지금 시작

스크립트에서 "session"에 대해 찾기

Session SFPThis script is a powerful, multi-timeframe tool designed to identify high-probability Swing Failure Patterns (SFPs) at key historical levels. Instead of looking for traditional "pivots" (like a 3-bar swing), this indicator finds the actual high and low of a previous higher-timeframe (HTF) bar (e.g., the previous weekly high/low) and waits for a lower-timeframe (LTF) candle to sweep that level and fail. This allows you to spot liquidity sweeps and potential reversals at significant, structural price points. How It Works The indicator's logic is based on a simple, two-timeframe process: Level Detection: First, it finds the high and low of the previous bar on your chosen "Level Timeframe" (e.g., W for Weekly, D for Daily). It plots these as small 'x' markers on your chart. SFP Identification: Second, it watches price action on a lower "SFP Timeframe" (e.g., 240 for 4H). A potential SFP is identified when a candle's wick sweeps above a key high or below a key low. Confirmation: The SFP is only confirmed after the SFP candle closes back below the high (for a bearish SFP) or above the low (for a bullish SFP). It then waits for a set number of "Confirmation Bars" to pass. If price does not close back over the level during this window, the signal is locked in, and a label is printed. How to Use (Key Settings) Level Timeframe (Most Important): This is the timeframe for the levels you want to trade. Set this to W to find SFPs of the previous weekly high/low. Set it to D to find SFPs of the previous daily high/low. SFP Timeframe: This is the timeframe you want to use to find the SFP candle itself. This should be lower than your Level Timeframe (e.g., 240 or 60). Level Lookback: This controls how many old levels the script will track. A value of 10 on a W Level Timeframe will track the highs and lows of the last 10 weeks. Confirmation Bars: This is your "patience" filter. It's the number of SFP Timeframe bars that must close without reclaiming the level after the SFP. A value of 0 will confirm the SFP immediately on the candle's close. Enable Wick % Filter: A quality filter. If checked, this ensures the SFP candle's rejection wick is a significant percentage of the candle's total range. Chart Visuals 'x' Markers: These are the historical highs and lows from your "Level Timeframe". You can turn these on or off in the settings. SFP Label: When an SFP is fully confirmed, a label (Bearish SFP or Bullish SFP) will appear, detailing the level that was swept and the timeframes used. SFP Line: A solid horizontal line is drawn from the 'x' marker to the SFP candle to highlight the sweep. Colored Boxes (Optional): If you are viewing a chart timeframe lower than your "SFP Timeframe", you can enable background boxes to highlight the exact SFP candle and its confirmation bars.
Pine Script® 인디케이터
nickbonenkamp의
Session Moving AveragesAdds EMAs and SMAs to chart using 8am-8pm EST values. Completely configurable in settings. Some platforms allow users to configure what time frame they would like to view market data. One popular selection is 8am-8pm EST as 8am is when institutional orders go through. An argument can be made that price action before 8am EST is not valid yet moving averages will use that data. This matters less for shorter moving averages such as a 9 or 20 ema, but it dramatically changes the 200 or the 50 sma for example. This script allows you to ignore that pre-market data (or any data you choose to configure in the settings) and select up to 3 moving averages (either Exponential or Simple) for a set time. By default the moving averages include the 9-ema (gray), 20-ema (green), and 200-sma (purple) and is set to 8am-8pm EST This is configurable in the settings including the time frame you would like the moving averages to start using market data. By default the script will use your charts timeframe. You are able to use multi-time frames with this script just scroll down to "timeframe", then click "chart" in settings... this will then allow you to select a timeframe. A popular choice is 5-minute value of 8am-8pm EST moving averages. This means regardless of the time frame you are on (sub 1-minute, 1-minute, etc.) the script will display 5-minute data. Final note: In settings you are able to turn on/off shapes (the gray lines at the bottom) which shows when the data is being used. This can be helpful on certain tickers that trade continuously such as /ES or /NQ.
Pine Script® 인디케이터
Scott_II의
4
Session Time RangesHave you ever wondered if you are trading at the right time of the day or feel like all the good trades happen when you are sleeping? Well now you can check your theory :) This Script allows you to highlight a time range on your chart over a 24hour time period. For example 3AM to 6AM The script has two time variables, set your start time and end time based on a 24 hour clock and set the time zone offset variable to match your charts time zone. For example New York -4 (for utc just enter 0 for no offset ) This is a quick script I put together so hopefully it is error free enjoy :)
Pine Script® 인디케이터
melodicfish의
HTF Candles Pro by MurshidFx# HTF Candles Pro by MurshidFx ## Professional Trading Indicator for Multi-Timeframe Market Structure Analysis **HTF Candles Pro** is an advanced, open-source trading indicator that synthesizes Higher Timeframe (HTF) candle visualization with CISD (Change in State of Delivery) detection, providing comprehensive market structure analysis across multiple timeframes. Designed for traders at all experience levels—from scalpers to swing traders—this tool enables precise alignment of trades with higher timeframe momentum while identifying critical market structure transitions. --- ## Core Functionality This indicator integrates three essential analytical frameworks: - **HTF Candle Visualization** – Inspired by the innovative work of Fadi x MMT's MTF Candles indicator - **CISD Detection System** – Algorithmic identification of significant market structure reversals - **Intelligent Session Level Management** – Automated consolidation of overlapping session markers for enhanced chart clarity The result is a sophisticated yet streamlined analytical tool that delivers actionable market insights with minimal visual complexity. --- ## Feature Set ### Higher Timeframe Candle Analysis Monitor higher timeframe price action seamlessly without chart switching. The indicator employs automatic HTF selection based on current timeframe, with manual override capability. **Components:** - **Primary HTF Display**: Automatically positioned adjacent to current price action - **Secondary HTF Display**: Optional dual-timeframe analysis capability - **Adaptive Time Labeling**: Context-aware formatting (intraday times, day names, week numbers) - **Real-Time Countdown**: Optional timer displaying remaining time until HTF candle close - **Customizable Color Schemes**: Full color customization for bullish and bearish candles ### CISD Detection (Change in State of Delivery) The CISD system identifies critical inflection points where market structure undergoes directional change, signaling potential trend reversals or continuations. **Mechanism:** - **Market Structure Monitoring**: Continuous tracking of swing highs and lows - **Liquidity Sweep Detection**: Identification of stop-hunt patterns preceding reversals - **Reversal Confirmation**: Validation-based CISD level plotting upon structure break confirmation - **Clear Visual Signals**: Bullish CISD (blue) and bearish CISD (red) demarcation - **Optimized Display**: Default 5-bar line length (adjustable) minimizes chart clutter **Technical Definition:** CISD occurs when price breaches structure in one direction—typically sweeping liquidity and triggering stops—then reverses to break structure in the opposite direction, indicating a fundamental shift in market delivery bias. ### Intelligent Session Level Management Eliminates visual clutter caused by overlapping session opens at identical price levels through automated consolidation. **Functionality:** - **Automatic Consolidation**: Merges multiple concurrent session opens into single reference lines - **Combined Labeling**: Creates unified labels (e.g., "Week-Day Open," "4H-Day-Week Open") - **Enhanced Clarity**: Maintains professional chart aesthetics while preserving all relevant information **Supported Session Intervals:** - 30-Minute Opens - 4-Hour Opens - Daily Opens - Weekly Opens - Monthly Opens ### Advanced Market Structure Tools **Liquidity Sweep Identification:** Highlights price wicks extending beyond previous HTF extremes that close within range—characteristic liquidity grab patterns. **HTF Midpoint Reference:** Displays the 50% retracement level of the most recent completed HTF candle, serving as a key reference for entries and profit targets. **HTF Opening Price:** Tracks current HTF candle open price, frequently functioning as dynamic support or resistance. **Interval Demarcation:** Visual separators defining HTF period boundaries for enhanced temporal clarity. ### Information Dashboard Compact, customizable dashboard displaying: - Current symbol and active timeframe - HTF candle countdown timer - Active trading session (Asia/London/New York) - Current date and time Flexible positioning: configurable for any chart corner. --- ## Default Configuration Optimized settings for immediate professional-grade chart presentation: - **Secondary HTF**: Disabled (enable for multi-timeframe comparative analysis) - **CISD Bullish Color**: Blue (#0080ff) – optimal visibility with reduced eye strain - **CISD Line Width**: 1 pixel – subtle yet discernible - **CISD Line Length**: 5 bars – balanced visibility without excessive clutter - **Session Opens**: Smart consolidation enabled – eliminates overlapping labels --- ## Application Strategies ### Trend Following 1. Monitor CISD confirmations aligned with HTF trend direction 2. Utilize HTF candle color for directional bias confirmation 3. Execute entries on pullbacks to HTF midpoint or open price levels ### Reversal Trading 1. Identify counter-trend CISD formations 2. Await HTF candle close confirming new directional bias 3. Use session opens as secondary confirmation levels ### Scalping 1. Trade exclusively in HTF candle direction 2. Employ lower timeframe CISD signals for precise entry timing 3. Target HTF midpoint or subsequent session open levels ### Structure-Based Trading 1. Mark liquidity sweep levels as potential reversal zones 2. Monitor CISD formations at key session opens 3. Confirm trend changes via HTF candle closes --- ## Customization Parameters Comprehensive customization options: - **Color Schemes**: Independent control of bull/bear candles, borders, CISD signals, session levels - **Dimensional Settings**: Candle width, line thickness, label sizing - **Display Quantities**: HTF candle count (1-10 range) - **Positioning**: Candle offset, dashboard placement, label positioning - **Line Styles**: Solid, dashed, or dotted rendering - **Timeframe Selection**: Manual secondary HTF specification --- ## Attribution **HTF Candle Visualization:** The HTF candle rendering methodology draws inspiration from Fadi x MMT's "MTF Candles" indicator. Their elegant implementation of multi-timeframe candle visualization provided valuable reference for this development. Recognition and appreciation to their contribution to the TradingView community. **CISD Detection:** Proprietary CISD detection algorithm engineered to identify market structure transitions with high signal clarity and reduced false positive rate. **Session Level Consolidation:** Custom-developed intelligent grouping system addressing the common challenge of overlapping session labels at coincident price levels. --- ## Open Source License This indicator is released as open source for the TradingView community. Permitted uses include: - Implementation in live trading - Educational study for Pine Script learning - Personal modification and customization - Distribution among trading communities Community contributions, improvements, and derivative works are welcomed and encouraged. --- ## Implementation Guide 1. **Installation**: Click "Add to Chart" 2. **Configuration Access**: Open indicator settings panel 3. **Initial Use**: Default settings provide optimal starting configuration 4. **Optional Features**: Enable secondary HTF for multi-timeframe analysis 5. **Theme Integration**: Adjust color schemes to match chart aesthetics --- ## Best Practices **Timeframe Optimization:** - 1-5 minute charts: Optimal with 15m or 1H HTF - 15-30 minute charts: Effective with 4H HTF - 1-4 hour charts: Suitable for Daily HTF - Daily charts: Best utilized with Weekly/Monthly HTF **CISD Trading Guidelines:** - Require CISD confirmation before position entry - Prioritize CISD signals at significant levels (session opens, HTF midpoints) - Confirm CISD direction aligns with HTF candle bias - Apply contextual filtering—not all CISD signals warrant trades **Session Open Strategy:** - Weekly opens typically provide robust support/resistance - Daily opens offer reliable intraday reference points - 4-Hour opens effective for short-term scalping - Consolidated labels (e.g., "Week-Day Open") indicate confluence zones with elevated significance --- ## Technical Specifications **Performance Optimization:** - Intelligent object management prevents TradingView rendering limits - Efficient array processing for session consolidation - Proper memory management through systematic object deletion - Consistent performance across all timeframe ranges **Compatibility:** - Universal timeframe support - Optimized for all market types (forex, stocks, crypto, futures) - Minimal computational overhead --- ## Support & Development **Feedback Channels:** - Comment section for user feedback and suggestions - Bug reports and feature requests welcomed - Community-driven enhancement consideration **Documentation:** - Well-commented source code for learning purposes - Clear section organization for easy navigation - Comprehensive type definitions for structural clarity - Educational value for market structure concept understanding --- ## Version Information **Version:** 1.0 (Initial Release) **License:** Open Source **Category:** Multi-Timeframe Analysis | Market Structure **Compatibility:** All Timeframes **Language:** Pine Script v5 --- **For optimal results:** - Provide feedback through comments - Share with trading communities - Submit enhancement suggestions - Report technical issues for resolution **Professional Support:** Available through comment section for technical inquiries, implementation questions, and feature requests. --- *Developed for the TradingView trading community | Professional-grade market structure analysis | Open source contribution*
Pine Script® 인디케이터
gilani9393의
[PickMyTrade] Trendline Strategy# PickMyTrade Advanced Trend Following Strategy for Long Positions | Automated Trading Indicator **Optimize Your Trading with PickMyTrade's Professional Trend Strategy - Auto-Execute Trades with Precision** --- ## Table of Contents 1. (#overview) 2. (#why-this-strategy-makes-money) 3. (#key-features) 4. (#how-it-works) 5. (#strategy-settings--configuration) 6. (#pickmytrade-integration) 7. (#advanced-features) 8. (#risk-management) 9. (#best-practices) 10. (#performance-optimization) 11. (#getting-started) 12. (#faq) --- ## Overview The **PickMyTrade Advanced Trend Following Strategy** is a sophisticated, open-source Pine Script indicator designed for traders seeking consistent profits through trend-based long positions. This powerful algorithm identifies high-probability entry points by detecting valid trendlines with multiple touch confirmations, ensuring you only enter trades when the trend is strongly established. ### What Makes This Strategy Unique? - **Multi-Trendline Detection**: Simultaneously tracks multiple downtrend breakouts for increased trading opportunities - **Intelligent Entry Validation**: Requires multiple price touches (configurable) to confirm trendline validity - **Flexible Take Profit Methods**: Choose from Risk/Reward Ratio, Lookback Candles, or Fibonacci-based exits - **Automated Risk Management**: Built-in position sizing based on dollar risk per trade - **PickMyTrade Ready**: Seamlessly integrate with PickMyTrade for fully automated trade execution **Perfect for**: Swing traders, trend followers, futures traders, and anyone using PickMyTrade for automated trading execution. --- ## Why This Strategy Makes Money ### 1. **Breakout Trading Edge** The strategy profits by identifying when price breaks above established downtrend resistance lines. These breakouts often signal: - Shift in market sentiment from bearish to bullish - Strong buying momentum entering the market - High probability of continued upward movement ### 2. **Trend Confirmation Filter** Unlike simple breakout strategies, this requires **multiple touches** (default: 3) on the trendline before considering it valid. This eliminates: - False breakouts from weak trendlines - Choppy, sideways markets with no clear trend - Low-quality setups that lead to losses ### 3. **Dynamic Risk-Reward Optimization** The strategy automatically calculates: - **Optimal position sizing** based on your risk tolerance ($100 default) - **Stop loss placement** using recent pivot lows (not arbitrary levels) - **Take profit targets** using either R:R ratios (1.5:1 default) or Fibonacci extensions **Expected Profitability**: With proper settings, traders typically achieve: - Win rate: 45-60% (depending on market conditions) - Risk/Reward: 1.5:1 to 2.5:1 (configurable) - Monthly returns: 5-15% (varies by market and risk settings) ### 4. **Fibonacci Profit Scaling** The advanced Fibonacci mode allows you to: - Take partial profits at multiple levels (0.618, 1.0, 1.312, 1.618) - Lock in gains while letting winners run - Maximize profits during strong trending moves --- ## Key Features ### Trend Detection & Validation ✅ **Dynamic Trendline Drawing**: Automatically identifies and extends downtrend resistance lines ✅ **Touch Validation**: Configurable number of touches (1-10) to confirm trendline strength ✅ **Valid Percentage Buffer**: Allows minor price deviations (default 0.1%) for more realistic trendlines ✅ **Pivot-Based Validation**: Optional extra filter using smaller pivot points for precision ### Position Management ✅ **Multi-Position Support**: Trade up to 1000 positions simultaneously (pyramiding) ✅ **Single or Multi-Trend Mode**: Track one primary trend or multiple concurrent trends ✅ **Dollar-Based Position Sizing**: Risk fixed dollar amount per trade (not percentage of account) ✅ **Automatic Quantity Calculation**: Determines optimal contract size based on risk and stop distance ### Take Profit Methods (3 Options) #### 1. **Risk/Reward Ratio** (Recommended for Beginners) - Set desired R:R (default 1.5:1) - Simple, consistent profit targets - Works well in trending markets #### 2. **Lookback Candles** (For Swing Traders) - Exits when price makes new low over X candles (default 10) - Adapts to market volatility - Best for capturing extended moves #### 3. **Fibonacci Extensions** (For Advanced Traders) - Up to 4 profit targets: 61.8%, 100%, 131.2%, 161.8% - Automatically scales out of positions - Maximizes gains during strong trends ### Stop Loss Options ✅ **Pivot-Based Stop Loss**: Uses recent pivot lows for logical stop placement ✅ **Buffer/Offset**: Add extra distance (in ticks) below pivot for safety ✅ **Trailing Stop**: Optional feature to lock in profits as trade moves in your favor ✅ **Enable/Disable Toggle**: Full control over stop loss activation ### Session Control ✅ **Time-Based Trading**: Limit trades to specific hours (e.g., 9:00 AM - 6:00 PM) ✅ **Auto-Close at Session End**: Automatically closes all positions outside trading hours ✅ **Works on All Timeframes**: Intraday and higher timeframes supported --- ## How It Works ### Step-by-Step Trade Logic #### 1. **Trendline Identification** The strategy scans for pivot highs that are **lower** than the previous pivot high, indicating a downtrend. It then: - Draws a trendline connecting these pivot points - Extends the line forward to current price - Validates the line by checking how many candles touched it #### 2. **Entry Trigger** A long position is entered when: - Price closes **above** the validated trendline (breakout) - Session time filter is met (if enabled) - Maximum position limit not exceeded - Sufficient risk capital available for position sizing #### 3. **Stop Loss Calculation** The strategy looks backward to find the most recent pivot low that is: - Below current price - A logical support level - Applies optional buffer/offset for safety - Uses this level to calculate position size #### 4. **Take Profit Execution** Depending on your selected method: - **R:R Mode**: Calculates TP as entry + (entry - SL) × ratio - **Lookback Mode**: Exits when price makes new low over specified candles - **Fibonacci Mode**: Sets 4 profit targets based on Fibonacci extensions from swing high to stop loss #### 5. **Trade Management** Once in position: - Monitors stop loss for risk protection - Tracks take profit levels for exit signals - Optional trailing stop to lock in profits - Closes all trades at session end (if enabled) --- ## Strategy Settings & Configuration ### Trendline Settings | Parameter | Default | Range | Description | Impact on Trading | |-----------|---------|-------|-------------|-------------------| | **Pivot Length For Trend** | 15 | 5-50 | Bars to left/right for pivot detection | Lower = More signals (noisier), Higher = Fewer signals (stronger trends) | | **Touch Number** | 3 | 2-10 | Required touches to validate trendline | Lower = More trades (less reliable), Higher = Fewer trades (more reliable) | | **Valid Percentage** | 0.1% | 0-5% | Allowed deviation from trendline | Higher = More lenient validation, more trades | | **Enable Pivot To Valid** | False | True/False | Extra validation using smaller pivots | True = Stricter filtering, fewer but higher quality trades | | **Pivot Length For Valid** | 5 | 3-15 | Pivot length for extra validation | Smaller = More precise validation | **Recommendation**: Start with defaults. In choppy markets, increase touch number to 4-5. In strongly trending markets, reduce to 2. ### Position Management | Parameter | Default | Range | Description | Impact on Trading | |-----------|---------|-------|-------------|-------------------| | **Enable Multi Trend** | True | True/False | Track multiple trendlines simultaneously | True = More opportunities, False = One trade at a time | | **Position Number** | 1 | 1-1000 | Maximum concurrent positions | Higher = More capital deployed, more risk | | **Risk Amount** | $100 | $10-$10,000 | Dollar risk per trade | Higher = Larger positions, more P&L per trade | | **Enable Default Contract Size** | False | True/False | Use 1 contract if calculated size ≤1 | True = Always enter (even micro accounts) | **Money Management Tip**: Risk 1-2% of your account per trade. If you have $10,000, set Risk Amount to $100-$200. ### Take Profit Settings | Parameter | Default | Options | Description | Best For | |-----------|---------|---------|-------------|----------| | **Set TP Method** | RiskAwardRatio | RiskAwardRatio / LookBackCandles / Fibonacci | Choose exit strategy | Beginners: R:R, Swing: Lookback, Advanced: Fib | | **Risk Award Ratio** | 1.5 | 1.0-5.0 | Target profit as multiple of risk | Higher = Bigger wins but lower win rate | | **Look Back Candles** | 10 | 5-50 | Exit when price makes new low over X bars | Smaller = Quicker exits, Larger = Let winners run | | **Source for TP** | Close | Close / High-Low | Use close or high/low for exit signals | Close = More conservative | **Profitability Guide**: - **Conservative**: R:R = 1.5, Lookback = 10 - **Balanced**: R:R = 2.0, Lookback = 15 - **Aggressive**: R:R = 2.5, Fibonacci mode with 1.618 target ### Stop Loss Settings | Parameter | Default | Range | Description | Impact on Trading | |-----------|---------|-------|-------------|-------------------| | **Turn On/Off SL** | True | True/False | Enable stop loss | **Always use True** for risk protection | | **Pivot Length for SL** | 3 | 2-10 | Pivot length for stop placement | Smaller = Tighter stops, Larger = Wider stops | | **Buffer For SL** | 0.0 | 0-50 | Extra distance below pivot (ticks) | Higher = Safer but lower R:R | | **Turn On/Off Trailing Stop** | False | True/False | Lock in profits as trade moves up | True = Protects profits, may exit early | **Risk Management Rule**: Never disable stop loss. Use buffer in volatile markets (5-10 ticks). ### Fibonacci Settings (When TP Method = Fibonacci) | Parameter | Default | Description | Profit Target | |-----------|---------|-------------|---------------| | **Fibonacci Level 1** | 0.618 | First profit target | 61.8% of swing range | | **Fibonacci Level 2** | 1.0 | Second profit target | 100% of swing range | | **Fibonacci Level 3** | 1.312 | Third profit target | 131.2% extension | | **Fibonacci Level 4** | 1.618 | Fourth profit target | 161.8% extension | | **Pivot Length for Fibonacci** | 15 | Pivot to find swing high | Higher = Bigger swings, wider targets | **Scaling Strategy**: Close 25% at each Fibonacci level to lock in profits progressively. ### Session Settings | Parameter | Default | Description | Use Case | |-----------|---------|-------------|----------| | **Enable Session** | False | Activate time filter | Day trading specific hours | | **Session Time** | 0900-1800 | Trading hours window | Avoid overnight risk | **Day Trader Setup**: Enable session = True, Set hours to 9:30-16:00 (US market hours) --- ## PickMyTrade Integration ### Automate Your Trading with PickMyTrade This strategy is **fully compatible with PickMyTrade**, the leading automation platform for TradingView strategies. Connect your broker account and let PickMyTrade execute trades automatically based on this strategy's signals. ### Why Use PickMyTrade? ✅ **Hands-Free Trading**: Never miss a signal, even while sleeping ✅ **Multi-Broker Support**: Works with Tradovate, NinjaTrader, TradeStation, and more ✅ **Instant Execution**: Alerts trigger trades in milliseconds ✅ **Risk Management**: Built-in position sizing and stop loss handling ✅ **Mobile Monitoring**: Track trades from your phone **Boom!** Your strategy is now fully automated. Every breakout signal will automatically execute a trade through your broker. ### PickMyTrade-Specific Features - **Dynamic Position Sizing**: The strategy calculates quantity based on your risk amount - **Automatic Stop Loss**: Pivot-based stops are sent to your broker automatically - **Take Profit Orders**: R:R and Fibonacci targets create limit orders - **Session Management**: Trades only during specified hours - **Multi-Position Support**: Handle multiple concurrent trades seamlessly **Pro Tip**: Start with paper trading or a demo account to test the automation before going live. --- ## Advanced Features ### 1. Multi-Trendline Mode (Enable Multi Trend = True) **What It Does**: Tracks up to 1000 trendlines simultaneously, entering positions as each one breaks out. **Benefits**: - More trading opportunities - Diversifies entry points across multiple trends - Catches every valid breakout in trending markets **When to Use**: - Strong trending markets (crypto bull runs, index rallies) - Longer timeframes (4H, Daily) - When you want maximum market exposure **Caution**: Can enter many positions quickly. Set appropriate Position Number limit and Risk Amount. ### 2. Single Trendline Mode (Enable Multi Trend = False) **What It Does**: Focuses on one primary trendline at a time. **Benefits**: - Cleaner, simpler execution - Easier to monitor and manage - Better for beginners - Lower capital requirements **When to Use**: - Choppy or ranging markets - Smaller accounts - When you prefer focused, quality over quantity trades ### 3. Fibonacci Profit Scaling **How It Works**: 1. At entry, the strategy finds the most recent swing high above current price 2. Calculates the range from swing high to stop loss 3. Projects 4 Fibonacci extensions: 61.8%, 100%, 131.2%, 161.8% 4. Exits when price reaches each level, then pulls back below it **Profit Maximization Strategy**: - Close 25% of position at each Fibonacci level - Let remaining portion target higher levels - Capture both quick profits and extended moves **Example Trade**: - Entry: $100 - Stop Loss: $95 (risk = $5) - Swing High: $110 - Range: $110 - $95 = $15 Fibonacci Targets: - 61.8% = $95 + ($15 × 0.618) = $104.27 (+4.27%) - 100% = $95 + ($15 × 1.0) = $110 (+10%) - 131.2% = $95 + ($15 × 1.312) = $114.68 (+14.68%) - 161.8% = $95 + ($15 × 1.618) = $119.27 (+19.27%) **Result**: Even if only first two targets hit, you lock in +7% average gain vs. -5% risk = 1.4:1 R:R ### 4. Trailing Stop Loss **What It Does**: After entry, if a new pivot low forms **above** your initial stop, the strategy moves your stop up to that level. **Benefits**: - Locks in profits as trade moves in your favor - Reduces risk to breakeven or better - Captures strong momentum moves **Drawback**: May exit profitable trades earlier during normal pullbacks. **Best Practice**: Use in strongly trending markets. Disable in choppy conditions. ### 5. Pivot Validation Filter **What It Does**: Adds extra requirement that a small pivot high must exist between the two trendline pivot points. **Benefits**: - Ensures trendline is a "true" resistance - Filters out random lines connecting arbitrary highs - Increases trade quality **When to Enable**: - High-volatility markets with many false breakouts - Lower timeframes (5min, 15min) where noise is common - When win rate is too low with default settings **Tradeoff**: Fewer signals, but higher win rate. ### 6. Session-Based Trading **What It Does**: Only enters trades during specified hours. Auto-closes all positions outside session. **Use Cases**: - **Day Trading**: 9:30 AM - 4:00 PM (avoid overnight gaps) - **European Hours**: 8:00 AM - 5:00 PM CET (trade London session) - **Crypto**: 24/7 trading or focus on US hours for liquidity **Risk Management**: Prevents holding positions through high-impact news events or market closes. --- ## Risk Management ### Position Sizing Formula The strategy uses **fixed dollar risk** position sizing: ``` Position Size = Risk Amount ÷ (Entry Price - Stop Loss) ÷ Point Value ``` **Example** (ES Futures): - Risk Amount: $100 - Entry: 4500 - Stop Loss: 4490 - Risk per contract: 10 points × $50/point = $500 - Position Size: $100 ÷ $500 = 0.2 contracts → Rounds to 0 (no trade) If `Enable Default Contract Size = True`, it would trade 1 contract instead. ### Risk Per Trade Recommendations | Account Size | Conservative (1%) | Moderate (2%) | Aggressive (3%) | |--------------|-------------------|---------------|-----------------| | $5,000 | $50 | $100 | $150 | | $10,000 | $100 | $200 | $300 | | $25,000 | $250 | $500 | $750 | | $50,000 | $500 | $1,000 | $1,500 | **Golden Rule**: Never risk more than 2% per trade. Even with 10 losses in a row, you'd only be down 20%. ### Maximum Drawdown Protection **Multi-Position Risk**: - If Position Number = 5 and Risk Amount = $100 - Maximum simultaneous risk = 5 × $100 = $500 - Ensure this is ≤ 5% of your total account **Daily Loss Limit**: - Set a mental stop: "If I lose $X today, I stop trading" - Typical limit: 3-5% of account per day - Prevents revenge trading and emotional decisions ### Stop Loss Best Practices 1. **Always Use Stops**: Never disable stop loss (enabledSL should always be True) 2. **Buffer in Volatile Markets**: Add 5-10 tick buffer to avoid stop hunts 3. **Respect Your Stops**: Don't manually override or move stops further away 4. **Wide Stops = Smaller Size**: If stop is far from entry, strategy automatically reduces position size --- ## Best Practices ### Optimal Timeframes | Timeframe | Trading Style | Position Number | Risk/Reward | Win Rate Expectation | |-----------|---------------|-----------------|-------------|----------------------| | 5-15 min | Scalping | 1-2 | 1.5:1 | 50-55% | | 30 min - 1H | Intraday | 2-3 | 2:1 | 55-60% | | 4H | Swing Trading | 3-5 | 2.5:1 | 60-65% | | Daily | Position Trading | 1-2 | 3:1 | 65-70% | **Recommendation**: Start with 1H or 4H charts for best balance of signals and reliability. ### Ideal Market Conditions **Best Performance**: - Strong trending markets (bull runs, clear directional bias) - After consolidation breakouts - Post-earnings or news catalysts driving sustained moves - Liquid markets with tight spreads **Avoid or Reduce Risk**: - Choppy, sideways-ranging markets - Low-volume periods (holidays, overnight sessions) - High-impact news events (FOMC, NFP, earnings) - Extreme volatility (VIX > 30) ### Backtesting Recommendations Before going live: 1. **Run 6-12 Months of Historical Data**: Ensure strategy performed well across different market regimes 2. **Check Key Metrics**: - Win Rate: Should be 45-65% depending on R:R - Profit Factor: Aim for > 1.5 - Max Drawdown: Should be < 20% of starting capital - Average Win/Loss Ratio: Should match your R:R setting 3. **Stress Test**: Test during known volatile periods (March 2020, Jan 2022, etc.) 4. **Forward Test**: Run on demo account for 1 month before real money ### Parameter Optimization **Don't Over-Optimize!** Avoid curve-fitting to past data. Instead: 1. **Start with Defaults**: Use recommended settings first 2. **Change One Parameter at a Time**: Isolate what improves performance 3. **Test on Out-of-Sample Data**: If settings work on 2023 data, test on 2024 data 4. **Focus on Robustness**: Settings that work across multiple markets/timeframes are best **Red Flags**: - Strategy works perfectly on historical data but fails live (over-fitting) - Tiny changes in parameters dramatically change results (unstable) - Requires exact values (e.g., pivot length must be exactly 17) (curve-fitted) --- ## Performance Optimization ### How to Increase Profitability #### 1. Optimize Risk/Reward Ratio - **Current**: 1.5:1 (default) - **Test**: 2:1, 2.5:1, 3:1 - **Impact**: Higher R:R = bigger wins but lower win rate - **Sweet Spot**: Usually 2:1 to 2.5:1 for trend strategies #### 2. Filter by Market Regime Add a trend filter to only trade in bull markets: - Use 200-period SMA: Only take longs when price > SMA(200) - Use ADX: Only trade when ADX > 25 (strong trend) - **Impact**: Fewer trades, but much higher win rate #### 3. Tighten Entry Requirements - Increase Touch Number from 3 to 4-5 - Enable Pivot To Valid = True - **Impact**: Fewer but higher quality signals #### 4. Use Fibonacci Scaling - Switch from R:R to Fibonacci method - Take partial profits at each level - **Impact**: Better average wins, smoother equity curve #### 5. Add Volume Confirmation Enhance entry signal by requiring: - Volume > Average Volume (indicates strong breakout) - Can add this as custom filter in Pine Script ### How to Reduce Risk #### 1. Lower Position Number - Default: 1 position at a time - Multi-trend: Limit to 2-3 max - **Impact**: Less simultaneous exposure, lower drawdowns #### 2. Reduce Risk Amount - Start with $50 per trade (0.5% of $10k account) - Gradually increase as you gain confidence - **Impact**: Smaller positions, slower growth but safer #### 3. Use Tighter Stops with Buffer - Set Pivot Length for SL = 2 (closer stop) - Add Buffer = 5-10 ticks (avoid premature stop-outs) - **Impact**: Smaller losses, but may get stopped out more often #### 4. Enable Session Filter - Only trade during liquid hours - Avoid overnight holds - **Impact**: No gap risk, more predictable fills --- ## Getting Started ### Quick Start Guide (5 Minutes) 1. **Copy the Strategy Code** - Open the `.txt` file provided - Copy all code to clipboard 2. **Add to TradingView** - Go to TradingView Pine Editor - Paste code - Click "Save" → Name it "PickMyTrade Trend Strategy" - Click "Add to Chart" 3. **Configure Basic Settings** - Open strategy settings (gear icon) - Set Risk Amount = 1% of your account ($100 for $10k) - Set Position Number = 1 (for beginners) - Keep all other defaults 4. **Backtest on Your Market** - Choose your instrument (ES, NQ, AAPL, BTC, etc.) - Select timeframe (start with 1H or 4H) - Review performance metrics in Strategy Tester tab 5. **Optimize (Optional)** - Adjust Touch Number (2-5) to balance signals vs. quality - Try different TP methods (R:R vs. Fibonacci) - Test on multiple timeframes 6. **Go Live** - If backtest looks good, start with small position size - Monitor first 5-10 trades closely - Scale up once confident in execution ### Integration with PickMyTrade (10 Minutes) 1. **Sign Up for PickMyTrade** - Visit (pickmytrade.trade) - Create free account - Connect your broker (Tradovate, NinjaTrader, etc.) 2. **Create TradingView Alert** - Set condition to strategy name - Add PickMyTrade webhook URL - Enable alert 3. **Test with Demo Account** - Let it run for a few days - Verify trades execute correctly - Check fills, stops, and targets 4. **Switch to Live Account** - Update account ID to live account - Start with minimum position size - Monitor closely for first week --- ### Technical Questions **Q: What does "Touch Number = 3" mean?** A: The trendline must have at least 3 candles touching or nearly touching it to be considered valid. **Q: Why am I getting no trades?** A: Trendline requirements may be too strict. Try: - Reduce Touch Number to 2 - Increase Valid Percentage to 0.5% - Disable Pivot To Valid - Check if price is in a trend (strategy won't trade sideways markets) **Q: Why is my position size 0?** A: Risk Amount is too small for the stop distance. Either: - Increase Risk Amount - Enable Default Contract Size = True (will use 1 contract minimum) - Use tighter stops (lower Pivot Length for SL) **Q: Can I trade both long and short?** A: Current code is long-only. You'd need to duplicate the logic for short trades (detect uptrend breakdowns). **Q: How do I change from TradingView strategy to indicator?** A: Change line 5 from `strategy(...)` to `indicator(...)`. Replace `strategy.entry()` and `strategy.exit()` with `alert()` calls. ### Risk Management Questions **Q: What's the maximum drawdown I should expect?** A: Typically 10-20% depending on settings. If experiencing > 25%, reduce position size or tighten filters. **Q: Should I risk more to make more money?** A: No. Risking 2% vs. 5% per trade doesn't triple your profits—it triples your risk of blowing up. Stick to 1-2% per trade. **Q: What if I hit 5 losses in a row?** A: Normal. Even with 60% win rate, losing streaks happen. Don't increase position size to "win it back." Stick to your risk plan. **Q: Do I need to watch the screen all day?** A: No, especially with PickMyTrade automation. Check positions 1-2 times per day. Overtrading kills profits. --- ## Disclaimer **Important Risk Disclosure**: Trading futures, stocks, forex, and cryptocurrencies involves substantial risk of loss and is not suitable for all investors. Past performance is not indicative of future results. The PickMyTrade Advanced Trend Following Strategy is provided for **educational purposes only** and should not be considered financial advice. **Key Risks**: - You can lose more than your initial investment - Backtested results may not reflect live trading performance - Market conditions change; no strategy works forever - Automation errors can occur (connectivity, bugs, etc.) **Before Trading**: - Consult a licensed financial advisor - Fully understand the strategy logic - Test on demo account for at least 1 month - Only risk capital you can afford to lose - Start with minimum position sizes **PickMyTrade**: This strategy is compatible with PickMyTrade but is not officially endorsed by PickMyTrade. The author is not affiliated with PickMyTrade. For PickMyTrade support, visit their official website. **License**: This strategy is open-source under Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0). You may modify and share, but not for commercial use. --- **Ready to automate your trading with PickMyTrade? Add this strategy to your TradingView chart today and start capturing profitable trend breakouts on autopilot!**
Pine Script™ 전략
bhavishyagoyal의
AdjCloseLibLibrary "AdjCloseLib" Library for producing gap-adjusted price series that removes intraday gaps at market open get_adj_close(_gapThresholdPct)   Calculates gap-adjusted close price by detecting and removing gaps at market open (09:15)   Parameters:      _gapThresholdPct (float) : Minimum gap size (in percentage) required to trigger adjustment. Example: 0.5 for 0.5%   Returns: Adjusted close price for the current bar (always returns a numeric value, never na) @details Detects gaps by comparing 09:15 open with previous day's close. If gap exceeds threshold, subtracts the gap value from all bars between 09:15-15:29 inclusive. State resets after session close. get_adj_ohlc(_gapThresholdPct)   Calculates gap-adjusted OHLC values by subtracting detected gap from all price components   Parameters:      _gapThresholdPct (float) : Minimum gap size (in percentage) required to trigger adjustment. Example: 0.5 for 0.5%   Returns: Tuple of @details Useful for calculating indicators (ATR, Heikin-Ashi, etc.) on gap-adjusted data. Applies the same gap adjustment logic to all OHLC components simultaneously.
Pine Script® 라이브러리
mudrakshqd의
AMDX/XAMD indicatorThe AMDX/XAMD indicator is designed to highlight specific trading sessions on the chart using distinct colors and optional vertical lines. Users can choose between two session types, AMDX or XAMD, and customize the visual appearance of the sessions. This tool is particularly useful for traders who want to analyze market behavior during different trading periods. Meaning of AMDX: A: Accumulation M: Manipulation D: Distribution X: Continuation Or Reversal Features: Session Highlighting: AMDX Sessions: Split into four segments - A, M, D, X. XAMD Sessions: Split into four segments - X, A, M, D. Customizable Colors: Choose individual colors for each session (A, M, D, X). Adjust the transparency of the session boxes for better visual integration with the chart. Drawing Styles: Box Style: Draws colored boxes around the session ranges. Line Style: Draws vertical lines at session start and end times. Vertical Lines: Option to enable or disable vertical lines at session boundaries. Customizable line style: Solid, Dotted, or Dashed. Session Labels: Automatically labels each session for easy identification. Customization Options: Session Type: Select between AMDX and XAMD session types. Colors: Set custom colors for each session and vertical lines. Border Width: Adjust the width of the session box borders. Transparency: Control the transparency level of the session boxes. Drawing Style: Choose between Box and Line styles for session representation. Vertical Lines: Enable or disable vertical lines and select the line style. How It Works: The indicator calculates the start and end times for each session based on the selected session type (AMDX or XAMD). It then draws either boxes or lines to highlight these sessions on the chart. The indicator also includes options to draw vertical lines at the session boundaries and labels each session with a corresponding letter (A, M, D, X). Use Cases: Market Session Analysis: Easily identify and analyze market behavior during different trading sessions. Intraday Trading: Helps intraday traders to focus on specific time segments of the trading day. Visual Segmentation: Provides a clear visual segmentation of the trading day, aiding in better decision-making. Times for AMDX/XAMD session: A Session: 18:00 (previous day) to 03:00 (current day) M Session: 03:00 to 09:00 D Session: 09:00 to 12:00 X Session: 12:00 to 18:00 Time for the XAMD session : X Session: 18:00 (previous day) to 00:00 (current day) A Session: 00:00 to 09:00 M Session: 09:00 to 12:00 D Session: 12:00 to 18:00
Pine Script® 인디케이터
Noxthinmarket의
3
Time Zone PSenseiTitle: Time Zone PS Indicator Author: Orlando Depablos Description: The Time Zone PS Indicator is a tool designed to help traders visualize different trading sessions on their charts. It allows users to specify three different trading sessions: the start of the day, the London session, and the New York (NYC) session. Each session is represented by a distinct color-coded background on the chart. Features: Customizable Sessions: Traders can define the start time and end time for each trading session according to their preference. This flexibility enables users to tailor the indicator to their specific trading strategies session time zones. Session Display Control: Users have the option to choose whether they want to display each trading session on the chart. This feature allows for a clutter-free charting experience, where traders can focus on the sessions relevant to their analysis. Visual Clarity: The indicator uses distinct colors for each trading session, making it easy for traders to differentiate between different time zones. This visual clarity aids in quickly identifying key trading periods throughout the day. How to Use: Setting Up Sessions: Use the input options to define the start and end times for the start of the day, the London session, and the NYC session. Adjust these values based on your trading preferences and time zone. Display Preferences: Toggle the display options to choose which trading sessions you want to visualize on the chart. This allows for a customizable charting experience tailored to your specific needs. Interpreting the Chart: Once configured, the indicator will display color-coded backgrounds on the chart corresponding to the defined trading sessions. Interpret these visual cues to identify key trading periods and plan your trading strategies accordingly. Originality: The Time Zone PS Indicator adds value to the TradingView community by providing traders with a customizable tool to visualize different trading sessions. While similar indicators exist, this script offers flexibility and ease of use, enhancing the charting experience for traders across various time zones. Use Cases: Session-Based Analysis: Traders can use the indicator to analyze price action within specific trading sessions, such as the London or NYC session, to identify potential trading opportunities. Time Zone Adjustment: Traders operating in different time zones can adjust the indicator settings to align with their local trading hours, ensuring accurate visualization of relevant trading sessions. Strategy Development: The indicator can aid in the development of trading strategies that capitalize on price movements during specific trading sessions, helping traders optimize their trading performance. Chart Visualization: The indicator provides a clear and concise visualization of different trading sessions on the chart. Each session is represented by a color-coded background, allowing traders to quickly identify key trading periods and make informed trading decisions.
Pine Script® 인디케이터
mc_bosc의
2
Volume Profile [Makit0]VOLUME PROFILE INDICATOR v0.5 beta Volume Profile is suitable for day and swing trading on stock and futures markets, is a volume based indicator that gives you 6 key values for each session: POC, VAH, VAL, profile HIGH, LOW and MID levels. This project was born on the idea of plotting the RTH sessions Value Areas for /ES in an automated way, but you can select between 3 different sessions: RTH, GLOBEX and FULL sessions. Some basic concepts: - Volume Profile calculates the total volume for the session at each price level and give us market generated information about what price and range of prices are the most traded (where the value is) - Value Area (VA): range of prices where 70% of the session volume is traded - Value Area High (VAH): highest price within VA - Value Area Low (VAL): lowest price within VA - Point of Control (POC): the most traded price of the session (with the most volume) - Session HIGH, LOW and MID levels are also important There are a huge amount of things to know of Market Profile and Auction Theory like types of days, types of openings, relationships between value areas and openings... for those interested Jim Dalton's work is the way to come I'm in my 2nd trading year and my goal for this year is learning to daytrade the futures markets thru the lens of Market Profile For info on Volume Profile: TV Volume Profile wiki page at www.tradingview.com For info on Market Profile and Market Auction Theory: Jim Dalton's book Mind over markets (this is a MUST) BE AWARE: this indicator is based on the current chart's time interval and it only plots on 1, 2, 3, 5, 10, 15 and 30 minutes charts. This is the correlation table TV uses in the Volume Profile Session Volume indicator (from the wiki above) Chart Indicator 1 - 5 1 6 - 15 5 16 - 30 10 31 - 60 15 61 - 120 30 121 - 1D 60 This indicator doesn't follow that correlation, it doesn't get the volume data from a lower timeframe, it gets the data from the current chart resolution. FEATURES - 6 key values for each session: POC (solid yellow), VAH (solid red), VAL (solid green), profile HIGH (dashed silver), LOW (dashed silver) and MID (dotted silver) levels - 3 sessions to choose for: RTH, GLOBEX and FULL - select the numbers of sessions to plot by adding 12 hours periods back in time - show/hide POC - show/hide VAH & VAL - show/hide session HIGH, LOW & MID levels - highlight the periods of time out of the session (silver) - extend the plotted lines all the way to the right, be careful this can turn the chart unreadable if there are a lot of sessions and lines plotted SETTINGS - Session: select between RTH (8:30 to 15:15 CT), GLOBEX (17:00 to 8:30 CT) and FULL (17:00 to 15:15 CT) sessions. RTH by default - Last 12 hour periods to show: select the deph of the study by adding periods, for example, 60 periods are 30 natural days and around 22 trading days. 1 period by default - Show POC (Point of Control): show/hide POC line. true by default - Show VA (Value Area High & Low): show/hide VAH & VAL lines. true by default - Show Range (Session High, Low & Mid): show/hide session HIGH, LOW & MID lines. true by default - Highlight out of session: show/hide a silver shadow over the non session periods. true by default - Extension: Extend all the plotted lines to the right. false by default HOW TO SETUP BE AWARE THIS INDICATOR PLOTS ONLY IN THE FOLLOWING CHART RESOLUTIONS: 1, 2, 3, 5, 10, 15 AND 30 MINUTES CHARTS. YOU MUST SELECT ONE OF THIS RESOLUTIONS TO THE INDICATOR BE ABLE TO PLOT - By default this indicator plots all the levels for the last RTH session within the last 12 hours, if there is no plot try to adjust the 12 hours periods until the seesion and the periods match - For Globex/Full sessions just select what you want from the dropdown menu and adjust the periods to plot the values - Show or hide the levels you want with the 3 groups: POC line, VA lines and Session Range lines - The highlight and extension options are for a better visibility of the levels as POC or VAH/VAL THANKS TO @watsonexchange for all the help, ideas and insights on this and the last two indicators (Market Delta & Market Internals) I'm working on my way to a 'clean chart' but for me it's not an easy path @PineCoders for all the amazing stuff they do and all the help and tools they provide, in special the Script-Stopwatch at that was key in lowering this indicator's execution time All the TV and Pine community, open source and shared knowledge are indeed the best way to help each other IF YOU REALLY LIKE THIS WORK, please send me a comment or a private message and TELL ME WHAT you trade, HOW you trade it and your FAVOURITE SETUP for pulling out money from the market in a consistent basis, I'm learning to trade (this is my 2nd year) and I need all the help I can get GOOD LUCK AND HAPPY TRADING
Pine Script® 인디케이터
makit0의
65
ICT Opening Range Projections (tristanlee85)ICT Opening Range Projections This indicator visualizes key price levels based on ICT's (Inner Circle Trader) "Opening Range" concept. This 30-minute time interval establishes price levels that the algorithm will refer to throughout the session. The indicator displays these levels, including standard deviation projections, internal subdivisions (quadrants), and the opening price. 🟪 What It Does The Opening Range is a crucial 30-minute window where market algorithms establish significant price levels. ICT theory suggests this range forms the basis for daily price movement. This script helps you: Mark the high, low, and opening price of each session. Divide the range into quadrants (premium, discount, and midpoint/Consequent Encroachment). Project potential price targets beyond the range using configurable standard deviation multiples . 🟪 How to Use It This tool aids in time-based technical analysis rooted in ICT's Opening Range model, helping you observe price interaction with algorithmic levels. Example uses include: Identifying early structural boundaries. Observing price behavior within premium/discount zones. Visualizing initial displacement from the range to anticipate future moves. Comparing price reactions at projected standard deviation levels. Aligning price action with significant times like London or NY Open. Note: This indicator provides a visual framework; it does not offer trade signals or interpretations. 🟪 Key Information Time Zone: New York time (ET) is required on your chart. Sessions: Supports multiple sessions, including NY midnight, NY AM, NY PM, and three custom timeframes. Time Interval: Supports multi-timeframe up to 15 minutes. Best used on a 1-minute chart for accuracy. 🟪 Session Options The Opening Range interval is configurable for up to 6 sessions: Pre-defined ICT Sessions: NY Midnight: 12:00 AM – 12:30 AM ET NY AM: 9:30 AM – 10:00 AM ET NY PM: 1:30 PM – 2:00 PM ET Custom Sessions: Three user-defined start/end time pairs. This example shows a custom session from 03:30 - 04:00: 🟪 Understanding the Levels The Opening Price is the open of the first 1-minute candle within the chosen session. At session close, the Opening Range is calculated using its High and Low . An optional swing-based mode uses swing highs/lows for range boundaries. The range is divided into quadrants by its midpoint ( Consequent Encroachment or CE): Upper Quadrant: CE to high (premium). Lower Quadrant: Low to CE (discount). These subdivisions help visualize internal range dynamics, where price often reacts during algorithmic delivery. 🟪 Working with Ranges By default, the range is determined by the highest high and lowest low of the 30-minute session: A range can also be determined by the highest/lowest swing points: Quadrants outline the premium and discount of a range that price will reference: Small ranges still follow the same algorithmic logic, but may be deemed insignificant for one's trading. These can be filtered in the settings by specifying a minimum ticks limit. In this example, the range is 42 ticks (10.5 points) but the indicator is configured for 80 ticks (20 points). We can select which levels will plot if the range is below the limit. Here, only the 00:00 opening price is plotted: You may opt to include the range high/low, quadrants, and projections as well. This will plot a red (configurable) range bracket to indicate it is below the limit while plotting the levels: 🟪 Price Projections Projections extend beyond the Opening Range using standard deviations, framing the market beyond the initial session and identifying potential targets. You define the standard deviation multiples (e.g., 1.0, 1.5, 2.0). Both positive and negative extensions are displayed, symmetrically projected from the range's high and low. The Dynamic Levels option plots only the next projection level once price crosses the previous extreme. For example, only the 0.5 STDEV level plots until price reaches it, then the 1.0 level appears, and so on. This continues up to your defined maximum projections, or indefinitely if standard deviations are set to 0. This example shows dynamic levels for a total of 6 sessions, only 1 of which meet a configured minimum limit of 50 ticks: Small ranges followed by significant displacement are impacted the most with the number of levels plotted. You may hide projections when configuring the minimum ticks. A fixed standard deviation will plot levels in both directions, regardless of the price range. Here, we plot up to 3.0 which hiding projections for small ranges: 🟪 Legal Disclaimer This indicator is provided for informational and educational purposes only. It is not financial advice, and should not be construed as a recommendation to buy or sell any financial instrument. Trading involves substantial risk, and you could lose a significant amount of money. Past performance is not indicative of future results. Always consult with a qualified financial professional before making any trading or investment decisions. The creators and distributors of this indicator assume no responsibility for your trading outcomes.
Pine Script® 인디케이터
tristanlee85의
10
Custom V2 KillZone US / FVG / EMAThis indicator is designed for traders looking to analyze liquidity levels, opportunity zones, and the underlying trend across different trading sessions. Inspired by the ICT methodology, this tool combines analysis of Exponential Moving Averages (EMA), session management, and Fair Value Gap (FVG) detection to provide a structured and disciplined approach to trading effectively. Indicator Features Identifying the Underlying Trend with Two EMAs The indicator uses two EMAs on different, customizable timeframes to define the underlying trend: EMA1 (default set to a daily timeframe): Represents the primary underlying trend. EMA2 (default set to a 4-hour timeframe): Helps identify secondary corrections or impulses within the main trend. These two EMAs allow traders to stay aligned with the market trend by prioritizing trades in the direction of the moving averages. For example, if prices are above both EMAs, the trend is bullish, and long trades are favored. Analysis of Market Sessions The indicator divides the day into key trading sessions: Asian Session London Session US Pre-Open Session Liquidity Kill Session US Kill Zone Session Each session is represented by high and low zones as well as mid-lines, allowing traders to visualize liquidity levels reached during these periods. Tracking the price levels in different sessions helps determine whether liquidity levels have been "swept" (taken) or not, which is essential for ICT methodology. Liquidity Signal ("OK" or "STOP") A specific signal appears at the end of the "Liquidity Kill" session (just before the "US Kill Zone" session): "OK" Signal: Indicates that liquidity conditions are favorable for trading the "US Kill Zone" session. This means that liquidity levels have been swept in previous sessions (Asian, London, US Pre-Open), and the market is ready for an opportunity. "STOP" Signal: Indicates that it is not favorable to trade the "US Kill Zone" session, as certain liquidity conditions have not been met. The "OK" or "STOP" signal is based on an analysis of the high and low levels from previous sessions, allowing traders to ensure that significant liquidity zones have been reached before considering positions in the "Kill Zone". Detection of Fair Value Gaps (FVG) in the US Kill Zone Session When an "OK" signal is displayed, the indicator identifies Fair Value Gaps (FVG) during the "US Kill Zone" session. These FVGs are areas where price may return to fill an "imbalance" in the market, making them potential entry points. Bullish FVG: Detected when there is a bullish imbalance, providing a buying opportunity if conditions align with the underlying trend. Bearish FVG: Detected when there is a bearish imbalance, providing a selling opportunity in the trend direction. FVG detection aligns with the ICT Silver Bullet methodology, where these imbalance zones serve as probable entry points during the "US Kill Zone". How to Use This Indicator Check the Underlying Trend Before trading, observe the two EMAs (daily and 4-hour) to understand the general market trend. Trades will be prioritized in the direction indicated by these EMAs. Monitor Liquidity Signals After the Asian, London, and US Pre-Open Sessions The high and low levels of each session help determine if liquidity has already been swept in these areas. At the end of the "Liquidity Kill" session, an "OK" or "STOP" label will appear: "OK" means you can look for trading opportunities in the "US Kill Zone" session. "STOP" means it is preferable not to take trades in the "US Kill Zone" session. Look for Opportunities in the US Kill Zone if the Signal is "OK" When the "OK" label is present, focus on the "US Kill Zone" session. Use the Fair Value Gaps (FVG) as potential entry points for trades based on the ICT methodology. The identified FVGs will appear as colored boxes (bullish or bearish) during this session. Use ICT Methodology to Manage Your Trades Follow the FVGs as potential reversal zones in the direction of the trend, and manage your positions according to your personal strategy and the rules of the ICT Silver Bullet method. Customizable Settings The indicator includes several customization options to suit the trader's preferences: EMA: Length, source (close, open, etc.), and timeframe. Market Sessions: Ability to enable or disable each session, with color and line width settings. Liquidity Signals: Customization of colors for the "OK" and "STOP" labels. FVG: Option to display FVGs or not, with customizable colors for bullish and bearish FVGs, and the number of bars for FVG extension. ------------------------------------------------------------------------------------------------------------- Cet indicateur est conçu pour les traders souhaitant analyser les niveaux de liquidité, les zones d’opportunité, et la tendance de fond à travers différentes sessions de trading. Inspiré de la méthodologie ICT, cet outil combine l'analyse des moyennes mobiles exponentielles (EMA), la gestion des sessions de marché, et la détection des Fair Value Gaps (FVG), afin de fournir une approche structurée et disciplinée pour trader efficacement.
Pine Script® 인디케이터
LauryGinal의
Opening Range Breakout with Multi-Timeframe Liquidity]═══════════════════════════════════════ OPENING RANGE BREAKOUT WITH MULTI-TIMEFRAME LIQUIDITY ═══════════════════════════════════════ A professional Opening Range Breakout (ORB) indicator enhanced with multi-timeframe liquidity detection, trading session visualization, volume analysis, and trend confirmation tools. Designed for intraday trading with comprehensive alert system. ─────────────────────────────────────── WHAT THIS INDICATOR DOES ─────────────────────────────────────── This indicator combines multiple trading concepts: - Opening Range Breakout (ORB) - Customizable time period detection with automatic high/low identification - Multi-Timeframe Liquidity - HTF (Higher Timeframe) and LTF (Lower Timeframe) key level detection - Trading Sessions - Tokyo, London, New York, and Sydney session visualization - Volume Analysis - Volume spike detection and strength measurement - Multi-Timeframe Confirmation - Trend bias from higher timeframes - EMA Integration - Trend filter and dynamic support/resistance - Smart Alerts - Quality-filtered breakout notifications ─────────────────────────────────────── HOW IT WORKS ─────────────────────────────────────── OPENING RANGE BREAKOUT (ORB): Concept: The Opening Range is a period at the start of a trading session where price establishes an initial high and low. Breakouts beyond this range often indicate the direction of the day's trend. Detection Method: - Default: 15-minute opening range (configurable) - Custom Range: Set specific session times with timezone support - Automatically identifies ORH (Opening Range High) and ORL (Opening Range Low) - Tracks ORB mid-point for reference Range Establishment: 1. Session starts (or custom time begins) 2. Tracks highest high and lowest low during the period 3. Range confirmed at end of opening period 4. Levels extend throughout the session Breakout Detection: - Bullish Breakout: Close above ORH - Bearish Breakout: Close below ORL - Mid-point acts as bias indicator Visual Display: - Shaded box during range formation - Horizontal lines for ORH, ORL, and mid-point - Labels showing level values - Color-coded fills based on selected method Fill Color Methods: 1. Session Comparison: - Green: Current OR mid > Previous OR mid - Red: Current OR mid < Previous OR mid - Gray: Equal or first session - Shows day-over-day momentum 2. Breakout Direction (Recommended): - Green: Price currently above ORH (bullish breakout) - Red: Price currently below ORL (bearish breakout) - Gray: Price inside range (no breakout) - Real-time breakout status MULTI-TIMEFRAME LIQUIDITY: Two-Tier System for comprehensive level identification: HTF (Higher Timeframe) Key Liquidity: - Default: 4H timeframe (configurable to Daily, Weekly) - Identifies major institutional levels - Uses pivot detection with adjustable parameters - Suitable for swing highs/lows where large orders rest LTF (Lower Timeframe) Key Liquidity: - Default: 1H timeframe (configurable) - Provides precision entry/exit levels - Finer granularity for intraday trading - Captures minor swing points Calculation Method: - Pivot high/low detection algorithm - Configurable left bars (lookback) and right bars (confirmation) - Timeframe multiplier for accurate multi-timeframe detection - Automatic level extension Mitigation System: - Tracks when levels are swept (broken) - Configurable mitigation type: Wick or Close-based - Option to remove or show mitigated levels - Display limit prevents chart clutter Asset-Specific Optimization: The indicator includes quick reference settings for different assets: - Major Forex (EUR/USD, GBP/USD): Default settings optimal - Crypto (BTC/ETH): Left=12, Right=4, Display=7 - Gold: HTF=1D, Left=20 TRADING SESSIONS: Four Major Sessions with Full Customization: Tokyo Session: - Default: 04:00-13:00 UTC+4 - Asian trading hours - Often sets daily range London Session: - Default: 11:00-20:00 UTC+4 - Highest liquidity period - Major institutional activity New York Session: - Default: 16:00-01:00 UTC+4 - US market hours - High-impact news events Sydney Session: - Default: 01:00-10:00 UTC+4 - Earliest Asian activity - Lower volatility Session Features: - Shaded background boxes - Session name labels - Optional open/close lines - Session high/low tracking with colored lines - Each session has independent color settings - Fully customizable times and timezones VOLUME ANALYSIS: Volume-Based Trade Confirmation: Volume MA: - Configurable period (default: 20) - Establishes average volume baseline - Used for spike detection Volume Spike Detection: - Identifies when volume exceeds MA * multiplier - Default: 1.5x average volume - Confirms breakout strength Volume Strength Measurement: - Calculates current volume as percentage of average - Shows relative volume intensity - Used in alert quality filtering High Volume Bars: - Identifies bars above 50th percentile - Additional confirmation layer - Indicates institutional participation MULTI-TIMEFRAME CONFIRMATION: Trend Bias from Higher Timeframes: HTF 1 (Trend): - Default: 1H timeframe - Uses EMA to determine intermediate trend - Compares current timeframe EMA to HTF EMA HTF 2 (Bias): - Default: 4H timeframe - Uses 50 EMA for longer-term bias - Confirms overall market direction Bias Classifications: - Bullish Bias: HTF close > HTF 50 EMA AND Current EMA > HTF1 EMA - Bearish Bias: HTF close < HTF 50 EMA AND Current EMA < HTF1 EMA - Neutral Bias: Mixed signals between timeframes EMA Stack Analysis: - Compares EMA alignment across timeframes - +1: Bullish stack (lower TF EMA > higher TF EMA) - -1: Bearish stack (lower TF EMA < higher TF EMA) - 0: Neutral/crossed Usage: - Filters false breakouts - Confirms trend direction - Improves trade quality EMA INTEGRATION: Dynamic EMA for Trend Reference: Features: - Configurable period (default: 20) - Customizable color and width - Acts as dynamic support/resistance - Trend filter for ORB trades Application: - Above EMA: Favor long breakouts - Below EMA: Favor short breakouts - EMA cross: Potential trend change - Distance from EMA: Momentum gauge SMART ALERT SYSTEM: Quality-Filtered Breakout Notifications: Alert Types: 1. Standard ORB Breakout 2. High Quality ORB Breakout Quality Criteria: - Volume Confirmation: Volume > 1.2x average - MTF Confirmation: Bias aligned with breakout direction Standard Alert: - Basic breakout detection - Price crosses ORH or ORL - Icon: 🚀 (bullish) or 🔻 (bearish) High Quality Alert: - Both volume AND MTF confirmed - Stronger probability setup - Icon: 🚀⭐ (bullish) or 🔻⭐ (bearish) Alert Information Includes: - Alert quality rating - Breakout level and current price - Volume strength percentage (if enabled) - MTF bias status (if enabled) - Recommended action One Alert Per Bar: - Prevents alert spam - Uses flag system to track sent alerts - Resets on new ORB session ─────────────────────────────────────── HOW TO USE ─────────────────────────────────────── OPENING RANGE SETUP: Basic Configuration: 1. Select time period for opening range (default: 15 minutes) 2. Choose fill color method (Breakout Direction recommended) 3. Enable historical data display if needed Custom Range (Advanced): 1. Enable Custom Range toggle 2. Set specific session time (e.g., 0930-0945) 3. Select appropriate timezone 4. Useful for specific market opens (NYSE, LSE, etc.) LIQUIDITY LEVELS SETUP: Quick Configuration by Asset: - Forex: Use default settings (Left=15, Right=5) - Crypto: Set Left=12, Right=4, Display=7 - Gold: Set HTF=1D, Left=20 HTF Liquidity: - Purpose: Major support/resistance levels - Recommended: 4H for day trading, 1D for swing trading - Use as profit targets or reversal zones LTF Liquidity: - Purpose: Entry/exit refinement - Recommended: 1H for day trading, 4H for swing trading - Use for position management Mitigation Settings: - Wick-based: More sensitive (default) - Close-based: More conservative - Remove or Show mitigated levels based on preference TRADING SESSIONS SETUP: Enable/Disable Sessions: - Master toggle for all sessions - Individual session controls - Show/hide session names Session High/Low Lines: - Enable to see session extremes - Each session has custom colors - Useful for range trading Customization: - Adjust session times for your broker - Set timezone to match your location - Customize colors for visibility VOLUME ANALYSIS SETUP: Enable Volume Analysis: 1. Toggle on Volume Analysis 2. Set MA length (20 recommended) 3. Adjust spike multiplier (1.5 typical) Usage: - Confirm breakouts with volume - Identify climactic moves - Filter false signals MULTI-TIMEFRAME SETUP: HTF Selection: - HTF 1 (Trend): 1H for day trading, 4H for swing - HTF 2 (Bias): 4H for day trading, 1D for swing Interpretation: - Trade only with bias alignment - Neutral bias: Be cautious - Bias changes: Potential reversals EMA SETUP: Configuration: - Period: 20 for responsive, 50 for smoother - Color: Choose contrasting color - Width: 1-2 for visibility Usage: - Filter trades: Long above, Short below - Dynamic support/resistance reference - Trend confirmation ALERT SETUP: TradingView Alert Creation: 1. Enable alerts in indicator settings 2. Enable ORB Breakout Alerts 3. Right-click chart → Add Alert 4. Select this indicator 5. Choose "Any alert() function call" 6. Configure delivery method (mobile, email, webhook) Alert Filtering: - All alerts include quality rating - High Quality alerts = Volume + MTF confirmed - Standard alerts = Basic breakout only ─────────────────────────────────────── TRADING STRATEGIES ─────────────────────────────────────── CLASSIC ORB STRATEGY: Setup: 1. Wait for opening range to complete 2. Price breaks and closes above ORH or below ORL 3. Volume > average (if enabled) 4. MTF bias aligned (if enabled) Entry: - Bullish: Buy on break above ORH - Bearish: Sell on break below ORL - Consider retest entries for better risk/reward Stop Loss: - Bullish: Below ORL or range mid-point - Bearish: Above ORH or range mid-point - Adjust based on volatility Targets: - Initial: Range width extension (ORH + range width) - Secondary: HTF liquidity levels - Final: Session high/low or major support/resistance ORB + LIQUIDITY CONFLUENCE: Enhanced Setup: 1. Opening range established 2. HTF liquidity level near or beyond ORH/ORL 3. Breakout occurs with volume 4. Price targets the liquidity level Entry: - Enter on ORB breakout - Target the HTF liquidity level - Use LTF liquidity for position management Management: - Partial profits at ORB + range width - Move stop to breakeven at LTF liquidity - Final exit at HTF liquidity sweep ORB REJECTION STRATEGY (Counter-Trend): Setup: 1. Price breaks above ORH or below ORL 2. Weak volume (below average) 3. MTF bias opposite to breakout 4. Price closes back inside range Entry: - Failed bullish break: Short below ORH - Failed bearish break: Long above ORL Stop Loss: - Beyond the failed breakout level - Or beyond session extreme Target: - Opposite end of opening range - Range mid-point for partial profit SESSION-BASED ORB TRADING: Tokyo Session: - Typically narrower ranges - Good for range trading - Wait for London open breakout London Session: - Highest volume and volatility - Strong ORB setups - Major liquidity sweeps common New York Session: - Strong trending moves - News-driven volatility - Good for momentum trades Sydney Session: - Quieter conditions - Suitable for range strategies - Sets up Tokyo session EMA-FILTERED ORB: Rules: - Only take bullish breaks if price > EMA - Only take bearish breaks if price < EMA - Ignore counter-trend breaks Benefits: - Reduces false signals - Aligns with larger trend - Improves win rate ─────────────────────────────────────── CONFIGURATION GUIDE ─────────────────────────────────────── OPENING RANGE SETTINGS: Time Period: - 15 min: Standard for most markets - 30 min: Wider range, fewer breakouts - 60 min: For slower markets or swing trades Custom Range: - Use for specific market opens - NYSE: 0930-1000 EST - LSE: 0800-0830 GMT - Set timezone to match exchange Historical Display: - Enable: See all previous session data - Disable: Cleaner chart, current session only LIQUIDITY SETTINGS: Left Bars (5-30): - Lower: More frequent, sensitive levels - Higher: Fewer, more significant levels - Recommended: 15 for most markets Right Bars (1-25): - Confirmation period - Higher: More reliable, less frequent - Recommended: 5 for balance Display Limit (1-20): - Number of active levels shown - Higher: More context, busier chart - Recommended: 7 for clarity Extension Options: - Short: Levels visible near formation - Current: Extended to current bar (recommended) - Max: Extended indefinitely VOLUME SETTINGS: MA Length (5-50): - Shorter: More responsive to spikes - Longer: Smoother baseline - Recommended: 20 for balance Spike Multiplier (1.0-3.0): - Lower: More sensitive spike detection - Higher: Only extreme spikes - Recommended: 1.5 for day trading MULTI-TIMEFRAME SETTINGS: HTF 1 (Trend): - 5m chart: Use 15m or 1H - 15m chart: Use 1H or 4H - 1H chart: Use 4H or 1D HTF 2 (Bias): - One level higher than HTF 1 - Provides longer-term context - Don't use same as HTF 1 EMA SETTINGS: Length: - 20: Responsive, more signals - 50: Smoother, stronger filter - 200: Long-term trend only Style: - Choose contrasting color - Width 1-2 for visibility - Match your trading style ─────────────────────────────────────── BEST PRACTICES ─────────────────────────────────────── Chart Timeframe Selection: - ORB Trading: Use 5m or 15m charts - Session Review: Use 1H or 4H charts - Swing Trading: Use 1H or 4H charts Quality Over Quantity: - Wait for high-quality alerts (volume + MTF) - Avoid trading every breakout - Focus on confluence setups Risk Management: - Position size based on range width - Wider ranges = smaller positions - Use stop losses always - Take partial profits at targets Market Conditions: - Best results in trending markets - Reduce position size in choppy conditions - Consider session overlaps for volatility - Avoid trading near major news if inexperienced Continuous Improvement: - Track win rate by session - Note which confluence factors work best - Adjust settings based on market volatility - Review performance weekly ─────────────────────────────────────── PERFORMANCE OPTIMIZATION ─────────────────────────────────────── This indicator is optimized with: - max_bars_back declarations for efficient processing - Conditional calculations based on enabled features - Proper memory management for drawing objects - Minimal recalculation on each bar Best Practices: - Disable unused features (sessions, MTF, volume) - Limit historical display to reduce rendering - Use appropriate timeframe for your strategy - Clear old drawing objects periodically ─────────────────────────────────────── EDUCATIONAL DISCLAIMER ─────────────────────────────────────── This indicator combines established trading concepts: - Opening Range Breakout theory (price action) - Liquidity level detection (pivot analysis) - Session-based trading (time-of-day patterns) - Volume analysis (confirmation technique) - Multi-timeframe analysis (trend alignment) All calculations use standard technical analysis methods: - Pivot high/low detection algorithms - Moving averages for trend and volume - Session time filtering - Timeframe security functions The indicator identifies potential trading setups but does not predict future price movements. Success requires proper application within a complete trading strategy including risk management, position sizing, and market context. ─────────────────────────────────────── USAGE DISCLAIMER ─────────────────────────────────────── This tool is for educational and analytical purposes. Opening Range Breakout trading involves substantial risk. The alert system and quality filters are designed to identify potential setups but do not guarantee profitability. Always conduct independent analysis, use proper risk management, and never risk capital you cannot afford to lose. Past performance does not indicate future results. Trading intraday breakouts requires experience and discipline. ─────────────────────────────────────── CREDITS & ATTRIBUTION ─────────────────────────────────────── ORIGINAL SOURCE: This indicator builds upon concepts from LuxAlgo's-ORB
Pine Script® 인디케이터
Fx-Jithin의
CANDLE RANGE THEORY (H1 Only)Hello traders. This indicator identifies CRT candles -Each candle is a range. -Each candle has its own po3. -Focus on specific times of the day. By recognizing the importance of time and price, we can capture high-quality trades. Together with HTF PD array, Look for 4-hour candles forming at specific times of the day. (1am - 5am - 9am EST) -After the 1st candle, wait for the 2nd candle to clear the high/low of the 1st candle and then close inside the 1st candle range at a specific time (1-5-9) and look for entries in the LTF Why choose 1 5 9 hours EST? ### **1. 1:00 AM (EST)** - **Trading Session:** This is the time between the Tokyo (Asian) session and the Sydney (Australian) session. The Asian market is very active. - **Characteristics:** - Liquidity: Moderate, as only the Asian market is active. - Volatility: Pairs involving JPY (Japanese Yen), AUD (Australian Dollar), and NZD (New Zealand Dollar) tend to have higher volatility. - Trading Opportunities: Suitable for traders who like to trade trends or news in the Asian region. - **Note:** Volatility may be lower than the London or New York session. ### **2. 5:00 AM (EST)** - **Trading Session:** This is the time near the end of the Tokyo session and the London (European) session is about to open. - **Characteristics:** - Liquidity: Starts to increase due to the preparation of the European market. - Volatility: This is the time between two trading sessions, there can be strong fluctuations, especially in major currency pairs such as EUR/USD, GBP/USD. - Trading opportunities: Suitable for breakout trading strategies when liquidity increases. - **Note:** The overlap between Tokyo and London can cause sudden fluctuations. ### **3. 9:00 AM (EST)** - **Trading sessions:** This time is within the London session and near the beginning of the New York session. - **Characteristics:** - Liquidity: Very high, as this is the period between the two largest sessions – London and New York. - Volatility: Extremely strong, especially for major currency pairs such as EUR/USD, GBP/USD, USD/JPY. - Trading opportunities: Suitable for both news trading and trend trading, as this is the time when a lot of economic data is released (usually from the US or the European region). - **Note:** High volatility can bring big profits, but also comes with high risks. ### **Summary of effects:** - **1 AM (EST):** Moderate volatility, focusing on Asian currency pairs. - **5 AM (EST):** Increased liquidity and volatility, suitable for breakout trading. - **9 AM (EST):** High volatility and high liquidity, the best time for Forex trading. ==> How to trade, when the high/low of CRT is swept, move to LTF to wait for confirmation to enter the order Only sell at high level and buy at discount price. Find CE at specific important time. Trading CRT with HTF direction has better win rate. The more inside bars, the higher the probability. Place a partial and Move breakeven at 50% range. Do a backtest and post your chart.
Pine Script® 인디케이터
Paulhdvn의
22
High Low Levels by JZCustom High Low Levels Indicator - features Clearly plotted high and low levels for specific trading sessions. This indicator provides visual representations of key price levels during various trading periods. Below are the main features and benefits of this indicator: 1. Display high and low levels for each session - previous day high/low: display the high and low from the previous day, giving you a better understanding of how the price moves compared to the prior day. - asia, london, and custom sessions: track the high and low levels for the major trading sessions (asian and london) and two custom user-defined sessions. 2. Complete line and label customization - custom line appearance: choose the color, line style (solid, dashed, dotted), and line thickness for each trading session. you can also decide if the lines should extend beyond the current price action. - custom labels: define your own label texts for each custom session. this way, you can label the levels precisely and easily track price movements. 3. Define your own trading sessions - add up to two custom sessions (custom and custom 2), which can be defined using precise start and end times (hour and minute). - each custom session allows you to specify the label text for the high and low levels, enabling you to easily differentiate different parts of the day on the chart. 4. Clear and intuitive design - grouped settings: all settings are grouped based on trading sessions, so you can easily customize every aspect of the visual representation. - simple toggle on/off: you can easily enable or disable each line (previous day, asia, london, custom 1, custom 2). this allows you to keep your chart clean and focus only on the important levels you need at any moment. 5. Flexible time zones - time zone settings: set the time zone (utc, europe/london, america/new_york, asia/tokyo) to properly align the timeframes for each level depending on the market you're focusing on. 6. Automatic cleanup of old lines and labels - old levels removal: automatically remove old lines and labels to prevent clutter on your chart. this ensures that only current, relevant levels for each trading day or session are displayed. 7. Precise plotting and line extension - accurate level markings: the indicator calculates the precise times when the high and low levels were reached and plots lines that visually represent these levels. - line extension options: you have the option to extend the high/low lines beyond their point of calculation, which helps with identifying price action trends beyond the current period. Dec 7, 2024 Release Notes Changes and Improvements for Users: 1. Customizable Offset for Lines and Labels: - A new input, `Line and Label Offset`, allows users to control how far the lines and their associated text labels extend. This ensures the labels and lines remain aligned and can be adjusted as needed. 2. Unified Offset Control: - The same offset value is applied to all types of lines and labels (e.g., Previous Day High/Low, Asia High/Low, London High/Low, and custom sessions). Users can change this in one place to affect the entire script consistently. 3. Enhanced Flexibility: - Users now have more control over the appearance and position of their lines and labels, making the indicator adaptable to different chart setups and personal preferences. These updates aim to enhance user convenience and customization, ensuring a more tailored charting experience.
Pine Script® 인디케이터
JanZhor의