지표
Engulfing Zone Finder (Box) by vinafxEngulfing Zone (EG) Finder is an overlay indicator that automatically detects and draws boxes for two types of momentum-based price action patterns: Engulfing Zones and Outside Bar Zones .
🔷 Engulfing Zone (EG)
An Engulfing Zone forms when a sequence of candles results in a breakout candle (BO) that closes beyond the high or low of an origin candle. Unlike the traditional 2-candle engulfing pattern, this indicator allows intermediate candles between the origin and the breakout candle, capturing a broader range of momentum shifts.
Bullish Engulfing Zone
The origin candle is a bearish candle.
A subsequent bullish candle closes above the high of the origin candle — this is the breakout (BO) candle.
A box is drawn from the origin candle to the BO candle, with the top and bottom set to the high and low of the origin candle .
The box is drawn with a green border by default.
Bearish Engulfing Zone
The origin candle is a bullish candle.
A subsequent bearish candle closes below the low of the origin candle — this is the breakout (BO) candle.
A box is drawn from the origin candle to the BO candle, with the top and bottom set to the high and low of the origin candle .
The box is drawn with a red border by default.
Smart filtering logic built in:
Origin Shift : If a new candle of the same type sweeps the wick of the current origin candle, it automatically replaces the origin. For example, if a new bearish candle has a higher high than the existing bearish origin, the new candle becomes the origin.
Opposite Break Invalidation : If price closes beyond the opposite side of the origin candle before a valid breakout occurs, the origin is discarded.
Nested Zone Filtering : If a smaller EG zone exists inside a larger one (same type), the indicator keeps the smaller zone and removes the larger one, reducing visual clutter.
Max Candle Duration : A configurable limit (default: 5) controls the maximum total number of candles from origin to BO (inclusive). This prevents excessively long zones.
🔶 Outside Bar Zone (OB)
An Outside Bar Zone is a 2-candle pattern where the second candle completely engulfs the first candle's range (higher high AND lower low), and both candles share the same direction.
Bullish Outside Bar Zone
Two consecutive bullish candles.
The second candle has a higher high and a lower low than the first.
The second candle's close is above the high of the first candle.
A box is drawn covering the first candle, with a green border by default.
Bearish Outside Bar Zone
Two consecutive bearish candles.
The second candle has a higher high and a lower low than the first.
The second candle's close is below the low of the first candle.
A box is drawn covering the first candle, with a red border by default.
⚙️ Settings
Engulfing Zone Settings (Bullish / Bearish)
Show/Hide: Toggle visibility for each zone type independently.
Border Color: Customize the box border color.
Background Color: Customize the box fill color and transparency.
Outside Bar Zone Settings
Show/Hide: Toggle visibility for Bullish and Bearish OB Zones independently.
Border Color / Background Color: Fully customizable for each type.
Performance & Limits
Max Total Candles (Origin to BO) : Controls how many candles (including origin and BO) are allowed to form an EG zone. Default is 5. Set to 0 for no limit.
Max Pending Origin Candles : Limits the number of origin candles tracked simultaneously. Default is 100.
Max Total Boxes Displayed : Limits the total number of boxes drawn on the chart across all zone types. The quota is shared flexibly — if one type produces fewer boxes, the remaining capacity is available for other types. Default is 200. TradingView maximum is 500.
📝 Notes
This indicator is an overlay and draws directly on the price chart.
It works on all timeframes and all instruments (stocks, forex, crypto, futures, etc.).
Doji candles (where close equals open) are included in the detection logic. A Doji is treated as both bearish and bullish, so it can serve as an origin candle, a breakout candle, or part of an Outside Bar pattern.
The indicator uses open-source Pine Script v5. No external data requests or repainting techniques are used.
지표
Fake Pin Bar & Engulfing Pattern DetectorFake Pin Bar & Engulfing Pattern Detector
This indicator is designed to detect Fake Pin Bar structures and standard Engulfing candle patterns directly on the chart.
A Fake Pin Bar is a price action pattern that appears after price forms a Mother Bar, then one or more Inside Bars, and finally produces a false breakout candle. The signal candle briefly breaks outside the Mother Bar range, but then returns back inside the structure. If that breakout candle also has a strong rejection wick and a relatively small body, the indicator marks it as a Fake Pin Bar.
The idea behind this pattern is simple: price attempts to break above or below a consolidation area, fails to continue, and closes back inside the previous range. This can show rejection, trapped breakout traders, or a possible reversal area.
How The Indicator Works
The script looks for three main components:
1. Mother Bar
A candle that defines the main high and low range.
2. Inside Bar Sequence
One or more candles after the Mother Bar that remain inside the Mother Bar range.
3. False Breakout Pin Bar
The signal candle must break only one side of the Mother Bar range and then return back inside it. For a bearish signal, price breaks above the Mother Bar high and rejects downward. For a bullish signal, price breaks below the Mother Bar low and rejects upward.
The indicator also detects standard bullish and bearish Engulfing patterns. An engulfing pattern is detected when the current candle body fully engulfs the previous candle body in the opposite direction.
Best Use Cases
This indicator is best used as a price action confirmation tool, not as a standalone trading system.
It can be useful around:
- Support and resistance areas
- Supply and demand zones
- Previous session highs and lows
- Liquidity sweep areas
- Consolidation breakouts
- Higher timeframe key levels
- Trend pullbacks
- Range boundaries
Fake Pin Bars are generally more meaningful when they appear at important market levels instead of random areas in the middle of a chart.
Settings
Minimum Wick Ratio
Controls how large the rejection wick must be compared to the full candle range. A higher value requires a stronger wick and produces fewer signals.
Maximum Body Ratio
Controls the maximum allowed candle body size compared to the full candle range. A lower value requires a smaller body and makes the pin bar condition stricter.
Maximum Inside Bar Count
Defines how many Inside Bars the script can look for after the Mother Bar. A higher value allows the indicator to detect longer consolidation structures.
Confirm Signals After Bar Close
When enabled, signals are confirmed only after the candle closes. This helps avoid signals changing during the live candle.
Require Body Inside Mother Bar
When enabled, the signal candle body must return fully inside the Mother Bar range. This makes Fake Pin Bar detection stricter.
Show Engulfing Candles
Turns standard bullish and bearish Engulfing candle detection on or off.
Show Pattern Details
Shows or hides the Mother Bar pattern box and high/low guide lines.
Label Text Size
Changes the size of the Fake Pin Bar signal labels.
Inside Bar Area Opacity
Controls the opacity of the pattern area shown on the chart.
Bullish Candle Color
Sets the color used for bullish Engulfing candles.
Bearish Candle Color
Sets the color used for bearish Engulfing candles.
Important Notes
This indicator does not place trades, does not calculate stop loss or take profit levels, and does not provide financial advice.
Signals should be combined with market structure, trend direction, volume, support/resistance, and proper risk management.
No price action pattern is perfect. Fake breakouts and engulfing candles can fail, especially in low-volume or choppy market conditions. 지표
Alpha Terminal Studio (G-ALPHA)🚀 Alpha Terminal Studio (G-ALPHA)
The Alpha Terminal Studio (G-ALPHA) is an institutional-grade, multi-modular trading terminal environment designed to unify advanced market geography, institutional liquidity mapping, structural trend vectors, and algorithmic order-flow confirmation into a single, high-performance cohesive layout. Rather than cluttering the workspace with fragmented overlays, G-ALPHA operates as a multi-timeframe quantitative command center, offering 100% control through a highly optimized, compact user interface grid.
The core objective of G-ALPHA is to eliminate retrospective retail bias by providing traders with real-time mathematical confluence zones, precise institutional stop-hunting layers, and probabilistic execution triggers natively scaled to asset volatility.
Unlike traditional indicators that operate on fixed, lagging metrics, G-ALPHA incorporates dynamic Multi-Timeframe (MTF) request engines, adaptive Average True Range (ATR) risk parameters, and algorithmic volume profiling to deliver structural clarity across all asset classes and market regimes.
💡 Key Features
🎯 Multi-Timeframe Fibonacci Pivot Engine:
Reconstructs static market geography by calculating mathematically precise Floor and Fibonacci pivot matrices from daily, weekly, or monthly boundaries. It projects dynamic expansion levels (Res 1–3) and liquidation exhaustion floors (Sup 1–3) directly onto the current asset margin.
🧠 Fractional Fibonacci MA Ribbon Wave:
Features a fully decoupled, split moving average ribbon matrix based on pure Fibonacci sequences (lengths stretching individually from micro 3 to macro 4827). Arranged in an ultra-compact inline settings grid, it allows traders to selectively plot independent momentum waves without cluttering interface panels.
🕵️♂️ Smart Confluence Alert Detector:
An algorithmic scanning layer that continuously measures the spatial proximity between active structural lines (MAs, Kijun-sen, and Fibo levels). When multiple independent variables overlap within a 0.15% tight mathematical threshold, the corresponding data panel dynamically flashes in high-contrast Gold—instantly identifying a high-probability institutional inflection point.
📊 Institutional Volume Profile POC Tracker:
An embedded micro-volume engine that scans the active lookback horizon to locate the exact price level featuring the highest dense transaction concentration (Point of Control - POC). It anchors a structural step-line across the canvas, verifying where large institutional block orders are heavily capitalized.
🏹 Automated Price Action Trigger Signals:
Monitors real-time micro-structure interactions exactly as price contacts major G-ALPHA levels. The moment structural Pinbars (Hammers/Shooting Stars) or Engulfing vectors develop inside institutional zones, the system executes instant green/red directional execution arrows (▲/▼).
🧬 Algorithmic Multi-Mode Candle Coloring Studio:
Provides advanced hedge-fund grade visual overlays on price action. Traders can cycle between 4 unique quantitative candle filters: Ichimoku Sentiment Trend, ATR Volatility Intensity, Extreme Fibo Threat Zones, and Signal Pattern Confirmations.
📋 Multi-Timeframe Trend Matrix Dashboard:
Deploys a sleek, semi-transparent monitoring table in the upper-right canvas corner. It keeps you synchronized with the broader market trend by scanning multi-timeframe order flow (5M, 15M, 1H, and Daily) against major balance vectors simultaneously.
🏦 Liquidity Pools & Stop Hunting Zones:
Scans major market swings over a 50-bar rolling index to automatically highlight overhead and underlying liquidity pools. It projects transparent Order Block frames where retail stop-losses are concentrated, allowing traders to anticipate institutional "Stop Hunts."
🌍 Global Session Profile Overlays:
Tracks macroeconomic volume handovers by casting precise dikey cross-sections at the exact opening brackets of major global trading seans (Asia, London, and New York).
🔬 Mathematical Logic and Structure
G-ALPHA is built on a multi-layer quant framework designed to strip out microstructure noise and isolate definitive institutional block orders.
The process initiates by capturing prior-period high-low-close matrices over user-selected horizons via strict lookahead-safe request modules. These raw data sets are converted into standard floor distribution scales and multiplied by custom Fibonacci extension variables ($0.382$, $0.618$, and $1.000$).
Simultaneously, the indicator deploys individual mathematical arrays to calculate specific moving average paths. For trend-direction parsing, the algorithm computes Ichimoku Kijun-sen vectors, determining the absolute midpoint of high and low ranges over a 26-period lookback window across multiple dimensions:
Kijun-sen = (Highest High(26) + Lowest Low(26)) / 2
To handle risk management algorithmically, the studio tracks market volatility via an integrated Average True Range (ATR) function. The resulting values are mathematically compiled and printed straight inside the right margin data boxes, giving traders instantaneous, dynamic Trailing Stop Loss and Multi-Stage Take Profit price marks mapped precisely to current asset volatility.
All structural calculations are evaluated globally to guarantee script stability and prevents runtime execution lag, ensuring that the canvas rendering engine delivers clean, non-repainting coordinates in real-time.
🛠️ How to Use
1. Confluence Mapping:
Look for the right-side data boxes to turn into a Gold alert color. This tells you a Fibonacci level is perfectly lining up with an active MA or Kijun-sen line, creating an institutional "Hot Zone."
2. Structural Execution:
When price tests a key G-ALPHA channel, wait for a green/red Trigger Arrow to confirm the presence of institutional absorption. Ensure the upper-right MTF Matrix aligns with your directional execution.
3. Volatility Risk Control:
Utilize the automated brackets printed right next to the active levels. Take entry positions near the Fibo floors, set your risk strictly at the printed mark, and target the corresponding and coordinates.
4. Liquidity & Seans Filter:
Avoid shorting a resistance level if a major "Buy Liquidity Pool" sits right above it, especially during New York session openings, as market makers are highly probable to hunt those levels first.
🎛️ Settings Dashboard Control
* Core Engine Settings: Toggles labels and configures multi-timeframe request horizons.
* Trend & Ribbon Dashboard: Features an inline compact grid layout to selectively toggle independent MA lengths and Kijun vectors.
* Quant Studio & Plugins: Configures smart confluences, Volume POC tracks, ATR lengths, Liquidity modules, and Session trackers.
* Candle Overlay Profile: Dropdown menu selector to switch between various mathematical bar-coloring systems.
* Theme & Styling Controls: Complete visual customization over colors, line weights, and line styles (Solid, Dashed, Dotted).
📌 Credits and Origins
G-ALPHA is engineered by gunebak4n as an advanced, multi-modular terminal workspace designed to bridge the gap between complex multi-timeframe analytics and seamless execution. The architecture is intentionally optimized for professional traders, systematic strategy developers, and technical purists who require strict mathematical objectivity and a clean, clutter-free workspace.
The model prioritizes script execution speed, visual grid alignment, and complete parameters flexibility without compromising deep institutional analytical data.
⚠️ Disclaimer
All analytical outputs, signals, and values generated by Alpha Terminal Studio (G-ALPHA) are purely probabilistic and non-deterministic. This indicator does not guarantee future price direction, market outcomes, or trading profitability. It is a mathematical structure tool intended to assist disciplined decision-making under market uncertainty. Proper position sizing and independent risk management are mandatory requirements at all times. 지표
지표
Candle EfficiencyCandle Efficiency
Candle Efficiency reveals the true strength behind each candle by looking inside it. Two candles can have the exact same size and color yet tell completely different stories: one may have moved in a clean, decisive push, while the other crawled there through constant back-and-forth. The standard chart hides this, because a candle is only a summary of what happened inside it. This indicator breaks each candle down into its lower-timeframe components and measures how efficient the move really was, then highlights only the candles that moved with genuine conviction.
HOW IT WORKS
For every candle on your chart, the indicator pulls all the candles from a lower timeframe that make up that candle (it "dissects" the candle). It then compares two things:
- Net movement: the absolute distance from open to close of the candle (how far price actually advanced, in clean terms).
- Total internal movement: the sum of the open-to-close moves of every lower-timeframe candle inside it (how much price moved in total, including all the back-and-forth).
Efficiency = Net movement / Total internal movement
A value close to 1 means the move was direct and strong: price went almost in a straight line, with little wasted motion. A value close to 0 means the move was choppy and weak: lots of internal movement that cancelled itself out and barely advanced. A large green candle built from one clean push is efficient; a same-sized green candle built from hesitation, pauses and reversals is inefficient, even though both look identical on the chart.
AUTO-CALIBRATION
Two things adjust automatically so the indicator works on any market and any timeframe without manual tuning:
- Inner timeframe: chosen automatically to keep a constant ratio (around 16 lower-timeframe candles inside each chart candle). On a 4h chart it uses 15m, on 1h it uses 5m, on 15m it uses 1m, and so on. You can change the target ratio or set the inner timeframe manually if you prefer.
- Strength threshold: the indicator measures the recent average efficiency of the current asset and only highlights candles whose efficiency clearly exceeds that average (by default, 1.3 times the average). This means "strong" always adapts to what is normal for that specific asset and timeframe, instead of relying on a fixed value that would only fit one market.
WHAT YOU SEE
Only strong candles are colored: bright green for strong bullish candles, bright red for strong bearish ones. Every other candle (weak or average) stays neutral gray. At a glance you only see where there was real conviction behind the move, with no noise from the ordinary candles.
HOW TO USE IT
Basic reading: the bright candles mark moves made with genuine strength. A breakout, a trend leg or an impulse confirmed by a bright candle carries real conviction behind it; the same move shown as a gray candle is weak and far more suspect. It helps separate moves that have fuel from moves that are just drifting.
Reading the shift of control (advanced): because the indicator shows which side is moving with strength, it makes changes of control visible before price fully confirms them. Watch for this sequence at the end of a trend:
- In a downtrend: while sellers are in control, the strong candles are red. When the decline starts turning gray (red candles stop being strong), the trend is losing conviction even though price is still falling. If strong green candles then begin to appear on the bounces, control is shifting to buyers, and a reversal to the upside becomes likely.
- In an uptrend: the mirror image. Strong green candles dominate the rise, then the top turns gray (green candles lose their strength), and the appearance of strong red candles signals control passing to sellers and a likely reversal down.
The gray phase is the key early warning: it shows the trend running out of strength before the actual turn, which is information you cannot get from price alone. The arrival of a strong candle of the opposite color then confirms the change of control.
NOTES
The indicator relies on lower-timeframe data, so it needs the inner timeframe to be smaller than the chart timeframe. On assets without volume data it still works, since the efficiency calculation is based on price movement, not volume. Like any tool, it describes what has already happened (it is reactive, not predictive) and works best as a reading aid alongside your own structure and levels, not as a standalone signal. 지표
Trend Structure Scale-In👋 What's up traders,
Decided to finally share this one after a lot of testing, tweaking, and more chart staring than I'd like to admit.
Trend Mitigation Scale-In Pro is built around a simple idea: trade with the trend, wait for quality pullbacks, and let probabilities do the heavy lifting.
The strategy combines:
• EMA200 trend filtering
• Pivot structure detection
• Engulfing candle confirmation
• Mitigation-based entries
• Controlled scale-ins on pullbacks
• Fixed basket take-profit management
The goal isn't to catch every move. It's to stay aligned with the bigger trend and focus on higher-quality setups while keeping execution simple.
Like every strategy, it's not perfect and should always be tested thoroughly before being used on a live account.
I'm constantly building, testing, and improving new ideas, so feedback is always appreciated.
If you find it useful, a ⭐ Favorite, 👍 Like, or 🚀 Boost helps more than you think and motivates me to keep sharing.
Wishing everyone green charts and disciplined trading. 🏆
Good luck out there.
— Tomukasss
전략
지표
지표
지표
지표
지표
지표
ARBF v1.4ARBF (Asia Range, Bias, Fair Value Gaps) is an intraday tool built around a single daily decision: which way price commits after the Asian session, and where it is likely to react on the way there.
It combines three ideas that normally live in separate indicators into one workflow.
ASIA RANGE AND DAILY BIAS
The script marks the high and low of the Asian session (default 19:00 to 02:59 New York time, fully configurable) and draws the range as a box with optional extended levels into London and New York. During a configurable signal window (default London open onward) it watches for the first candle that closes beyond the Asia high or low. A close above the high sets a bullish bias for the day, a close below the low sets a bearish bias. Only the first break is taken, so the bias is fixed once and not repainted afterward.
FAIR VALUE GAPS WITH BODY VS WICK CLASSIFICATION
Three-candle imbalances are detected and drawn as zones. Each gap is classified: if a candle body closes fully beyond the gap it is treated as strong (solid border), if only a wick pierces it the gap is treated as weak and more likely to be retested (dashed border). Gaps are removed once price mitigates them, and there is an age limit so the chart stays clean. An alert can fire when price re-enters an unmitigated gap that aligns with the active daily bias.
BALANCED PRICE RANGE (BPR)
When a bullish and a bearish gap overlap in the same price area, that overlap is a Balanced Price Range, often a strong reaction zone. This version keeps a short-term memory of recently swept gaps, so a BPR is still recognised when one gap is filled and an opposite gap forms in the same area shortly after. The memory window and size are adjustable.
HOW TO USE IT
1. Let the Asian range complete.
2. Wait for the bias signal during your chosen window.
3. Trade only in the direction of that bias, using unmitigated FVGs and BPR zones in that direction as your areas of interest for entries and reactions.
4. Use the alerts to be notified when price reaches a relevant gap or BPR.
NOTES
Credits: Farouk Seascalper
All session logic is forced to New York time and is daylight-saving aware. Times in the inputs are New York hours. The included alert text references XAUUSD as an example only; the indicator works on any symbol and timeframe, though it is designed for intraday charts. This is an analysis tool, not financial advice, and signals should be confirmed with your own process. 지표
LTF Imbalance V2LTF Imbalances
A multi-timeframe Fair Value Gap (FVG) indicator that lets you view lower timeframe imbalances from any higher timeframe chart. Designed for SMC and ICT traders who need precision entry confluences without switching charts.
What it does
Scans five lower timeframes simultaneously — 1s, 5s, 15s, 30s, and 1m — and plots unmitigated imbalance zones directly on your chart. Each timeframe has its own colour and can be toggled independently, so you can layer up exactly the confluences you want without visual noise.
Key Features
Multi-TF FVG Detection — Identifies bullish and bearish imbalances across all five timeframes in real time using request.security_lower_tf()
Three Mitigation Modes — Choose how a zone is considered filled: close inside the gap, wick into the gap, or wick fully through. Mitigated boxes are automatically deleted to keep the chart clean
Minimum Gap Size Filter — Set a pip/point threshold to eliminate micro noise. Works across forex, indices, and commodities (recommended: 1.0 for forex, 5–20 for indices)
Pivot Proximity Filter — Optionally restrict displayed zones to only those forming near structural pivot highs and lows, helping focus attention on the highest-probability imbalances
Legend Table — An on-chart table showing each timeframe's status (ON/OFF) with a live colour swatch, fully configurable in position and size
Clean Labelling — Each zone is labelled with its timeframe and direction (▲ bullish / ▼ bearish) for instant identification at a glance
How to use it
Load the indicator on any timeframe higher than 1s. Toggle the timeframes you want to monitor, set your minimum gap size for the instrument you're trading, and optionally enable the pivot proximity filter for confluence-only zones. Use alongside your preferred market structure or order block indicator for high-probability SMC entries.
Notes
Requires a TradingView plan that supports request.security_lower_tf() (Essential or higher)
1s data is only available on supported symbols and brokers
Best used on the 1m–15m chart during active sessions such as London Open or New York Open 지표
지표
지표
지표
Super Chachin Classic Fibonacci Pivots with Price-Action SigOVERVIEW
Chachin Pivots Pro is an intraday support/resistance tool that plots two complementary families of daily pivot levels — classic floor-trader pivots and Fibonacci pivots — and adds a volatility-filtered price-action layer that highlights reversal candles forming right at those levels. It is built for the 5-minute chart and works on forex, gold and index markets.
WHY THESE COMPONENTS ARE COMBINED (and how they work together)
Most pivot indicators draw a single set of levels and stop there, leaving you to judge by eye whether price is actually reacting. This script combines three elements on purpose, each one covering a weakness of the others:
Classic pivots (PP, R1–R4, S1–S4) come from the standard floor-trader formula and tend to mark the broad reaction zones most intraday traders watch.
Fibonacci pivots (0.382 / 0.618 / 1.000 of the prior day's range) are calculated with a different formula and often land at slightly different prices. They are included alongside the classic levels precisely because of where they disagree: when a classic level and a Fib level cluster together, that confluence marks a stronger zone than either level alone. The two sets are not redundant — their overlap is the information.
Price-action signals are the timing layer. The script flags a bullish engulfing candle near a support level and a bearish rejection candle near a resistance level. A pivot tells you where price might turn; the candle tells you whether it is actually turning there right now.
The piece that binds them into one system is the ATR proximity filter. "Near a level" is defined in volatility-adjusted terms (a multiple of ATR) rather than a fixed distance, so a signal only appears when a reversal candle forms within a meaningful distance of a pivot — and the same settings behave sensibly on a quiet EUR/USD session and a fast XAU/USD session without retuning. This is what makes the three parts act as one tool instead of three scripts stacked on a chart.
HOW THE LEVELS ARE CALCULATED
Central Pivot: PP = (prev High + prev Low + prev Close) / 3
Classic R1 / S1: 2·PP − prev Low and 2·PP − prev High
Classic R2 / S2: PP + range and PP − range (range = prev High − prev Low)
R3/R4 and S3/S4: further range projections for high-volatility days
Fibonacci pivots: PP ± 0.382·range, PP ± 0.618·range, PP ± 1.000·range (the 0.618 level is usually the most respected)
All levels are built from the previous, already-closed daily candle, so they are fixed for the whole session and do not repaint. Old lines are cleared at the start of each new day to keep the chart clean.
THE PRICE-ACTION SIGNALS
🟢 BULL — a bullish engulfing candle that closes within ATR-proximity of a support pivot (PP / S / FS).
🔴 BEAR — a bearish rejection candle within ATR-proximity of a resistance pivot (PP / R / FR).
Signals are confirmed on bar close and are meant as context, not as automatic buy/sell instructions.
HOW TO USE IT
Add it to a 5-minute chart of a liquid instrument (e.g. XAU/USD, EUR/USD, an index).
Use the Central Pivot (PP) for daily bias: trading above it leans bullish, below it leans bearish.
Watch how price behaves at the pivots, paying special attention to confluence zones where a classic level and a Fibonacci level stack on top of each other.
Treat a BULL/BEAR signal at one of those zones as a heads-up to look for your own entry, using the next pivot as a logical target and the level behind the signal as a logical invalidation point.
Optional alerts are available for PP crosses, key breakouts/breakdowns, and the candle signals.
SETTINGS
Show Classic Pivots / Show Fibonacci Pivots / Show Labels — toggle each layer on or off.
Proximity to level (× ATR) — how close price must be to a level for a signal to fire (higher = more permissive).
Colours for the central pivot, classic levels, Fibonacci levels and signals are fully editable.
INPUT-MENU TRANSLATION (the UI is in Spanish)
"Mostrar Pivots Clásicos" → Show Classic Pivots
"Mostrar Pivots Fibonacci" → Show Fibonacci Pivots
"Mostrar Etiquetas" → Show Labels
"Mostrar Señales" → Show Signals
"Proximidad a nivel (x ATR)" → Proximity to level (× ATR)
"Pivot Central" → Central Pivot · "Niveles Clásicos" → Classic Levels · "Niveles Fibonacci" → Fibonacci Levels
This is an educational tool for identifying support and resistance. It is not financial advice, and the past behaviour of any level does not guarantee future results.
지표
HTF Candle Volume Profile [ChartPrime]🔶 OVERVIEW
Traders often lose sight of the "big picture" when focused on lower timeframe (LTF) price action. The HTF Candle Volume Profile bridges this gap by projecting Higher Timeframe (HTF) candles—such as Daily or 4-Hour bars—directly onto your current chart.
Unlike standard HTF candles, this indicator includes a **built-in Volume Profile for each candle**, revealing exactly where the most trading activity occurred within that specific higher timeframe period.
🔶 KEY CONCEPTS: SYNTHETIC PROJECTION
This tool uses a "projection" method, meaning it draws the HTF candles and their profiles to the right of the current price action. This prevents chart clutter and allows you to compare the internal volume structure of the current and previous HTF candles side-by-side.
Synthetic Candles: Represents the OHLC (Open, High, Low, Close) of the higher timeframe.
Intra-Candle Volume Profile: A horizontal histogram built into the candle body showing volume distribution.
Point of Control (POC): The specific price level within the HTF candle that saw the highest volume.
🔶 VISUAL COMPONENTS
Projected Candle Slots: You can display up to four candles:
* Candle 1 (C1): The currently forming HTF candle (updates in real-time).
* Candles 2-4 (C2-C4): The most recent historical closed HTF candles.
POC Level Lines: A dashed orange line (customizable) extends from the profile back across your chart, marking the "fairest price" of that HTF period.
High/Low Level Lines: Dotted lines marking the extremes of the HTF candles, providing immediate targets for liquidity sweeps or support/resistance.
Price Labels: Optional tags that display the exact price of the High, Low, and POC for precise order entry.
🔶 INDICATOR PARAMETERS
Timeframe (HTF): Choose the "Anchor" timeframe (e.g., set to "D" while trading on the 15m chart).
Profile Bins: Adjust the resolution of the volume histogram. Higher values provide a more granular look at price "nodes."
Projection Offset: Moves the projected candles further to the right to keep your current price action clear.
Style Controls: Fully customize the colors for bullish/bearish candles and the Point of Control.
🔶 TRADING APPLICATIONS
Identifying Institutional Value: The POC of an HTF candle is where "Big Money" is most active. When price returns to a previous HTF POC, it often finds significant support or resistance.
Trend Confirmation: Watch the "Migration" of the POC. If the POC of C1 is higher than the POC of C2, the HTF trend is healthily bullish.
Targeting Liquidity: The High and Low level lines projected by the indicator act as natural "draws on liquidity." Traders often look for price to sweep these HTF levels before looking for a reversal.
🔶 CONCLUSION
The HTF Candle Volume Profile is an essential tool for multi-timeframe analysis. It allows you to see not just *where* price went on a higher timeframe, but *how much business* was conducted at every price point along the way. 지표
전략
지표
50-MA Extension Dot [ATR / % / Points]50-MA Extension Dot marks when price has moved a defined distance above a daily moving-average anchor. The goal of the script is to help traders study when price becomes extended relative to its daily trend structure, rather than judging a move by price alone.
The script supports three extension methods: ATR Extension, Percent, and Points. ATR Extension compares the distance from price to the daily moving average against the instrument’s daily ATR, making the reading volatility-adjusted. Percent mode measures how far price is above the moving average in percentage terms. Points mode measures the raw point distance above the moving-average anchor.
The moving-average type, moving-average length, threshold method, threshold value, ATR length, and extension source are customizable so traders can study past moves and build their own rules. For example, users can test how a symbol historically behaved when it became one ATR, two ATRs, a fixed percentage, or a fixed point distance above its daily moving-average reference.
When the selected threshold is reached, the script plots a small dot above the candle. The dot is not a standalone buy or sell signal. It is a visual marker showing that price has reached a defined extension zone relative to the chosen daily moving-average reference.
The script can also display the daily moving average, an optional threshold line, and a small table showing the current daily moving average, daily ATR, extension price, percentage distance from the moving average, ATR percentage, and ATR extension value.
This tool is useful for studying stretched moves, breakout extensions, momentum exhaustion, and conditions where price may be moving too far too quickly above its daily trend anchor. Because different symbols have different volatility profiles, the customizable inputs allow traders to compare past extensions and develop rules that fit their own process.
This indicator does not predict future price movement. It is a contextual extension tool designed to measure distance from a daily trend reference and help traders research historical extension behavior. 지표
