지금 시작

스크립트에서 "乌德勒支+VS+赫拉克勒斯"에 대해 찾기

Premium/Discount (Input)Used to show Contango or Backwardation in futures contracts vs spot price. You can input your own tickers so can technically can be used to compare anything. * In this example I'm showing Okex Quarterly contract vs Okex spot index price because it showcases it better. * If you are using this after 2019 the default setting will not work because I set it to Bitmex which does not currently have a "current contract in front" ticker available. It should be fairly self explanatory, but just ask below if you have any questions.
Pine Script® 인디케이터
Plumptoiletduck의
8
Volume Profile Free Ultra SLI (100 Levels Value Area VWAP) - RRBVolume Profile Free Ultra SLI by RagingRocketBull 2019 Version 1.0 This indicator calculates Volume Profile for a given range and shows it as a histogram consisting of 100 horizontal bars. This is basically the MAX SLI version with +50 more Pinescript v4 line objects added as levels. It can also show Point of Control (POC), Developing POC, Value Area/VWAP StdDev High/Low as dynamically moving levels. Free accounts can't access Standard TradingView Volume Profile, hence this indicator. There are several versions: Free Pro, Free MAX SLI, Free Ultra SLI, Free History. This is the Free Ultra SLI version. The Differences are listed below: - Free Pro: 25 levels, +Developing POC, Value Area/VWAP High/Low Levels, Above/Below Area Dimming - Free MAX SLI: 50 levels, 2x SLI modes for Buy/Sell or even higher res 150 levels - Free Ultra SLI: 100 levels, packed to the limit, 2x SLI modes for Buy/Sell or even higher res 300 levels - Free History: auto highest/lowest, historic poc/va levels for each session Features: - High-Res Volume Profile with up to 100 levels (line implementation) - 2x SLI modes for even higher res: 300 levels with 3x vertical SLI, 100 buy/sell levels with 2x horiz SLI - Calculate Volume Profile on full history - POC, Developing POC Levels - Buy/Sell/Total volume modes - Side Cover - Value Area, VAH/VAL dynamic levels - VWAP High/Low dynamic levels with Source, Length, StdDev as params - Show/Hide all levels - Dim Non Value Area Zones - Custom Range with Highlighting - 3 Anchor points for Volume Profile - Flip Levels Horizontally - Adjustable width, offset and spacing of levels - Custom Color for POC/VA/VWAP levels, Transparency for buy/sell levels WARNING: - Compilation Time: 1 min 20 sec Usage: - specify max_level/min_level/spacing (required) - select range (start_bar, range length), confirm with range highlighting - select volume type: Buy/Sell/Total - select mode Value Area/VWAP to show corresponding levels - flip/select anchor point to position the buy/sell levels - use Horiz Buy/Sell SLI mode with 100 or Vertical SLI with 300 levels if needed - use POC/Developing POC/VA/VWAP High/Low as S/R levels. Usually daily values from 1-3 days back are used as levels for the current day. SLI: use SLI modes to extend the functionality of the indicator: - Horiz Buy/Sell 2x SLI lets you view 100 Buy/Sell Levels at the same time - Vertical Max_Vol 3x SLI lets you increase the resolution to 300 levels - you need at least 2 instances of the indicator attached to the same chart for SLI to work 1) Enable Horiz SLI: - attach 2 indicator instances to the chart - make sure all instances have the same min_level/max_level/range/spacing settings - select volume type for each instance: you can have a buy/sell or buy/total or sell/total SLI. Make sure your buy volume instance is the last attached to be displayed on top of sell/total instances without overlapping. - set buy_sell_sli_mode to true for indicator instances with volume_type = buy/sell, for type total this is optional. - this basically tells the script to calculate % lengths based on total volume instead of individual buy/sell volumes and use ext offset for sell levels - Sell Offset is calculated relative to Buy Offset to stack/extend sell after buy. Buy Offset = Zero - Buy Length. Sell Offset = Buy Offset - Sell Length = Zero - Buy Length - Sell Length - there are no master/slave instances in this mode, all indicators are equal, poc/va levels are not affected and can work independently, i.e. one instance can show va levels, another - vwap. 2) Enable Vertical SLI: - attach the first instance and evaluate the full range to roughly determine where is the highest max_vol/poc level i.e. 0..20000, poc is in the bottom half (third, middle etc) or - add more instances and split the full vertical range between them, i.e. set min_level/max_level of each corresponding instance to 0..10000, 10000..20000 etc - make sure all instances have the same range/spacing settings - an instance with a subrange containing the poc level of the full range is now your master instance (bottom half). All other instances are slaves, their levels will be calculated based on the max_vol/poc of the master instance instead of local values - set show_max_vol_sli to true for the master instance. for slave instances this is optional and can be used to check if master/slave max_vol values match and slave can read the master's value. This simply plots the max_vol value - you can also attach all instances and set show_max_vol_sli to true in all of them - the instance with the largest max_vol should become the master Auto/Manual Ext Max_Vol Modes: - for auto vertical max_vol SLI mode set max_vol_sli_src in all slave instances to the max_vol of the master indicator: "VolumeProfileFree_MAX_RRB: Max Volume for Vertical SLI Mode". It can be tricky with 2+ instances - in case auto SLI mode doesn't work - assign max_vol_sli_ext in all slave instances the max_vol value of the master indicator manually and repeat on each change - manual override max_vol_sli_ext has higher priority than auto max_vol_sli_src when both values are assigned, when they are 0 and close respectively - SLI is disabled - master/slave max_vol values must match on each bar at all times to maintain proper level scale, otherwise slave's levels will look larger than they should relative to the master's levels. - Max_vol (red) is the last param in the long list of indicator outputs - the only true max_vol/poc in this SLI mode is the master's max_vol/poc. All poc/va levels in slaves will be irrelevant and are disabled automatically. Slaves can only show VWAP levels. - VA Levels of the master instance in this SLI mode are calculated based on the subrange, not the whole range and may be inaccurate. Cross check with the full range. WARNING! - auto mode max_vol_sli_src is experimental and may not work as expected - you can only assign auto mode max_vol_sli_src = max_vol once due to some bug with unhandled exception/buffer overflow in Tradingview. Seems that you can clear the value only by removing the indicator instance - sometimes you may see a "study in error state" error when attempting to set it back to close. Remove indicator/Reload chart and start from scratch - volume profile may not finish to redraw and freeze in an ugly shape after an UI parameter change when max_vol_sli_src is assigned a max_vol value. Assign it to close - VP should redraw properly, but it may not clear the assigned max_vol value - you can't seem to be able to assign a proper auto max_vol value to the 3rd slave instance - 2x Vertical SLI works and tested in both auto/manual, 3x SLI - only manual seems to work (you can have a mixed mode: 2nd instance - auto, 3rd - manual) Notes: - This code uses Pinescript v3 compatibility framework - This code is 20x-30x faster (main for cycle is removed) especially on lower tfs with long history - only 4-5 sec load/redraw time vs 30-60 sec of the old Pro versions - Instead of repeatedly calculating the total sum of volumes for the whole range on each bar, vol sums are now increased on each bar and passed to the next in the range making it a per range vs per bar calculation that reduces time dramatically - 100 levels consist of 50 main plot levels and 50 line objects used as alternate levels, differences are: - line objects are always shown on top of other objects, such as plot levels, zero line and side cover, it's not possible to cover/move them below. - all line objects have variable lengths, use actual x,y coords and don't need side cover, while all plot levels have a fixed length of 100 bars, use offset and require cover. - all key properties of line objects, such as x,y coords, color can be modified, objects can be moved/deleted, while this is not possible for static plot levels. - large width values cause line objects to expand only up/down from center while their length remains the same and stays within the level's start/end points similar to an area style. - large width values make plot levels expand in all directions (both h/v), beyond level start/end points, sometimes overlapping zero line, making them an inaccurate % length representation, as opposed to line objects/plot levels with area style. - large width values translate into different widths on screen for line objects and plot levels. - you can't compensate for this unwanted horiz width expansion of plot levels because width uses its own units, that don't translate into bars/pixels. - line objects are visible only when num_levels > 50, plot levels are used otherwise - Since line objects are lines, plot levels also use style line because other style implementations will break the symmetry/spacing between levels. - if you don't see a volume profile check range settings: min_level/max_level and spacing, set spacing to 0 (or adjust accordingly based on the symbol's precision, i.e. 0.00001) - you can view either of Buy/Sell/Total volumes, but you can't display Buy/Sell levels at the same time using a single instance (this would 2x reduce the number of levels). Use 2 indicator instances in horiz buy/sell sli mode for that. - Volume Profile/Value Area are calculated for a given range and updated on each bar. Each level has a fixed length. Offsets control visible level parts. Side Cover hides the invisible parts. - Custom Color for POC/VA/VWAP levels - UI Style color/transparency can only change shape's color and doesn't affect textcolor, hence this additional option - Custom Width - UI Style supports only width <= 4, hence this additional option - POC is visible in both modes. In VWAP mode Developing POC becomes VWAP, VA High and Low => VWAP High and Low correspondingly to minimize the number of plot outputs - You can't change buy/sell level colors from input (only transparency) - this requires 2x plot outputs => 2x reduces the number of levels to fit the max 64 limit. That's why 2 additional plots are used to dim the non Value Area zones - You can change level transparency of line objects. Due to Pinescript limitations, only discrete values are supported. - Inverse transp correlation creates the necessary illusion of "covered" line objects, although they are shown on top of the cover all the time - If custom lines_transp is set the illusion will break because transp range can't be skewed easily (i.e. transp 0..100 is always mapped to 100..0 and can't be mapped to 50..0) - transparency can applied to lines dynamically but nva top zone can't be completely removed because plot/mixed type of levels are still used when num_levels < 50 and require cover - transparency can't be applied to plot levels dynamically from script this can be done only once from UI, and you can't change plot color for the past length bars - All buy/sell volume lengths are calculated as % of a fixed base width = 100 bars (100%). You can't set show_last from input to change it - Range selection/Anchoring is not accurate on charts with time gaps since you can only anchor from a point in the future and measure distance in time periods, not actual bars, and there's no way of knowing the number of future gaps in advance. - Adjust Width for Log Scale mode now also works on high precision charts with small prices (i.e. 0.00001) - in Adjust Width for Log Scale mode Level1 width extremes can be capped using max deviation (when level1 = 0, shift = 0 width becomes infinite) - There's no such thing as buy/sell volume, there's just volume, but for the purposes of the Volume Profile method, assume: bull candle = buy volume, bear candle = sell volume P.S. I am your grandfather, Luke! Now, join the Dark Side in your father's steps or be destroyed! Once more the Sith will rule the Galaxy, and we shall have peace...
Pine Script® 인디케이터
RagingRocketBull의
112
Volume Profile Free MAX SLI (50 Levels Value Area VWAP) by RRBVolume Profile Free MAX SLI by RagingRocketBull 2019 Version 1.0 All available Volume Profile Free MAX SLI versions are listed below (They are very similar and I don't want to publish them as separate indicators): ver 1.0: style columns implementation ver 2.0: style histogram implementation ver 3.0: style line implementation This indicator calculates Volume Profile for a given range and shows it as a histogram consisting of 50 horizontal bars. It can also show Point of Control (POC), Developing POC, Value Area/VWAP StdDev High/Low as dynamically moving levels. Free accounts can't access Standard TradingView Volume Profile, hence this indicator. There are several versions: Free Pro, Free MAX SLI, Free History. This is the Free MAX SLI version. The Differences are listed below: - Free Pro: 25 levels, +Developing POC, Value Area/VWAP High/Low Levels, Above/Below Area Dimming - Free MAX SLI: 50 levels, packed to the limit, 2x SLI modes for Buy/Sell or even higher res 150 levels - Free History: auto highest/lowest, historic poc/va levels for each session Features: - High-Res Volume Profile with up to 50 levels (3 implementations) - 20-30x faster than the old Pro versions especially on lower tfs with long history - 2x SLI modes for even higher res: 150 levels with 3x vertical SLI, 50 buy/sell levels with 2x horiz SLI - Calculate Volume Profile on full history - POC, Developing POC Levels - Buy/Sell/Total volume modes - Side Cover - Value Area, VAH/VAL dynamic levels - VWAP High/Low dynamic levels with Source, Length, StdDev as params - Show/Hide all levels - Dim Non Value Area Zones - Custom Range with Highlighting - 3 Anchor points for Volume Profile - Flip Levels Horizontally - Adjustable width, offset and spacing of levels - Custom Color for POC/VA/VWAP levels and Transparency for buy/sell levels Usage: - specify max_level/min_level/spacing (required) - select range (start_bar, range length), confirm with range highlighting - select volume type: Buy/Sell/Total - select mode Value Area/VWAP to show corresponding levels - flip/select anchor point to position the buy/sell levels - use Horiz SLI mode for 50 Buy/Sell or Vertical SLI for 150 levels if needed - use POC/Developing POC/VA/VWAP High/Low as S/R levels. Usually daily values from 1-3 days back are used as levels for the current day. SLI: - use SLI modes to extend the functionality of the indicator: - Horiz Buy/Sell 2x SLI lets you view 50 Buy/Sell Levels at the same time - Vertical Max_Vol 3x SLI lets you increase the resolution to 150 levels - you need at least 2 instances of the indicator attached to the same chart for SLI to work 1) Enable Horiz SLI: - attach 2 indicator instances to the chart - make sure all instances have the same min_level/max_level/range/spacing settings - select volume type for each instance: you can have a buy/sell or buy/total or sell/total SLI. Make sure your buy volume instance is the last attached to be displayed on top of sell/total instances without overlapping. - set buy_sell_sli_mode to true for indicator instances with volume_type = buy/sell, for type total this is optional. - this basically tells the script to calculate % lengths based on total volume instead of individual buy/sell volumes and use ext offset for sell levels - Sell Offset is calculated relative to Buy Offset to stack/extend sell after buy. Buy Offset = Zero - Buy Length. Sell Offset = Buy Offset - Sell Length = Zero - Buy Length - Sell Length - there are no master/slave instances in this mode, all indicators are equal, poc/va levels are not affected and can work independently, i.e. one instance can show va levels, another - vwap. 2) Enable Vertical SLI: - attach the first instance and evaluate the full range to roughly determine where is the highest max_vol/poc level i.e. 0..20000, poc is in the bottom half (third, middle etc) or - add more instances and split the full vertical range between them, i.e. set min_level/max_level of each corresponding instance to 0..10000, 10000..20000 etc - make sure all instances have the same range/spacing settings - an instance with a subrange containing the poc level of the full range is now your master instance (bottom half). All other instances are slaves, their levels will be calculated based on the max_vol/poc of the master instance instead of local values - set show_max_vol_sli to true for the master instance. for slave instances this is optional and can be used to check if master/slave max_vol values match and slave can read the master's value. This simply plots the max_vol value - you can also attach all instances and set show_max_vol_sli to true in all of them - the instance with the largest max_vol should become the master Auto/Manual Ext Max_Vol Modes: - for auto vertical max_vol SLI mode set max_vol_sli_src in all slave instances to the max_vol of the master indicator: "VolumeProfileFree_MAX_RRB: Max Volume for Vertical SLI Mode". It can be tricky with 2+ instances - in case auto SLI mode doesn't work - assign max_vol_sli_ext in all slave instances the max_vol value of the master indicator manually and repeat on each change - manual override max_vol_sli_ext has higher priority than auto max_vol_sli_src when both values are assigned, when they are 0 and close respectively - SLI is disabled - master/slave max_vol values must match on each bar at all times to maintain proper level scale, otherwise slave's levels will look larger than they should relative to the master's levels. - Max_vol (red) is the last param in the long list of indicator outputs - the only true max_vol/poc in this SLI mode is the master's max_vol/poc. All poc/va levels in slaves will be irrelevant and are disabled automatically. Slaves can only show VWAP levels. - VA Levels of the master instance in this SLI mode are calculated based on the subrange, not the whole range. Cross check with the full range. WARNING! - auto mode max_vol_sli_src is experimental and may not work as expected - you can only assign auto mode max_vol_sli_src = max_vol once due to some bug with unhandled exception/buffer overflow in Tradingview. Seems that you can clear the value only by removing the indicator instance - sometimes you may see a "study in error state" error when attempting to set it back to close. Remove indicator/Reload chart and start from scratch - volume profile may not finish to redraw and freeze in an ugly shape after an UI parameter change when max_vol_sli_src is assigned a max_vol value. Assign it to close - VP should redraw properly, but it may not clear the assigned max_vol value - you can't seem to be able to assign a proper auto max_vol value to the 3rd slave instance - 2x Vertical SLI works and tested in both auto/manual, 3x SLI - only manual seems to work Notes: - This code is 20x-30x faster (main for cycle is removed) especially on lower tfs with long history - only 2-3 sec load/redraw time vs 30-60 sec of the old Pro versions - Instead of repeatedly calculating the total sum of volumes for the whole range on each bar, vol sums are now increased on each bar and passed to the next in the range making it a per range vs per bar calculation that reduces time dramatically - hist_base for levels still results is ugly redraw - if you don't see a volume profile check range settings: min_level/max_level and spacing, set spacing to 0 (or adjust accordingly based on the symbol's precision, i.e. 0.00001) - you can view either of Buy/Sell/Total volumes, but you can't display Buy/Sell levels at the same time using a single instance (this would 2x reduce the number of levels). Use 2 indicator instances in horiz buy/sell sli mode for that. - Volume Profile/Value Area are calculated for a given range and updated on each bar. Each level has a fixed length. Offsets control visible level parts. Side Cover hides the invisible parts. - Custom Color for POC/VA/VWAP levels - UI Style color/transparency can only change shape's color and doesn't affect textcolor, hence this additional option - Custom Width - UI Style supports only width <= 4, hence this additional option - POC is visible in both modes. In VWAP mode Developing POC becomes VWAP, VA High and Low => VWAP High and Low correspondingly to minimize the number of plot outputs - You can't change buy/sell level colors from input (only plot transparency) - this requires 2x plot outputs => 2x reduces the number of levels to fit the max 64 limit. That's why 2 additional plots are used to dim the non Value Area zones - All buy/sell volume lengths are calculated as % of a fixed base width = 100 bars (100%). You can't set show_last from input to change it - There's no such thing as buy/sell volume, there's just volume, but for the purposes of the Volume Profile method, assume: bull candle = buy volume, bear candle = sell volume P.S. Gravitonium Levels Are Increasing. Unobtainium is nowhere to be found! Links on Volume Profile and Value Area calculation and usage: www.tradingview.com stockcharts.com onlinelibrary.wiley.com
Pine Script® 인디케이터
RagingRocketBull의
25
ST_Trend_ReversalSTRONG TREND REVERSAL INDICATOR The code is the percentage difference between the spot price of a given financial asset and its 200-day MA of that period. My standard setup is Daily, and I think it's got very good predictive power at that timeframe. It can be read in two ways: 1. Values extremely above or below the 200-period MA present chances of buying/selling agains the prevailing trend. 2. Values closely above or below the 200-period MA are make-or-break market periods, where a medium-term trend becomes evident. Breaks above or below the MA are associated with strong chances of directional movements. But it's not fool-proof as false breaks have become commonplace nowadays. Other way to use it is as confirmation of breakdowns: For example, an asset that loses its 200-day MA and then can't rally above it becomes exposed to steep losses afterwards. It's also helpful to use in volatility trading: the closer the asset goes to its MA, the lower goes implied vol, and thus better opportiunities to be long volatility on those occasions where direction is hard to predict. STRI = close/(200dMA) Values over 100 indicate percentage premiums of spot vs its moving average. Values below indicate percentage discounts of spot vs its moving average.
Pine Script® 인디케이터
Daniel_Urdaneta의
2
Ersoy-intersection(Kesisme)-Update-1website: www.ersoytoptas.com Newspaper : tr.investing.com hi , Friends i wanna be someone who wants to help everyone updated my script he published some time ago. What happened? * intersection When ever Bar Color Yellow Be * Alarms to be more comprehensible * Short and Long Days Choosing a Opportunities * Source Opportunities All Charts Usable( Example ;15,30,60 ... vs) and ALL MARKETS ( Stocks , forex , ... vs) i strive to improve further Easy to get
Pine Script® 인디케이터
Lemnos의
8
ES Gap FillES Gap Fill — Close/Offsets, Half-Gap & 09:30 Table ES Gap Fill plots the prior RTH 4:00 PM close, optional ±10 / ±20 point offset bands, the 09:30 RTH open, and the half-gap (midpoint between the prior close and today’s open). It also includes a compact table that shows: • Prev Close (captured from ES 4:00 PM close) • Open (either RTH 09:30 open or the Daily open — your choice) • Δ Open − Prev (points) • Last (current price) • Δ Last − Prev (points) This is built for ES (S&P 500 futures), but it’ll display on any symbol/chart timeframe. ⸻ What it plots • Prev Close line (RTH close at 16:00 ET / 15:00 CT) and a label. • ±10 / ±20 point offset lines relative to the prior close (optional). • 09:30 RTH Open line with label when that bar arrives. • Half-Gap line (average of prior close and today’s open). • Dynamic preview line (+20 or −20) after the close (optional), which switches sides as price moves around the prior close, then automatically turns off at 09:30. • ES Table (top-right) showing differences vs the previous close in points (and current last). ⸻ Inputs • Show Close/±10/±20 + Half-Gap: master toggle for all lines/labels. • Show ES Table: show/hide the numeric table. • Open Hour (CST): hour for the 09:30 RTH open in your chart’s timezone (default 8 for CST → 09:30 ET). • First Offset (+/−): default 10.0 points. • Second Offset (+/−): default 20.0 points. • Line Extension (bars): how far to extend each line to the right. • Use RTH 09:30 open (else Daily open): table uses the first 09:30 bar’s open when enabled. If disabled, it uses the instrument’s Daily open instead (for many futures that’s ~17:00 CT). ⸻ How it works (timing & non-repainting) • 4:00 PM ET (15:00 CT): captures the RTH close and draws the Prev Close line (+ optional ±20 preview). • 09:30 ET (08:30/08:00/… depending on your input): captures the RTH open, draws the Open and Half-Gap lines, and deletes the preview line. • All detections use edge-guards, so on sub-minute charts (e.g., 30-sec) events trigger once for the first bar of the minute. • The table updates on every bar. The “Open” column populates after 09:30 (or immediately at Daily open if you choose that option). ⸻ Quick start 1. Add to chart on ES or the symbol you trade intraday. 2. In Inputs: • Leave Open Hour (CST) at 8 if your chart is Central Time and you want 09:30 ET as the RTH open. • Adjust ±10 / ±20 to your own offsets if needed. • Toggle Show ES Table on to see the live diffs. 3. If your chart’s timezone isn’t CST, either: • Change your chart timezone to America/Chicago, or • Adjust Open Hour (CST) so 09:30 ET is represented correctly for your chart’s timezone. 4. Optional: switch Use RTH 09:30 open off to compare against the Daily open instead (useful for overnight context). ⸻ Reading the visuals • Red line = Prev Close. • Blue line = RTH Open. • Yellow dotted = Half-Gap. • Teal lines = offsets (±10 / ±20). • Table cells turn green when above prev close and red when below. ⸻ Tips • If you only want the table, toggle off Show Close/±10/±20 + Half-Gap. • Want different offsets (e.g., ±5/±15)? Change First/Second Offset values. • On very low timeframes, if you ever see a duplicate open on the first two bars of 09:30, ensure the script’s 09:30 trigger is using the edge-detected version (this script already does). • Futures symbols with non-standard Daily sessions may have Daily opens that don’t align with RTH. Use the Use RTH 09:30 open option for consistency with US index RTH. ⸻ Known limitations • If your chart timezone doesn’t match the Open Hour (CST) assumption, timings can drift. Adjust the input or set your chart to America/Chicago for 1:1 behavior. • Some brokers/symbols define the “daily” session differently. If your Daily open/close looks off, prefer the RTH option. ⸻ Disclaimers This is a visual aid, not trading advice. Test on a demo chart and confirm behavior with your broker’s session times before using live. ⸻ Credits Original concept & enhancements by sv650sjames (Gap Fill logic, dynamic previews, and ES table polish).
Pine Script® 인디케이터
sv650sjames의
USD Session 8FX - LDN & NY (TF-invariant, Live + Table) full verWhat it is A session-based USD Bias Index for: London: 08:00–08:45 New York: 15:30–16:00 or 15:30–16:15 It blends 8 instruments into a single Score: EURUSD, GBPUSD, AUDUSD, NZDUSD, USDCHF, USDCAD, USDJPY, XAUUSD. Score > 0 ⇒ USD strength, Score < 0 ⇒ USD weakness. How it works At session start, it stores a “start” price for each symbol; during the window it updates the “end” price. It computes each symbol’s return: end / start − 1. Returns are multiplied by weights: anti-USD (EUR/GBP/AUD/NZD/XAU) have negative weights; USD-base (JPY/CHF/CAD) have positive weights. The sum of weighted returns is normalized by the sum of absolute weights → a single Score that is comparable day to day. Powerful options included Min |Score| to trade (e.g., 0.12): builds a flag isValidBias so you only act when the signal is strong enough (filters chop/noise). ATR normalization (toggle + length): divides each return by its symbol’s ATR, preventing one volatile instrument (often XAUUSD) from dominating the basket. Live |Score| alert (during the session): notifies when |Score| crosses the threshold—use it as a heads-up, not the final entry trigger. Top-2 drivers: highlights the two largest absolute contributors (“TOP” badge in the table). These are the main movers of the current bias. Anti-USD vs USD-base plot (optional): a second plot showing the average of anti-USD and USD-base returns (after normalization, before weights). Theme-aware table (Light/Dark): readable on white or dark charts. Dynamic line color: green when Score ≥ 0, red when Score < 0. Close label: stamps “USD Strong/Weak + time window” at session end. What you see Score line: trend of USD bias (up = strengthening, down = weakening). Session shading: background while the window is active. Live table with: % Chg (return), W (weight), Contr. (return × weight) for each instrument, TOP-2 highlighted, verdict row (USD Strong/Weak), Score, window, status (LIVE/CLOSED/WAIT), a threshold row showing |Score| / threshold and whether ATRnorm is ON/OFF. Alerts At session close: “USD Strong – session close” if Score ≥ 0 “USD Weak – session close” if Score < 0 During session (live): alerts when |Score| crosses above or below your threshold. How to use it (practical workflow) Wait for session close (08:45 LDN, 16:00 or 16:15 NY) so the Score freezes. Check that |Score| ≥ threshold (you’ll see OK in the table). Trade with the bias: USD Strong → favor shorts on anti-USD or longs on USD-base. USD Weak → the opposite. Timing: use your breaker + retest setup (ideally on a TOP-2 instrument). Risk: stop beyond the retest; manage in R-multiples. Use the live alerts only as early warnings during the window—entries are cleaner after the close if the bias persists. Suggested starting settings Min |Score| to trade: 0.12–0.15 ATR length: 14 (then tune) Live |Score| alert: ~0.15 Table theme: Light for white charts; Dark for dark charts If you want, I can also give you a one-page pre-trade checklist that matches this logic (bias check, TOP-2, structure, risk, news).
Pine Script® 인디케이터
salvatorepierro1989의
USD Session 8FX - LDN & NY (TF-invariant, Live + Table)What this indicator does It builds a session-based USD strength score from 8 instruments (EURUSD, GBPUSD, AUDUSD, NZDUSD, USDCHF, USDCAD, USDJPY, XAUUSD). For each session (London or New York) it measures the % change from the session start and combines them with your custom weights to output a single value: Score > 0 → USD Strong Score < 0 → USD Weak How it works (logic) Sessions: Choose London (08:00–08:45) or New York (15:30–16:00 / 16:15). Times are in Europe/Tirane. TF-invariant: The session boundary is anchored with a reference TF (refTF, default 1 minute). That makes results consistent on any chart timeframe. Weights & sign convention: Anti-USD pairs (EURUSD, GBPUSD, AUDUSD, NZDUSD, XAUUSD) use negative weights → when these rise, they subtract from the score (USD weaker). USD-base pairs (USDCHF, USDCAD, USDJPY) use positive weights → when these rise, they add to the score (USD stronger). Live vs Close: Live mode updates the score every bar while the session is open. If Live is off, it only computes at session close and prints a label (“USD Strong/Weak”). Normalization: The final score is the weighted sum divided by the sum of absolute weights, so it’s scale-stable if you tweak weights. On-chart UI Plot: A single line (“Score”) above/below zero. Background: Light gray during the active session window. Table: Per pair you see % change, Weight, and Weighted contribution, plus a bottom “verdict” cell (USD Strong/Weak) and the selected window text (e.g., 15:30–16:15). Alerts (constant messages): At session close it can trigger “USD Strong – session close” “USD Weak – session close” How to use it Select London or New York, and (for NY) the end time (16:00 or 16:15). Keep refTF = 1 for robust session anchoring. Read the verdict at session close; then apply your entry model (e.g., breaker + retest) in the favored direction. Customization tips Nudge weights to reflect your view (e.g., slightly higher USDCHF/USDCAD for NY sensitivity, or lower XAUUSD if it over-influences). If your broker doesn’t support FX_IDC:XAUUSD, switch the gold symbol (e.g., OANDA:XAUUSD). Notes / limitations Alerts require constant messages (Pine rule), so the message text can’t auto-include the chosen window. Make sure your chart’s timezone aligns with Europe/Tirane if you want the session windows to match your local clock.
Pine Script® 인디케이터
salvatorepierro1989의
USD 15:30 Window 8FX (TF-invariant, Live + Table)Your indicator builds a session-based USD strength index from 8 instruments (EURUSD, GBPUSD, AUDUSD, NZDUSD, USDCHF, USDCAD, USDJPY, XAUUSD). It measures each pair’s % change from the session start and combines them with custom weights to produce one score: positive = USD strong, negative = USD weak. How it works Sessions: Toggle London (08:00–08:45) or New York (15:30–16:00 / 16:15) in Europe/Tirane time. TF-invariant: It anchors the session open on a 1-minute reference timeframe (refTF), so results are consistent on any chart TF. Weights & signs: Anti-USD pairs (EURUSD, GBPUSD, AUDUSD, NZDUSD, XAUUSD) use negative weights; USD-base pairs (USDCHF, USDCAD, USDJPY) use positive weights. This makes the combined score align with USD strength/weakness. Live vs close: In Live mode the score updates every minute during the window; otherwise it freezes at session end and prints a verdict label. Table & alerts: A compact table displays each pair’s % change, its weight, and weighted contribution, plus the final verdict. Alerts fire at session close for “USD Strong/Weak.” Use it Read the verdict at the session close, then apply your entry logic (e.g., breaker + retest) in the favored direction.
Pine Script® 인디케이터
salvatorepierro1989의
Tristan's W%R StrategyOverview: This strategy uses the raw Williams %R oscillator to automatically generate buy and sell signals based on overbought and oversold levels. It is session-aware, allowing you to restrict trades to specific market hours (New York, London, or Asia). Key Features: Buy Signal: Fires whenever the raw Williams %R is at or below the oversold level (default −100). Sell Signal: Fires whenever the raw Williams %R is at or above the overbought level (default 0). Session Filtering: Only triggers trades during the selected session (All, New York, London, or Asia). Pyramiding: Allows multiple trades to stack, so every qualifying signal results in a new trade. Alerts: Optional alerts for automation via webhook or broker integration. Session Highlight: Background shading indicates when the selected session is active. How to Use: Set the Williams %R length, overbought, and oversold levels to match your trading style. Select the session you want the strategy to be active in (New York, London, or Asia). Enable alerts if you plan to automate trades with an API. Add the strategy to your chart. It will execute trades automatically whenever the raw %R meets the configured thresholds during the selected session. Adjust pyramiding if you want to limit the number of stacked trades per session. Note: This script uses the raw W%R signal vs the smoothed one because I found it to be more accurate for automated trading. Every qualifying signal results in a trade, even if positions are already open.
Pine Script™ 전략
OhRayOhRay의
1
Scalper Pro Pattern Recognition & Price Action OVERVIEW Scalper Pro is a comprehensive multi-timeframe trading indicator that combines Smart Money Concepts (SMC) with traditional technical analysis to provide scalpers and day traders with high-probability entry and exit signals. This indicator integrates multiple analytical frameworks into a unified visual system designed specifically for short-term trading strategies. ORIGINALITY & PURPOSE What Makes This Script Original This script is not a simple mashup of existing indicators. Instead, it represents a carefully orchestrated integration of complementary analytical methods that work together to solve a specific problem: identifying high-probability scalping opportunities in volatile markets. The unique value proposition: Adaptive Trend Filtering System - Combines a customized SuperTrend algorithm with dual-period range filters (Cirrus Cloud) and Hull Moving Average trend cloud to create a three-layer trend confirmation system Smart Money Concepts Integration - Incorporates institutional trading concepts (Order Blocks, Fair Value Gaps, Break of Structure) with retail technical indicators for a complete market structure view Dynamic Risk Management - Automatically calculates stop-loss and take-profit levels based on ATR volatility, providing objective position sizing ADX-Based Market Regime Detection - Identifies ranging vs. trending markets through ADX analysis with visual bar coloring to prevent whipsaws during consolidation Why Combine These Specific Components Each component addresses a specific weakness in scalping: SuperTrend provides the primary directional bias but can generate false signals in ranging markets Range Filters smooth out noise and confirm trend direction, reducing SuperTrend false positives ADX Analysis prevents trading during low-volatility consolidation when most indicators fail SMC Elements identify institutional activity zones where price is likely to react strongly ATR-Based Risk Management adapts position sizing to current volatility conditions The synergy creates a system where signals are only generated when multiple confirmation layers align, significantly reducing false signals common in single-indicator approaches. HOW IT WORKS Core Calculation Methodology 1. SuperTrend Signal Generation The script uses a modified SuperTrend algorithm with the following calculation: ATR = Average True Range (default: 10 periods) Factor = 7 (default sensitivity multiplier) Upper Band = Source + (Factor × ATR) Lower Band = Source - (Factor × ATR) Directional Logic: When price crosses above SuperTrend → Bullish signal When price crosses below SuperTrend → Bearish signal SuperTrend value is plotted as dynamic support/resistance Key Modification: The sensitivity parameter (nsensitivity * 7) allows users to adjust the aggressiveness of trend detection without changing the core ATR calculation. 2. Range Filter System (Cirrus Cloud) The Range Filter uses a smoothed range calculation to filter out market noise: Smooth Range Calculation: WPER = (Period × 2) - 1 AVRNG = EMA(|Price - Price |, Period) Smooth Range = EMA(AVRNG, WPER) × Multiplier Two-Layer System: Layer 1: 22-period with 6x multiplier (broader trend) Layer 2: 15-period with 5x multiplier (tighter price action) Visual Output: The space between these two filters is colored: Green fill = Bullish trend (Layer 1 > Layer 2) Red fill = Bearish trend (Layer 1 < Layer 2) This creates a "cloud" that expands during strong trends and contracts during consolidation. 3. ADX Market Regime Detection Calculation: +DM = Positive Directional Movement -DM = Negative Directional Movement True Range = RMA of True Range (15 periods) +DI = 100 × RMA(+DM, 15) / True Range -DI = 100 × RMA(-DM, 15) / True Range ADX = 100 × RMA(|+DI - -DI| / (+DI + -DI), 15) Threshold System: ADX < Threshold (default 15) = Ranging market → Bar color changes to purple ADX > Threshold = Trending market → Normal bar coloring applies Purpose: This prevents taking trend-following signals during sideways markets where most indicators produce whipsaws. 4. Smart Money Concepts (SMC) Integration Order Blocks (OB): Identified using swing high/low detection with customizable pivot length Bullish OB: Last down-close candle before bullish Break of Structure (BOS) Bearish OB: Last up-close candle before bearish BOS Extended forward until price breaks through them Fair Value Gaps (FVG): Detected when a three-candle gap exists: Bullish FVG: Low > High Bearish FVG: High < Low Filtered by price delta percentage to ensure significant gaps Displayed as boxes that delete when price fills the gap Break of Structure (BOS) vs. Change of Character (CHoCH): BOS = Price breaks the previous structural high/low in the current trend direction CHoCH = Price breaks structure in the opposite direction (potential trend reversal) Both internal (minor) and swing (major) structures are tracked Equal Highs/Lows (EQH/EQL): Detected when consecutive swing highs/lows are within ATR threshold Often indicates liquidity pools that price may sweep before reversing 5. ATR-Based Risk Management Calculation: ATR Band = ATR(14) × Risk Multiplier (default 3%) Stop Loss = Entry - ATR Band (for longs) or Entry + ATR Band (for shorts) Take Profit Levels: TP1 = Entry + (Entry - Stop Loss) × 1 TP2 = Entry + (Entry - Stop Loss) × 2 TP3 = Entry + (Entry - Stop Loss) × 3 Dynamic Labels: Stop loss and take profit levels are automatically calculated and displayed as labels on the chart when new signals trigger. 6. Hull Moving Average Trend Cloud HMA = WMA(2 × WMA(Close, Period/2) - WMA(Close, Period), sqrt(Period)) Period = 600 bars (long-term trend) The HMA provides a smoothed long-term trend reference that's more responsive than traditional moving averages while filtering out short-term noise. HOW TO USE THE INDICATOR Entry Signals Primary Buy Signal: SuperTrend changes to green (price crosses above) ADX shows market is NOT ranging (bars are NOT purple) Price is within or near a bullish Order Block OR bullish FVG Cirrus Cloud shows green fill (Layer 1 > Layer 2) Primary Sell Signal: SuperTrend changes to red (price crosses below) ADX shows market is NOT ranging Price is within or near a bearish Order Block OR bearish FVG Cirrus Cloud shows red fill (Layer 1 < Layer 2) Confirmation Layers Higher Probability Trades Include: Bullish/Bearish BOS in the same direction as signal Equal highs/lows being swept before entry Price respecting premium/discount zones (above/below equilibrium) Multiple timeframe alignment (use MTF settings) Exit Strategy The indicator provides three take-profit levels: TP1: Conservative target (1:1 risk-reward) TP2: Moderate target (2:1 risk-reward) TP3: Aggressive target (3:1 risk-reward) Suggested Exit Approach: Close 1/3 position at TP1 Move stop to breakeven Close 1/3 position at TP2 Trail remaining position or exit at TP3 Risk Management Stop Loss: Use the ATR-based stop loss level displayed on chart Alternatively, use percentage-based stop (adjustable in settings) Never risk more than 1-2% of account per trade Position Sizing: Position Size = (Account Risk $) / (Entry Price - Stop Loss Price) CUSTOMIZABLE SETTINGS Core Parameters Buy/Sell Signals: Toggle signals on/off Adjust SuperTrend sensitivity (0.5 - 2.0) Risk Management: Show/hide TP/SL levels ATR period (default: 14) Risk percentage (default: 3%) Number of decimal places for price labels Trend Features: Cirrus Cloud display toggle Range filter periods (x1, x2, x3, x4) Hull MA length for trend cloud Smart Money Concepts: Order Block settings (swing length, display count) Fair Value Gap parameters (auto-threshold, extend length) Structure detection (internal vs swing) EQH/EQL threshold ADX Settings: ADX length (default: 15) Sideways threshold (10-30, default: 15) Bar color toggle Display Options: Previous day/week/month high/low levels Premium/Discount/Equilibrium zones Trend candle coloring (colored or monochrome) BEST PRACTICES & TRADING TIPS Optimal Use Cases Scalping on lower timeframes (1m, 5m, 15m) Rapid entry/exit with clear TP levels ADX filter prevents choppy market entries Day trading on medium timeframes (30m, 1H) Stronger trend confirmation Better risk-reward ratios Swing trading entries on higher timeframes (4H, Daily) Higher-probability structural setups Larger ATR-based stops accommodate volatility Market Conditions Best Performance: Trending markets with clear directional bias Post-news volatility with defined structure Markets respecting support/resistance levels Avoid Trading When: ADX indicator shows purple bars (ranging market) Multiple conflicting signals across timeframes Major news events without clear price structure Low volume periods (market open/close) Common Mistakes to Avoid Ignoring the ADX filter - Taking signals during ranging markets leads to whipsaws Not waiting for confirmation - Enter only when multiple layers align Overtrading - Fewer high-quality setups outperform many mediocre ones Ignoring risk management - Always use the calculated stop losses Fighting the trend - Trade WITH the SuperTrend and Cirrus Cloud direction TECHNICAL SPECIFICATIONS Indicator Type: Overlay (plots on price chart) Calculation Resources: Max labels: 500 Max lines: 500 Max boxes: 500 Max bars back: 500 Pine Script Version: 5 Compatible Timeframes: All timeframes (optimized for 1m to 1D) Compatible Instruments: Forex pairs Crypto assets Stock indices Individual stocks Commodities THEORETICAL FOUNDATION Trend-Following Concepts This indicator is based on the principle that markets trend more often than they range, and that trends tend to persist. The SuperTrend component captures this momentum while the range filters prevent premature entries during pullbacks. Smart Money Theory The SMC elements are based on the concept that institutional traders (banks, hedge funds) leave footprints in the form of: Order Blocks: Areas where large orders were placed Fair Value Gaps: Inefficient price movements that may be revisited Liquidity Sweeps: Stop hunts before continuation (EQH/EQL) Volatility-Based Position Sizing Using ATR for stop-loss placement ensures that stop distances adapt to current market conditions: Tight stops in low volatility (avoids excessive risk) Wider stops in high volatility (avoids premature stop-outs) PERFORMANCE EXPECTATIONS Realistic Expectations Win Rate: Expected: 45-55% (trend-following systems rarely exceed 60%) Higher win rates on trending days Lower win rates during consolidation (even with ADX filter) Risk-Reward Ratio: Target: 1.5:1 minimum (TP2) Achievable: 2:1 to 3:1 on strong trends Drawdowns: Normal: 10-15% of account during choppy periods Maximum: Should not exceed 20% with proper risk management Optimization Tips Backtesting Recommendations: Test on at least 1 year of historical data Include different market conditions (trending, ranging, volatile) Adjust SuperTrend sensitivity per instrument Optimize ADX threshold for your specific market Record trades to identify personal execution errors FREQUENTLY ASKED QUESTIONS Q: Can I use this for automated trading? A: The indicator provides signals, but you'll need to code a strategy script separately for automation. The signals can trigger alerts that connect to trading bots. Q: Why do I see conflicting signals? A: This is normal during transition periods. Wait for all confirmation layers to align before entering. Q: How often should I expect signals? A: Depends on timeframe and market conditions. On 5m charts during trending markets: 3-7 quality setups per session. Q: Can I use only some features? A: Yes, all components can be toggled on/off. However, the system works best with all confirmations active. Q: What's the difference between internal and swing structures? A: Internal = minor price structures (smaller pivots). Swing = major price structures (larger pivots). Both provide different levels of confirmation. DISCLAIMER This indicator is a tool for technical analysis and should not be the sole basis for trading decisions. Past performance does not guarantee future results. Always: Use proper risk management Test on demo accounts first Never risk more than you can afford to lose Combine with fundamental analysis when applicable Understand that no indicator is 100% accurate License: Mozilla Public License 2.0 Author: DrFXGOD VERSION HISTORY & UPDATES Initial Release - Version 1.0 Integrated SuperTrend, Range Filters, ADX, SMC concepts ATR-based risk management Multi-timeframe support Customizable visual elements SUPPORT & DOCUMENTATION For questions, suggestions, or bug reports, please comment on the script page or contact the author through TradingView. Additional Resources: Smart Money Concepts: Research ICT (Inner Circle Trader) materials ATR and Volatility: Refer to Wilder's original ATR documentation SuperTrend Indicator: Study original SuperTrend strategy papers
Pine Script® 인디케이터
DrFXGOD의
1
Volume Profile Pro Volume Profile Pro is an advanced market analysis tool that displays trading activity distribution across price levels. It identifies key market structure levels including Point of Control (POC), Value Area High (VAH), and Value Area Low (VAL) based on actual volume data. ORIGINALITY & VALUE: This indicator provides unique volume distribution analysis with intelligent timeframe detection, real-time profile development, and professional visualization. Unlike basic volume indicators, it calculates precise volume distribution across price levels and identifies high-volume nodes that act as dynamic support/resistance zones. KEY FEATURES: Smart Timeframe Detection - Automatically uses chart timeframe with manual override option Value Area Calculation - Customizable percentage (68% recommended for standard deviation) Real-time Profile Updates - Live developing profile during active trading sessions Session Awareness - Adjusts for regular vs extended trading hours Professional Visualization - Clean, customizable display with multiple placement options Advanced Alert System - POC breach detection with multiple extension options CORE COMPONENTS: Point of Control (POC) - Price level with highest traded volume (market consensus price) Value Area (VA) - Price range containing specified percentage of total volume Value Area High (VAH) - Upper boundary of value area (Orange) Value Area Low (VAL) - Lower boundary of value area (Bright Blue) Volume Distribution - Visual histogram showing volume concentration at price levels TRADING APPLICATIONS: Dynamic Support/Resistance - POC and Value Area act as evolving S/R levels Breakout Confirmation - Volume-backed breakouts from Value Area Mean Reversion - Trading opportunities at Value Area boundaries Market Structure - Understanding volume distribution and market acceptance Risk Management - Using Value Area for strategic stop placement SETUP INSTRUCTIONS: Timeframe: Uses current chart timeframe by default (customizable in settings) Value Area: Set to 68% for standard market profile or adjust based on volatility Profile Placement: Choose Left for historical analysis or Right for current session Alerts: Enable POC breach alerts for real-time trading signals Visualization: Customize colors and widths to match your trading style This indicator provides institutional-grade market structure analysis in an accessible format, helping traders identify high-probability trading zones based on actual volume data rather than just price action.
Pine Script® 인디케이터
CARLOSVIZCARRA17의
Luxy Adaptive MA Cloud - Trend Strength & Signal Tracker V2Luxy Adaptive MA Cloud - Professional Trend Strength & Signal Tracker Next-generation moving average cloud indicator combining ultra-smooth gradient visualization with intelligent momentum detection. Built for traders who demand clarity, precision, and actionable insights. ═══════════════════════════════════════════════ WHAT MAKES THIS INDICATOR SPECIAL? ═══════════════════════════════════════════════ Unlike traditional MA indicators that show static lines, Luxy Adaptive MA Cloud creates a living, breathing visualization of market momentum. Here's what sets it apart: Exponential Gradient Technology This isn't just a simple fill between two lines. It's a professionally engineered gradient system with 26 precision layers using exponential density distribution. The result? An organic, cloud-like appearance where the center is dramatically darker (15% transparency - where crossovers and price action occur), while edges fade gracefully (75% transparency). Think of it as a visual "heat map" of trend strength. Dynamic Momentum Intelligence Most MA clouds only show structure (which MA is on top). This indicator shows momentum strength in real-time through four intelligent states: - 🟢 Bright Green = Explosive bullish momentum (both MAs rising strongly) - 🔵 Blue = Weakening bullish (structure intact, but momentum fading) - 🟠 Orange = Caution zone (bearish structure forming, weak momentum) - 🔴 Deep Red = Strong bearish momentum (both MAs falling) The cloud literally tells you when trends are accelerating or losing steam. Conditional Performance Architecture Every calculation is optimized for speed. Disable a feature? It stops calculating entirely—not just hidden, but not computed . The 26-layer gradient only renders when enabled. Toggle signals off? Those crossover checks don't run. This makes it one of the most efficient cloud indicators available, even with its advanced visual system. Zero Repaint Guarantee All signals and momentum states are based on confirmed bar data only . What you see in historical data is exactly what you would have seen trading live. No lookahead bias. No repainting tricks. No signals that "magically" appear perfect in hindsight. If a signal shows in history, it would have triggered in real-time at that exact moment. Educational by Design Every single input includes comprehensive tooltips with: - Clear explanations of what each parameter does - Practical examples of when to use different settings - Recommended configurations for scalping, day trading, and swing trading - Real-world trading impact ("This affects entry timing" vs "This is visual only") You're not just getting an indicator—you're learning how to use it effectively . ═══════════════════════════════════════════════ THE GRADIENT CLOUD - TECHNICAL DETAILS ═══════════════════════════════════════════════ Architecture: 26 precision layers for silk-smooth transitions Exponential density curve - layers packed tightly near center (where crossovers happen), spread wider at edges 75%-15% transparency range - center is highly opaque (15%), edges fade gracefully (75%) V-Gradient design - emphasizes the action zone between Fast and Medium MAs The Four Momentum States: 🟢 GREEN - Strong Bullish Fast MA above Medium MA Both MAs rising with momentum > 0.02% Action: Enter/hold LONG positions, strong uptrend confirmed 🔵 BLUE - Weak Bullish Fast MA above Medium MA Weak or flat momentum Action: Caution - bullish structure but losing strength, consider trailing stops 🟠 ORANGE - Weak Bearish Medium MA above Fast MA Weak or flat momentum Action: Warning - bearish structure developing, consider exits 🔴 RED - Strong Bearish Medium MA above Fast MA Both MAs falling with momentum < -0.02% Action: Enter/hold SHORT positions, strong downtrend confirmed Smooth Transitions: The momentum score is smoothed using an 8-bar EMA to eliminate noise and prevent whipsaws. You see the true trend , not every minor fluctuation. ═══════════════════════════════════════════════ FLEXIBLE MOVING AVERAGE SYSTEM ═══════════════════════════════════════════════ Three Customizable MAs: Fast MA (default: EMA 10) - Reacts quickly to price changes, defines short-term momentum Medium MA (default: EMA 20) - Balances responsiveness with stability, core trend reference Slow MA (default: SMA 200, optional) - Long-term trend filter, major support/resistance Six MA Types Available: EMA - Exponential; faster response, ideal for momentum and day trading SMA - Simple; smooth and stable, best for swing trading and trend following WMA - Weighted; middle ground between EMA and SMA VWMA - Volume-weighted; reflects market participation, useful for liquid markets RMA - Wilder's smoothing; used in RSI/ADX, excellent for trend filters HMA - Hull; extremely responsive with minimal lag, aggressive option Recommended Settings by Trading Style: Scalping (1m-5m): Fast: EMA(5-8) Medium: EMA(10-15) Slow: Not needed or EMA(50) Day Trading (5m-1h): Fast: EMA(10-12) Medium: EMA(20-21) Slow: SMA(200) for bias Swing Trading (4h-1D): Fast: EMA(10-20) Medium: EMA(34-50) Slow: SMA(200) Pro Tip: Start with Fast < Medium < Slow lengths. The gradient works best when there's clear separation between Fast and Medium MAs. ═══════════════════════════════════════════════ CROSSOVER SIGNALS - CLEAN & RELIABLE ═══════════════════════════════════════════════ Golden Cross ⬆ LONG Signal Fast MA crosses above Medium MA Classic bullish reversal or trend continuation signal Most reliable when accompanied by GREEN cloud (strong momentum) Death Cross ⬇ SHORT Signal Fast MA crosses below Medium MA Classic bearish reversal or trend continuation signal Most reliable when accompanied by RED cloud (strong momentum) Signal Intelligence: Anti-spam filter - Minimum 5 bars between signals prevents noise Clean labels - Placed precisely at crossover points Alert-ready - Built-in ALERTS for automated trading systems No repainting - Signals based on confirmed bars only Signal Quality Assessment: High-Quality Entry: Golden Cross + GREEN cloud + Price above both MAs = Strong bullish setup ✓ Low-Quality Entry (skip or wait): Golden Cross + ORANGE cloud + Choppy price action = Weak bullish setup, likely whipsaw ✗ ═══════════════════════════════════════════════ REAL-TIME INFO PANEL ═══════════════════════════════════════════════ An at-a-glance dashboard showing: Trend Strength Indicator: Visual display of current momentum state Color-coded header matching cloud color Instant recognition of market bias MA Distance Table: Shows percentage distance of price from each enabled MA: Green rows : Price ABOVE MA (bullish) Red rows : Price BELOW MA (bearish) Gray rows : Price AT MA (rare, decision point) Distance Interpretation: +2% to +5%: Healthy uptrend +5% to +10%: Getting extended, caution +10%+: Overextended, expect pullback -2% to -5%: Testing support -5% to -10%: Oversold zone -10%+: Deep correction or downtrend Customization: 4 corner positions 5 font sizes (Tiny to Huge) Toggle visibility on/off ═══════════════════════════════════════════════ HOW TO USE - PRACTICAL TRADING GUIDE ═══════════════════════════════════════════════ STRATEGY 1: Trend Following Identify trend : Wait for GREEN (bullish) or RED (bearish) cloud Enter on signal : Golden Cross in GREEN cloud = LONG, Death Cross in RED cloud = SHORT Hold position : While cloud maintains color Exit signals : • Cloud turns ORANGE/BLUE = momentum weakening, tighten stops • Opposite crossover = close position • Cloud turns opposite color = full reversal STRATEGY 2: Pullback Entries Confirm trend : GREEN cloud established (bullish bias) Wait for pullback : Price touches or crosses below Fast MA Enter when : Price rebounds back above Fast MA with cloud still GREEN Stop loss : Below Medium MA or recent swing low Target : Previous high or when cloud weakens STRATEGY 3: Momentum Confirmation Your setup triggers : (e.g., chart pattern, support/resistance) Check cloud color : • GREEN = proceed with LONG • RED = proceed with SHORT • BLUE/ORANGE = skip or reduce size Use gradient as confluence : Not as primary signal, but as momentum filter Risk Management Tips: Never enter against the cloud color (don't LONG in RED cloud) Reduce position size during BLUE/ORANGE (transition periods) Place stops beyond Medium MA for swing trades Use Slow MA (200) as final trend filter - don't SHORT above it in uptrends ═══════════════════════════════════════════════ PERFORMANCE & OPTIMIZATION ═══════════════════════════════════════════════ Tested On: Crypto: BTC, ETH, major altcoins Stocks: SPY, AAPL, TSLA, QQQ Forex: EUR/USD, GBP/USD, USD/JPY Indices: S&P 500, NASDAQ, DJI ═══════════════════════════════════════════════ TRANSPARENCY & RELIABILITY ═══════════════════════════════════════════════ Educational Focus: Detailed tooltips on every input Clear documentation of methodology Practical examples in descriptions Teaches you why , not just what Open Logic: Momentum calculation: (Fast slope + Medium slope) / 2 Smoothing: 8-bar EMA to reduce noise Thresholds: ±0.02% for strong momentum classification Everything is transparent and explainable ═══════════════════════════════════════════════ COMPLETE FEATURE LIST ═══════════════════════════════════════════════ Visual Components: 26-layer exponential gradient cloud 3 customizable moving average lines Golden Cross / Death Cross labels Real-time info panel with trend strength MA distance table Calculation Features: 6 MA types (EMA, SMA, WMA, VWMA, RMA, HMA) Momentum-based cloud coloring Smoothed trend strength scoring Conditional performance optimization Customization Options: All MA lengths adjustable All colors customizable (when gradient disabled) Panel position (4 corners) Font sizes (5 options) Toggle any feature on/off Signal Features: Anti-spam filter (configurable gap) Clean, non-overlapping labels Built-in alert conditions No repainting guarantee ═══════════════════════════════════════════════ IMPORTANT DISCLAIMERS ═══════════════════════════════════════════════ This indicator is for educational and informational purposes only Not financial advice - always do your own research Past performance does not guarantee future results Use proper risk management - never risk more than you can afford to lose Test on paper/demo accounts before using with real money Combine with other analysis methods - no single indicator is perfect Works best in trending markets; less effective in choppy/sideways conditions Signals may perform differently in different timeframes and market conditions The indicator uses historical data for MA calculations - allow sufficient lookback period ═══════════════════════════════════════════════ CREDITS & TECHNICAL INFO ═══════════════════════════════════════════════ Version: 2.0 Release: October 2025 Special Thanks: TradingView community for feedback and testing Pine Script documentation for technical reference ═══════════════════════════════════════════════ SUPPORT & UPDATES ═══════════════════════════════════════════════ Found a bug? Comment below with: Ticker symbol Timeframe Screenshot if possible Steps to reproduce Feature requests? I'm always looking to improve! Share your ideas in the comments. Questions? Check the tooltips first (hover over any input) - most answers are there. If still stuck, ask in comments. ═══════════════════════════════════════════════ Happy Trading! Remember: The best indicator is the one you understand and use consistently. Take time to learn how the cloud behaves in different market conditions. Practice on paper before going live. Trade smart, manage risk, and may the trends be with you! 🚀
Pine Script® 인디케이터
orenluxy의
2
PRO Scalper(EN) ## What it is **PRO Scalper** is an intraday price–action and liquidity map that helps you see where the market is likely to move **now**, not just where it has been. It combines five building blocks that professional scalpers often watch together: 1. **Session Volume-Weighted Average Price (VWAP)** — the intraday “fair value” anchor. 2. **Opening Range** — the first minutes of the session that set the day’s balance. 3. **Trend filter** — higher-timeframe bias using **Exponential Moving Averages (EMA)** and optional **Average Directional Index (ADX)** strength. 4. **Two independent Supply/Demand zone engines** — zones are drawn from confirmed swing pivots, with midlines and **touch counters**. 5. **Order-flow style visuals**: * **Delta bubbles** (green/red circles) show where buying or selling pressure was unusually strong, using a safe **delta proxy** (no external feeds). * **Liquidity densities** (subtle rectangular bands) highlight clusters of large activity that often act as magnets or barriers and disappear when “eaten” by strong moves. This mix gives you a **complete intraday picture**: the mean (VWAP), the day’s initial balance (Opening Range), the higher-timeframe push (trend filter), the nearby fuel or brakes (zones), and the live pressure points (bubbles and densities). --- ## Why these components * **VWAP** tracks where the bulk of traded value sits. Price tends to rotate around it or accelerate away from it — a perfect compass for scalps. * **Opening Range** frames the early auction. Many intraday breaks, fades and retests start at its boundaries. * **EMA bias + ADX strength** separates trending conditions from chop, so you can keep only the zones that agree with the bigger push. * **Pivot-based zones (two pairs at once)** are simple, objective and fast. Midlines help with confirmations; touch counters quantify how many times the zone was tested. * **Bubbles and densities** add the “effort” layer: where the push appeared and where liquidity is concentrated. You see **where** a move is likely to continue or fail. Together they reduce ambiguity: **context + level + effort** — all on one screen. --- ## How it works (plain language) * **VWAP** resets each day and is calculated as the cumulative sum of typical price multiplied by volume divided by total volume. * **Opening Range** is either automatic (a multiple of your chart timeframe) or a manual number of minutes. While it is forming, the highest high and lowest low are captured and plotted as the range. * **Trend filter** * **EMA Fast** and **EMA Slow** define directional bias. * **ADX (optional)** adds “trend strength”: only when the Average Directional Index is above the chosen threshold do we treat the move as strong. You can source this from a higher timeframe. * **Zones** * There are **two independent pairs** of pivots at the same time (for example 10-left 10-right and 5-left 5-right). * Each detected pivot creates a **Supply** (from a swing high) or **Demand** (from a swing low) box. Box depth = **zone depth × Average True Range** for adaptive sizing; the boxes **extend forward**. * Midline (optional dashed line inside the box) is the “balance” of the zone. * **“Only in trend”** mode can hide boxes that go against the higher-timeframe bias. * The **touch counter** increases when price revisits the box. Labels show the pair name and the number of touches. * **Bubbles** * A safe **delta proxy** measures bar pressure (for example, range-weighted close vs open). * A **quantile filter** shows only unusually large pressure: choose lookback and percentile, and the script draws a circle sized by intensity (green = bullish pressure, red = bearish). * **Densities** * The script marks heavy activity clusters as **subtle bands** around price (depth = fraction of Average True Range). * If price **breaks** a density with volume above its moving average, the band **disappears** (“eaten”), which often precedes continuation. --- ## How to use — practical playbooks > Recommended chart: crypto or index futures, one to five minutes. Use **one hour** or **fifteen minutes** for the higher-timeframe bias. ### 1) Trend pullback scalp (continuation) 1. Enable **Only in trend** zones. 2. In an uptrend: wait for a pullback into a **Demand** zone that overlaps with VWAP or sits just below the Opening Range midpoint. 3. Look for **green bubbles** near the zone’s bottom or a fresh **density** under price. 4. Enter on a candle closing **back above the zone midline**. 5. Stop-loss: below the bottom of the zone or a small multiple of Average True Range. 6. Targets: previous swing high, Opening Range high, fixed risk multiples, or VWAP. Mirror the logic for downtrends using Supply zones, red bubbles and densities above price. ### 2) Reversion with liquidity sweep (fade) 1. Bias neutral or countertrend allowed. 2. Price **wicks through** a zone boundary (or an Opening Range line) and **closes back inside** the zone. 3. The bubble color often flips (absorption). 4. Enter toward the **inside** of the zone; stop beyond the sweep wick; first target = zone midline, second = opposite side of the zone or VWAP. ### 3) Opening Range break and retest 1. Wait for the Opening Range to complete. 2. A break with a large bubble suggests intent. 3. Look for a **retest** into a nearby zone aligned with VWAP. 4. Trade continuation toward the next zone or the session extremes. ### 4) Density “eaten” continuation 1. When a density band **disappears** on high volume, it often means the resting liquidity was consumed. 2. Trade in the direction of the break, toward the nearest opposing zone. --- ## Settings — quick guide **Core** * *ATR Length* — used for zone and density depths. * *Show VWAP / Show Opening Range*. * *Opening Range*: Auto (multiple of timeframe minutes) or Manual minutes. **Trend Filter** * *Mode*: Off, EMA only, or EMA with ADX strength. * *Use higher timeframe* and its value. * *EMA Fast / EMA Slow*, *ADX Length*, *ADX threshold*. * *Plot EMA filter* to display the moving averages. **Zones (two pairs)** * *Pivot A Left / Right* and *Pivot B Left / Right*. * *Zone depth × ATR*, *Extend bars*. * *Show zone midline*, *Only in trend zones*. * Labels automatically show the touch counters. **Bubbles** * *Show Bubbles*. * *Quantile lookback* and *Quantile percent* (higher percent = stricter filter, fewer bubbles). **Densities** * *Metric*: absolute delta proxy or raw volume. * *Quantile lookback / percent*. * *Depth × ATR*, *Extend bars*, *Merge distance* (in ATR), * *Break condition*: volume moving average length and multiplier, * *Midline for densities* (optional dashed line). --- ## Tips and risk management * This script **does not use external order-flow feeds**. Delta is a **proxy** suitable for TradingView; tune quantiles per symbol and timeframe. * Do not trade every bubble. Combine **context (trend + VWAP + Opening Range)** with **level (zone)** and **effort (bubble/density)**. * Set stop-losses beyond the zone or at a fraction of Average True Range. Predefine risk per trade. * Backtest your rules with a strategy script before using real funds. * Markets differ. Parameters that work on Bitcoin may not transfer to low-liquidity altcoins or stocks. * Nothing here is financial advice. Scalping is high-risk; slippage and over-trading can quickly damage your account. --- ## What makes PRO Scalper unique * Two **independent** zone engines run in parallel, so you can see both **larger structure** and **fine intraday levels** at the same time. * Clean **“only in trend” rendering** — zones and midlines against the bias can be hidden, reducing clutter and hesitation. * **Touch counters** convert “feel” into numbers. * **Self-contained order-flow visuals** (bubbles and densities) that require no extra data sources. * Careful defaults: subtle colors for densities, clearer zones, and responsive auto Opening Range. --- (RU) ## Что это такое **PRO Scalper** — это индикатор для внутридневной торговли, который показывает **контекст и ликвидность прямо сейчас**. Он объединяет пять модулей, которыми профессиональные скальперы пользуются вместе: 1. **VWAP** — средневзвешенная по объему цена за сессию, «справедливая стоимость» дня. 2. **Opening Range** — первая часть сессии, задающая баланс дня. 3. **Фильтр тренда** — направление старшего таймфрейма по **экспоненциальным средним** и при желании по силе тренда **Average Directional Index**. 4. **Две независимые системы зон спроса/предложения** — зоны строятся от подтвержденных экстремумов (пивотов), имеют **среднюю линию** и **счетчик касаний**. 5. **Визуализация «ордер-флоу»**: * **Пузыри дельты** (зеленые/красные круги) — места повышенного покупательного/продажного давления, рассчитанные через безопасный **прокси-дельты**. * **Плотности ликвидности** (ненавязчивые прямоугольные ленты) — скопления объема, которые нередко притягивают цену или удерживают ее и исчезают, когда «разъедаются» сильным движением. Итог — **полная картинка момента**: среднее (VWAP), баланс дня (Opening Range), старшая сила (фильтр тренда), ближайшие уровни топлива/тормозов (зоны), текущие точки усилия (пузыри и плотности). --- ## Почему именно эти элементы * **VWAP** показывает, где сосредоточена стоимость; цена либо вращается вокруг него, либо быстро уходит — идеальный ориентир скальпера. * **Opening Range** фиксирует ранний аукцион — от его границ часто начинаются пробои, возвраты и ретесты. * **EMA + ADX** отделяют тренд от «пилы», позволяя оставлять на графике только зоны по направлению старшего таймфрейма. * **Зоны от пивотов** просты, объективны и быстры; средняя линия помогает подтверждать разворот, счетчик касаний переводит субъективность в цифры. * **Пузыри и плотности** добавляют слой «усилия»: где именно возник толчок и где сконцентрирована ликвидность. Комбинация **контекста + уровня + усилия** уменьшает двусмысленность и ускоряет принятие решения. --- ## Как это работает (простыми словами) * **VWAP** каждый день стартует заново: сумма «типичной цены × объем» делится на суммарный объем. * **Opening Range** — автоматический (кратный минутам вашего таймфрейма) или вручную заданный период; пока он формируется, фиксируются максимум и минимум. * **Фильтр тренда** * Две экспоненциальные средние задают направление. * **ADX** (по желанию) добавляет «силу». Источник можно взять со старшего таймфрейма. * **Зоны** * Одновременно работает **две пары** пивотов (например 10-лево 10-право и 5-лево 5-право). * От пивота строится зона **предложения** (от максимума) или **спроса** (от минимума). Глубина зоны = **коэффициент × Average True Range**; зона тянется вперед. * Внутри рисуется **средняя линия** (по желанию). * Режим **«только по тренду»** скрывает зоны против старшего направления. * **Счетчик касаний** увеличивается, когда цена снова входит в зону; подпись показывает пару и количество касаний. * **Пузыри** * Используется безопасный **прокси-дельты** — измерение «напряжения» внутри свечи. * Через **квантильный фильтр** выводятся только необычно сильные места: настраиваются окно и процент квантиля; размер кружка — сила, цвет: зеленый покупатели, красный продавцы. * **Плотности** * Крупные активности отмечаются **ненавязчивыми прямоугольниками** (глубина — доля Average True Range). * Если плотность **пробивается** объемом выше среднего, она **исчезает** — часто это предвещает продолжение. --- ## Как пользоваться — практические схемы > Рекомендация: крипто или фьючерсы, таймфрейм 1–5 минут. Для старшего фильтра удобно взять **1 час** или **15 минут**. ### 1) Скальп на откат по тренду 1. Включите **«только по тренду»**. 2. В восходящем тренде дождитесь отката в **зону спроса**, желательно рядом с **VWAP** или серединой **Opening Range**. 3. Подтверждение — **зеленые пузыри** у нижней границы зоны или свежая **плотность** под ценой. 4. Вход после закрытия свечи **выше средней линии** зоны. 5. Стоп-лосс: за нижнюю границу зоны или небольшой множитель Average True Range. 6. Цели: предыдущий максимум, верх Opening Range, фиксированные R-множители, либо VWAP. Для нисходящего тренда зеркально: зоны предложения, красные пузыри и плотности над ценой. ### 2) Контрдвижение с «выбиванием ликвидности» 1. Нейтральный или контртрендовый режим. 2. Цена **выносит хвостом** границу зоны (или линию Opening Range) и **закрывается обратно внутри**. 3. Цвет пузыря часто меняется (поглощение). 4. Вход внутрь зоны; стоп — за хвост выбивания; цели: средняя линия, противоположная граница зоны или VWAP. ### 3) Пробой Opening Range + ретест 1. Дождитесь завершения диапазона. 2. Сильный пробой с крупным пузырем — признак намерения. 3. Ищите **ретест** в зоне по тренду рядом с линией диапазона и VWAP. 4. Торгуйте продолжение к следующей зоне. ### 4) Продолжение после «съеденной» плотности 1. Когда прямоугольник плотности **исчезает** на повышенном объеме, это значит, что ликвидность поглощена. 2. Торгуйте в сторону пробоя к ближайшей противоположной зоне. --- ## Настройки — краткая шпаргалка **Core** — Длина Average True Range (для размеров зон и плотностей). — Включение VWAP и Opening Range. — Длина Opening Range: автоматическая (кратная минутам ТФ) или ручная. **Trend Filter** — Режим: выкл., только средние, либо средние + ADX. — Источник со старшего таймфрейма и его значение. — Длины средних, длина ADX и порог силы. — Показать/скрыть линий средних. **Zones (две пары одновременно)** — Пара A: лев/прав; Пара B: лев/прав. — Глубина зоны × Average True Range, продление по барам. — Средняя линия, режим **«только по тренду»**. — Подписи со счетчиком касаний. **Bubbles** — Вкл./выкл., окно поиска и процент квантиля (чем выше процент — тем реже пузыри). **Densities** — Метрика: абсолютная прокси-дельты или чистый объем. — Окно/квантиль, глубина × Average True Range, продление, — Порог объединения (в Average True Range), — Условие «разъедания» по объему, — Средняя линия плотности (по желанию). --- ## Советы и риски * Индикатор **не использует внешние потоки ордер-флоу**. Дельта — **прокси**, подходящая для TradingView; подбирайте квантили под инструмент и таймфрейм. * Не торгуйте каждый пузырь. Склейте **контекст (тренд + VWAP + Opening Range)** с **уровнем (зона)** и **усилием (пузырь/плотность)**. * Стоп-лосс — за границей зоны или по Average True Range. Риск на сделку задавайте заранее. * Перед реальными деньгами протестируйте правила в стратегии. * Разные рынки ведут себя по-разному; настройки из Биткоина могут не подойти малоликвидным альткоинам или акциям. * Это не инвестиционная рекомендация. Скальпинг — высокий риск; проскальзывание и переизбыток сделок быстро наносят ущерб капиталу. --- ## Чем уникален PRO Scalper * Две **одновременные** системы зон показывают и **крупную структуру**, и **точные локальные уровни**. * Режим **«только по тренду»** чистит экран от лишних уровней и ускоряет решение. * **Счетчики касаний** дают количественную опору. * **Самодостаточные визуализации усилия** (пузыри и плотности) — без сторонних источников данных. * Аккуратная цветовая схема: плотности — мягко, зоны — ясно; Opening Range — адаптивный. Пусть он станет вашей «картой местности» для быстрых и дисциплинированных решений внутри дня.
Pine Script® 인디케이터
BadRockCapital의
OfficalQLBacktestingMetricsLibrary "OfficalQLBacktestingMetrics" TODO: credits to elicobra and bikelife76 curve(disp_ind)   Call function to get a certain curve of your strategy.   Parameters:      disp_ind (string)   Returns: Returns type of curve plot. quantlapseTable(option, position)   Assign this function to a random variable to get the "Performance Table"   Parameters:      option (simple string)      position (simple string) OfficialQLBacktestingMetrics is a comprehensive backtesting metrics and visualization library for Pine Script v6. It provides an advanced set of quantitative performance tools to evaluate and visualize the robustness of any TradingView strategy. Designed for precision and clarity, this library calculates key trading metrics, generates visual performance tables, and applies dynamic color grading to highlight strengths and weaknesses across critical performance dimensions. 🔍 Key Features Comprehensive Statistical Engine: Calculates advanced metrics including Sharpe Ratio, Sortino Ratio, Omega Ratio, Profit Factor, Max Equity Drawdown, Intra-Trade Drawdown, Win/Loss consistency, Long/Short profit ratios, and more. Visual Performance Table: The quantlapseTable() function creates a fully customizable performance dashboard directly on your chart. Choose between: Full — displays all available statistics. Simple — compact view of key performance metrics. None — hides the table when not needed. Dynamic Color Grading: Metrics are visually ranked through gradient color logic to help quickly identify strong vs weak areas in strategy performance. Curve and Filtering Utilities: Use curve() and cleaner() to easily access and manage equity curves, profit data, and strategy-specific plots for further analysis or visualization. Smart Statistical Adjustments: The library automatically scales statistical measures such as Sharpe and Sortino ratios according to the chart’s timeframe, ensuring accurate normalization across daily, weekly, or intraday data. Robustness Scoring System (“Slap Score”): A built-in performance quality evaluator that scores a strategy’s overall robustness based on multiple key performance thresholds. 🧩 Main Functions Function Description curve(disp_ind) Returns selected equity or profit curve. cleaner(disp_ind, plot) Filters plots to show only selected display types. stat_calc() Core metric computation engine. Returns all major backtesting stats. quantlapseTable(option, position) Generates performance table (Full, Simple, or None). f_colors(metric, value) Assigns gradient colors to metrics for visual evaluation. maxEquityDrawDown() / maxTradeDrawDown() Calculates drawdowns at equity and trade levels. consecutive_wins() / consecutive_losses() Measures streaks of profitable/unprofitable trades. long_profit() / short_profit() Evaluates long/short side profitability ratios. ⚙️ Usage Example //version=6 import QuantLapse/OfficalQLBacktestingMetrics/1 as ql disp_ind = input.string ("Equity" , title = "Display Curve" , tooltip = "Choose which data you would like to display", options= , group = "🌌𝙌𝙪𝙖𝙣𝙩𝙇𝙖𝙥𝙨𝙚 𝘽𝙖𝙘𝙠𝙩𝙚𝙨𝙩𝙞𝙣𝙜🚀") pos_table = input.string("Middle Right", "Table Position", options = , group = "🌌𝙌𝙪𝙖𝙣𝙩𝙇𝙖𝙥𝙨𝙚 𝘽𝙖𝙘𝙠𝙩𝙚𝙨𝙩𝙞𝙣𝙜🚀") type_table = input.string("Full", "Table Type", options = , group = "🌌𝙌𝙪𝙖𝙣𝙩𝙇𝙖𝙥𝙨𝙚 𝘽𝙖𝙘𝙠𝙩𝙚𝙨𝙩𝙞𝙣𝙜🚀") ql.quantlapseTable("Full", "Top Right") plot(ql.curve(disp_ind), color = color.teal, linewidth = 2) ql.quantlapseTable(type_table, pos_table) 🧠 Credits Created by elicobra and bikelife76 tweaked my QuantLapse
Pine Script® 라이브러리
QuantLapse의
Scalper Pro Pattern Recognition & Price ActionOVERVIEW Scalper Pro is a comprehensive multi-timeframe trading indicator that combines Smart Money Concepts (SMC) with traditional technical analysis to provide scalpers and day traders with high-probability entry and exit signals. This indicator integrates multiple analytical frameworks into a unified visual system designed specifically for short-term trading strategies. ORIGINALITY & PURPOSE What Makes This Script Original This script is not a simple mashup of existing indicators. Instead, it represents a carefully orchestrated integration of complementary analytical methods that work together to solve a specific problem: identifying high-probability scalping opportunities in volatile markets. The unique value proposition: Adaptive Trend Filtering System - Combines a customized SuperTrend algorithm with dual-period range filters (Cirrus Cloud) and Hull Moving Average trend cloud to create a three-layer trend confirmation system Smart Money Concepts Integration - Incorporates institutional trading concepts (Order Blocks, Fair Value Gaps, Break of Structure) with retail technical indicators for a complete market structure view Dynamic Risk Management - Automatically calculates stop-loss and take-profit levels based on ATR volatility, providing objective position sizing ADX-Based Market Regime Detection - Identifies ranging vs. trending markets through ADX analysis with visual bar coloring to prevent whipsaws during consolidation Why Combine These Specific Components Each component addresses a specific weakness in scalping: SuperTrend provides the primary directional bias but can generate false signals in ranging markets Range Filters smooth out noise and confirm trend direction, reducing SuperTrend false positives ADX Analysis prevents trading during low-volatility consolidation when most indicators fail SMC Elements identify institutional activity zones where price is likely to react strongly ATR-Based Risk Management adapts position sizing to current volatility conditions The synergy creates a system where signals are only generated when multiple confirmation layers align, significantly reducing false signals common in single-indicator approaches. HOW IT WORKS Core Calculation Methodology 1. SuperTrend Signal Generation The script uses a modified SuperTrend algorithm with the following calculation: ATR = Average True Range (default: 10 periods) Factor = 7 (default sensitivity multiplier) Upper Band = Source + (Factor × ATR) Lower Band = Source - (Factor × ATR) Directional Logic: When price crosses above SuperTrend → Bullish signal When price crosses below SuperTrend → Bearish signal SuperTrend value is plotted as dynamic support/resistance Key Modification: The sensitivity parameter (nsensitivity * 7) allows users to adjust the aggressiveness of trend detection without changing the core ATR calculation. 2. Range Filter System (Cirrus Cloud) The Range Filter uses a smoothed range calculation to filter out market noise: Smooth Range Calculation: WPER = (Period × 2) - 1 AVRNG = EMA(|Price - Price |, Period) Smooth Range = EMA(AVRNG, WPER) × Multiplier Two-Layer System: Layer 1: 22-period with 6x multiplier (broader trend) Layer 2: 15-period with 5x multiplier (tighter price action) Visual Output: The space between these two filters is colored: Green fill = Bullish trend (Layer 1 > Layer 2) Red fill = Bearish trend (Layer 1 < Layer 2) This creates a "cloud" that expands during strong trends and contracts during consolidation. 3. ADX Market Regime Detection Calculation: +DM = Positive Directional Movement -DM = Negative Directional Movement True Range = RMA of True Range (15 periods) +DI = 100 × RMA(+DM, 15) / True Range -DI = 100 × RMA(-DM, 15) / True Range ADX = 100 × RMA(|+DI - -DI| / (+DI + -DI), 15) Threshold System: ADX < Threshold (default 15) = Ranging market → Bar color changes to purple ADX > Threshold = Trending market → Normal bar coloring applies Purpose: This prevents taking trend-following signals during sideways markets where most indicators produce whipsaws. 4. Smart Money Concepts (SMC) Integration Order Blocks (OB): Identified using swing high/low detection with customizable pivot length Bullish OB: Last down-close candle before bullish Break of Structure (BOS) Bearish OB: Last up-close candle before bearish BOS Extended forward until price breaks through them Fair Value Gaps (FVG): Detected when a three-candle gap exists: Bullish FVG: Low > High Bearish FVG: High < Low Filtered by price delta percentage to ensure significant gaps Displayed as boxes that delete when price fills the gap Break of Structure (BOS) vs. Change of Character (CHoCH): BOS = Price breaks the previous structural high/low in the current trend direction CHoCH = Price breaks structure in the opposite direction (potential trend reversal) Both internal (minor) and swing (major) structures are tracked Equal Highs/Lows (EQH/EQL): Detected when consecutive swing highs/lows are within ATR threshold Often indicates liquidity pools that price may sweep before reversing 5. ATR-Based Risk Management Calculation: ATR Band = ATR(14) × Risk Multiplier (default 3%) Stop Loss = Entry - ATR Band (for longs) or Entry + ATR Band (for shorts) Take Profit Levels: TP1 = Entry + (Entry - Stop Loss) × 1 TP2 = Entry + (Entry - Stop Loss) × 2 TP3 = Entry + (Entry - Stop Loss) × 3 Dynamic Labels: Stop loss and take profit levels are automatically calculated and displayed as labels on the chart when new signals trigger. 6. Hull Moving Average Trend Cloud HMA = WMA(2 × WMA(Close, Period/2) - WMA(Close, Period), sqrt(Period)) Period = 600 bars (long-term trend) The HMA provides a smoothed long-term trend reference that's more responsive than traditional moving averages while filtering out short-term noise. HOW TO USE THE INDICATOR Entry Signals Primary Buy Signal: SuperTrend changes to green (price crosses above) ADX shows market is NOT ranging (bars are NOT purple) Price is within or near a bullish Order Block OR bullish FVG Cirrus Cloud shows green fill (Layer 1 > Layer 2) Primary Sell Signal: SuperTrend changes to red (price crosses below) ADX shows market is NOT ranging Price is within or near a bearish Order Block OR bearish FVG Cirrus Cloud shows red fill (Layer 1 < Layer 2) Confirmation Layers Higher Probability Trades Include: Bullish/Bearish BOS in the same direction as signal Equal highs/lows being swept before entry Price respecting premium/discount zones (above/below equilibrium) Multiple timeframe alignment (use MTF settings) Exit Strategy The indicator provides three take-profit levels: TP1: Conservative target (1:1 risk-reward) TP2: Moderate target (2:1 risk-reward) TP3: Aggressive target (3:1 risk-reward) Suggested Exit Approach: Close 1/3 position at TP1 Move stop to breakeven Close 1/3 position at TP2 Trail remaining position or exit at TP3 Risk Management Stop Loss: Use the ATR-based stop loss level displayed on chart Alternatively, use percentage-based stop (adjustable in settings) Never risk more than 1-2% of account per trade Position Sizing: Position Size = (Account Risk $) / (Entry Price - Stop Loss Price) CUSTOMIZABLE SETTINGS Core Parameters Buy/Sell Signals: Toggle signals on/off Adjust SuperTrend sensitivity (0.5 - 2.0) Risk Management: Show/hide TP/SL levels ATR period (default: 14) Risk percentage (default: 3%) Number of decimal places for price labels Trend Features: Cirrus Cloud display toggle Range filter periods (x1, x2, x3, x4) Hull MA length for trend cloud Smart Money Concepts: Order Block settings (swing length, display count) Fair Value Gap parameters (auto-threshold, extend length) Structure detection (internal vs swing) EQH/EQL threshold ADX Settings: ADX length (default: 15) Sideways threshold (10-30, default: 15) Bar color toggle Display Options: Previous day/week/month high/low levels Premium/Discount/Equilibrium zones Trend candle coloring (colored or monochrome) BEST PRACTICES & TRADING TIPS Optimal Use Cases Scalping on lower timeframes (1m, 5m, 15m) Rapid entry/exit with clear TP levels ADX filter prevents choppy market entries Day trading on medium timeframes (30m, 1H) Stronger trend confirmation Better risk-reward ratios Swing trading entries on higher timeframes (4H, Daily) Higher-probability structural setups Larger ATR-based stops accommodate volatility Market Conditions Best Performance: Trending markets with clear directional bias Post-news volatility with defined structure Markets respecting support/resistance levels Avoid Trading When: ADX indicator shows purple bars (ranging market) Multiple conflicting signals across timeframes Major news events without clear price structure Low volume periods (market open/close) Common Mistakes to Avoid Ignoring the ADX filter - Taking signals during ranging markets leads to whipsaws Not waiting for confirmation - Enter only when multiple layers align Overtrading - Fewer high-quality setups outperform many mediocre ones Ignoring risk management - Always use the calculated stop losses Fighting the trend - Trade WITH the SuperTrend and Cirrus Cloud direction TECHNICAL SPECIFICATIONS Indicator Type: Overlay (plots on price chart) Calculation Resources: Max labels: 500 Max lines: 500 Max boxes: 500 Max bars back: 500 Pine Script Version: 5 Compatible Timeframes: All timeframes (optimized for 1m to 1D) Compatible Instruments: Forex pairs Crypto assets Stock indices Individual stocks Commodities THEORETICAL FOUNDATION Trend-Following Concepts This indicator is based on the principle that markets trend more often than they range, and that trends tend to persist. The SuperTrend component captures this momentum while the range filters prevent premature entries during pullbacks. Smart Money Theory The SMC elements are based on the concept that institutional traders (banks, hedge funds) leave footprints in the form of: Order Blocks: Areas where large orders were placed Fair Value Gaps: Inefficient price movements that may be revisited Liquidity Sweeps: Stop hunts before continuation (EQH/EQL) Volatility-Based Position Sizing Using ATR for stop-loss placement ensures that stop distances adapt to current market conditions: Tight stops in low volatility (avoids excessive risk) Wider stops in high volatility (avoids premature stop-outs) PERFORMANCE EXPECTATIONS Realistic Expectations Win Rate: Expected: 45-55% (trend-following systems rarely exceed 60%) Higher win rates on trending days Lower win rates during consolidation (even with ADX filter) Risk-Reward Ratio: Target: 1.5:1 minimum (TP2) Achievable: 2:1 to 3:1 on strong trends Drawdowns: Normal: 10-15% of account during choppy periods Maximum: Should not exceed 20% with proper risk management Optimization Tips Backtesting Recommendations: Test on at least 1 year of historical data Include different market conditions (trending, ranging, volatile) Adjust SuperTrend sensitivity per instrument Optimize ADX threshold for your specific market Record trades to identify personal execution errors FREQUENTLY ASKED QUESTIONS Q: Can I use this for automated trading? A: The indicator provides signals, but you'll need to code a strategy script separately for automation. The signals can trigger alerts that connect to trading bots. Q: Why do I see conflicting signals? A: This is normal during transition periods. Wait for all confirmation layers to align before entering. Q: How often should I expect signals? A: Depends on timeframe and market conditions. On 5m charts during trending markets: 3-7 quality setups per session. Q: Can I use only some features? A: Yes, all components can be toggled on/off. However, the system works best with all confirmations active. Q: What's the difference between internal and swing structures? A: Internal = minor price structures (smaller pivots). Swing = major price structures (larger pivots). Both provide different levels of confirmation. DISCLAIMER This indicator is a tool for technical analysis and should not be the sole basis for trading decisions. Past performance does not guarantee future results. Always: Use proper risk management Test on demo accounts first Never risk more than you can afford to lose Combine with fundamental analysis when applicable Understand that no indicator is 100% accurate License: Mozilla Public License 2.0 Author: DrFXGOD VERSION HISTORY & UPDATES Initial Release - Version 1.0 Integrated SuperTrend, Range Filters, ADX, SMC concepts ATR-based risk management Multi-timeframe support Customizable visual elements SUPPORT & DOCUMENTATION For questions, suggestions, or bug reports, please comment on the script page or contact the author through TradingView. Additional Resources: Smart Money Concepts: Research ICT (Inner Circle Trader) materials ATR and Volatility: Refer to Wilder's original ATR documentation SuperTrend Indicator: Study original SuperTrend strategy papers
Pine Script® 인디케이터
Heuchache의
4
Dammu AI PROType & Purpose Multi-functional trend, swing, and smart money concept indicator. Combines SuperTrend, SMA, ATR-based risk management, swing structures, order blocks, EQH/EQL, and Fair Value Gaps (FVG). Designed for identifying trends, entries/exits, and support/resistance zones. 2. Trend Detection SuperTrend with ATR smoothing (nsensitivity*7 factor) for buy/sell signals. SMA filter (8 & 9 periods) confirms trend strength. Bar color changes: Green if close > supertrend. Red if close < supertrend. Cirrus Cloud highlights trend zones with semi-transparent colors. 3. Swing & Structure Detects pivot highs/lows and labels them as HH/LH (Highs), HL/LL (Lows). Generates BOS (Break of Structure) and CHoCH (Change of Character) signals. Internal swing structures and order blocks for short-term intraday moves. 4. Order Blocks Internal Order Blocks (iOBs) and Swing Order Blocks (OBs). Boxes drawn for bullish/bearish zones. Auto-delete when broken. Option to filter blocks by ATR or Cumulative Mean Range. 5. Risk Management TP/SL levels based on ATR and user-defined % risk. Shows lines and labels for: Entry Stop Loss TP1, TP2, TP3 Adjustable line style (solid/dashed/dotted). 6. Fair Value Gaps (FVG) Highlights bullish and bearish gaps. Option for auto-threshold filtering. Extendable FVG boxes. 7. EQH/EQL Detects Equal Highs (EQH) and Equal Lows (EQL) for potential reversals. Dotted lines with labels. 8. Smart Money Concepts (SMC) Features Shows: Swings (internal & swing structure) Internal order blocks Premium/Discount zones Fair Value Gaps Highs/Lows from previous day/week/month Configurable for historical vs present display. 9. Alerts Buy/Sell triggers: bull = crossover of close above SuperTrend. bear = crossunder of close below SuperTrend. Alerts for BOS/CHoCH, EQH/EQL, and OB breaks. 10. Visualization Trend clouds, colored bars, SMA markers, SuperTrend labels. Multi-layered info displayed without cluttering the chart. Customizable colors, line styles, and transparency. ✅ Summary: This indicator is a comprehensive trading tool for trend detection, swing structure, order block analysis, and risk management. It’s built for smart money and SMC-based trading, offering visual cues and alerts for key trading decisions.
Pine Script® 인디케이터
dammucool의
Scalper Pro Pattern Recognition & Price ActionOVERVIEW Scalper Pro is a comprehensive multi-timeframe trading indicator that combines Smart Money Concepts (SMC) with traditional technical analysis to provide scalpers and day traders with high-probability entry and exit signals. This indicator integrates multiple analytical frameworks into a unified visual system designed specifically for short-term trading strategies. ORIGINALITY & PURPOSE What Makes This Script Original This script is not a simple mashup of existing indicators. Instead, it represents a carefully orchestrated integration of complementary analytical methods that work together to solve a specific problem: identifying high-probability scalping opportunities in volatile markets. The unique value proposition: Adaptive Trend Filtering System - Combines a customized SuperTrend algorithm with dual-period range filters (Cirrus Cloud) and Hull Moving Average trend cloud to create a three-layer trend confirmation system Smart Money Concepts Integration - Incorporates institutional trading concepts (Order Blocks, Fair Value Gaps, Break of Structure) with retail technical indicators for a complete market structure view Dynamic Risk Management - Automatically calculates stop-loss and take-profit levels based on ATR volatility, providing objective position sizing ADX-Based Market Regime Detection - Identifies ranging vs. trending markets through ADX analysis with visual bar coloring to prevent whipsaws during consolidation Why Combine These Specific Components Each component addresses a specific weakness in scalping: SuperTrend provides the primary directional bias but can generate false signals in ranging markets Range Filters smooth out noise and confirm trend direction, reducing SuperTrend false positives ADX Analysis prevents trading during low-volatility consolidation when most indicators fail SMC Elements identify institutional activity zones where price is likely to react strongly ATR-Based Risk Management adapts position sizing to current volatility conditions The synergy creates a system where signals are only generated when multiple confirmation layers align, significantly reducing false signals common in single-indicator approaches. HOW IT WORKS Core Calculation Methodology 1. SuperTrend Signal Generation The script uses a modified SuperTrend algorithm with the following calculation: ATR = Average True Range (default: 10 periods) Factor = 7 (default sensitivity multiplier) Upper Band = Source + (Factor × ATR) Lower Band = Source - (Factor × ATR) Directional Logic: When price crosses above SuperTrend → Bullish signal When price crosses below SuperTrend → Bearish signal SuperTrend value is plotted as dynamic support/resistance Key Modification: The sensitivity parameter (nsensitivity * 7) allows users to adjust the aggressiveness of trend detection without changing the core ATR calculation. 2. Range Filter System (Cirrus Cloud) The Range Filter uses a smoothed range calculation to filter out market noise: Smooth Range Calculation: WPER = (Period × 2) - 1 AVRNG = EMA(|Price - Price |, Period) Smooth Range = EMA(AVRNG, WPER) × Multiplier Two-Layer System: Layer 1: 22-period with 6x multiplier (broader trend) Layer 2: 15-period with 5x multiplier (tighter price action) Visual Output: The space between these two filters is colored: Green fill = Bullish trend (Layer 1 > Layer 2) Red fill = Bearish trend (Layer 1 < Layer 2) This creates a "cloud" that expands during strong trends and contracts during consolidation. 3. ADX Market Regime Detection Calculation: +DM = Positive Directional Movement -DM = Negative Directional Movement True Range = RMA of True Range (15 periods) +DI = 100 × RMA(+DM, 15) / True Range -DI = 100 × RMA(-DM, 15) / True Range ADX = 100 × RMA(|+DI - -DI| / (+DI + -DI), 15) Threshold System: ADX < Threshold (default 15) = Ranging market → Bar color changes to purple ADX > Threshold = Trending market → Normal bar coloring applies Purpose: This prevents taking trend-following signals during sideways markets where most indicators produce whipsaws. 4. Smart Money Concepts (SMC) Integration Order Blocks (OB): Identified using swing high/low detection with customizable pivot length Bullish OB: Last down-close candle before bullish Break of Structure (BOS) Bearish OB: Last up-close candle before bearish BOS Extended forward until price breaks through them Fair Value Gaps (FVG): Detected when a three-candle gap exists: Bullish FVG: Low > High Bearish FVG: High < Low Filtered by price delta percentage to ensure significant gaps Displayed as boxes that delete when price fills the gap Break of Structure (BOS) vs. Change of Character (CHoCH): BOS = Price breaks the previous structural high/low in the current trend direction CHoCH = Price breaks structure in the opposite direction (potential trend reversal) Both internal (minor) and swing (major) structures are tracked Equal Highs/Lows (EQH/EQL): Detected when consecutive swing highs/lows are within ATR threshold Often indicates liquidity pools that price may sweep before reversing 5. ATR-Based Risk Management Calculation: ATR Band = ATR(14) × Risk Multiplier (default 3%) Stop Loss = Entry - ATR Band (for longs) or Entry + ATR Band (for shorts) Take Profit Levels: TP1 = Entry + (Entry - Stop Loss) × 1 TP2 = Entry + (Entry - Stop Loss) × 2 TP3 = Entry + (Entry - Stop Loss) × 3 Dynamic Labels: Stop loss and take profit levels are automatically calculated and displayed as labels on the chart when new signals trigger. 6. Hull Moving Average Trend Cloud HMA = WMA(2 × WMA(Close, Period/2) - WMA(Close, Period), sqrt(Period)) Period = 600 bars (long-term trend) The HMA provides a smoothed long-term trend reference that's more responsive than traditional moving averages while filtering out short-term noise. HOW TO USE THE INDICATOR Entry Signals Primary Buy Signal: SuperTrend changes to green (price crosses above) ADX shows market is NOT ranging (bars are NOT purple) Price is within or near a bullish Order Block OR bullish FVG Cirrus Cloud shows green fill (Layer 1 > Layer 2) Primary Sell Signal: SuperTrend changes to red (price crosses below) ADX shows market is NOT ranging Price is within or near a bearish Order Block OR bearish FVG Cirrus Cloud shows red fill (Layer 1 < Layer 2) Confirmation Layers Higher Probability Trades Include: Bullish/Bearish BOS in the same direction as signal Equal highs/lows being swept before entry Price respecting premium/discount zones (above/below equilibrium) Multiple timeframe alignment (use MTF settings) Exit Strategy The indicator provides three take-profit levels: TP1: Conservative target (1:1 risk-reward) TP2: Moderate target (2:1 risk-reward) TP3: Aggressive target (3:1 risk-reward) Suggested Exit Approach: Close 1/3 position at TP1 Move stop to breakeven Close 1/3 position at TP2 Trail remaining position or exit at TP3 Risk Management Stop Loss: Use the ATR-based stop loss level displayed on chart Alternatively, use percentage-based stop (adjustable in settings) Never risk more than 1-2% of account per trade Position Sizing: Position Size = (Account Risk $) / (Entry Price - Stop Loss Price) CUSTOMIZABLE SETTINGS Core Parameters Buy/Sell Signals: Toggle signals on/off Adjust SuperTrend sensitivity (0.5 - 2.0) Risk Management: Show/hide TP/SL levels ATR period (default: 14) Risk percentage (default: 3%) Number of decimal places for price labels Trend Features: Cirrus Cloud display toggle Range filter periods (x1, x2, x3, x4) Hull MA length for trend cloud Smart Money Concepts: Order Block settings (swing length, display count) Fair Value Gap parameters (auto-threshold, extend length) Structure detection (internal vs swing) EQH/EQL threshold ADX Settings: ADX length (default: 15) Sideways threshold (10-30, default: 15) Bar color toggle Display Options: Previous day/week/month high/low levels Premium/Discount/Equilibrium zones Trend candle coloring (colored or monochrome) BEST PRACTICES & TRADING TIPS Optimal Use Cases Scalping on lower timeframes (1m, 5m, 15m) Rapid entry/exit with clear TP levels ADX filter prevents choppy market entries Day trading on medium timeframes (30m, 1H) Stronger trend confirmation Better risk-reward ratios Swing trading entries on higher timeframes (4H, Daily) Higher-probability structural setups Larger ATR-based stops accommodate volatility Market Conditions Best Performance: Trending markets with clear directional bias Post-news volatility with defined structure Markets respecting support/resistance levels Avoid Trading When: ADX indicator shows purple bars (ranging market) Multiple conflicting signals across timeframes Major news events without clear price structure Low volume periods (market open/close) Common Mistakes to Avoid Ignoring the ADX filter - Taking signals during ranging markets leads to whipsaws Not waiting for confirmation - Enter only when multiple layers align Overtrading - Fewer high-quality setups outperform many mediocre ones Ignoring risk management - Always use the calculated stop losses Fighting the trend - Trade WITH the SuperTrend and Cirrus Cloud direction TECHNICAL SPECIFICATIONS Indicator Type: Overlay (plots on price chart) Calculation Resources: Max labels: 500 Max lines: 500 Max boxes: 500 Max bars back: 500 Pine Script Version: 5 Compatible Timeframes: All timeframes (optimized for 1m to 1D) Compatible Instruments: Forex pairs Crypto assets Stock indices Individual stocks Commodities THEORETICAL FOUNDATION Trend-Following Concepts This indicator is based on the principle that markets trend more often than they range, and that trends tend to persist. The SuperTrend component captures this momentum while the range filters prevent premature entries during pullbacks. Smart Money Theory The SMC elements are based on the concept that institutional traders (banks, hedge funds) leave footprints in the form of: Order Blocks: Areas where large orders were placed Fair Value Gaps: Inefficient price movements that may be revisited Liquidity Sweeps: Stop hunts before continuation (EQH/EQL) Volatility-Based Position Sizing Using ATR for stop-loss placement ensures that stop distances adapt to current market conditions: Tight stops in low volatility (avoids excessive risk) Wider stops in high volatility (avoids premature stop-outs) PERFORMANCE EXPECTATIONS Realistic Expectations Win Rate: Expected: 45-55% (trend-following systems rarely exceed 60%) Higher win rates on trending days Lower win rates during consolidation (even with ADX filter) Risk-Reward Ratio: Target: 1.5:1 minimum (TP2) Achievable: 2:1 to 3:1 on strong trends Drawdowns: Normal: 10-15% of account during choppy periods Maximum: Should not exceed 20% with proper risk management Optimization Tips Backtesting Recommendations: Test on at least 1 year of historical data Include different market conditions (trending, ranging, volatile) Adjust SuperTrend sensitivity per instrument Optimize ADX threshold for your specific market Record trades to identify personal execution errors FREQUENTLY ASKED QUESTIONS Q: Can I use this for automated trading? A: The indicator provides signals, but you'll need to code a strategy script separately for automation. The signals can trigger alerts that connect to trading bots. Q: Why do I see conflicting signals? A: This is normal during transition periods. Wait for all confirmation layers to align before entering. Q: How often should I expect signals? A: Depends on timeframe and market conditions. On 5m charts during trending markets: 3-7 quality setups per session. Q: Can I use only some features? A: Yes, all components can be toggled on/off. However, the system works best with all confirmations active. Q: What's the difference between internal and swing structures? A: Internal = minor price structures (smaller pivots). Swing = major price structures (larger pivots). Both provide different levels of confirmation. DISCLAIMER This indicator is a tool for technical analysis and should not be the sole basis for trading decisions. Past performance does not guarantee future results. Always: Use proper risk management Test on demo accounts first Never risk more than you can afford to lose Combine with fundamental analysis when applicable Understand that no indicator is 100% accurate License: Mozilla Public License 2.0 Author: DrFXGOD VERSION HISTORY & UPDATES Initial Release - Version 1.0 Integrated SuperTrend, Range Filters, ADX, SMC concepts ATR-based risk management Multi-timeframe support Customizable visual elements SUPPORT & DOCUMENTATION For questions, suggestions, or bug reports, please comment on the script page or contact the author through TradingView. Additional Resources: Smart Money Concepts: Research ICT (Inner Circle Trader) materials ATR and Volatility: Refer to Wilder's original ATR documentation SuperTrend Indicator: Study original SuperTrend strategy papers
Pine Script® 인디케이터
abidevendar5454의
3
Moving Average Trend Strategy V4.1 — Revised Version (Selectable✅ **Version Notes (V4.0)** | Feature | Description | | --------------------------------------- | -------------------------------------------------------- | | 🧠 **Moving Average Type Options** | Choose from EMA / SMA / HMA / WMA | | 🧱 **Take-Profit / Stop-Loss Switches** | Can be enabled or disabled independently | | ⚙️ **Add Position Function** | Can be enabled or disabled independently | | 🔁 **Add Position Signal Source** | Selectable between MA Crossover / MACD / RCI / RSI | | 💹 **Adjustable Parameters** | All periods and percentages are customizable in settings | --- ✅ **Update Summary:** | Function | Description | | -------------------------------------- | --------------------------------------------------------------------- | | **MA Type Selection** | Choose EMA / SMA / HMA / WMA in chart settings | | **Take-Profit / Stop-Loss Percentage** | Configurable in the “Take-Profit & Stop-Loss” group | | **Add / Reduce Position Percentage** | Adjustable separately in the “Add/Reduce Position” group | | **MA Periods** | Customizable in the “Moving Average Parameters” section | | **Code Structure** | Logic unchanged — only parameterization and selection functions added | --- ### **Strategy Recommendations:** * **Trending Market:** Prefer EMA trend tracking or SAR indicators * **Range-Bound Market:** Use ATR-based volatility stop-loss * **Before Major Events:** Consider option hedging * **Algorithmic Trading:** Recommend ATR + partial take-profit combination strategy --- ### **Key Parameter Optimization Logic:** * Backtest different **ATR multipliers** (2–3× ATR) * Test **EMA periods** (10–50 periods) * Optimize **partial take-profit ratios** * Adjust **maximum drawdown tolerance** (typically 30–50% of profit) --- ### **Risk Control Tips:** * Avoid overly tight stop-losses that trigger too frequently * During strong trends, consider widening take-profit targets * Confirm trend continuation with **volume analysis** * Adjust parameters based on **timeframe** (e.g., Daily vs Hourly) --- ### **Practical Example (Forex: EUR/USD):** * **Entry:** Go long on breakout above 1.1200 * **Initial Stop-Loss:** 1.1150 (50 pips) * **When profit reaches 1.1300:** * Close 50% of position * Move stop-loss to 1.1250 (lock in 50 pips profit) * **When price rises to 1.1350:** * Move stop-loss to 1.1300 (lock in 100 pips profit) * **Final Outcome:** * Price retraces to 1.1300, triggering take-profit This method secured over **80% of trend profits** during the 2023 EUR rebound, capturing **23% more profit** compared to fixed take-profit strategies (based on backtest results).
Pine Script™ 전략
shuan789의