SFP SCANNERV2

6일 전

==============================
📌 SFP SCANNER — QUICK GUIDE (EN)
==============================

🎯 Goal
Automatically scan Swing Failure Patterns (SFPs) on pivot-based support and resistance levels, using a multi-timeframe, structural and filterable approach.

👉 This indicator is designed to be mainly used with alerts on watchlists.
The more permissive the filters are, the more signals (and noise) you will get.

--------------------------------------------------
🧱 1) Pivot Levels — Pivot Timeframe
--------------------------------------------------
Levels are built using classic pivots.

Settings:
• Pivot timeframe: timeframe used to compute pivots (e.g. 4H)
• Pivot source:
- Wicks = highs / lows
- Closes = closing prices
• Left / Right: number of bars required to validate a pivot

➡️ A pivot is confirmed only after “Right” bars.
👉 Recommendation: minimum 15 / 15 on H4.

--------------------------------------------------
🎨 Level Display
--------------------------------------------------
• Pivot High → resistances
• Pivot Low → supports
• Colors, width and style are visual-only settings

--------------------------------------------------
📍 2) SFP Detection — Counting Timeframe
--------------------------------------------------
SFPs are detected on the “Counting timeframe”, regardless of the chart timeframe.

Bearish SFP (resistance):
1) Close above the level (breakout)
2) Close back below the level (reclaim)
3) Breakout duration must respect:
- Min bars breakout
- Max bars breakout
(counted in counting timeframe bars)

Bullish SFP (support):
Mirrored logic:
1) Break below
2) Reclaim above
3) Min / Max bars respected

--------------------------------------------------
🧠 3) Trend Filter — Moving Averages (optional)
--------------------------------------------------
If enabled:
• MA50 > MA200 → only Bullish SFPs allowed
• MA50 < MA200 → only Bearish SFPs allowed

Settings:
• MA timeframe:
- Blank = counting timeframe
- Recommended: pivot timeframe
• MA type: SMA or EMA
• Fast / Slow MA: default 50 / 200

--------------------------------------------------
🧱 4) Structural Support / Resistance Filter
--------------------------------------------------
This filter is independent from the MA filter.

Structure pivots count (N):
• Number of consecutive supports / resistances used to validate structure.

Checkbox logic (restrictive):
👉 If no checkbox is selected → all SFPs are allowed.

Bullish SFPs allowed if:
• Supports are rising
• Resistances are rising

Bearish SFPs allowed if:
• Resistances are falling
• Supports are falling

➡️ Each checkbox acts as an independent restriction.
At least one selected condition must be true to allow the SFP.

--------------------------------------------------
🛑 5) Anti-spam
--------------------------------------------------
• One-shot per level
➡️ Once triggered, the level is considered consumed.

--------------------------------------------------
🔎 6) Levels to Scan
--------------------------------------------------
• Number of recent pivot levels (supports + resistances) checked for SFP detection.

--------------------------------------------------
🕒 7) Multi-timeframe Display
--------------------------------------------------
Regardless of the chart timeframe:

• Chart > Counting timeframe:
A lower-timeframe SFP is displayed on the higher-timeframe candle.

• Chart = Counting timeframe:
The SFP appears directly on the candle at close.

• Chart < Counting timeframe:
The signal is displayed at the opening of the next counting timeframe candle.

--------------------------------------------------
🔔 TradingView Alerts
--------------------------------------------------
• Bullish SFP
• Bearish SFP

--------------------------------------------------
⚙️ Suggested Settings (Day trading / 1–2 day swing)
--------------------------------------------------
• Pivot timeframe: 4H
• Counting timeframe: 15m (or 5m for more signals)
• Levels to scan: 1 to 2
• Structure pivots count (N): 2 to 3
• Min bars breakout: 2 to 3
• Max bars breakout: 5 to 10

✅ Happy scanning and good trades! 😄

4일 전

릴리즈 노트

==============================
📌 SFP SCANNER — QUICK GUIDE (EN)
==============================

🎯 Goal
Automatically scan Swing Failure Patterns (SFPs) on pivot-based support and resistance levels, using a multi-timeframe, structural and filterable approach.

👉 This indicator is designed to be mainly used with alerts on watchlists.
The more permissive the filters are, the more signals (and noise) you will get.

--------------------------------------------------
🧱 1) Pivot Levels — Pivot Timeframe
--------------------------------------------------
Levels are built using classic pivots.

Settings:
• Pivot timeframe: timeframe used to compute pivots (e.g. 4H)
• Pivot source:
- Wicks = highs / lows
- Closes = closing prices
• Left / Right: number of bars required to validate a pivot

➡️ A pivot is confirmed only after “Right” bars.
👉 Recommendation: minimum 15 / 15 on H4.

--------------------------------------------------
🎨 Level Display
--------------------------------------------------
• Pivot High → resistances
• Pivot Low → supports
• Colors, width and style are visual-only settings

--------------------------------------------------
📍 2) SFP Detection — Counting Timeframe
--------------------------------------------------
SFPs are detected on the “Counting timeframe”, regardless of the chart timeframe.

Bearish SFP (resistance):
1) Close above the level (breakout)
2) Close back below the level (reclaim)
3) Breakout duration must respect:
- Min bars breakout
- Max bars breakout
(counted in counting timeframe bars)

Bullish SFP (support):
Mirrored logic:
1) Break below
2) Reclaim above
3) Min / Max bars respected

--------------------------------------------------
🧠 3) Trend Filter — Moving Averages (optional)
--------------------------------------------------
If enabled:
• MA50 > MA200 → only Bullish SFPs allowed
• MA50 < MA200 → only Bearish SFPs allowed

Settings:
• MA timeframe:
- Blank = counting timeframe
- Recommended: pivot timeframe
• MA type: SMA or EMA
• Fast / Slow MA: default 50 / 200

--------------------------------------------------
🧱 4) Structural Support / Resistance Filter
--------------------------------------------------
This filter is independent from the MA filter.

Structure pivots count (N):
• Number of consecutive supports / resistances used to validate structure.

Checkbox logic (restrictive):
👉 If no checkbox is selected → all SFPs are allowed.

Bullish SFPs allowed if:
• Supports are rising
• Resistances are rising

Bearish SFPs allowed if:
• Resistances are falling
• Supports are falling

➡️ Each checkbox acts as an independent restriction.
At least one selected condition must be true to allow the SFP.

--------------------------------------------------
🛑 5) Anti-spam
--------------------------------------------------
• One-shot per level
➡️ Once triggered, the level is considered consumed.

--------------------------------------------------
🔎 6) Levels to Scan
--------------------------------------------------
• Number of recent pivot levels (supports + resistances) checked for SFP detection.

--------------------------------------------------
🕒 7) Multi-timeframe Display
--------------------------------------------------
Regardless of the chart timeframe:

• Chart > Counting timeframe:
A lower-timeframe SFP is displayed on the higher-timeframe candle.

• Chart = Counting timeframe:
The SFP appears directly on the candle at close.

• Chart < Counting timeframe:
The signal is displayed at the opening of the next counting timeframe candle.

--------------------------------------------------
🔔 TradingView Alerts
--------------------------------------------------
• Bullish SFP
• Bearish SFP

--------------------------------------------------
⚙️ Suggested Settings (Day trading / 1–2 day swing)
--------------------------------------------------
• Pivot timeframe: 4H
• Counting timeframe: 15m (or 5m for more signals)
• Levels to scan: 1 to 2
• Structure pivots count (N): 2 to 3
• Min bars breakout: 2 to 3
• Max bars breakout: 5 to 10

✅ Happy scanning and good trades! 😄