PINE LIBRARY

LibraryPrivateUsage001

업데이트됨

This is a public library that include the functions explained below. The libraries are considered public domain code and permission is not required from the author if you reuse these functions in your open-source scripts

릴리즈 노트

updated

릴리즈 노트

updated.

릴리즈 노트

updated

릴리즈 노트

updated

릴리즈 노트

Library "LibraryPrivateUsage001"
This is a public library (used for math operations) that includes the functions explained below. The libraries are considered public domain code and permission is not required from the author if you reuse these functions in your open-source scripts. Before using this library you better check the House Rules.

isFine(l1, l2, index, v1) checks if l1/l2 is between v1 and v2
Parameters:
l1: float
l2: float
index: then number of elements in the array to compare
v1: and v2 the values to compare with l1/l2
Returns: true if l1/l2is between v1 and v2

getRMinmax1(mima, arr, const) assigns maximum and minimum values to the array mima
Parameters:
mima: is the array to set max/min
arr: is the array to get values to compare
const: is the array to get constant values that used while calculating max/min
Returns: changes the mima array and set the elements to get max/min that is calculated using values and contants

getRMinmax3(mima, arr, const, loc) assigns maximum and minimum values to the array mima
Parameters:
mima: is the array to set max/min
arr: is the array to get values to compare
const: is the array to get constant values that used while calculating max/min
loc: the index of the element in the const array
Returns: changes the mima array and set the elements to get max/min that is calculated using values and contants

getRMinmax2(mima, arr, const, loc) assigns maximum and minimum values to the array mima
Parameters:
mima: is the array to set max/min
arr: is the array to get values to compare
const: is the array to get constant values that used while calculating max/min
loc: the index of the element in the const array
Returns: changes the mima array and set the elements to get max/min that is calculated using values and contants

checkType1(thiscond, rates_array, arr) checks if thiscond is true and elements of rates array is between the elements of rates_array
Parameters:
thiscond: to check if it's true
rates_array: to get values to compare
arr: keeps the values to compare them with the elements of rates_array
Returns: true if all conditions met

checkType2(thiscond, rates_array, arr) checks if thiscond is true and elements of rates array is between the elements of rates_array
Parameters:
thiscond: to check if it's true
rates_array: to get values to compare
arr: keeps the values to compare them with the elements of rates_array
Returns: true if all conditions met

checkType3(thiscond, rates_array, arr) checks if thiscond is true and elements of rates array is between the elements of rates_array
Parameters:
thiscond: to check if it's true
rates_array: to get values to compare
arr: keeps the values to compare them with the elements of rates_array
Returns: true if all conditions met

checkType4(thiscond, rates_array, arr) checks if thiscond is true and elements of rates array is between the elements of rates_array
Parameters:
thiscond: to check if it's true
rates_array: to get values to compare
arr: keeps the values to compare them with the elements of rates_array
Returns: true if all conditions met

checkType5(thiscond, rates_array, arr) checks if thiscond is true and elements of rates array is between the elements of rates_array
Parameters:
thiscond: to check if it's true
rates_array: to get values to compare
arr: keeps the values to compare them with the elements of rates_array
Returns: true if all conditions met

checkType10(thiscond, rates_array, arr) checks if thiscond is true and elements of rates array is between the elements of rates_array
Parameters:
thiscond: to check if it's true
rates_array: to get values to compare
arr: keeps the values to compare them with the elements of rates_array
Returns: true if all conditions met

checkType11(thiscond, rates_array, arr) checks if thiscond is true and elements of rates array is between the elements of rates_array
Parameters:
thiscond: to check if it's true
rates_array: to get values to compare
arr: keeps the values to compare them with the elements of rates_array
Returns: true if all conditions met

checkType12(thiscond, rates_array, arr) checks if thiscond is true and elements of rates array is between the elements of rates_array
Parameters:
thiscond: to check if it's true
rates_array: to get values to compare
arr: keeps the values to compare them with the elements of rates_array
Returns: true if all conditions met

checkType13(thiscond, rates_array, arr) checks if thiscond is true and elements of rates array is between the elements of rates_array
Parameters:
thiscond: to check if it's true
rates_array: to get values to compare
arr: keeps the values to compare them with the elements of rates_array
Returns: true if all conditions met

CheckRtype1(vals, consts) checks conditions and if the conditions met then get max/min values and assign them to elements mima array
Parameters:
vals: array to to get values
consts: array of constant values
Returns: mima array if all conditions met

CheckRtype2(vals, consts) checks conditions and if the conditions met then get max/min values and assign them to elements mima array
Parameters:
vals: array to to get values
consts: array of constant values
Returns: mima array if all conditions met

setPPLocs(pre_loc, arr, index) checks mima array and if conditions met assigns the elements of pre_loc array
Parameters:
pre_loc: keeps the elements that is set when conditions met
arr: is an array which keeps the values to compare
index: is an integer value that is used as index while assigning values to pre_loc array
Returns: mima is the array that keeps max/min values

릴리즈 노트

v8

Added:
checkType14(thiscond, rates_array, arr) checks if thiscond is true and elements of rates array is between the elements of rates_array
Parameters:
thiscond: to check if it's true
rates_array: to get values to compare
arr: keeps the values to compare them with the elements of rates_array
Returns: true if all conditions met

checkType15(thiscond, rates_array, arr) checks if thiscond is true and elements of rates array is between the elements of rates_array
Parameters:
thiscond: to check if it's true
rates_array: to get values to compare
arr: keeps the values to compare them with the elements of rates_array
Returns: true if all conditions met

findmaxup(ylev, arr, mindis, index) checks arr array and if distance is greater than mindis
Parameters:
ylev: is used to check level
arr: is an array which keeps the values to compare
mindis: is the distance
index: is start value for the loop
Returns: the location in arr

findmaxdown(ylev, arr, mindis, index) checks arr array and if distance is greater than mindis
Parameters:
ylev: is used to check level
arr: is an array which keeps the values to compare
mindis: is the distance
index: is start value for the loop
Returns: the location in arr

find_x_loc(x, a) used find right level
Parameters:
x: and xl is used for x
a: and al is used for a
Returns: xl for x

get_minmax(mvar) used find minmax value from the array
Parameters:
mvar: is used to search which part
Returns: levels and ind

릴리즈 노트

v9

Added:
checksmType(mc_arr, allvalues, const_array, mh_arr, mk_arr) checks checksmType using all values and the const arrays
Parameters:
mc_arr: keeps c values
allvalues: keeps all values variables
const_array: keeps constant values
mh_arr: keeps h values
mk_arr: keeps l values
Returns: dloc variable if all conditions met

릴리즈 노트

v10

Added:
getPredictedPatterns(thiscond, pprates, xtod, pp, pp_loc, D, side) search all types according to thiscond array
Parameters:
thiscond: is the array that keeps if element is enabled
pprates: keeps the contstant values for related element
xtod: keeps all values
pp: keep the valus if there is any suitable
pp_loc: keep the locs if there is any suitable
D: is the last point
side: keeps the side
Returns: pp and pp_loc arrays

릴리즈 노트

v11

Added:
fxl(x, a) used find right level
Parameters:
x: and xl is used for x
a: and al is used for a
Returns: xl for x

gmm(mvar) used find minmax value from the array
Parameters:
mvar: is used to search which part
Returns: levels and ind

getpps(thiscond, ppr, xtod, pp, ppl, D, sd) search all types according to thiscond array
Parameters:
thiscond: is the array that keeps if element is enabled
ppr: keeps the contstant values for related element
xtod: keeps all values
pp: keep the valus if there is any suitable
ppl: keep the locs if there is any suitable
D: is the last point
sd: keeps the sd
Returns: pp and ppl arrays

Updated:
findmaxup(ylv, arr, mindis, index) checks arr array and if distance is greater than mindis
Parameters:
ylv: is used to check level
arr: is an array which keeps the values to compare
mindis: is the distance
index: is start value for the loop
Returns: the location in arr

findmaxdown(ylv, arr, mindis, index) checks arr array and if distance is greater than mindis
Parameters:
ylv: is used to check level
arr: is an array which keeps the values to compare
mindis: is the distance
index: is start value for the loop
Returns: the location in arr

Removed:
isFine(l1, l2, index, v1) checks if l1/l2 is between v1 and v2

setPPLocs(pre_loc, arr, index) checks mima array and if conditions met assigns the elements of pre_loc array

find_x_loc(x, a) used find right level

get_minmax(mvar) used find minmax value from the array

getPredictedPatterns(thiscond, pprates, xtod, pp, pp_loc, D, side) search all types according to thiscond array

릴리즈 노트

v12

Added:
checkcondtype1(cond, allina, allinp, add) checks conditions and remove the element if condition is not met
Parameters:
cond: condition to compare
allina: keeps all conditions
allinp: if condition is not met remove the element from this array
add: used to calculate index
Returns: none

checkcondtype2(cond, allina, allinp, add) checks conditions and remove the element if condition is not met
Parameters:
cond: condition to compare
allina: keeps all conditions
allinp: if condition is not met remove the element from this array
add: used to calculate index
Returns: none

Updated:
getRMinmax1(mima, c1, c2, a1, a2) assigns maximum and minimum values to the array mima
Parameters:
mima: is the array to get max/min
c1: first c value
c2: second c value
a1: first a value
a2: second a value
Returns: changes the mima array and set the elements to get max/min that is calculated using values and contants

getRMinmax2(mima, c1, c2) assigns maximum and minimum values to the array mima
Parameters:
mima: is the array to set max/min
c1: first c value
c2: second c value
Returns: changes the mima array and set the elements to get max/min that is calculated using values and contants

CheckRtype1()

CheckRtype2()

getpps()

Removed:
getRMinmax3(mima, arr, const, loc) assigns maximum and minimum values to the array mima

checkType1(thiscond, rates_array, arr) checks if thiscond is true and elements of rates array is between the elements of rates_array

checkType2(thiscond, rates_array, arr) checks if thiscond is true and elements of rates array is between the elements of rates_array

checkType3(thiscond, rates_array, arr) checks if thiscond is true and elements of rates array is between the elements of rates_array

checkType4(thiscond, rates_array, arr) checks if thiscond is true and elements of rates array is between the elements of rates_array

checkType5(thiscond, rates_array, arr) checks if thiscond is true and elements of rates array is between the elements of rates_array

릴리즈 노트

v13

Updated:
CheckRtype1(vals, consts) checks conditions and if the conditions met then get max/min values and assign them to elements mima array
Parameters:
vals: array to to get values
consts: array of constant values
Returns: mima array if all conditions met

CheckRtype2(vals, consts) checks conditions and if the conditions met then get max/min values and assign them to elements mima array
Parameters:
vals: array to to get values
consts: array of constant values
Returns: mima array if all conditions met

getpps(thiscond, ppr, xtod, pp, ppl, D, sd) search all types according to thiscond array
Parameters:
thiscond: is the array that keeps if element is enabled
ppr: keeps the contstant values for related element
xtod: keeps all values
pp: keep the valus if there is any suitable
ppl: keep the locs if there is any suitable
D: is the last point
sd: keeps the sd
Returns: pp and ppl arrays

릴리즈 노트

v14

Removed:
getRMinmax1(c1, c2, a1, a2) finds minimum of the maximums and set the array

getRMinmax2(c1, c2, a1, a2) finds minimum of the maximums and set the array

checkcondtype1(cond, allina, allinp, add) checks the condition and if condition is not met then removes the element

checkcondtype2(cond, allina, allinp, add) checks the condition and if condition is not met then removes the element

릴리즈 노트

v15

Added:
getRMinmax1(mima, c1, c2, a1, a2) assigns maximum and minimum values to the array mima
Parameters:
mima: is the array to keep max/min
c1: first var of part1
c2: second var of part1
a1: first var of part2
a2: second var of part2
Returns: none

getRMinmax2(mima, c1, c2) assigns maximum and minimum values to the array mima
Parameters:
mima: is the array to keep max/min
c1: first var
c2: second var
Returns: none

checkcondtype1(cond, allina, allinp, add) removes the element if the condition is not met
Parameters:
cond: the condition to check
allina: keeps constant values
allinp: the array which the function removes the element
add: is the index for the arrays
Returns: null

checkcondtype2(cond, allina, allinp, add) removes the element if the condition is not met
Parameters:
cond: the condition to check
allina: keeps constant values
allinp: the array which the function removes the element
add: is the index for the arrays
Returns: null

Updated:
getpps(thiscond, allina, xtod, D, sd, drw) search all types according to thiscond array
Parameters:
thiscond: is the array that keeps if element is enabled
allina: keeps constant values
xtod: keeps all values
D: is the last point
sd: keeps the sd
drw: keeps if it's enabled or not
Returns: pp and ppl arrays

Removed:
CheckRtype1(vals, consts) checks conditions and if the conditions met then get max/min values and assign them to elements mima array

CheckRtype2(vals, consts) checks conditions and if the conditions met then get max/min values and assign them to elements mima array

릴리즈 노트

v16

Added:
getthepoints(allpoints, side, mplen, mploc) finds all possible points by using allpoints array
Parameters:
allpoints: contains all points in it
side: keeps the current side
mplen: keeps the length of mp
mploc: keeps the location of mp
Returns: apat array that contains possible points

파인 라이브러리

진정한 TradingView 정신에 따라, 저자는 이 파인 코드를 다른 파인 프로그래머들이 재사용할 수 있도록 오픈 소스 라이브러리로 공개했습니다. 저자에게 박수를 보냅니다! 이 라이브러리는 개인적으로 사용하거나 다른 오픈 소스 출판물에서 사용할 수 있지만, 이 코드를 출판물에서 재사용하는 것은 하우스 룰에 의해 관리됩니다.