지금 시작

Multitimeframe

Squeeze Momentum with Trend Exhaustion# Squeeze Momentum + Trend Exhaustion Indicator ## Complete User Manual --- ## Table of Contents 1. (#what-this-indicator-does) 2. (#visual-components) 3. (#market-states) 4. (#how-to-read-signals) 5. (#trading-examples) 6. (#configuration-guide) 7. (#best-practices) --- ## What This Indicator Does This indicator combines two powerful concepts to identify complete market cycles: ### 1. Squeeze Momentum (LazyBear) Detects **volatility compression** (consolidation) and subsequent **expansion** (breakout). **Think of it like:** A spring being compressed, then released. ### 2. Multi-Timeframe Trend Exhaustion Measures how far price has moved from its moving averages across multiple timeframes. **Think of it like:** A rubber band being stretched—eventually it must snap back. ### The Complete Cycle ``` Consolidation → Breakout → Trend → Exhaustion → Reversion → Consolidation ``` This indicator shows you exactly where you are in this cycle. --- ## Visual Components ### Main Panel (Bottom) | Element | What It Looks Like | Meaning | |---------|-------------------|---------| | **Colored Bars** | Green/Red histogram | Momentum strength and direction | | **Filled Area** | Yellow/Lime/Red gradient area | Price extension from moving averages | | **Cross at Zero** | Black/Gray/Blue cross | Squeeze state (volatility) | | **Dashed Lines** | Horizontal red/green lines | Extension thresholds (±2σ scaled) | --- ### 1. Momentum Histogram (Colored Bars) | Color | Direction | Meaning | |-------|-----------|---------| | **Bright Green** (Lime) | Up ↑ | Strong bullish momentum (increasing) | | **Dark Green** | Up ↑ | Weak bullish momentum (decreasing) | | **Bright Red** | Down ↓ | Strong bearish momentum (increasing) | | **Dark Red** (Maroon) | Down ↓ | Weak bearish momentum (decreasing) | **Key insight:** When bars change from bright to dark, momentum is fading. --- ### 2. Extension Area (Filled Gradient) Shows how extended price is from its moving averages across 5 timeframes (5m, 15m, 1h, 4h, Daily). | Color | Position | Meaning | |-------|----------|---------| | **Red** | High above zero | Severely overbought (>2σ scaled) | | **Orange/Yellow** | Above zero | Moderately overbought | | **Lime/Green** | Below zero | Moderately oversold | | **Teal** | Deep below zero | Severely oversold (<-2σ scaled) | **The area is scaled 3x** for better visibility. Actual values shown in table. **Reading it:** - **Area touching upper dashed line** = Price very far above averages (exhaustion territory) - **Area touching lower dashed line** = Price very far below averages (exhaustion territory) - **Area near zero** = Price near its averages (normal/neutral) --- ### 3. Squeeze Indicator (Cross at Zero Line) | Color | Status | Meaning | |-------|--------|---------| | **Black** ⚫ | Squeeze ON | Bollinger Bands inside Keltner Channels → Low volatility, consolidation | | **Gray** ⚪ | Squeeze OFF | Bollinger Bands outside Keltner Channels → Volatility expanding, breakout | | **Blue** 🔵 | No Squeeze | Normal volatility conditions | **Critical:** The transition from Black → Gray is where explosive moves begin. --- ### 4. Entry/Exit Signals | Symbol | Type | Meaning | |--------|------|---------| | 🔺 **Large Green Triangle** | HC Long Entry | High Confidence long setup (Squeeze OFF + Oversold + Confluence) | | 🔻 **Large Red Triangle** | HC Short Entry | High Confidence short setup (Squeeze OFF + Overbought + Confluence) | | 🔺 Small green | Medium Long | Long setup without full confluence | | 🔻 Small red | Medium Short | Short setup without full confluence | | ✕ Orange X | Exit Long | Close long positions (exhaustion detected) | | ✕ Teal X | Exit Short | Close short positions (exhaustion detected) | **Trade only the LARGE triangles** for highest probability setups. --- ## Market States The indicator identifies 7 distinct market states shown in the info table. ### State 1: 💤 CONSOLIDATION **Conditions:** - Squeeze: ON (black cross) - Extension: Near zero (±1σ) - Momentum: Contracting **What's happening:** Price is range-bound, volatility dying down. Spring is being compressed. **Action:** **WAIT.** Do not trade. Set alerts for Squeeze OFF. --- ### State 2: ⚡ BREAKOUT BULL / BEAR **Conditions:** - Squeeze: OFF (gray cross) ← **Key trigger** - Extension: Still moderate - Momentum: Strong directional move (bright green or red bars) **What's happening:** Volatility explosion. Spring released. This is the start of a new trend. **Action:** **ENTER** in direction of momentum. - ⚡ BREAKOUT BULL → Go LONG - ⚡ BREAKOUT BEAR → Go SHORT **Best scenario:** Breakout from oversold/overbought levels (confluence with exhaustion indicator). --- ### State 3: ↗️ TRENDING UP / ↘️ TRENDING DOWN **Conditions:** - Squeeze: OFF or No Squeeze - Extension: Growing (1σ to 2σ) - Momentum: Sustained strong bars **What's happening:** Trend in progress. Price moving away from averages. **Action:** **HOLD** positions. Let winners run. Don't fight the trend. --- ### State 4: ⚠️ EXTENDED UP / DOWN **Conditions:** - Extension: Above 2σ threshold - Momentum: Still strong (bright bars) - Confluence: May be weak **What's happening:** Price stretched but still has power. Caution zone. **Action:** **CAUTION.** Don't enter new positions. Tighten stops on existing positions. --- ### State 5: 🔴 EXHAUSTION BULL / 🟢 EXHAUSTION BEAR **Conditions:** - Extension: >2σ (touching dashed lines) - Momentum: Fading (bright bars turning dark) - Velocity: Decreasing - Confluence: 3/5 or better **What's happening:** Rubber band stretched to maximum. Trend running out of energy. **Action:** **EXIT** positions. - 🔴 EXHAUSTION BULL → Close LONGS, consider SHORT - 🟢 EXHAUSTION BEAR → Close SHORTS, consider LONG **This is the highest probability reversal signal.** --- ### State 6: ➡️ TRENDING (Neutral Direction) **Conditions:** - Price trending but without clear momentum direction changes **Action:** **HOLD** or wait for clearer signals. --- ### State 7: — NEUTRAL **Conditions:** - Extension near zero - No squeeze - Weak momentum **Action:** No trade. Wait for setup. --- ## How to Read Signals ### Perfect Long Entry (High Confidence ⭐) **Requirements (all must be true):** 1. ⚫→⚪ Squeeze just turned OFF (gray cross) 2. 📊 Momentum bars bright GREEN and rising 3. 🔻 Extension area BELOW lower dashed line (oversold) 4. ⭐ Confluence: 3/5 or more timeframes agree (shown as "🔻" in table) **Visual:** Large green triangle appears **What this means:** Price was oversold across multiple timeframes, consolidated, and is now breaking out upward with fresh momentum. **Entry:** Next candle after signal **Stop Loss:** Below recent consolidation low **Take Profit:** When extension area crosses back above zero, or when exit signal appears --- ### Perfect Short Entry (High Confidence ⭐) **Requirements (all must be true):** 1. ⚫→⚪ Squeeze just turned OFF (gray cross) 2. 📊 Momentum bars bright RED and falling 3. 🔺 Extension area ABOVE upper dashed line (overbought) 4. ⭐ Confluence: 3/5 or more timeframes agree (shown as "🔺" in table) **Visual:** Large red triangle appears **What this means:** Price was overbought across multiple timeframes, consolidated, and is now breaking down with fresh momentum. **Entry:** Next candle after signal **Stop Loss:** Above recent consolidation high **Take Profit:** When extension area crosses back below zero, or when exit signal appears --- ### Exit Signals #### Exit Long (Orange X) **Appears when:** - Extension area reaches upper dashed line (>2σ) - Momentum bars turning from bright green to dark green - Price losing upward velocity **Action:** Close 50-100% of position. Move stop to breakeven on remainder. #### Exit Short (Teal X) **Appears when:** - Extension area reaches lower dashed line (<-2σ) - Momentum bars turning from bright red to dark red - Price losing downward velocity **Action:** Close 50-100% of position. Move stop to breakeven on remainder. --- ### Medium Confidence Signals (Small Triangles) These appear when squeeze is OFF and momentum is directional, but: - Extension is only moderate (not extreme), OR - Confluence is weak (<3/5 timeframes) **How to trade:** - Use smaller position size (50% of normal) - Tighter stops - Only take if other factors align (support/resistance, volume, etc.) --- ## Trading Examples ### Example 1: Classic Squeeze Play into Trend ``` Step 1: CONSOLIDATION (💤) Chart: Price moving sideways for 10-20 candles Indicator: Black cross at zero (Squeeze ON) Extension: Yellow/Lime area near zero line Action: Set alert for Squeeze OFF Step 2: BREAKOUT (⚡) Chart: Strong green candle breaks resistance Indicator: Cross turns GRAY (Squeeze OFF) Bright GREEN momentum bars appear Extension area still near zero or slightly below Signal: Large green triangle appears Action: ENTER LONG Stop loss below consolidation Target: Extension upper line Step 3: TRENDING (↗️) Chart: Series of higher highs and higher lows Indicator: Momentum bars stay bright green Extension area rising toward upper line Area color transitions yellow → orange → red Action: HOLD, trailing stop Step 4: EXHAUSTION (🔴) Chart: Price makes new high but with smaller candle Indicator: Extension area touches upper dashed line Momentum bars turn DARK green (weakening) Orange X appears Table shows "EXHAUSTION BULL" Action: EXIT position Book profits Step 5: REVERSION Chart: Price falls back toward moving averages Indicator: Extension area shrinks back toward zero Red momentum bars appear Action: Wait for next setup ``` **Result:** Caught the entire trend from breakout to exhaustion. --- ### Example 2: Failed Breakout (What NOT to Trade) ``` Situation: - Squeeze OFF (gray cross) ✓ - Momentum bars bright green ✓ - BUT extension area ABOVE upper line (already overbought) ✗ - Confluence shows 1/5 (only one timeframe agrees) ✗ Indicator: Small green triangle (medium confidence) or no triangle What happens: Price makes small move up, then reverses Lesson: Don't chase extended moves even if squeeze fires. Wait for price to be on the RIGHT SIDE of the extension lines. ``` --- ### Example 3: Exhaustion Reversal Trade ``` Step 1: EXTENDED (⚠️) Chart: Strong uptrend for days Indicator: Extension area deep in red zone (>2σ) Momentum still bright green but starting to shorten Table: "EXTENDED UP" / "CAUTION LONG" Action: Watch closely, tighten stops Step 2: EXHAUSTION (🔴) Chart: Price makes final push but with decreasing volume Indicator: Momentum bars turn DARK green Orange X appears Table: "EXHAUSTION BULL" + "4/5 🔺" Action: CLOSE any longs Consider SHORT entry Step 3: SQUEEZE FORMS (Optional) Chart: Price starts consolidating Indicator: Cross turns BLACK (Squeeze ON) Extension area falling toward zero Action: Wait for Squeeze OFF to confirm reversal Step 4: BREAKOUT DOWN (⚡) Indicator: Cross turns GRAY Bright RED momentum bars Large red triangle appears Action: ENTER SHORT (reversal confirmed) ``` **Result:** Exited at the top, caught the reversal. --- ## Configuration Guide ### Recommended Settings by Timeframe #### For 4H Charts (Swing Trading) ``` Squeeze Settings: (defaults are fine) - BB Length: 20 - BB MultFactor: 2.0 - KC Length: 20 - KC MultFactor: 1.5 Exhaustion TFs: - TF1: 15m - TF2: 1h - TF3: 4h - TF4: 12h or Daily - TF5: Daily or Weekly Extension Threshold: 2.0σ Min Confluence: 3/5 ``` #### For 1H Charts (Day Trading) ``` Squeeze Settings: (defaults) Exhaustion TFs: - TF1: 5m - TF2: 15m - TF3: 1h - TF4: 4h - TF5: Daily Extension Threshold: 2.0σ Min Confluence: 3/5 ``` #### For 15m Charts (Scalping) ``` Squeeze Settings: - BB Length: 15 - KC Length: 15 Exhaustion TFs: - TF1: 1m - TF2: 5m - TF3: 15m - TF4: 1h - TF5: 4h Extension Threshold: 2.5σ (higher to avoid noise) Min Confluence: 4/5 (more strict) ``` --- ### Understanding the Table Located in top-right corner: | Row | Meaning | |-----|---------| | **Market State** | Current cycle phase (Consolidation/Breakout/Trending/Exhaustion) | | **Squeeze** | 🔴 ON / 🟢 OFF / 🔵 No | | **Momentum** | ↑ Bull / ↓ Bear / ~ Weak / — Neutral | | **Extension** | Actual value in standard deviations (σ) - NOT scaled | | **Confluence** | How many timeframes agree (X/5 🔺 or 🔻) | | **Velocity** | Speed of extension change (↑ increasing, ↓ decreasing) | | **ACTION** | What to do right now | **Most important rows:** 1. **Market State** - Quick glance at current cycle 2. **Confluence** - Determines signal quality 3. **ACTION** - Direct guidance --- ## Best Practices ### ✅ DO 1. **Wait for High Confidence signals** (large triangles) - Don't trade every small signal - Quality over quantity 2. **Use the complete cycle** - Enter on Breakout (⚡) - Hold through Trending (↗️/↘️) - Exit on Exhaustion (🔴/🟢) 3. **Respect confluence** - 4/5 or 5/5 = Excellent probability - 3/5 = Good probability - 1-2/5 = Skip 4. **Combine with price action** - Support/resistance levels - Volume confirmation - Candlestick patterns 5. **Set alerts** - "Squeeze OFF" - Don't miss breakouts - "HC Long Setup" / "HC Short Setup" - "Exit Long" / "Exit Short" 6. **Scale positions** - Enter 50% on signal - Add 25% if extension confirms - Add final 25% if momentum sustains 7. **Use proper risk management** - Stop loss: Below/above consolidation - Position size: 1-2% account risk - Take profit: Extension targets or signals --- ### ❌ DON'T 1. **Don't trade Consolidation state** - Black cross (Squeeze ON) = Wait mode - No signals during consolidation 2. **Don't chase Extended moves** - If extension already >2σ when Squeeze fires - Even if momentum looks good - Wait for reversion first 3. **Don't fight strong trends** - If extension is growing and momentum strong - Don't counter-trend trade - Wait for exhaustion signals 4. **Don't ignore velocity** - If velocity is ↑ and extension high = still dangerous - If velocity is ↓ and extension high = safer reversal 5. **Don't trade low confluence** - 1/5 or 2/5 = Different timeframes disagree - High chance of false signal 6. **Don't use blindly** - Check overall market context - Major news events can override signals - Trend on higher timeframe matters 7. **Don't overtrade** - Good setups are rare (that's why they work) - Wait for complete setup formation --- ## Quick Reference Card ### Signal Quality Checklist **⭐⭐⭐ PERFECT SETUP (Trade this)** - Squeeze just turned OFF (⚫→⚪) - Momentum bright and directional - Extension >2σ (OPPOSITE direction of entry) - Confluence ≥3/5 - Large triangle signal - Action says "LONG/SHORT ENTRY ⭐" **⭐⭐ GOOD SETUP (Trade with caution)** - Squeeze OFF - Momentum directional - Extension moderate - Confluence ≥3/5 - Small triangle or Action confirms **⭐ WEAK SETUP (Skip)** - Low confluence (<3/5) - Extension same direction as entry - Momentum weak or conflicting - Already in Extended/Exhaustion state --- ### State → Action Quick Guide | See This State | Do This | |---------------|---------| | 💤 CONSOLIDATION | Wait, set alerts | | ⚡ BREAKOUT | Enter in direction | | ↗️/↘️ TRENDING | Hold positions | | ⚠️ EXTENDED | Tighten stops, no new entries | | 🔴/🟢 EXHAUSTION | Exit, consider reversal | | — NEUTRAL | No trade | --- ## Troubleshooting **Q: Indicator shows Exhaustion but price keeps going** **A:** Check velocity and momentum. If still bright bars + velocity ↑, wait. True exhaustion needs momentum weakening. **Q: Too many false signals** **A:** Increase Min Confluence to 4/5. Use longer timeframe chart (4h instead of 1h). **Q: Missing good trades** **A:** Set alerts for "Squeeze OFF" and "HC Entry" signals. You can't watch charts 24/7. **Q: Extension area looks weird** **A:** Remember it's scaled 3x for visibility. Check table for actual values. **Q: Which timeframe is best?** **A:** 4H for swing trading, 1H for day trading. Lower = more signals but more noise. **Q: Can I use this with other indicators?** **A:** Yes! Combine with: - Volume profile - Support/resistance levels - Moving averages on chart - RSI for additional confirmation --- ## Final Thoughts This indicator gives you a complete picture of market structure: - **Where are we?** (Market State) - **Where are we going?** (Momentum) - **How far can it go?** (Extension) - **When will it reverse?** (Exhaustion) The key is **patience**. Wait for the complete setup: 1. Consolidation (⚫ Squeeze ON) 2. Breakout (⚪ Squeeze OFF) 3. Right extension direction (oversold for longs, overbought for shorts) 4. Strong confluence (3/5+) When all pieces align, you get high-probability trades with clear entries, targets, and exits. **Trade the cycle, not every wiggle.** --- ## Support & Updates For questions or suggestions, refer to the original script documentation or TradingView community. **Remember:** No indicator is perfect. Always use proper risk management and combine multiple forms of analysis. **Good trading! 📈**
Pine Script® 인디케이터
Marianodipietra의
Session Volume Analyzer [JOAT] Session Volume Analyzer — Global Trading Session and Volume Intelligence System This indicator addresses the analytical challenge of understanding market participation patterns across global trading sessions. It combines precise session detection with comprehensive volume analysis to provide insights into when and how different market participants are active. The tool recognizes that different trading sessions exhibit distinct characteristics in terms of participation, volatility, and volume patterns. Why This Combination Provides Unique Analytical Value Traditional session indicators typically only show time boundaries, while volume indicators show raw volume data without session context. This creates analytical gaps: 1. **Session Context Missing**: Volume spikes without session context provide incomplete information 2. **Participation Patterns Hidden**: Different sessions have different participant types (retail, institutional, algorithmic) 3. **Comparative Analysis Lacking**: No easy way to compare volume patterns across sessions 4. **Timing Intelligence Absent**: Understanding WHEN volume occurs is as important as HOW MUCH volume occurs This indicator's originality lies in creating an integrated session-volume analysis system that: **Provides Session-Aware Volume Analysis**: Volume data is contextualized within specific trading sessions **Enables Cross-Session Comparison**: Compare volume patterns between Asian, London, and New York sessions **Delivers Participation Intelligence**: Understand which sessions are showing above-normal participation **Offers Real-Time Session Tracking**: Know exactly which session is active and how current volume compares Technical Innovation and Originality While session detection and volume analysis exist separately, the innovation lies in: 1. **Integrated Session-Volume Architecture**: Simultaneous tracking of session boundaries and volume statistics creates comprehensive market participation analysis 2. **Multi-Session Volume Comparison System**: Real-time calculation and comparison of volume statistics across different global sessions 3. **Adaptive Volume Threshold Detection**: Automatic identification of above-average volume periods within session context 4. **Comprehensive Visual Integration**: Session backgrounds, volume highlights, and statistical dashboards provide complete market participation picture How Session Detection and Volume Analysis Work Together The integration creates a sophisticated market participation analysis system: **Session Detection Logic**: Uses Pine Script's time functions to identify active sessions // Session detection based on exchange time bool inAsian = not na(time(timeframe.period, asianSession)) bool inLondon = not na(time(timeframe.period, londonSession)) bool inNY = not na(time(timeframe.period, nySession)) // Session transition detection bool asianStart = inAsian and not inAsian bool londonStart = inLondon and not inLondon bool nyStart = inNY and not inNY **Volume Analysis Integration**: Volume statistics are calculated within session context // Session-specific volume accumulation if asianStart asianVol := 0.0 asianBars := 0 if inAsian asianVol += volume asianBars += 1 // Real-time session volume analysis float asianAvgVol = asianBars > 0 ? asianVol / asianBars : 0 **Relative Volume Assessment**: Current volume compared to session-specific averages float volMA = ta.sma(volume, volLength) float volRatio = volMA > 0 ? volume / volMA : 1 // Volume classification within session context bool isHighVol = volRatio >= 1.5 and volRatio < 2.5 bool isVeryHighVol = volRatio >= 2.5 This creates a system where volume analysis is always contextualized within the appropriate trading session, providing more meaningful insights than raw volume data alone. Comprehensive Session Analysis Framework **Default Session Definitions** (customizable based on broker timezone): - **Asian Session**: 1800-0300 (exchange time) - Represents Asian market participation including Tokyo, Hong Kong, Singapore - **London Session**: 0300-1200 (exchange time) - Represents European market participation - **New York Session**: 0800-1700 (exchange time) - Represents North American market participation **Session Overlap Analysis**: The system recognizes and highlights overlap periods: - **London/New York Overlap**: 0800-1200 - Typically the highest volume period - **Asian/London Overlap**: 0300-0300 (brief) - Transition period - **New York/Asian Overlap**: 1700-1800 (brief) - End of NY, start of Asian **Volume Intelligence Features**: 1. **Session-Specific Volume Accumulation**: Tracks total volume within each session 2. **Cross-Session Volume Comparison**: Compare current session volume to other sessions 3. **Relative Volume Detection**: Identify when current volume exceeds historical averages 4. **Participation Pattern Analysis**: Understand which sessions show consistent high/low participation Advanced Volume Analysis Methods **Relative Volume Calculation**: float volMA = ta.sma(volume, volLength) // Volume moving average float volRatio = volMA > 0 ? volume / volMA : 1 // Current vs average ratio // Multi-tier volume classification bool isNormalVol = volRatio < 1.5 bool isHighVol = volRatio >= 1.5 and volRatio < 2.5 bool isVeryHighVol = volRatio >= 2.5 bool isExtremeVol = volRatio >= 4.0 **Session Volume Tracking**: // Cumulative session volume with bar counting if londonStart londonVol := 0.0 londonBars := 0 if inLondon londonVol += volume londonBars += 1 // Average volume per bar calculation float londonAvgVol = londonBars > 0 ? londonVol / londonBars : 0 **Cross-Session Volume Comparison**: The system maintains running totals for each session, enabling real-time comparison of participation levels across different global markets. What the Display Shows Session Backgrounds — Colored backgrounds indicating which session is active - Pink: Asian session - Blue: London session - Green: New York session Session Open Lines — Horizontal lines at each session's opening price Session Markers — Labels (AS, LN, NY) when sessions begin Volume Highlights — Bar coloring when volume exceeds thresholds - Orange: High volume (1.5x+ average) - Red: Very high volume (2.5x+ average) Dashboard — Current session, cumulative volume, and averages Color Scheme Asian — #E91E63 (pink) London — #2196F3 (blue) New York — #4CAF50 (green) High Volume — #FF9800 (orange) Very High Volume — #F44336 (red) Inputs Session Times: Asian Session window (default: 1800-0300) London Session window (default: 0300-1200) New York Session window (default: 0800-1700) Volume Settings: Volume MA Length (default: 20) High Volume threshold (default: 1.5x) Very High Volume threshold (default: 2.5x) Visual Settings: Session colors (customizable) Show/hide backgrounds, lines, markers Background transparency How to Read the Display Background color shows which session is currently active Session open lines show where each session started Orange/red bars indicate above-average volume Dashboard shows cumulative volume for each session today Alerts Session opened (Asian, London, New York) High volume bar detected Very high volume bar detected Important Limitations and Realistic Expectations Session times are approximate and depend on your broker's server timezone—manual adjustment may be required for accuracy Volume data quality varies significantly by broker, instrument, and market type Cryptocurrency and some forex markets trade continuously, making traditional session boundaries less meaningful High volume indicates participation level only—it does not predict price direction or market outcomes Session participation patterns can change over time due to market structure evolution, holidays, and economic conditions This tool displays historical and current market participation data—it cannot predict future volume or price movements Volume spikes can occur for numerous reasons unrelated to directional price movement (news, algorithmic trading, etc.) Different instruments exhibit different session sensitivity and volume patterns Market holidays and special events can significantly alter normal session patterns Appropriate Use Cases This indicator is designed for: - Market participation pattern analysis - Session-based trading schedule planning - Volume context and comparison across sessions - Educational study of global market structure - Supplementary analysis for session-based strategies This indicator is NOT designed for: - Standalone trading signal generation - Volume-based price direction prediction - Automated trading system triggers - Guaranteed session pattern repetition - Replacement of fundamental or sentiment analysis Understanding Session Analysis Limitations Session analysis provides valuable context but has inherent limitations: - Session patterns can change due to economic conditions, holidays, and market structure evolution - Volume patterns may not repeat consistently across different market conditions - Global events can override normal session characteristics - Different asset classes respond differently to session boundaries - Technology and algorithmic trading continue to blur traditional session distinctions — Made with passion by officialjackofalltrades
Pine Script® 인디케이터
officialjackofalltrades의
BB Squeeze - HighQToolsBBW Squeeze — HighQTools As always, if anyone has any tips or additional features they'd like to see, feel free to reach out! Overview The BBW Percentile Squeeze highlights periods of exceptionally compressed volatility by measuring Bollinger Band Width (BBW) and ranking it within a rolling historical percentile. When BBW falls into the lowest portion of its own distribution, price is statistically “tight” relative to recent history—a condition that often precedes volatility expansion. Instead of plotting an oscillator in a separate pane, this tool expresses information directly on the price chart by changing bar colors during squeeze conditions, keeping charts clean and execution-focused. How It Works Standard Bollinger Bands are calculated using a configurable length and standard deviation. Band width is normalized and evaluated against a rolling lookback window. The current width is converted into a percentile rank (0–100): Lower percentile = tighter volatility Higher percentile = expanded volatility When the percentile drops below the user-defined threshold, the market is considered to be in a squeeze. An optional RTH-only mode allows the percentile calculation to consider Regular Trading Hours bars only, which is especially useful for futures traders who want to ignore overnight volatility distortions. Visual Signals Squeeze Bars Bars are recolored when BBW percentile falls below the selected threshold, indicating extreme compression. Release Bar (optional) The first bar exiting the squeeze can be highlighted separately, marking the resolution of compression. No oscillator, no bands, no shapes—only context applied directly to price. How to Use It The squeeze itself is not a trade signal. Squeeze conditions indicate stored energy—expect range expansion, not direction. Focus on: Market structure Higher-timeframe context Volume, delta, or acceptance/rejection The release from squeeze often provides the best opportunity, especially when aligned with directional bias or structural breaks. For best results, use this tool as a context filter alongside execution setups rather than as a standalone entry signal. Recommended Settings BB Length: 10 Std Dev: 2.0 Percentile Lookback: 200–300 bars Squeeze Threshold: 5-10 percentile RTH-only: Enabled for index futures Disclaimer This indicator is designed to provide context, not predictions. Always combine volatility information with sound risk management and a complete trading plan.
Pine Script® 인디케이터
HighQTools의
Elite MTF EMA ReclaimThis indicator is a trend-continuation tool, not a scalper. Its purpose is to help you enter clean pullback trades in strong trends while blocking chop and low-quality setups. It works by: Requiring Daily + 1H trend alignment Enforcing EMA structure (5/10/20/50) on the execution timeframe Confirming momentum expansion using EMA slope + curvature Blocking trades when conditions are choppy (low ATR, weak ADX, tight EMAs, recent EMA crosses) Triggering entries only after a Pullback → Reclaim → (optional) Retest How to use it: Trade on the 6-minute chart (Forex works best based on default setting) but is adaptable to any market by changing settings Wait for LONG / SHORT triangles only when no CHOP or HTF block is shown Enter on the signal, place stops beyond EMA 50 or structure, target 2R–4R+ Expect fewer but higher-quality trades What it’s not: Not a breakout or range-trading indicator Not meant to fire many signals Not for choppy or low-volatility markets Bottom line: It helps you trade with higher-timeframe momentum, enter after pullbacks, and avoid bad market conditions.
Pine Script® 인디케이터
sledgeproduuctions의
Swing Trade System# Swing Trade Strategy - Complete Guide ## Overview This is a comprehensive swing trading indicator for TradingView that identifies high-probability trend continuation setups using multi-timeframe analysis, pullback patterns, and momentum confirmation. The strategy combines technical indicators with risk management tools to help traders capture swing moves with defined risk-reward parameters. ## What It Does The indicator identifies two types of signals: 1. **Base Signals** (small markers) - Initial setup detection with basic criteria met 2. **High Confidence (HC) Signals** (large markers) - Fully confirmed setups with all filters passed, including optional higher timeframe confirmation Once a HC signal triggers, the indicator automatically plots: - Dynamic stop loss levels (trailing, break-even, or static) - Partial take profit (TP1) at 1R - Final take profit (TP2) at your chosen risk-reward multiple - Real-time R-multiple tracking - Confluence dashboard showing all conditions ## How It Works ### Core Signal Logic The strategy identifies pullback-to-trend entries using this sequence: **For LONG signals:** 1. **Trend Filter**: Fast EMA (20) above Slow EMA (50) = uptrend confirmed 2. **Pullback**: Previous candle closed between the two EMAs (pulled back but didn't break structure) 3. **RSI Swing Zone**: RSI between 40-60 (not overbought/oversold, just resting) 4. **Reclaim**: Current candle crosses back above Fast EMA (momentum returning) 5. **Volume Spike** (optional): Current volume > 1.5x the 20-period average 6. **HTF Confirmation** (optional): Daily timeframe shows: price > 50 EMA, RSI > 50, and rising momentum **For SHORT signals:** The same logic applies in reverse (downtrend, pullback above fast EMA, reclaim below, etc.) ### Risk Management Features **Stop Loss Placement:** - Initial stop: Swing low/high over the last 10 bars - Can upgrade to ATR trailing stop (2x ATR below/above price) - Can move to break-even after reaching 1R profit **Take Profit Levels:** - TP1: 1R (optional partial exit point) - TP2: 2R default (adjustable to your preference) **Position Monitoring:** - Live R-multiple display shows current profit/loss in risk units - Dynamic stop updates visually on chart - Color-coded confidence score (0-100%) based on confluence of factors ## Best Way to Use These Signals ### 1. **Wait for High Confidence Signals Only** - Don't trade every base signal (small markers) - Only take trades when you see the large "HC L" or "HC S" markers - These have passed all your filters including higher timeframe alignment ### 2. **Ideal Entry Timing** **On the Signal Candle:** - Enter at market close when HC signal fires - This ensures all conditions were met by candle close - Your stop and targets are calculated from this close price **On the Next Candle (more conservative):** - Wait for the candle after the signal - Enter if price continues in the signal direction - Helps avoid false breakouts but may miss some moves ### 3. **Position Sizing** Use the automatic risk calculation: - Your risk = Entry price - Stop loss - Position size = (Account Risk %) ÷ (Entry - Stop) - Example: Risk $100 on account, Entry $50, Stop $48 = $100 ÷ $2 = 50 shares ### 4. **Trade Management** **Scaling Out:** - Exit 50% position at TP1 (1R) to lock profits - Move stop to break-even on remaining position - Let rest run to TP2 (2R) or trail with ATR stop **Manual Override:** - If price action deteriorates (breaks below both EMAs, RSI divergence), consider early exit - The dynamic stop is a guide, not gospel—trust price action ## Breakout vs. Retest Strategy ### Understanding Breakout Types **1. First Touch Breakout (Aggressive)** - HC signal fires on first touch of fast EMA after pullback - Higher win rate if volume is strong - Best in strongly trending markets - Risk: Could be a false breakout if momentum weak **2. Retest Entry (Conservative)** - Wait for price to pull back *again* after initial HC signal - Enter when price retests the fast EMA a second time - Look for: lower volume on retest, RSI still in swing zone, fast EMA still above slow EMA - Lower risk but may miss some fast moves ### Which Breakouts to Take **Take the FIRST breakout (signal candle) when:** - ✅ Higher timeframe is strongly aligned (HTF confirmation on) - ✅ Volume spike is present (>1.5x average) - ✅ Confidence score ≥70% - ✅ Trend is fresh (EMAs recently crossed, not extended) - ✅ Price closed strongly above/below fast EMA (not barely crossed) - ✅ No major resistance/support nearby **Wait for a RETEST when:** - ⚠️ No volume confirmation on first signal - ⚠️ Confidence score 40-69% (moderate) - ⚠️ Price barely crossed the fast EMA (weak momentum) - ⚠️ Trend is extended (price far from slow EMA) - ⚠️ Major resistance/support level just ahead - ⚠️ Late in the trading day/week (could see pullback) ### How to Trade Retests **Setup:** 1. HC signal fires but you decide to wait 2. Price pulls back toward fast EMA over next 1-3 candles 3. Watch for second bounce at the fast EMA **Confirmation for Retest Entry:** - Price holds above fast EMA (for longs) without closing below it - Volume decreases on the pullback (profit-taking, not reversal) - RSI stays above 50 for longs (or below 50 for shorts) - Bullish candlestick pattern forms (hammer, engulfing, etc.) - Slow EMA is still providing support/resistance **Retest Entry Trigger:** - Enter when price crosses back in signal direction with momentum - Or enter with a limit order at the fast EMA - Use same stop loss as original signal (swing low/high) - Targets remain the same (measured from your new entry) ## Dashboard Reference The top confluence table shows real-time status: - **Trend**: Current trend direction based on EMAs - **HTF**: Higher timeframe alignment (if enabled) - **RSI Zone**: Whether RSI is in the 40-60 swing zone - **Volume**: Volume spike present or not - **Signal**: Current signal status (HC LONG/SHORT or None) - **R Risk**: Current profit/loss in R-multiples - **Stop**: Current stop loss price - **TP1/TP2**: Status of take profit levels - **Conf %**: Overall confidence score (70%+ = high probability) ## Alert Setup The indicator includes 8 alert types: 1. **HC LONG/SHORT ENTRY** - Main trade signals 2. **LONG/SHORT TP1 Reached** - Partial profit alerts 3. **LONG/SHORT Final TP Reached** - Full target hit 4. **LONG/SHORT Stop Hit** - Exit alerts Set up alerts in TradingView: - Click "Create Alert" on the indicator - Choose the specific alert condition - Set to "Once Per Bar Close" to avoid false alerts - Configure notification method (app, email, webhook, etc.) ## Recommended Settings **For Stock Swing Trading (4H-Daily):** - Fast EMA: 20 | Slow EMA: 50 - Swing Lookback: 10 - RSI Zone: 40-60 - HTF: Daily (if trading 4H charts) - Risk-Reward: 2R minimum **For Crypto (faster moves):** - Fast EMA: 12 | Slow EMA: 26 - Swing Lookback: 7 - RSI Zone: 35-65 - Volume Spike: ON - Risk-Reward: 1.5-2R **For Conservative Trading:** - Enable HTF Confirmation - Enable Volume Spike requirement - Use Break-even stop (move after 1R) - Only trade when Confidence ≥70% - Wait for retests on marginal setups ## Risk Warning This indicator is a tool, not a guarantee. Always: - Use proper position sizing (risk 1-2% per trade) - Respect the stop losses - Consider market context (news, earnings, major levels) - Backtest on your instruments before live trading - Never override risk management for FOMO The best signals combine technical confluence with good market conditions and disciplined execution.
Pine Script® 인디케이터
frankieho_92의
Dual-Timeframe ABR DashboardDual-Timeframe ABR Dashboard 是一款专为日内交易者设计的波动率参考工具，用于同时评估当前周期与日线级别的平均K线波幅（ABR）。 该指标基于 Average Bar Range（高低差的简单平均），帮助交易者快速判断： 单根K线的“正常”波动范围 当前价格相对于 ABR 的百分比位置 当日是否已接近日线级别的常规波动极限 指标不会在图表上绘制干扰性线条，而是通过状态栏与固定表格实时展示最新 ABR 数值，适合用于： 目标利润（TP）与止盈管理 趋势是否具备延续空间的判断 避免在“已走完波幅”的位置追价入场 这是一个为实盘决策服务，而非视觉美观的专业级日内交易辅助指标。 ====================================================================== Dual-Timeframe ABR Dashboard is a volatility reference tool designed specifically for day traders, providing a clear view of Average Bar Range (ABR) on both the current timeframe and the daily timeframe. By measuring the simple average of each bar’s high–low range, this indicator helps traders quickly assess: What constitutes a “normal” bar movement on the active timeframe Current price movement expressed as a percentage of ABR Whether the session has already consumed most of its typical daily range Instead of plotting lines on the chart, the indicator presents real-time ABR values via the status line and a fixed dashboard table, keeping the chart clean and execution-focused. This tool is particularly useful for: Profit target and trade management Evaluating remaining trend potential during the session Avoiding late entries after the daily range is largely exhausted Built for practical intraday decision-making, not visual clutter.
Pine Script® 인디케이터
sudongpojiaozi의
ADVANCED NIFTY OPTION BUY SELLADVANCED NIFTY OPTION BUY SELL – V1 is a non-repainting, trend-following TradingView indicator specially designed for NIFTY Index Options (CE / PE) traders. This indicator focuses on: Eliminating over-trading Providing high-quality, low-frequency signals Avoiding trades during sideways markets It combines EMA crossover, RSI momentum, and ADX trend strength to deliver clean and reliable buy/sell signals.
Pine Script® 인디케이터
vinaychaudhary_inbox의
ATR Based SL & TP Targets from Entry (Long/Short)ATR-based target helper for manual trade planning. Plots a single entry level plus ATR-based stop loss and take-profit targets on the price scale. The script uses a standard ATR (default 14) and lets you select the position side (Long or Short). For Long positions, it places the stop loss 1× ATR below the entry and take-profit levels at 1, 2, 3, and 4× ATR above. For Short positions, it mirrors this logic, placing the stop 1× ATR above the entry and targets 1–4× ATR below. You can adjust the entry price and ATR multipliers from the settings, and all levels update instantly, giving a clean visual of your risk and reward targets on the price scale. ------------------- Tip: After entry, and after I set my SL & TP levels, I hide the indicator until it's needed again. ​
Pine Script® 인디케이터
ThomasPg의
Pivot Point Zones [JOAT]Pivot Point Zones — Multi-Formula Pivot Levels with ATR Zones Pivot Point Zones calculates and displays traditional pivot points with five formula options, enhanced with ATR-based zones around each level. This creates more practical trading zones that account for price noise around key levels—because price rarely reacts at exact mathematical levels. What Makes This Indicator Unique Unlike basic pivot point indicators, Pivot Point Zones: Offers five different pivot calculation formulas in one indicator Creates ATR-based zones around each level for realistic reaction areas Pulls data from higher timeframes automatically Displays clean labels with exact price values Provides a comprehensive dashboard with all levels What This Indicator Does Calculates pivot points using Standard, Fibonacci, Camarilla, Woodie, and more formulas Draws horizontal lines at Pivot, R1-R3, and S1-S3 levels Creates ATR-based zones around each level for realistic price reaction areas Displays labels with exact price values Updates automatically based on higher timeframe closes Provides fills between zone boundaries for visual clarity Pivot Formulas Explained // Standard Pivot - Classic (H+L+C)/3 calculation pp := (pivotHigh + pivotLow + pivotClose) / 3 r1 := 2 * pp - pivotLow s1 := 2 * pp - pivotHigh r2 := pp + pivotRange s2 := pp - pivotRange // Fibonacci Pivot - Uses Fib ratios for level spacing r1 := pp + 0.382 * pivotRange r2 := pp + 0.618 * pivotRange r3 := pp + 1.0 * pivotRange // Camarilla Pivot - Tighter levels for intraday r1 := pivotClose + pivotRange * 1.1 / 12 r2 := pivotClose + pivotRange * 1.1 / 6 r3 := pivotClose + pivotRange * 1.1 / 4 // Woodie Pivot - Weights current close more heavily pp := (pivotHigh + pivotLow + 2 * close) / 4 // TD Pivot - Conditional based on open/close relationship x = pivotClose < pivotOpen ? pivotHigh + 2*pivotLow + pivotClose : pivotClose > pivotOpen ? 2*pivotHigh + pivotLow + pivotClose : pivotHigh + pivotLow + 2*pivotClose pp := x / 4 Formula Characteristics Standard — Classic pivot calculation. Balanced levels, good for swing trading. Fibonacci — Uses 0.382, 0.618, and 1.0 ratios. Popular with Fibonacci traders. Camarilla — Tighter levels derived from range. Excellent for intraday mean-reversion. Woodie — Weights current close more heavily. More responsive to recent price action. TD — Conditional calculation based on open/close relationship. Adapts to bar type. Zone System Each pivot level includes an ATR-based zone that provides a more realistic area for potential price reactions: // ATR-based zone width calculation float atr = ta.atr(atrLength) float zoneHalf = atr * zoneWidth / 2 // Zone boundaries around each level zoneUpper = level + zoneHalf zoneLower = level - zoneHalf This accounts for market noise and helps avoid false breakout signals at exact level prices. Visual Features Pivot Lines — Horizontal lines at each calculated level Zone Fills — Transparent fills between zone boundaries Level Labels — Labels showing level name and exact price (e.g., "PP 45123.50") Color Coding : - Yellow: Pivot Point (PP) - Red gradient: Resistance levels (R1, R2, R3) - darker = further from PP - Green gradient: Support levels (S1, S2, S3) - darker = further from PP Color Scheme Pivot Color — Default: #FFEB3B (yellow) — Central pivot point Resistance Color — Default: #FF5252 (red) — R1, R2, R3 levels Support Color — Default: #4CAF50 (green) — S1, S2, S3 levels Zone Transparency — 85-90% transparent fills around levels Dashboard Information The on-chart table (bottom-right corner) displays: Selected pivot type (Standard, Fibonacci, etc.) R3, R2, R1 resistance levels with exact prices PP (Pivot Point) highlighted S1, S2, S3 support levels with exact prices Inputs Overview Pivot Settings: Pivot Type — Formula selection (Standard, Fibonacci, Camarilla, Woodie, TD) Pivot Timeframe — Higher timeframe for OHLC data (default: D = Daily) ATR Length — Period for zone width calculation (default: 14) Zone Width — ATR multiplier for zone size (default: 0.5) Level Display: Show Pivot (P) — Toggle central pivot line Show R1/S1 — Toggle first resistance/support levels Show R2/S2 — Toggle second resistance/support levels Show R3/S3 — Toggle third resistance/support levels Show Zones — Toggle ATR-based zone fills Show Labels — Toggle price labels at each level Visual Settings: Pivot/Resistance/Support Colors — Customizable color scheme Line Width — Thickness of level lines (default: 2) Extend Lines Right — Project lines forward on chart Show Dashboard — Toggle the information table How to Use It For Intraday Trading: Use Daily pivots on intraday charts (15m, 1H) Pivot point often acts as the day's "fair value" reference Camarilla levels work well for intraday mean-reversion R1/S1 are the most commonly tested levels For Swing Trading: Use Weekly pivots on daily charts Standard or Fibonacci formulas work well R2/S2 and R3/S3 become more relevant Zone boundaries provide realistic entry/exit areas For Support/Resistance: R levels above price act as resistance targets S levels below price act as support targets Zone boundaries are more realistic than exact lines Multiple formula confluence adds significance Alerts Available DPZ Cross Above Pivot — Price crosses above central pivot DPZ Cross Below Pivot — Price crosses below central pivot DPZ Cross Above R1/R2 — Price breaks resistance levels DPZ Cross Below S1/S2 — Price breaks support levels Best Practices Match pivot timeframe to your trading style (Daily for intraday, Weekly for swing) Use zones instead of exact levels for more realistic expectations Camarilla is best for mean-reversion; Standard/Fibonacci for breakouts Combine with other indicators for confirmation — Made with passion by officialjackofalltrades
Pine Script® 인디케이터
officialjackofalltrades의
Big Trades / Intrabar Volume Clusters by HKDescription: This indicator brings professional Order Flow and Footprint capabilities to your chart. It detects and visualizes high-volume trade clusters inside the candle, allowing you to see exactly at which price level big market participants were active. Unlike standard volume bars, this tool uses Intrabar Data to map significant buying and selling pressure precisely within the candle body. ℹ️ IMPORTANT: Resolution Setting (Read First) To ensure this indicator works immediately for all users (including Free/Basic accounts), the default resolution is set to "1 Minute". Basic/Free Users: Please keep the setting at "1" (Second-based intervals often require a paid plan). Premium Users: For the best precision and the exact look shown in the screenshots, we highly recommend changing the Resolution setting to "5S" (5 Seconds)! 🚀 Key Features Intrabar Precision: Leverages request.security_lower_tf to look inside the candle structure. Noise Filtering: Only displays clusters that exceed your defined Minimum Volume threshold, filtering out retail noise. Smart Coloring: Green: Buying pressure (Close >= Open on the lower timeframe). Red: Selling pressure (Close < Open on the lower timeframe). 🆕 Independent Sizing: A unique feature: You can control the Font Size and Circle Size independently. This allows for small, non-intrusive circles with large, readable text. ⚙️ Settings Resolution: Default is 1 (Minute). Premium users should switch to 5S for true order flow precision. Minimum Volume: The most important filter. Determines how large a trade cluster must be to appear (e.g., 150+ for ETH, higher for BTC). Visuals: Customize Buy/Sell colors, Circle Size, and Text Size separately. ⚠️ Visual Tip (If text is hidden) If the bubbles or numbers appear behind the candles or disappear when clicking away: Right-click on any of the indicator bubbles. Select Visual Order -> Bring to Front. This ensures the Big Trades data always floats on top of your price bars.
Pine Script® 인디케이터
colacorn의
6
tncylyv - Improved Delta Volume BubbleThis script is a specialized modification and structural upgrade of the excellent "Delta Volume Bubble " by tncylyv. While the original tool provided a fantastic foundation for statistical volume analysis, this "Zero Float" Edition was built to solve specific visual challenges faced by active traders—specifically the issue of indicators "floating" or disconnecting from price when zooming in on lower timeframes. The Straight Improvements This version turns a "Signal Indicator" into a complete "Trading System" with five specific upgrades: 1. Visual Stability (The "Zero Float" Fix) Original: Used complex coordinates that could desynchronize, causing bubbles to drift or float away from candles on fast charts (1m/5m). My Upgrade: Implemented "Magnetic Anchoring." Labels and bubbles are now physically locked to the candle wicks. They never drift, overlap, or float, no matter how much you zoom or resize the chart. 2. Cognitive Load (The HUD) Original: Displayed raw numbers inside colored circles, requiring you to memorize color codes. My Upgrade: Replaced numbers with Semantic Text Labels (e.g., "ABSORB", "SQUEEZE", "MOMENTUM"). You can read the market intent instantly without decoding it. 3. Regime Adaptation (AI Engine) Original: Used a fixed threshold (e.g., Z-Score > 2.0). My Upgrade: Added an Adaptive Learning Window. The script scans recent volatility to automatically raise the threshold during choppy markets (filtering noise) and lower it during quiet sessions (catching subtle entries). 4. Market Memory (Smart Structure) Original: Signals disappeared into history. My Upgrade: Draws Support/Resistance Rails extending from major volume events. This helps you visualize exactly where institutions are defending their positions. 5. Robust Data Handling My Upgrade: Added a Hybrid Fallback Engine. If granular 1-minute data isn't available (e.g., on historical charts), the script seamlessly switches to an estimation model so the indicator never "breaks" or disappears. Core Logic Z-Score Normalization: We don't look at raw volume; we look at statistical anomalies (Standard Deviations). Absorption: Detects "Effort vs. Result"—high volume with tiny price movement (Trapped Traders). Squeeze: Highlights areas where a breakout is imminent due to volatility compression. Credits Original Concept & Code: tncylyv (Delta Volume Bubble ). This script would not exist without his brilliant groundwork. Modifications: Visual Anchoring, HUD Text System, AI Thresholding, and Structure Rails added in this edition. This script is open-source to keep the spirit of the original author alive. Use it to understand the "Why" behind the move.
Pine Script® 인디케이터
CustomQuantLabs의
1
Market Acceptance Zones [Interakktive]Market Acceptance Zones (MAZ) identifies statistical price acceptance — areas where the market reaches agreement and price rotates rather than trends. Unlike traditional support/resistance tools, MAZ does not assume where price "should" react. Instead, it highlights regions where multiple internal conditions confirm balance: directional efficiency drops, effort approximately equals result, volatility contracts, and participation remains stable. This is a market-state diagnostic tool, not a signal generator. █ WHAT THE ZONES REPRESENT MAZ (ATF) — Chart Timeframe Acceptance A MAZ marks an area where price displayed rotational behaviour and the auction temporarily agreed on value. These zones often act as compression regions, fair-price areas, or boundaries of consolidation where impulsive follow-through is less likely. Use ATF MAZs to: - Identify rotational environments - Avoid chasing price inside balance - Frame consolidation prior to expansion MAZ • HTF / MAZ • 2/3 — Multi-Timeframe Acceptance (AMTF) When Multi-Timeframe mode is enabled, MAZ evaluates acceptance on: - The chart timeframe - Two higher structural timeframes If the minimum consensus threshold is met (default: 2 of 3), the zone is classified as AMTF. These zones represent stronger agreement and typically decay more slowly than single-timeframe acceptance. AMTF zones are structurally stronger and are useful for: - Higher-quality rotation areas - Pullback framing within trends - Context alignment across timeframes H • MAZ — Historic Acceptance Zones Historic MAZs represent older acceptance that has transitioned out of active relevance. These zones are hidden by default and can be enabled to provide long-term memory context. █ AUTO MULTI-TIMEFRAME LOGIC When MTF Mode is set to Auto, MAZ uses a deterministic structural mapping based on the current chart timeframe: - 5m → 15m + 1H - 15m → 1H + 4H - 1H → 4H + 1D - 4H → 1D + 1W - 1D → 1W + 1M This ensures consistent higher-timeframe context without manual configuration. Advanced users may switch to Manual mode to define custom timeframes. █ ZONE LIFECYCLE MAZ zones are dynamic and maintain an internal lifecycle: - Active — Acceptance remains relevant - Aging — Acceptance quality is degrading - Historic — Retained only for memory context Zones track price interaction and re-acceptance, which can stabilise or strengthen them. Weak or stale zones are automatically removed to keep the chart clean. █ HOW TRADERS USE MAZ MAZ is designed to provide structure, not entries. Common applications include: - Avoiding chop when price is inside acceptance - Framing expansion after clean breaks from MAZ - Identifying higher-quality rotational pullbacks (AMTF zones) - Defining objective invalidation using zone boundaries █ SETTINGS OVERVIEW Market Acceptance Zones — Core - Acceptance Lookback - ATR Length - Zone Frequency (Conservative / Balanced / Aggressive) Market Acceptance Zones — Zones - Maximum Zones - Fade & Stale Bars - Historic Zone Visibility (default OFF) Market Acceptance Zones — Timeframes - MTF Mode (Off / Auto / Manual) - Manual Higher Timeframes - Minimum Consensus Requirement Market Acceptance Zones — Visuals - Neon / Muted Theme - Zone Labels & Consensus Detail - Optional Midline Display █ DISCLAIMER This indicator is a market context and diagnostic tool only. It does not generate trade signals, entries, or exits. Past acceptance behaviour does not guarantee future price action. Always combine with independent analysis and proper risk management.
Pine Script® 인디케이터
Interakktive의
1
Price Prediction Forecast ModelPrice Prediction Forecast Model This indicator projects future price ranges based on recent market volatility. It does not predict exact prices — instead, it shows where price is statistically likely to move over the next X bars. How It Works Price moves up and down by different amounts each bar. This indicator measures how large those moves have been recently (volatility) using the standard deviation of log returns. That volatility is then: Projected forward in time Scaled as time increases (uncertainty grows) Converted into future price ranges The further into the future you project, the wider the expected range becomes. Volatility Bands (Standard Deviation–Based) The indicator plots up to three projected volatility bands using standard deviation multipliers: SD1 (1.0×) → Typical expected price movement SD2 (1.25×) → Elevated volatility range SD3 (1.5×) → High-volatility / stress range These bands are based on standard deviation of volatility, not fixed probability guarantees. Optional Drift An optional drift term can be enabled to introduce a long-term directional bias (up or down). This is useful for markets with persistent trends.
Pine Script® 인디케이터
followmytradingjournal의
Trinity Multi-Timeframe CCITrinity Multi-Timeframe CCI Indicator This Pine Script indicator is a powerful **multi-timeframe Commodity Channel Index (MTF CCI)** tool that displays three CCI lines on a single pane: - **Current timeframe** (whatever chart you're viewing, e.g., 1h, 15m, etc.) - **4-hour timeframe** - **Daily timeframe** All three use the same CCI length (default 20, adjustable) and are fully customizable—you can enable/disable each line, change its timeframe, color, and thickness. Horizontal levels at 0 (dashed white by default), +100 (red), and -100 (green) are also included and fully editable. ### Core Functionality & Visual Signals The standout feature is the **dynamic coloring of the current timeframe CCI line**: - **Green**: Strong **bullish alignment**. This occurs when **all three CCIs are above the zero line** AND the current timeframe CCI is the **highest** of the three (leading the move upward with higher-timeframe confirmation). - **Red**: Strong **bearish alignment**. This occurs when **all three CCIs are below the zero line** AND the current timeframe CCI is the **lowest** of the three (leading the move downward with higher-timeframe confirmation). - **Yellow**: Neutral or no clear alignment (default state when the above conditions aren't met). An optional light background shading (green or red) highlights when the indicator is in a bullish or bearish state. Small triangle markers appear on the pane when a new bullish or bearish alignment forms, and built-in alerts notify you of new signals or when a signal ends. These are editable to enable or disable. ### How Traders Can Use It This indicator helps identify **high-probability trend continuations or reversals** by combining momentum (CCI) across multiple timeframes with alignment confirmation: - **Trend-following entries**: A green current line (especially with a fresh alert) suggests strong upward momentum backed by higher timeframes—ideal for long entries or adding to positions in an uptrend. - **Bearish entries/short setups**: A red current line signals strong downward momentum confirmed across timeframes—good for short entries or exiting longs. - **Confluence filter**: Use it as a filter for other strategies. Only take trades in the direction of the alignment (e.g., only long if current line is green). - **Early warning of weakness**: When the current line turns yellow after being green/red, it often signals the trend is losing multi-timeframe support—useful for tightening stops or taking partial profits. In essence, it visually answers the question: “Is the short-term momentum not only strong, but also aligned with and leading the medium- and long-term momentum?” When the answer is yes (green or red), it highlights moments of **multi-timeframe confluence**—some of the most reliable setups in technical trading. The alerts make it practical for active traders: you get notified the moment a strong aligned signal appears, without needing to watch the chart constantly. It's clean, highly customizable, and focuses on one clear concept—**multi-timeframe CCI leadership**—making it excellent for trend, swing, and even intraday traders looking for higher-timeframe confirmation.
Pine Script® 인디케이터
EMA34TRADER의
Account GuardianAccount Guardian: Dynamic Risk/Reward Overlay Introduction Account Guardian is an open-source indicator for TradingView designed to help traders evaluate trade setups before entering positions. It automatically calculates Risk-to-Reward ratios based on market structure, displays visual Stop Loss and Take Profit zones, and provides real-time position sizing recommendations. The indicator addresses a fundamental question every trader should ask before entering a trade: "Does this setup make mathematical sense?" Account Guardian answers this question visually and numerically, helping traders avoid impulsive entries with poor risk profiles. Core Functionality Account Guardian performs four primary functions: Detects swing highs and swing lows to identify logical stop loss placement levels Calculates Risk-to-Reward ratios for both long and short setups in real-time Displays visual SL/TP zones on the chart for immediate trade planning Computes position sizing based on your account size and risk tolerance The goal is to provide traders with instant feedback on whether a potential trade meets their minimum risk/reward criteria before committing capital. How It Works Swing Detection The indicator uses pivot point detection to identify recent swing highs and swing lows on the chart. These swing points serve as logical areas for stop loss placement: For Long Trades: The most recent swing low becomes the stop loss level. Price breaking below this level would invalidate the bullish thesis. For Short Trades: The most recent swing high becomes the stop loss level. Price breaking above this level would invalidate the bearish thesis. The swing detection lookback period is configurable, allowing you to adjust sensitivity based on your trading timeframe and style. It automatically adjusts the tp and sl when it is applied to your chart so it is always moving up and down! Risk/Reward Calculation Once swing levels are identified, the indicator calculates: Entry Price: Current close price (where you would enter) Stop Loss: Recent swing low (for longs) or swing high (for shorts) Risk: Distance from entry to stop loss Take Profit: Entry plus (Risk × Target Multiplier) R:R Ratio: Reward divided by Risk The R:R ratio is then evaluated against your configured thresholds to determine if the setup is valid, marginal, or poor. Visual Elements SL/TP Zones When enabled, the indicator draws colored boxes on the chart showing: Red Zone: Stop Loss area - the region between your entry and stop loss Green/Gold/Red Zone: Take Profit area - colored based on R:R quality The color coding provides instant visual feedback: Green: R:R meets or exceeds your "Good R:R" threshold (default 3:1) Gold: R:R meets minimum threshold but below "Good" (between 2:1 and 3:1) Red: R:R below minimum threshold - setup should be avoided Swing Point Markers Small circles mark detected swing points on the chart: Green circles: Swing lows (potential support / long SL levels) Red circles: Swing highs (potential resistance / short SL levels) Dashboard Panel The dashboard in the top-right corner displays comprehensive trade planning information: R:R Row: Current Risk-to-Reward ratio for long and short setups Status Row: VALID, OK, BAD, or N/A based on R:R thresholds Stop Loss Row: Exact price level for stop loss placement Take Profit Row: Exact price level for take profit placement Pos Size Row: Recommended position size based on your risk parameters Risk $ Row: Dollar amount at risk per trade Position Sizing Logic The indicator calculates position size using the formula: Position Size = Risk Amount / Risk per Unit Where: Risk Amount = Account Size × (Risk Percentage / 100) Risk per Unit = Entry Price - Stop Loss Price For example, with a $10,000 account risking 1% per trade ($100), if your entry is at 100 and stop loss at 98 (risk of 2 per unit), your position size would be 50 units. Input Parameters Swing Detection: Swing Lookback: Number of bars to look back for pivot detection (default: 10). Higher values find more significant swing points but may be slower to update. Target Multiplier: Multiplier applied to risk to calculate take profit distance (default: 2). A value of 2 means TP is 2× the distance of SL from entry. Risk/Reward Thresholds: Minimum R:R: Minimum acceptable Risk-to-Reward ratio (default: 2.0). Setups below this show as "BAD" in red. Good R:R: Threshold for excellent setups (default: 3.0). Setups at or above this show as "VALID" in green. Account Settings: Account Size ($): Your trading account size in dollars (default: 10,000). Used for position sizing calculations. Risk Per Trade (%): Percentage of account to risk per trade (default: 1.0%). Professional traders typically risk 0.5-2% per trade. Display: Show SL/TP Zones: Toggle visibility of the colored zone boxes on chart (default: enabled) Show Dashboard: Toggle visibility of the information panel (default: enabled) Analyze Direction: Choose to analyze Long only, Short only, or Both directions (default: Both) How to Use This Indicator Basic Workflow: Add the indicator to your chart Configure your account size and risk percentage in the settings Set your minimum and good R:R thresholds based on your trading rules Look at the dashboard to see current R:R for potential long and short entries Only consider trades where the status shows "VALID" or at minimum "OK" Use the displayed SL and TP levels for your order placement Use the position size recommendation to determine lot/contract size Interpreting the Dashboard: VALID (Green): Excellent setup - R:R meets your "Good" threshold. This is the ideal scenario for taking a trade. OK (Gold): Acceptable setup - R:R meets minimum but isn't optimal. Consider taking if other confluence factors align. BAD (Red): Poor setup - R:R below minimum threshold. Avoid this trade or wait for better entry. N/A (Gray): Cannot calculate - usually means no valid swing point detected yet. Best Practices: Use this indicator as a filter, not a signal generator. It tells you IF a trade makes sense, not WHEN to enter. Combine with your existing entry strategy - use Account Guardian to validate setups from other analysis. Adjust the swing lookback based on your timeframe. Lower timeframes may need smaller lookback values. Be honest with your account size input - accurate position sizing requires accurate inputs. Consider the target multiplier carefully. Higher multipliers mean larger potential reward but lower probability of hitting TP. Alerts The indicator includes four alert conditions: Good Long Setup: Triggers when long R:R reaches or exceeds your "Good R:R" threshold Good Short Setup: Triggers when short R:R reaches or exceeds your "Good R:R" threshold Bad Long Setup: Triggers when long R:R falls below your minimum threshold Bad Short Setup: Triggers when short R:R falls below your minimum threshold These alerts can help you monitor multiple charts and get notified when favorable setups appear. Technical Implementation The indicator is built using Pine Script v6 and includes: Pivot-based swing detection using ta.pivothigh() and ta.pivotlow() Dynamic box drawing for visual SL/TP zones Table-based dashboard for clean information display Color-coded visual feedback system Persistent variable tracking for swing levels Code Structure: // Swing Detection float swingHi = ta.pivothigh(high, swingLen, swingLen) float swingLo = ta.pivotlow(low, swingLen, swingLen) // R:R Calculation for Long float longSL = recentSwingLo float longRisk = entry - longSL float longTP = entry + (longRisk * targetMult) float longRR = (longTP - entry) / longRisk // Position Sizing float riskAmount = accountSize * (riskPct / 100) float posSize = riskAmount / longRisk Limitations The indicator uses historical swing points which may not always represent optimal SL placement for your specific strategy Position sizing assumes you can trade fractional units - adjust accordingly for instruments with minimum lot sizes R:R calculations assume linear price movement and don't account for gaps or slippage The indicator doesn't predict price direction - it only evaluates the mathematical viability of a setup Swing detection has inherent lag due to the lookback period required for pivot confirmation Recommended Settings by Trading Style Scalping (1-5 minute charts): Swing Lookback: 5-8 Target Multiplier: 1-2 Minimum R:R: 1.5 Good R:R: 2.0 Day Trading (15-60 minute charts): Swing Lookback: 8-12 Target Multiplier: 2 Minimum R:R: 2.0 Good R:R: 3.0 Swing Trading (4H-Daily charts): Swing Lookback: 10-20 Target Multiplier: 2-3 Minimum R:R: 2.5 Good R:R: 4.0 Why Risk/Reward Matters Many traders focus solely on win rate, but profitability depends on the combination of win rate AND risk/reward ratio. Consider these scenarios: 50% win rate with 1:1 R:R = Breakeven (before costs) 50% win rate with 2:1 R:R = Profitable 40% win rate with 3:1 R:R = Profitable 60% win rate with 1:2 R:R = Losing money Account Guardian helps ensure you only take trades where the math works in your favor, even if you're wrong more often than you're right. Disclaimer This indicator is provided for educational and informational purposes only. It is not intended as financial, investment, trading, or any other type of advice or recommendation. Trading involves substantial risk of loss and is not suitable for all investors. The calculations provided by this indicator are based on historical price data and mathematical formulas that may not accurately predict future price movements. Position sizing recommendations are estimates based on user inputs and should be verified before placing actual trades. Always consider factors such as leverage, margin requirements, and broker-specific rules when determining actual position sizes. The Risk-to-Reward ratios displayed are theoretical calculations based on swing point detection. Actual trade outcomes will vary based on market conditions, execution quality, and other factors not captured by this indicator. Past performance does not guarantee future results. Users should thoroughly test any trading approach in a demo environment before risking real capital. The authors and publishers of this indicator are not responsible for any losses or damages arising from its use. Always consult with a qualified financial advisor before making investment decisions.
Pine Script® 인디케이터
officialjackofalltrades의