot . -Show Pivot Labels: Shows the proper label for each pivot . When using intraday charts, from a 15 minute interval or less the pivots are calculated based on a single days worth of price action, above that the distance expands. Here are the current resolutions Pivot Points will work with: Minutes - 1 , 2, 3, 5, 10, 13, 15, 20, 30, 39, 78, 130, 195 Hours - 1, 2, 3, 4, 5, 6 Daily Weekly Currently not available on seconds or monthly ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Background Colors Background Colors: I have six color schemes I created for this which can be toggled here (they can be edited). Gray Background for Dark Mode: Having this on looks much better when using dark mode on your charts. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Now finally the last portion, Fibonacci Levels -Fibonacci Levels: This is off, by default, which then uses the standard levels on RSI (30-50-70). When turned on, it removes these and marks fib levels from 0.146 through 0.886. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ So the quick rundown: Ultimate RSI contains "divergence/volume weighted" modifications, a slow RSI plot, pivot points , and Fibonacci levels all while auto-plotting divergence and having the trend illustrated in the background colors. RSI has always been my "go to" indicator, so I hope you all enjoy this as much as I do!
Pine Script® 인디케이터
J-Streak의
7